Used Plotter Uv for sale (1,197)

Condition: new, Year of construction: 2026, Available working areas (mm) 500×300, 950×600, 1300×900, 1600×1200, 1600×2000 Njdpfx Aon Nvydsdtocl Power of the laser resonator 75W-160W

Condition: used, Oki Color Painter E-64S Machine is not in working order (see picture) Cartridges are also available separately... Nodjxf Hl Iepfx Adtscl

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm Nsdoxn Nlvjpfx Adtocl - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: used, Year of construction: 2003, Offset 6 color with coating Roland 706/3B+LTTLV (UV) Year: 2003 Nsdpfsuhtg Aex Adtscl Number of impressions (mio): 500 Machine control - RCI - IntelliTrax II density control Feeder - Non-Stop feeder - Logistic system in feeder Printing units - Number of printing unit(s): 6 - Straight machine - APL Full Automatic Plate Change - Automatic blanket washing device - Cooling system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 2 - Number of transfer unit(s): 2 - Tresu chambered ductor blade system - Number of Anilox roller(s): 2 Drying - IR dryer between coating unit 1 and 2 - IR + hot-air dryer in delivery - UV dryer in delivery: Eltosch Delivery - Non-Stop delivery - Powder spray: Grafix Cantronic 3000 - Logistic system in delivery Elevation - Machine raised by (cm): 50 Accessories - Air cabinet: Becker - Cabinets air cooled - Compressed air compressor, excluded

Condition: good (used), Semi-automatic can seamer for rectangular cans, in good condition. Ncjdpfexupygex Adtsl

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Ncodpfx Ajxz Ewnjdtjl

Condition: excellent (used), Year of construction: 2017, operating hours: 150 h, functionality: limited functionality, UV printer with Toshiba printheads Print width 180 cm Ncsdpfx Asw R Uxzedtjl

Condition: like new (used), functionality: fully functional, machine/vehicle number: D362931, Year of construction: 2023, total length: 500 mm, total height: 400 mm, total width: 510 mm, overall weight: 80 kg, input voltage: 220 V, power: 0.3 kW (0.41 HP), The DWS UV Curing Unit XL is a professional large-format post-curing system, specifically recommended by the Italian manufacturer DWS for their SLA 3D printers. This XL curing unit is equipped with a high-performance UV light source to ensure consistent and reliable heat and light distribution. Thanks to its high precision and intensity, it can cure printed objects fully automatically in just a few minutes. In addition to the XL model, DWS also offers the S2 and M curing units, which differ in size and curing capacity. The DWS UV Curing Unit XL provides an impressive curing volume specifically matched to the build platform dimensions of the DWS XPRO Series printers. The unit is equipped with a timer that allows users to set the exact curing duration (up to 180 minutes). It also features user-friendly, intuitive controls and an ergonomic design. Safety is prioritized through features such as an intelligent door lock system and forced internal ventilation, enhancing operator comfort and security. Designed for professional SLA 3D printing workflows, the DWS UV Curing Unit XL serves as a crucial final step in the manufacturing process. It completes the secondary curing of models produced on DWS SLA printers. Even if models are perfectly shaped, they still require additional UV exposure for complete polymerization and structural stabilization. Post-curing improves not only the visual quality and smoothness of the model but, more importantly, its durability and resistance. Curing Volume The DWS UV Curing Unit XL offers a generous curing volume of 19.7 x 15.7 x 20 in (500 x 400 x 510 mm), which can accommodate the entire build platform of DWS printers like the XPRO S, XPRO SL, XPRO Q, and XPRO QL, including their HR versions. Ncsdpfxsx Ehg Ho Adtel Controls The XL curing unit features straightforward and convenient controls for seamless operation. Activation is via a standard on/off button. An integrated 2.4” OLED display enables precise curing time setting—up to 180 minutes—ideal for processing large batches of SLA 3D printed components. Design The DWS UV Curing Unit XL features a sturdy white enclosure with two doors fitted with pink-tinted transparent windows. Its robust construction and ergonomic design make it suitable for a wide range of professional applications, such as prototyping, end-use part production, jewelry, digital dentistry, automotive, aerospace, and more. The device measures 30 x 27.8 x 31.8 in (761 x 705 x 806.5 mm) and has a weight of approximately 172 lbs (78 kg). Price The DWS UV Curing Unit XL is priced at $21,490.00, justified by its large curing volume, advanced features, and overall efficiency. Technical data summary: - Curing volume: 500 x 400 x 510 mm - Timer setting: 0 to 180 minutes - Internal ventilation: Forced ventilation - Display: 2.4” OLED - Inner dimensions: 670 x 660 x 590 mm - Manufacturer: DWS (Italy) - Safe door opening: Yes - Light source: UV LED - Outer dimensions: 761 x 705 x 806.5 mm - Power consumption: 300W - Power supply: 100–240V / 50–60 Hz - Weight: 78 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: D362931, Year of construction: 2023, total length: 265 mm, total height: 300 mm, total width: 330 mm, overall weight: 12 kg, input voltage: 220 V, power: 0.05 kW (0.07 HP), The DWS UV Curing Unit S2 is a professional post-curing solution specifically designed for SLA 3D printers, developed by the renowned Italian manufacturer, DWS. This S2 model is equipped with a high-efficiency UV light source, ensuring consistently even heat and light distribution for reliable, repeatable curing performance. Its robust UV intensity and precision allow for rapid, fully automated curing of printed objects within minutes. The DWS range also includes the M and XL curing units, which offer different curing chambers and capacities for various production needs. The S2 provides the most compact curing volume in the DWS lineup, ideal for single-part polymerization. It features a programmable timer (up to 30 minutes), enabling users to precisely control the curing cycle. Its intuitive controls, user-friendly interface, and compact footprint make it especially suitable for professional environments with limited space. The S2 also prioritizes user safety with practical features such as a secure automatic door lock and forced internal ventilation for heat management and operator protection. Purpose-built for professional SLA 3D printing workflows, the S2 serves as a crucial post-processing unit for models produced on DWS SLA printers. After initial printing, models require additional UV exposure for complete polymerization and structural stabilization. This secondary curing step not only enhances surface finish and smoothness but most importantly, ensures long-term durability and mechanical resistance. Curing Volume: The S2 offers a chamber measuring 160 x 160 x 160 mm (6.3 x 6.3 x 6.3 in), optimized for single part curing and effective polymerization. Controls: Operation is straightforward with a standard on/off switch and an integrated timer allowing settings up to 30 minutes, sufficient for the majority of SLA post-curing applications. The unit features a robust, white exterior with a pink-tinted transparent door, combining an aesthetically pleasing design with ergonomic convenience. Its compact size and professional appearance make it well-suited for a range of industries, including prototyping, small-batch production, jewelry manufacturing, dental labs, automotive repairs, and aerospace applications. Technical Specifications: - Curing volume: 160 x 160 x 160 mm - Timer range: 0–30 minutes - Forced internal ventilation - Internal dimensions: 216 x 266 x 219 mm - Manufacturer: DWS, Italy - Safety door mechanism: Yes - Light source: UV LED - External dimensions: 265 x 300 x 330 mm - Power consumption: 50W Nedpfxox Ehfpo Adtjcl - Power supply: 90–264V / 50–60Hz - Weight: 11.8 kg Price: The DWS UV Curing Unit S2 is priced at $1,990.00, reflecting its advanced curing capacity, professional feature set, and operational efficiency.

Condition: good (used), Year of construction: 2014, PCS-G Off Press Controls S Type Straight Machine Ryobimatic AAC Dampening Palletfeeder RPC Semi Automatic Plate Change Grafix: Powder Sprayer High Pile Delivery Technotrans Alpha C. Refrigeration Panasonic LED UV Kurutucu (Delivery) Nodpfxeudltgo Adtocl Automatic Blanket Washing Device Combi Rollers in all Units Densitometer Intellitrax Automatic Paper Size Adjustment Automatic Paper Thickness Adjustment Impression Account: 98 Mio.

Condition: used, Year of construction: 1996, UV system UV light dryer IST STRAHLTECHNIK Lignocurve Model HL - 160 -1 H DL Nedpfxjx Hglaj Adtjcl UV tubes T 1600 U1 UV range 180-450 nm

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: efficient: - Turbo system: 25% higher system performance thanks to state-of-the-art application technology, all with the same space requirements! - Reduced throughput times due to optimized program automation for fast UV systems - Up to 70% cost savings compared to casting and spraying, thanks to the use of solvent-free systems and single-operator control flexible: - Cost-effective single-operator operation with return function or, alternatively, continuous operation for two-person operation - Expandable: The system can be upgraded with additional roller, smoothing, or sanding units ergonomic: - Simple operation thanks to ergonomic controls service-friendly: - Cleaning cycle and quick-change system process-safe: - Top-quality surfaces, precisely reproducible Included: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying tunnel, 1 lamp 60/80/120 W Working height: 850 - 950 mm Application roller, rubberized: D=238 mm Dosing roller, chrome-plated: D=174 mm Njdpfx Adswka Hlstecl Passage height: 3–120 mm UV lamp module: 80/120 W mercury Connected load: approx. 21 kW Dimensions: 1300 x 3080 mm Availability: short notice Location: Röllbach

Condition: good (used), Good working condition. Please check out our other listings as well. Nedpfx Aoqmiwajdtscl

Condition: new, Year of construction: 2025, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Ncjdpfx Ajr D Ngtjdtjl Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, functionality: limited functionality, machine/vehicle number: Biocap DNA, Used Captair Biocap DNA UV sterilization cabinet Manufacturer: Captair / Erlab Model: BiocapDNA Voltage: 230V (50Hz) Ncedpexliivjfx Adtel

Condition: new, Year of construction: 2026, CNC knife, creasing and cutting plotter, cutting plotter, creasing plotter Machine configuration: Drives: Helical hardened ground X, Y ball screw Z axis Linear bearing: Trapezoidal rails Travel speed: 80 m/min Program resolution: 0.005 mm (0.0025 servo motors) Positioning accuracy: 0.01 mm Double-sided gate drive: yes Electrospindle power: 7.5Kw S6 Maximum electrospindle speed: 24000 rpm Electrospindle inverter: yes Brushless electrospindle: yes Cutter shank diameters: from 1 to 20 mm Construction: Steel welded Power supply: 400 V Possible additional options: - tool cooling - positioning bases with control - central lubrication system - Pneumatic extraction foot - Manual manipulator - 10-position linear magazine - 1.50 mm pneumatic oscillating knife - Creasing head - Circular knife - Material height sensor Nodpfx Ast N Stxedtecl - Tool length and diameter sensor - 24-inch touchscreen monitor - Remote service access - 244 m3 vacuum pump with control system - Gate angle auto-calibration - Intelligent energy recovery - Safety fence Material fixing: Vacuum, pneumatically controlled sections with expansion valve Control Real-time industrial control system steel and soft metals: aluminum, brass, copper, bronze etc. composites: dibond, alucobond, etc. plastics: polycarbonate, PVC, plexiglass, teflon, polyamides, gambit, rubber, etc. solid wood and wood-based panels: plywood, chipboards, MDF, OSB, etc. paper, cardboard, foil, etc. foams, extruded materials, etc. leather, textiles etc. #plotter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Pywood #plytawiorowa #Chipboard #steel #aluminum #aluminum #brass #stainless steel #cast iron #polypropylene #polycarbonate #acrylic #fermacell

Condition: new, Year of construction: 2026, Machine for processing sinks made of materials such as sintered quartz, granite, granite composites and ceramic models, etc. Technical data: MILLING PLOTTER 1325 PRO+ WORKING AREA 1300X2500MM Z AXIS RANGE 700MM - PRO OMRON SERVO AC HIGH SPEED DRIVES (SET WITH PLANETARY GEARS) 1.5KW ETHERCAT INTELLIGENT ENERGY RECOVERY OSAI OPENSMART REAL-TIME INDUSTRIAL CONTROL SYSTEM, CYCLE TIME BELOW 2MS, SUPPORT UP TO 16 AXES, ETHERCAT COMMUNICATION WITH THE CONTROL CABINET AUTO CALIBRATION OF THE GATE ANGLE Nodpfsualqqex Adtocl EUCHNER HBA-103037 HAND MANIPULATOR CONTROL CABINET AIR CONDITIONING TOOL LENGTH SENSOR (60MM) AUTOMATIC CENTRAL LUBRICATION WITH SKF SOLID GREASE BEAM SYSTEM PNEUMATIC CLAMPS SINK FIXING SYSTEM DUST REMOVAL CHANNELS BALL SCREW COVER ON THE Z AXIS BLOWING SYSTEM FOR RIDING ELEMENTS VACUUM SENSOR SYSTEM DOUBLE SCRAPER SET

Condition: new, Year of construction: 2026, Technical data Control system Multi-axis real-time interpolator, with active trajectory forecasting, LAN communication, EtherCat, 2ms sampling time, optional RTCP tool end tracking, correction map Working area X 600 – 2500mm Y 900 – 6100 mm Gate clearance and Z axis range 100 – 700 mm Drive system Omron servo drives with EtherCat protocol, X, Y helical slats hardened ground in accuracy class 6, Z axis ball screw with accuracy class 5 Linear bearing Trapezoidal rails, Bosch Rexroth 25 Speed Up to 90 m/min Acceleration Up to 1G Program resolution Up to 0,0001mm Positioning accuracy 0,01 mm Gate drive double-sided master / slave with gate angle correction Electrospindles 2 kW to 18 kW powered by an inverter Tool taper ISO30 or HSK63 ER32 Maximum speed of the electro-spindle 24000 rpm (option 6 000, 40 000, 50 000) Construction Steel welded, ribbed, stress relieved, precision machined Equipment options Ncjdpfxjn Nwifs Adtel positioning and correction of the material by means of a camera, laser, measuring probe linear, revolver tool magazine cooling the tool with mist, chilled air 3D laser or touch scanner positioning databases additional angular / rotary axes drilling units, angular active oscillating knife, roller knife, drag knife, creaser, marker pen pneumatic clamping clamps chip extraction installation Table type T-slot: aluminum profiles, solid aluminum, solid steel; vacuum; hybrid, pneumatic clamping clamps

Condition: new, Year of construction: 2026, Technical data Control system: Multi-axis real-time interpolator, with active trajectory forecasting, LAN communication, EtherCat, 2ms sampling time, optional RTCP tool end tracking, correction map. Working area: X 600 x 900 mm Y 3000 x 12000 mm Gate clearance and Z axis range: 100-1000 mm Drive system: Omron servo drives with EtherCat protocol, X, Y helical slats hardened ground in accuracy class 6, Z axis ball screw with accuracy class 5 Linear bearing: Trapezoidal rails, Bosch Rexroth 25 Speed: Up to 120 m / min Acceleration: Up to 1G Program resolution: up to 0.0001mm Positioning accuracy: 0.01 mm Gate drive: double-sided master / slave with gate angle correction Nsdpsn Hq Huefx Adtecl Electrospindles: 2 kW to 36 kW powered by an inverter Tool taper: ISO30 lub HSK63 ER32 Maximum speed of the electro-spindle: 24,000 rpm (option 6,000, 40,000, 50,000) Construction: Steel welded, ribbed, stress relieved, precision machined Equipment options positioning and correction of the material by means of a camera, laser, measuring probe linear, revolver tool magazine cooling the tool with mist, chilled air 3D laser or touch scanner positioning databases additional angular / rotary axes drilling units, angular active oscillating knife, roller knife, drag knife, creaser, marker pen pneumatic clamping clamps chip extraction installation integration with an industrial robot Table type: T-slot: aluminum profiles, solid aluminum, solid steel; vacuum; hybrid, pneumatic clamping clamps

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200 Nedeumvmkjpfx Adtjcl

Condition: used, for installation on an existing bar conveyor scope of delivery: Housing of the tube with exhaust fan and switch cabinet without cross bar conveyor - Producer Cefla - Type ECO LIGHT - Working width 1.300 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor - For mercury lamps - For gallium lamps - Mirror pivoting Nsdjvun Uyjpfx Adtecl - Total connection power 14,61 kW - Location - Voltage / HZ 400 / 50

Condition: used, Year of construction: 1998, machine/vehicle number: 71257/1, - Producer Cefla/Sorbini - Type Ecolight - Year of construction 1998 - Working width 1,300 mm Nodpfeumvp Ejx Adtjcl - working height 870 + - 20 mm - max. part height ~ 70 mm - Number of tubes from above 1 pc. - Tubes placed straight 1 pc. - Suitable for mercury tubes - Suitable for gallium tubes - Bar transport - Rod pitch ~ 95 mm - Feed adjustable 5 - 25 m/min - Length 1,500 mm + 500 mm - Volt,Hz 400 /50 - Total electrical connection 12.56 kW - Voltage fluctuations max. +/- 5 %

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes Njdpfetz Dg Uox Adtjcl - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request Nodpfxsu Afu Ro Adtjcl

Condition: used, for installation on an existing bar conveyor. Ncjdpjumvqcjfx Adtjl Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor