Used Plasma Cutting Drilling for sale (18,144)

Year of construction: 2002, condition: refurbished (used), Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Ncodpfx Adehzbi No Ajr Maximum current at 100%: 300A Automatic gas console

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Nedpfx Ajhzbipjd Aecr Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), overall weight: 2,400 kg, OXIPLASMA Kompak EKO 3100x1600mm Plasma Cutting Table Brand: OXIPLASMA Model: Kompak EKO 316 Ncjdpfx Adowlruke Aor Manufactured: 2018 (Installed at client for operation in 2021) Description: Useful cutting capacities: 3,100x1,600mm Travel speed: 30 m/min Positioning accuracy: +/- 0.1 mm Motorization: Brushless servos (4 interpolated servo motors (x, y1, y2, z)) Double guidance and traction system Height control managed by the CNC Anti-collision detector with inductive electromechanical impact control Suction table sectioned by zones using the CNC Hypertherm EDGE CONNECT CNC 19" touchscreen Useful head lift: 120 mm Weight: 2,400 kg Cutting capacity: Carbon steel: 32 mm Stainless steel: 20 mm Includes: - Hypertherm HPR 130 XD high-definition plasma equipment - Hypertherm gas console - ROLLAIR RLR 700 screw air compressor, 7.5 HP, year 2007, 10 Bar 5,402 hours - BEKO DryPoint RA air dryer

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Njdpfx Aoyug Ensd Ascr

Condition: good (used), Year of construction: 2010, Offer 25375 Technical Data: - Working area / cutting length with approx. 5 m rails: approx. 3000 mm - Working area / cutting width: approx. 1500 mm - Controller: BACH - Track gauge: approx. 1900 mm - 1 plasma torch with height adjustment - Plasma source: KJELLBERG Hi FOCUS 160 i - Cutting current at 100% duty cycle: 10 - 160 A - Cutting range (steel): approx. 5 - 50 mm - Cutting range (aluminium): approx. 5 - 35 mm - Cutting range (stainless steel): approx. 5 - 30 mm - Connection: 400 V / 35 kVA - Extraction table with extraction unit, make: TEKA, type: Filtercube 4 H, year 2010 Ncsdpfx Adoxnivzs Aer - Weight: approx. 4 t - Space requirement for system: approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction unit: approx. L 1.5 x H 3.5 x D 1.5 m

Condition: used, Plasma cutter CLOOS type CPS 40/80 Ncjdpfjdzqccsx Ad Ajr Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Ncjdpfx Ajdzqa Hsd Aor Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment Ncjdpfx Asibq Itod Aer total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: refurbished (used), functionality: fully functional, type of cooling: air, welding current (min.): 30 A, welding current (max.): 60 A, Note: This is a Trade-in For sale Schweißring Plasmacut 65P 30-60 AMP Cuts up to 30mm 400 Volt Refurbished, serviced, and tested Including Plasma torch, earth work cable with clampo, and air hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Nedpfjyk Tq Nox Ad Ajcr The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Ncsdpov I U Hcsfx Ad Aer Sold without cutting table.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Njdjyi Ub Hjpfx Ad Aecr Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Condition: new, Year of construction: 2021, machine/vehicle number: XPR300-005397, type of input current: three-phase, overall weight: 680 kg, input voltage: 360 V, cutting current: 300 A, ambient temperature (max.): 40 °C, We offer this new Hypertherm XPR300 plasma cutting source, year of manufacture 2021. Only the plasma source is for sale. New, unused. 2 plasma sources available. Forklift on site. Ncodpfjy Dqrfox Ad Ajr Manufacturer: Hypertherm Model: XPR300 Year of manufacture: 2021 Condition: new Category ID: 1448 Type ID: 2170 Type: plasma cutting machine If you have any questions or need further information, please send us a message or call us.

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit. Njdpfstp Dhpox Ad Aocr  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) Ncsdpfx Adjvpalao Aer ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: as good as new (ex-display), The Plasma-Jet AirPro Compact 1530 Maxpro is a state-of-the-art plasma cutting machine designed for the Plasma Cutting Machines category, offering exceptional performance within the compact product group. Built for efficiency and reliability, this system features a one-piece design that ensures easy transport and rapid setup, ideal for custom and small-series manufacturing environments. With a cutting length of 3,050 mm and a width of 1,550 mm, the machine can handle substantial cutting tasks while minimizing operating costs. It comes configured with high-performance features such as a powerful MAXPRO 200 plasma source, an intuitive PULSER 3 CNC unit, and professional ProNest LT nesting software. The machine utilizes EtherCAT technology for optimal CNC performance, while the robust linear guides provide accurate, long-lasting operation. In addition, a built-in collision guard protects against damage, and a magnetic coupling allows for quick maintenance. Invest in your workshop's capabilities today by requesting a quote for the Plasma-Jet AirPro Compact 1530 Maxpro – a precise solution in the Plasma Cutting Machines product group. Njdpfoyg Dg Tsx Ad Aocr

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 260 A, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: double-sided, We offer this used Ajan PP15088 AUTO plasma cutting machine, year of construction 2015. Working area: 2000 x 6000 mm Machine type: PP15088 AUTO Construction year: 2015 Ncodpsy Annbsfx Ad Ajr Input voltage: 380 V Phases: 3 Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2009, machine/vehicle number: 725, ECKERT plasma-gas cutting machine - JANTAR 2 Parameters: Working width 2500 mm Ncsdpfx Adsqntkie Ajr Working length 6000 mm Positioning accuracy +/- 0,005mm Thickness of plasma cutting - 35 mm Thickness of torch cutting - 120 mm Max thickness of sheet metal/cutting max 120 mm

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: EN 60204-1, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, cutting height (max.): 20 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, warranty duration: 12 months, working length: 3,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, height adjustment type: electric, We are offering this well-maintained Hugong INTECUT-HT plasma cutting machine / CNC portal cutting system KAI-TEC Smart, including marking function, year of manufacture 2025, as we are upgrading to a larger system. The machine was only purchased for a single project and has been in operation since August 2025. The manufacturer’s warranty is valid until August 2026. The system is fully functional, in excellent technical condition, and shows no signs of excessive wear. Only normal signs of use are present. It has become too small for our requirements, but it is ideally suited for smaller metal workshops, metal construction companies, or fabrication shops. Technical data & features: - CNC portal cutting system KAI-TEC Smart - Cutting area: approx. 1,500 × 3,000 mm - CNC control with cutting database - NEOCUT 105 plasma system with marking function Ncsdeyux Hqjpfx Ad Aer - Plasma cutting range: 1–20 mm mild steel (stainless steel & aluminium max. 10 mm) - Machine torch including hose package - Automatic torch height control - Laser pointer - FastCam7 nesting software - DXF / DWG import - Auto-nesting function - Remnant sheet nesting - Cut cost calculation Accessories: ✅ Spare and consumable parts included (e.g. nozzles, electrodes and other accessories – ready for immediate use) Other: - Sale due to new installation - Viewing and test run possible by arrangement - Collection by buyer - Price plus VAT Legal notice: The sale is made with exclusion of liability for material defects. No warranty, no guarantee, no returns. If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2019, functionality: fully functional, Plasma Cutting System Becky Job Master 6.20 with Extraction Table – Year 2019 This plasma cutting system is being sold due to an upgrade to a laser cutting machine. The machine is fully operational and can be inspected and tested under power. Location: Vorarlberg Technical Data Manufacturer / Model: Becky Job Master 6.20 Year of Manufacture: 2019 Working Area: 6,000 × 2,000 mm Z-Axis Travel: 300 mm Max. Cutting Speed: 75 m/min Ncsdpfx Asx U Dqijd Aor Dimensions: Machine Length: 8,000 mm Machine Width: 3,700 mm Overall Height: 2,000 mm Work Table Height: 820 mm All accessories belonging to the system are included, such as: Hypertherm XPR 170 power source Donaldson filtration unit Software etc. Sale excludes disassembly, transport, and installation.

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Ncodpoyx Svbsfx Ad Aor Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.

Condition: good (used), Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF Nodpfowpg I Tsx Ad Aocr -Dimensions: 295/175/H370 mm -Weight: 9.9 kg

Condition: like new (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 176063, table length: 4,000 mm, table width: 2,000 mm, Plasma cutting machine CORTA PS 3100 Year of construction 1991/retrofit, machine number: 176063 Cutting area: 4000 x 2000 mm Alternating operation of 2 cutting processes: 1x plasma cutting unit Stak Pak ll, 105 Ampere Nodpfx Adevfmiwj Ascr 1x oxyfuel cutting torch MG 12 SE 30 CPS control unit DNC connection Graphic base version Trajectory: 6000 mm 1 torch suspension MG 200 K arc-dependent scanning 1 plasma interlock Portal carriage, cross carriage Torch suspension MG 200 K Cutting table 4200 x 2100 x 700 mm Modular, technically advanced Stak Pak II plasma cutting system, 105 amps 1 control module CM 6032 3 power modules PM 6042 1 PCM 35 torch, 15 m 1 PCM 140 torch, 15 m 1 cooling module ex works

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Nedpewinpxjfx Ad Aocr Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected under power in Vilnius.

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Nsdpeyah R Nofx Ad Ajcr Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Year of construction: 2007, condition: ready for operation (used), - USED - CNC PLASMA CUTTING MACHINE WORKING AREA: 6000 x 2000 x 60 mm GENERATOR: HYPERTERM HPR130 CONTROL UNIT: GASPARINI MAX CUTTING SPEED: 0,1 - 30 m/min WEIGHT: 4400 Kg Nodpfxoyru Rgo Ad Aocr OVERALL DIMENSIONS: 6910 x 3150 x 1581 mm ACCESSORIES: FUME EXHAUSTER NOTE: MACHINE REVISED IN 2026