Used Pipe Thread for sale (4,937)

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Knjdpfx Ajz Ikzpeamoc Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Year of construction: 2003, condition: good (used), functionality: fully functional, Highly Automated CNC Pipe Bending Cell: Rosenberger RB20 Typical Applications The RB20 series is designed for the cold bending of pipes with one or more bends. It is used in industries such as the automotive industry, furniture manufacturing, and plant engineering, where precise, repetitive bends are required. Technical Features and Function Type: ROSENBERGER RB20 (manufactured in 2003) Knedpfxszz Hn Ij Aamoc Performance & Geometry: Servo-electric precision drive with a cold bending capacity of up to Ø 20 x 1.5 mm in steel. High flexibility thanks to freely selectable bending planes within the 78 mm die height and generous 3-axis travel ranges (X/Y/Z: 260 × 146 × 1,170 mm) Control Technology: The logic is managed by a robust Siemens Simatic S7-300 PLC, paired with an industrial operator panel from B&R Robotic Automation: Fully automatic handling (loading/unloading) via an integrated Motoman industrial robot, complete with XRC controller and the corresponding teach-in terminal for path programming. Product removal is carried out reliably via a discharge conveyor belt. Marking system (upgraded in 2021): A modern, high-performance VideoJet 1860 inkjet coder (manufactured in 2021) with microprocessor control enables direct product marking (e.g., lot numbers or barcodes) immediately after the bending process System Safety & Peripherals: CE-compliant safety measures via a SICK safety light curtain and a perimeter safety fence. Optical status indication via R

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Knodpozb Imajfx Aamsc Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Reference: F24 €8,500, as is

Condition: good (used), overall weight: 2,300 kg, spindle diameter: 0 mm, total height: 1,375 mm, total length: 1,645 mm, total width: 1,520 mm, One - Good used Profiroll Model UPWS 16 - 16 ton Hydraulic Thread Rolling Machine with swivelling spindles for in-feed or thru-feed rolling. Max threaded dia. 70mm Min. threaded dia. 3mm, Max width in=feed rolling: 150mm, rolling spindlle dia.: 69.85mm Ksdozt R T Espfx Aamsnc power of main motor: 6.5 kw Complete with coolant equipment, work rest blade holder and five sets of thread dies.

Condition: ready for operation (used), Year of construction: 2012, Wiemers AT 12 II Air Tapping Pneumatic Tapping Arm Thread Cutter Year of manufacture: 2012 Operating pressure: 6 – 7 bar Kedpfjymkrvjx Aamonc Air consumption: approx. 750 l/min Thread size: M3 – M12 Description has been adopted as provided. You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop to see our full range of offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Please note that deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: used, functionality: fully functional, overall weight: 7,500 kg, total length: 14,470 mm, total width: 3,500 mm, total height: 1,509 mm, We offer this used CSM automatic tube welding system, manufactured in 2014. Our general terms and conditions apply. Payment in advance required. Shipping costs not included. If you have any questions or require further information, please send us a message or call us. Kedpfez Hk Ersx Aamenc Recommended tube diameters: 5 - 15 mm Wall thicknesses: 0.40 - 1.00 mm Using the profiling unit, a stainless steel strip from a coil is formed into a tube by passing through seven profiling stations. The continuously profiled tube is welded in the welding chamber (TIG) in a continuous process. The torch tracking system can detect and automatically correct changes in the position of the material joint relative to the arc during the welding process. A measuring wheel mounted on the continuously moving tube continuously measures its speed and records the length. A double straightening device eliminates any residual curvature of the tube during the continuous process. A flex unit continuously cuts the tube and places it on the sorting rail for tubes that meet or do not meet the quality requirements. Two deburring stations deburr the tube ends, and an automatic length measurement system measures each tube before it is placed in the box. The tube welding system is fully functional and can be inspected while in operation.

Condition: excellent (used), overall weight: 1,350 kg, spindle diameter: 40 mm, type of input current: three-phase, total height: 1,500 mm, total length: 1,000 mm, total width: 1,000 mm, One - Very Good Used ORT Model RP10/U - 10 ton Hydraulic Thread Rolling Machine with swivelling spindles for in-feed or thru-feed rolling Max. threaded diameter: 30mm Min.threaded diameter: 2mm Max. width in-feed rolling: 65mm Knjdpozt R Rwefx Aamsc Power of main motor: 4 kw Complete with coolant equipment , work rest blade holder ,open fronted spindle front supports for easy access with small dia. components - 13 set of in-feed thread dies

Condition: good (used), Thread gauge ring, thread gauge ring, go gauge ring, reject gauge ring Knjdpfxj Abak Hs Aamsc -Threaded training rings: 11 good training rings -Thread sizes: M12 to M55 -Nominal dimensions: see photos -Submission/Price: complete -Transport dimensions: 100/100/H160 mm -Weight: 3.3 kg

Condition: good (used), Pressing tool, sheet metal former, forming tool, straightening tool, special punches/mandrel elements, centering or positioning tool -Manufacturer: Mubea, Punching tool: Pipe notching tool, 18 pieces -Matrices: 8 pieces, sizes 1" to 1 1/4" -Stamps: 10 pieces, sizes 1" to 2" -Quantity/Dimensions: see photos/parts list Knsdpfx As Aa Tlhsamec -Submission/Price: complete -Transport dimensions: 360/170/H45 mm 170/150/H30 mm -Weight: 10.7 kg / 3 kg

Condition: good (used), mileage: 684,130 km, power: 338 kW (459.55 HP), first registration: 01/2011, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro5, Equipment: AdBlue, electric window regulation, spoiler, = Additional options and accessories = Knedpozqdn Rsfx Aamjc - Roof spoiler - Closed cab - Cab = Notes = YV2RT40A2TB557523 Volvo FH 460 EEV 6x2 Manual Euro 5 Auxiliary heater 680,000 km 01-18-2011 MANUAL Straight exhaust pipes = Further information = Year of manufacture: 2011 Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Tire size: 385/55R22.5; Lift axle; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Number of cylinders: 6 Technical condition: good Optical condition: good

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Kedpfxoymlx De Aamsnc Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Kodezycraspfx Aamjnc

Condition: good (used), Thread cutting head with chaser jaws, pipe thread cutter, thread cutting stock, hand thread cutting stock, thread cutting stock, cutting stock set, ratchet thread cutting stock -Manufacturer: LUX, Hand Thread Cutting Stock Set 541 424 -Cutting stocks: R1/2", R3/4", R1", R1 1/4", 1 ratchet lever -Transport case -Dimensions case: 360/340/H100 mm Knsdpfx Aasvmhfpjmoc -Weight: 5.4 kg

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm & 80mm - Power of main motor: 7.5kw Knedpfx Aaeyml Ekjmoc With one pair of spindle sleeves 69.85mm i.d. x 80mmo.d. & 17 sets thread dies 60mm, 120mm & 180mm wide from M6 to M24 Photographs taken before reconditioning

Condition: good (used), functionality: fully functional, total height: 2,350 mm, total width: 1,200 mm, total length: 2,750 mm, overall weight: 3,500 kg, workpiece weight (max.): 1,000 kg, Workpiece diameter: ø25 - 630 mm (min-max) Torch stroke: 1500 mm Chuck through-hole: ø200 mm Cutting speed: 2000 mm/min Max. workpiece weight: 1000 kg PLC Controller: Siemens C7-633 Cutting process: Plasma cutting or oxy-fuel cutting Country of origin: Germany Machine (L×W×H): 275 x 120 x 235 cm Machine weight: ca. 3500 kg Kedpfx Aez H Nzfsamsnc

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: NT2012, ESCOFIER MACHINE, EXCELLENT CONDITION, VERY LITTLE USED. 12-TON MACHINE. POSSIBILITY TO SEE IT OPERATING IN OUR WORKSHOP. Knjdjycq Ebjpfx Aamoc

Condition: excellent (used), Year of construction: 2004, LEISTRITZ RT 400-CCA Thread Rolling Machine Manufacturer: Leistritz Thommen GmbH, Switzerland Model: RT 400-CCA Machine Type:Thread Rolling Machine Year of Manufacture: 2004 Serial Number:1028 Country of Manufacture: Switzerland Technical Specifications Rolling Capacity - Maximum rolling force: 40 tons - Minimum shaft length: 125 mm - Maximum shaft length: 275 mm Rolling Die Dimensions For Ø69.85 mm tooling: - Minimum rolling die diameter: 176–178 mm - Maximum rolling die diameter: 215 mm For Ø80 mm tooling: Ksdpfxjz Rzx Sj Aamenc - Minimum rolling die diameter: 176 mm - Maximum rolling die diameter: 210 mm Electrical Specifications - Power supply: 3 × 400 V - Frequency: 50 Hz - Rated power: 65 kW - Main fuse: 125 A - Control voltage: 24 V DC - Spindle power: 22 / 20.5 kW Hydraulic and Pneumatic System - Hydraulic operating pressure: 270 bar - Compressed air pressure: 6 bar - Hydraulic unit manufacturer: CYMAX AG, Switzerland - Hydraulic unit type: IHS240-DD10-IT75/55+18/270-9.2-A783.1 - Hydraulic oil tank capacity: 240 liters - Hydraulic reservoir capacity (auxiliary): 60 liters - Hydraulic pump flow rates: 75 / 18 / 40 l/min Machine Dimensions and Weight - Approximate dimensions (L × W × H): 3,400 × 2,900 × 2,200 mm - Machine weight: 4,900 kg Equipment - Two-spindle thread rolling arrangement - Hydraulic rolling system - CYMAX hydraulic power unit - Coolant and filtration system - Additional spindle pair for Ø69.85 mm and Ø80 mm tooling (subject to confirmation) Control - PLC control system - Control system retrofit reported in 2019 (subject to confirmation)

Condition: good (used), functionality: fully functional, 1 x Drilling and threading machine WMW Heckert Mikromat Well-maintained machine with complete accessories + coolant pump Technical data: Knodpfx Aozzz E Ieamoc Spindle speeds: 90 - 710 rpm (7 steps) Thread sizes: M6 - M30 Pitches: 1.0 - 3.5 mm The machine can be inspected while powered on.

Condition: good (used), Year of construction: 2000, functionality: fully functional, overall weight: 210 kg, Grinding diameter range: ø20 - ø114.3 mm Grinding angle: 20° - 90° Belt speed: 30 m/sec. / 2.800 rpm Kjdpfxjz H Sdce Aamenc Grinding belt size: 150 x 2.000 mm Featured with: - 7 various grinding rolls - Various grinding belts Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 145 x 120 x 85 cm Machine weight: 210 kg

Condition: used, axle configuration: 3 axles, loading space length: 135,000 mm, loading space width: 24,900 mm, loading space height: 22,200 mm, total width: 26,000 mm, total height: 37,300 mm, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front - Disc brake system = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (by phone at [phone number]). Rohr RSK/34 IV refrigerated semi-trailer with tail lift Refrigeration unit: Carrier Vector 1850, tail lift: Palfinger 2500KL (2,500 kg), additional headlights on the left, right, and rear of the vehicle, air suspension, Duomatic trailer coupling, Daimler axle, Wabco ABS, disc brakes, spring brake accumulators, steered 3rd axle, 1st and 2nd axles can be lifted, cargo space dimensions: length: 13,500 mm, width: 2,490 mm, height: 2,220 mm, tire tread: 1st axle 12-13 mm, 2nd axle 10-16 mm, 3rd axle 9-16 mm, permissible total weight: 34,000 kg, unladen weight: 9,980 kg, payload: 24,020 kg Kjdpfjy Svrtjx Aamenc Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. [phone number]) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale reserved!!! Steering axle = Further Information = Year of manufacture: 2012 Unladen weight: 9,980 kg Payload: 24,020 kg GVW: 34,000 kg Please contact Tobias Ebert for further information.

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) Kodpoz Slqpsfx Aamonc • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, FIXALINE FIXER C pipe cleaning machine, electromechanical cleaning used, from business liquidation Application range: 10mm shaft: DN 50–200 12mm shaft: DN 100–250 Technical data according to the manufacturer: Voltage: 220–240 V / 50–60 Hz / 16 A Speed: 2250 rpm Shaft length: 31 m Shaft diameter: 10 mm or 12 mm Dimensions: 122 × 45 × 90 cm Weight: With 10mm shaft: 74.5 kg With 12mm shaft: 78 kg Without shaft: 56.8 kg Features according to the manufacturer: Left/right rotation switch Speed control Foot switch Emergency stop switch Safety coupling including accessories, as shown in the picture. We recommend an inspection. Sale expressly excludes any warranty for defects. No guarantee or warranty. Information without guarantee. Information, data, and technical specifications provided by the manufacturer. To avoid any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired, AFTER prior appointment. Knjdpfsz Ia S Djx Aamsc Subject to prior sale, changes, errors, and printing errors.

Condition: good (used), functionality: fully functional, current model HG 36 Thread-cutting capacity in ST 60: M10 - M 36 Drill chuck taper: B24 Motor power: 3 kW 6 speeds: 19 – 95 rpm Kodpfjz Ig Tnox Aamsnc

Condition: used, Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the process is extremely gentle on the tooling. The pipes remain almost completely dry and free from major contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging are directly integrated). Thanks to two separate box output stations (rear-side airlocks with sliding doors), the system automatically switches to the second station when the first box is full. The removal of the finished KLT boxes takes place in parallel with the main processing time without stopping the machine. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest setup times in non-cutting separation Material-saving and free from contamination Chip-free Easy to maintain No coolant or lubricant required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimps) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feeding system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths by means of a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Kedpfxszw Ukco Aamsnc Setup operation: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panes Logistics / Output Integrated box unloading station 2 separate box output stations for rear-side removal via protected airlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of construction: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in good optical and mechanical condition.

Condition: used, REISHAUER US is a Thread grinding machine of high precision, engineered for superior accuracy and reliability. Capacities: grinding length 450 mm; clamping 1055 mm; max Ø 250 mm; thread Ø 2–250 mm; spindle bore 45 mm; weight on centres 200 kg; pitch ≤100 mm; angles ±40°; module ≤10; wheels Ø280–350 mm, width 4–40 mm. Specs: wheel speeds 6 steps 1700–2540 rpm; work spindle 27 steps up to 160 rpm; 3×380 V 50 Hz; grinding spindle 4 kW; total 15 kVA; machine ≈4700 kg; footprint 3300×1930×1800 mm. Accessories: coolant, wheel set, flanges, gear set, centers, oil-mist extractor. Achieves tight tolerances; suitable for automotive, aerospace, watchmaking, machine tools, medical. Knodpfxez Dbh Ej Aamsc