Used Pistol for sale (65)

Condition: good (used), Air gun, 2-component gun, multi-function gun, cartridge gun The TS460 XH compressed air gun is designed for 490 ml side-by-side cartridges. It is suitable for applying two-component adhesives and sealants. Iiedpfxeb A Rxuj Amijb -for 2K adhesives and 2K sealants -Propulsion: via compressed air -Weight: 2.3 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Isdpfx Aev Im Ncsmijib Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Other tools for industrial production and maintenance on request.

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Iiodpov Imyujfx Amijb Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Condition: used, 48EPE150D4, Cleco, pistol screwdriver Model: 48EPE150D4 Condition: Used Iijdpovrggcjfx Amijb

Condition: excellent (used), 2-component gun, multi-function gun, cartridge gun, cartridge press, double cartridge dispensing gun, 2K mixing gun Iijdpfx Asu Aigksmijb -Manufacturer: Plunger, Dual Cartridge Dispensing Gun Mixpac Strap Kit -Quantity: 1x cartridge gun available -Price: per piece -Dimensions: 300/210/H85 mm -Weight: 1.2 kg

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Powder coating booth open spray booth Dimensions of the powder booth Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 fan 6000 m³/h Power 3 kW (electric motor) Filter 4 pcs. type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 pcs. 1" "Turbo" Italy Absolute filter 1 pcs. pocket filter type Wagner "Prima Sprint" powder gun Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour Powder combustion furnace Internal dimensions length 3,225 mm Internal width 1,400 mm Internal height 2,000 mm Insulation Rock wool 150 mm [75 kg/m³] Temperature Max. 220°C Fans 1 unit 4,500 m³/h Electric motors 1 pc. 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal output 39 kW Doors on both sides 2 manual, insulated with rock wool 150mm 70Kg/m³ Indirect heating via thermoblock, Isdpfsb Dxnwjx Amioib Heating chamber Tubular heat exchanger Burner* 1 electric heater Steel support for fastening conveyor technology IPE 80 *Choice of gas, oil or hybrid for an extra charge Manual conveyor technology Substructure Steel profiles IPE and SQ Bends 9040C 90 degrees, radius 600 mm 4 pcs. Rail system no. 9040 27m Roller units 9842 GLRHT 16 pcs. Connectors 9041 M 12 pcs. Fixing clamps 9047/100 16 pcs. Manual tongue switch 45 degrees 9401 AIYM 2 pcs. Load carrier L = 1000 mm 8 pcs.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,956 h, functionality: fully functional, machine/vehicle number: 17211, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller model: Siemens Sinumerik 840 D solution Line, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Table width: 400 mm Table height: 30 mm Table length: 500 mm Table load capacity: 500 kg Iiodpfjy Nbt Dsx Amieb Max. workpiece height: 850 mm Max. pallet load: 500 kg Pallet changer: 2 pallets, automatic Change time: approx. 8 s Tool magazine: 60 tools Spindle speed (max.): 18,000 rpm Spindle motor power: 32,400 W MACHINE DETAILS Control system: Siemens Sinumerik 840 D Solution Line Dimensions & Weight Dimensions (L x W x H): approx. 5,150 x 2,800 x 3,025 mm Weight: approx. 12,800 kg Noise emission: 80 dB(A) according to EN ISO 3744 Coolant supply: 80 bar Operating hours Total operating hours: 27,412 h Automatic operation: 11,155 h Spindle hours: 9,956 h EQUIPMENT Documentation/manual Chip conveyor Siemens spindle diagnostics & remote diagnostics (Teamviewer) Energy-efficient system with regenerative feedback Standby mode for energy savings Direct drive NC rotary table 6-channel clamping hydraulics (90 bar) Increased spindle torque for high-performance machining Torque support Central coolant supply system Renishaw OMP60 optical touch probe Tool breakage control Pallet sequence operation Crane infeed/outfeed software Signal light for operating states Work area/machine equipment: shower nozzle, cleaning pistol, vortex nozzle, emission extraction interface Foot switch for air nozzle Documentation: fully digital (PDF)

Condition: new, saw blade diameter 400 mm Iijdpfx Amoy S Dwweieb Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 600 kg, total height: 2,665 mm, total length: 2,440 mm, total width: 1,900 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 4,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 6,651 h, coolant supply: 20 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, A very well-equipped DMG Deckel Maho DMC 635 V with relatively low spindle hours. The machine is connected to power and can be seen in operation by appointment. Additional options & accessories: - Operation mode 4 - Internal cooling – 20 bar - Band filter system – 600L - Chip conveyor - Electronic handwheel - Original accordion cabin roof - Rinsing pistol - Approx. 30 pcs. SK40 tool holders (incl. 3D probe) - All original documentation Iiodpfx Aoy E N Dcsmiob Weight & dimensions: 4,200 kg 2440 (3500 incl. PLC) x 1900 x 2665 mm (LxWxH)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 11,223 h, spindle speed (max.): 20,000 rpm, total height: 800 mm, table width: 650 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It features an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 MonoBlock universal machining centre we have for sale. Contact us for further details. • 5-axis simultaneous machining • Spindle taper: SK 40 • Tool magazine: 60 positions • Internal coolant supply: 40 bar • Spindle Hours: 11,223 h • Machine on hours: 32,851 h • A-axis Range: +/- 120 degree • C-axis Range: 360 degree • Table: Integrated CNC rotary table (diameter 650 mm) within an 800 x 650 mm table surface • Clamping: Hydraulic clamping for the swivel rotary table • Probing: HEIDENHAIN touch probe • Chip Management: Chip conveyor • Coolant: Internal Coolant Supply (ICS / IKZ) 40 bar • Coolant Tank: 600-liter capacity with paper band filter • Cleaning: Wash-down gun (spray pistol) • Extraction: Extraction unit (mist collector) • Table type: Integrated swivel rotary table Additional equipment • Infrared measuring probe • Electronic handwheel • Chip conveyor • Internal coolant supply system with paper band filter • 3D Quickset preparation • Coolant ring nozzle • Air blast • Operating Mode 4 (BA4) Iedpfxsy Ndg Te Amioib • Safety glass window • DMG Netservice client • Optional: approx. 80 tools available Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Iedpfjyvgf Djx Amioib Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Condition: used, Year of construction: 2022, controller manufacturer: Fanuc, controller model: 0i-TF, _____ Description: Year of manuf. : 2022 Control : Fanuc 0i-TF Mainspindle: Technology:Motorspindle Speed (max.):10.000 rpm Power (max.):3,7 kW Barcapacity:20 mm Movement in Z (Longturning mode):205 mm Workpiececlamping:Collet chuck Guide Bush: Running synchronously Subspindle: Technology:Motorspindle Speed (max.):9.000 rpm Power (max.):1,1 kW Workpiececlamping:Collet chuck Ejector:Pneumatic Linearslide: Number of stations lathe tools:6 Taper:12 x 12 mm Number of stations Drilling unit:4 Tooldrive:8.000 U/min Number of stations front drilling quill holder:4 Taper:Ø22 mm Rear attachment: Number of stations:4 Taper:Ø22 mm Tooldrive:8.000 rpm Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump with Filter Raw-material feed:Barlaoder, FMB minimag 20 Iijdpfsy R Iwrjx Amieb Finished-part-removal:Conveyor belt with collection tray Toolholder:Misc. static and driven toolholder Further Equipment:Trafo, Working light, Rinsing pistol

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 2,800 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 3,450 mm, number of axes: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and offers driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOTURN E65 turn-mill centre we have for sale. Contact us for further details regarding this machine. • Work area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle (belt driven): • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing Ø: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Counter spindle: • Speed: 60–5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm • C-axis: • Resolution: 0.001° • Rapid speed: 100 rpm • Turret (VDI30): • Tool stations: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Rotary tools (VDI30): • Speed: 0–5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed thrust X: 5000 N • Feed thrust Z: 7000 N • Acceleration: 0.4 m/s² • Tailstock: • Travel: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank capacity: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optional 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Power supply: • Voltage: 3x400V • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • C-axis main spindle • Driven tools • Hydraulic tailstock • ShopTurn programming • USB + Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional equipment • Bar feeder: EMCO SL1200 • Bar diameter: 8–95 mm • Bar length: 150–1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) Iisdpfx Asy Enr Eomiob • Max. capacity: Ø100 mm • Incl. part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long chips, snarled chips, dry & wet machining • Coolant pistol (Multiflow): • Adjustable jet + solenoid valve • Magnetic holder + spiral hose Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2012, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Siemens 840 D rotary table 800 mm Iijdpfx Amoyxy E Rjijb c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper HSK 63 Tools changer 38 fach/tools Internal cooling system 80 bar total power requirement 43 kVA weight of the machine ca. 10,6 t Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: SIEMENS, overall weight: 1,200 kg, total width: 1,200 mm, total height: 1,900 mm, product length (max.): 2,800 mm, number of axes: 4, This 4-axis WEIRATHER KS1300/4 was manufactured in 2004. It features a maximum milling length of 1300 mm and a milling diameter of 300 mm, making it suitable for various applications such as tool handles and furniture components. The machine operates with a Siemens control system and has a cutter shaft speed of 5300 rpm. If you are looking to get high-quality milling capabilities, consider the WEIRATHER KS1300/4 wood mill we have for sale. Contact us for further details. • Condition: Used • Electrical: 400 V, 50 Hz, 4.0 kW • Number of spindles: 4 • Machining principle: Longitudinal milling • Capabilities: • Max milling length: 1300 mm • Max milling diameter: 300 mm • Max recommended workpiece size: 1300 x 150 mm • Cutter shaft speed: 5300 rpm • Operation/features: Low-vibration, smooth running; high dimensional accuracy and clean surface finish • Lubrication: Automatic central lubrication (reduced maintenance) • Production type: Suitable for series production • Workpiece type: Long and 3D-contoured parts • Material suitability: Hardwood, softwood, multiplex, MDF, selected plastics (with suitable cutters) • Typical applications: • Tool handles, hammer/axe/garden tool handles, walking stick handles • Gun stocks, pistol grips, bow risers • Furniture parts: armrests, back rails, handles, decorative moldings, wooden feet • Balusters, posts, handrail and volute segments • Paddle and oar handles and shafts • Consoles, corbels, decorative supports, sculptural elements • Foundry patterns, gauges, templates, fixture components • Knife and tool handles, pestles, kitchen utensil handles • Certification/conformity: CE marked; EC declaration of conformity available • Test run: Possible under power by appointment • Included: Machine as shown Additional equipment • Optional: Additional milling cutters available • Optional: Additional templates (only if shown or explicitly mentioned) Isdpfx Aey D I Rfemisib

Condition: used, Year of construction: 2018, functionality: fully functional, arm reach: 2,500 mm, Equipment: documentation/manual, For sale: A high-quality HEXAGON Absolute Arm 8525 (7-axis) with RS5 laser scanner, purchased new at the end of 2018. The system has been carefully maintained, used exclusively in an industrial environment, and serviced regularly. The measuring arm is ideally suited for: Iisdpfx Aoy Iagasmiob # Quality control # Incoming goods inspection # In-process measurements # Reverse engineering # 3D scanning and surface capture A valid calibration / ISO-10360-12 certificate is available and can be supplied upon request. Technical data (measuring arm) # Model: HEXAGON Absolute Arm 8525 # Axes: 7 # Measuring volume: 2.5 m # Encoders: Absolute encoders & SMART sensors # Zero-G counterbalance with SmartLock & HomeDock # Wrist display with haptic feedback # SpinGrip & SpinKnob # Base plate with mounting ring RS5 Laser Scanner (installed) # Premium RS5 laser scanner for point and surface scans # Operation in standard or compact mode # Removable pistol grip (sizes: small / medium / large) # ODU-USB & ODU twin cable (USB/LAN) # Certified scan report for arm + scanner Comprehensive accessories (see photos) ✔ Control Pack 3 (wireless, installed) ✔ TESA / TKJ CFRP probes (including 3 mm / 6 mm ruby, 15 mm steel) ✔ Calibration sphere & length gauge ✔ Magnetic mounting plate ✔ Block spring set ✔ Hook wrench ✔ Transport & accessory case (original HEXAGON) ✔ Power supply, dust cover ✔ PolyWorks USB dongle (for Inspector, license status on request) Software # PolyWorks Inspector™ Premium (original purchase) ➡ License details / transferability to be clarified upon request Your advantage # Significantly more affordable than new # Immediately available # Proven industrial quality by HEXAGON # Ideal for QC, contract measurement, prototype construction & manufacturing Inspection & Shipping # Inspection and testing by arrangement possible # Shipping carefully packaged in the original case # Collection preferred

Condition: new, Technical specification: - Chamber volume: 990 litres - Power supply: 230V ~ / 50Hz - Nominal working pressure: up to 10 bar - Cleaning capacity: up to 15 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve vacuum BRAGO - Pistol: Vacuum CTR - Dimensions of the working area: 1 600 x 870 x 730 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 250 kg - Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) Iedpfxoft Sq Hj Amioib - Coating protection: Powder coating - Working temperature: 10 to + 50 degrees Celsius - Inspection valve: Yes - The picture shows an example for the configuration of the SCI-800-10 SA The offer includes: - Land Reko SCI-800-10 SA Chamber cleaner semi-automatic - Boron carbide nozzles 8 pcs. Large at choice between 4 mm and 10 mm - Pneumatic connections - Working pressure control system for sprinkler sections - Roller conveyor with manual drive 1,5 lm x 2 - Automatic sprinkler and grinding valve x 8 - Workpiece blowing system after processing - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs - Free delivery - Device also available in leasing or financing - Unit On order. Delivery time 8 weeks from order.

Condition: as good as new (ex-display), Year of construction: 2026, Pressure washer PTC Easypower XL E similar but not Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Feed rate: 13-38 l/min. - Motor: IE3 electric 63A, 3Ph-400V-50Hz 50PS/37kW, 1450 1-min or IE3 electric 63A, 3Ph-440V-60Hz 50PS/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Tare weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers Iisdpfxofdzxis Amiob - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easy manoeuvrability - Industrial low voltage supply (24V) and control unit with star-delta starter and 10 m. Power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operating hours counter - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power XL E 38/400 | 38l/min 400bar | 30kW | 560kg Easy Power XL E 30/500 | 30l/min 500 bar | 30kW | 560kg Easy Power XL E 20/800 | 20l/min. 800bar | 30kW | 580kg Easy Power XL E 15/1000 | 15l/min 1000bar | 30kW | 580kg Easy Power XXL E 19/1000 | 19l/min 1000bar | 37kW | 580kg Easy Power XXL E 15/1250 | 15l/min 1250bar | 37kW | 580kg Easy Power XXL E 13/1500 | 13l/min 1500bar | 37kW | 580kg

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mm Turning length : 800 mm Mainspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:76 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Ejector:Pneumatic Movement in Z:800 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:260/100/800 mm Eilgang in X/Y/Z:30/12/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:210/800 mm Iiodpfx Amoy A U Izsieb Eilgang in X/Z:30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Rawmaterialfeed I:Robotinterface prepared Rawmaterialfeed II:Barloaderinterface prepared Finishedpartremoval:Workpiece unloading device with conveyor belt Oilmistseparation:Interface prepared Toolholder:Misc. static and driven toolholder Further Accessory:Automatic Door, Rinsing pistol

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 04/2027, Fifth wheel height: 1,150 mm. Hydraulic system: 110 l/min, 225 bar, connections on front wall: 1'' male screw pressure line, 1'' female screw return line. BPW On Road Eco Air axles, 1st axle liftable, EBS 2S/2M KNORR, JOST steel landing legs, fully enclosed side underrun protection painted RAL 9005 black. Two LED work lights behind the third axle and in front of the support legs, one LED work light inside. Steel wheels with black wheel hubs, 6 kg fire extinguisher, 3-metre ladder, radio remote control for floor functions, bracket for shovel and broom, two toolboxes mounted on the overhang, 15-metre air hose with hydraulic reel and pistol, self-supporting chassis 4,400 mm, aluminium body 3/2 mm. Catwalk at front wall with two ladders, door in front wall left with ladder, 10 mm floor type, aluminium movable side wall with tarpaulin (3,800 g) and rail sweeper, rear doors each with two integrated 18 mm locking rods, reinforced door sealing, rear upper cross member unlockable on right side by pin, pneumatic door unlocking, roof roll tarpaulin, black (650 g), with side reinforcement (200 g over 600 mm), twelve pairs of lashing rings, wear plates on rear side walls (3 x 1.5 m), black integrated lashing straps in side wall with stainless steel ratchets, left side protection tarpaulin RAL7038. Iodpfoyw Dxxex Amioib

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, seat heater, soot filter, traction control, trailer coupling, - Heated mirrors - Leaf suspension - Brake booster - Differential lock - High beam headlights - Low noise / Quiet operation - Speed limiter - Air conditioning - Air-suspended seats - Particulate filter - PTO (Power Take-Off) - Radio/CD - Reversing camera - Sliding roof - Seat heating - Sun visor flap X TO GO “EUROMIX TO GO” OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA, GERMANY. FOR ALL CUSTOMERS EXPERIENCING AN URGENT REQUIREMENT (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT). Your advantages: Immediately operational complete vehicles (concrete mixers/tippers) Immediate availability directly from the manufacturer Bodywork, assembly, commercial vehicle Best price-performance ratio Financing options Trade-in of your used vehicles Renault K 480 8X4 Euro6e EuromixMTP EM 10 L Truck Mixer ENGINE DE 13, displacement 12.8 liters, max. output: 360 kW at 1,404-1,700 rpm Optidriver gearbox AT 2612 (14.94 - 1) Wheelbase 4,350 mm Rear axle ratio: 3.33 Tyre size 315/80 R22.5 Two electrically adjustable and heated exterior mirrors. Tinted rear window Pre-installation for CB radio Rubber floor mats LUXURY DRIVER'S SEAT: Adjustable vertical suspension Seat cushion tilt, longitudinal and height adjustment Removable cover Adjustable headrest Quick lowering of the seat with memory height adjustment Adjustable side support of backrest Adjustable side support of seat cushion Adjustable lumbar support Seat cushion extension Seat heating driver’s seat Seat ventilation driver’s seat Two armrests on driver’s seat Viscope external sun visor. Compressed air pistol in driver's cab Mixer equipment: EUROMIXMTP - Mixer body EM 10 L - Lightweight design Model: EM 10 L Nominal volume 10 m³ of ready-mix concrete Mixing drum in lightweight design Mixing drum manufactured from HARDOX S450 lightweight material Mixing spirals manufactured from HARDOX S500 lightweight material Gearbox: ZF-P5300 Hydraulic pump: Bosch Rexroth Hydraulic motor: Bosch Rexroth Integrated oil cooling system Mixing control: mechanical and with electric start/stop Compressed air water system Water connection at platform with hose Water fill line, single-sided with C-coupling Mixing drum with service hatch Ladder with platform Iedpfjy Am Hcox Amisib Rubber sleeve on charging hopper Swiveling, single-arm discharge chute made of steel Wear plates in charging hopper, discharge basin, and swing chute Drum locking device for securing during maintenance Polyurethane primer Weight approx. 3,650 kg, tolerances +/- 5% With emergency stop function according to EU safety standards Steel mudguards over rear axles 2x extension chutes, steel or plastic Water system Water tank: 650l, 500l, 350l (compressed air) Steel water tank Shut-off valve fitted below water tank in feed line Water connection “C” coupling Operation & electrics Mixer controls – mechanical at rear Start-stop system (with EDC) Geometric volume 17,361 L Water tank volume 11,121 L Tank tilt angle 11.3 degrees Length 7,075 mm Width 2,300 mm Height 2,748 mm General information...

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Iijdjflq Spspfx Amiob Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical power requirement: 15 kW Includes: - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance - Ultrasonic submersible transducers with dual-side sonication - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Isdpfjxuzyfjx Amijib Demonstration unit from the Glogar Technology Center, available immediately

Condition: ready for operation (used), Year of construction: 2014, operating hours: 6,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis POSmill C 1050 was manufactured in 2014. It features a travel of 1050 mm in the X-axis, 530 mm in the Y-axis, and 630 mm in the Z-axis. The machine is equipped with a Heidenhain iTNC 530 control system and a tool changer that holds 30 tools. If you are looking to get high-quality machining capabilities, consider the POSmill C 1050 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 560 mm • Linear measuring system: Heidenhain X/Y/Z • Through-spindle coolant and air • Internal coolant supply: 20 bar • Coolant pump controlled via M-functions • Connectivity: network and USB • Enclosure: polycarbonate safety enclosure; side windows left and right with hinges • Status signal light Iodpfx Amoyrq Hkoioib • Hours: 610 h Additional equipment • Chip conveyor, hinged-belt type (external) • Chip flushing system (M-function controlled) • Coolant belt filter system • Oil/coolant separator, electromechanical • Electrical cabinet cooler, air-to-air • Mobile electronic handwheel • Air pistol • Water pistol Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC-SRT 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT - Heidenhain DNC - DXF import - Kinematic Opt iTNC - Automatic cabin door - Additional magazine: ZM43 - Linear guides: Dynamic version - Rotary table axis: A-axis (not centered) - Manual cabin roof - Laminated safety glass window - Pallet storage - External MQL (minimum quantity lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Preparation for additional touch probe - Event Messenger - Tool identification HSK - Machine license TCS-Soflex - Electronic thermal compensation - Electronic hand control module - Oil mist extraction (prepared & with after-filter) - Flange for oil mist extraction - Sealing air for measuring units - Chip flushing pistol - Machine bed flushing - Internal & external air blast - Signal light - Coolant filter type: Paper band filter for coolant system - Scraper belt conveyor Iodpfx Ameyzyttsieib - Test protocol: C 40 iTNC 530 PW160