Used Peddiworker 502 for sale (807)

Condition: good (used), pressure 50.0 t punching cross-cut in cmm 27.0 in 14.0 mm ST round bar steel 32 + 17 mm square edge steel 30 + 18 mm Dsdpfxo Aa A H Uj Ab Askw L-beam 100 x 10 mm throat 200 mm shear: flat material 190 x 10 mm blade length 200 mm stroke - stepless adjustable 10 - 28 mm stroke 14 - 28 H/min total power requirement 4.0 kW weight 900 kg range L-W-H 950 x 650 x 1730 mm from a maintenance workshop in good condition (!!) Equipment: - Compact electro-hydraulic combined structural steel shear * with notching station * with punching station * flat bar shear * angle steel shear * round and square bar shear - Support table at the notching station - Support table at the punching station - Stripper at the punching station - 1x mobile foot switch - Assortment of various punches and dies - Original operating manual

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: N20190155, Wet cutting machine Metkon Servocut 502 - AX for sale due to business closure, little use, includes diamond cutting blade. Dkodpfxozvlqkj Ab Aew

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling Dodpfxeyyz Ebs Ab Ajkw - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Dkjdpjyyzxhjfx Ab Aow Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: dd2d22d, ELECTRONIC CONTROL SYSTEM FOR X-RAY CUTTING LINE Wood type: Pine, Spruce Scanner functionality Acquisition of measurement signals from the multi-sensor scanner. Processing (D) of the 3D map from the laser triangulation signal. Processing (S) of the fiber deviation map from the laser scatter signal. Processing (R) of the roughness map from the laser triangulation signal. Processing (C) of the normalized color map from the high-resolution RGB signal. Integration of 3D data, fiber deviation, roughness profile, and color map information into a coherent multidimensional image. Dkedpsxvxrnjfx Ab Asw

Condition: good (used), 1 used hydraulic punching machine Manufacturer: Peddinghaus Type: Hydraulic 502 Year of manufacture: 1999 Technical data: Punching force: 500 kN (50 t) Stroke: 32 mm Adjustable stroke: 10–32 mm Stroke rate at 10 mm stroke: 35 strokes/min Overhang depth: 510 mm Working height to die: 1,070 mm Installation height: 350 mm Punching table width: 255 mm Punching performance with standard tool: Ø 31 mm in 12 mm material thickness Rated power: 4 kW Electrical connection: 400 V / 50 Hz Oil capacity: 45 liters Machine weight: approx. 1,320 kg Machine dimensions (L × W × H): approx. 1,080 × 650 × 1,680 mm Possible punching performances with special tools Ø 58 mm in 7 mm material thickness Ø 65 mm in 6 mm material thickness Ø 90 mm in 4 mm material thickness Ø 130 mm in 3 mm material thickness Equipment / Features Dedpfs Ah Dwlsx Ab Aokw Hydraulic drive Integrated hydraulic unit Quick-change device for punches up to Ø 31 mm Height-adjustable and movable stripper Two-stage foot switch Electrical control

Condition: excellent (used), Year of construction: 2021, Palamides Gamma 502 Year 2021 Banding delivery system for folding machines, saddle stitchers, etc. Height-adjustable infeed Suitable for two product streams (parallel) Press station with a pair of press rollers Shingled product transport for high-speed production runs Banding system for two bands Equipped for 50 mm wide banding material Equipped for product thicknesses of 0–6 mm Foldable delivery table Located in Germany Dkjdpfezqtl Eox Ab Aew Used in conjunction with a Horizon machine; can also be adapted for other folders Available immediately

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Dkedjz Hwhyepfx Ab Ajw Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: used, Year of construction: 1999, hydraulic ja Dsdpfxex U A Tvj Ab Aekw 100 t weight of the machine ca. 2,9 t

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard Dkedezi S R Ropfx Ab Asw • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2022, A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Dkjdeycwucjpfx Ab Ajw

Condition: like new (used), Year of construction: 2008, machine/vehicle number: 422250708034, Punching force: 500 kN Stroke: 32 mm Adjustable stroke: 10 - 32 mm Stroke rate: 35 /min Standard punching tool: 31 Ø in 12 mm Dedpfx Aez Dit Neb Ajkw with punching table: 24 Ø in 16 mm with special punching tool: 58 Ø in 7, 65 Ø in 6, 90 Ø in 4 and 130 Ø in 3 mm Hydraulic drive: 380 V, 4 kW Weight: 1530 kg Space requirement: 1200 x 1100 x 1680 mm The machine has only 303 operating hours!

Condition: used, Year of construction: 2012, Air cushion machine Fromm Airpad machine Manufacturer: Brüninghaus Type: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or Polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min Dkjdpfowulylsx Ab Aew (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min. (depending on the film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions: (L x W x H) 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / Special equipment: • Stored programs for different cushion sizes • Program change is done by pressing a button • From 4 cm to 16 cm in length, it can be produced individually with a defined fill level • 10 programs are available for storing multiple parameters 41126ä

Condition: used, Year of construction: 2007, Delivery Dkodpfxey Iv Nqs Ab Aow Palamides Delta 502 Year: 2007 - Vertical stacker - bundler - Banding device(s): 2 Voltage 220 volts or 380 volts (transformer)

Condition: used, Year of construction: 1992, Max. punching and shearing capacity: 800 kN Punches e.g. 25 mm holes in 20 mm steel Dkodpfx Abswak Hns Ajw Shears on the flat steel shear on 350 mm up to 15 mm steel Further technical data on request With a range of punches and dies as desired

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Max. round diameter: 1000 mm Djdpfx Aewb Efzob Ajkw Motor drive via footswitch Good condition

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: A99965, overall weight: 93 kg, input voltage: 230 V, input current: 3 A, input frequency: 50 Hz, This semi-automatic pallet strapping machine makes strapping pallets with PP band much easier. The strapping machine has a fixed lance that is moved under the pallet. The lance guides the strapping band, and you can pick it up again on the other side of the pallet. Then, you manually place the strapping band over the pallet. You insert the end of the strapping band into the sealing section of the strapping machine. The strapping band is then effortlessly tightened, sealed, and cut. Dedpfx Abo Adtuwj Aekw

Year of construction: 2014, condition: good (used), High-quality Airpad machine from a renowned manufacturer. Suitable for producing custom-designed, air-filled protective and cushioning elements made of PA and PE film, as well as paper-based bubble wrap. Dkjdpfskkcqqjx Ab Ajw Typically, four air cushions are produced per working cycle. Various formats can be produced. For this purpose, 10 programs are available to store multiple parameters. By calling up the corresponding program on the display, air cushions can be produced with lengths ranging from 4 cm to 16 cm and individually defined fill levels. The resulting air cushion strips are then wound into rolls by a motorized device. When the roll is full, the machine automatically shuts down. The finished roll can then be manually removed and used as packaging material. The machine can be moved by pushing it on its rollers and secured in place using brakes. The machine can be demonstrated while powered on.

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Dedpfx Abjyy S Uae Aokw Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately -

Condition: used, The Horizon AFC-502 folding machine, serial number 23027, is a versatile solution for professional folding applications. Currently dismantled and located in Germany, it is designed to handle a wide range of formats with precision and efficiency. This model offers 2 parallel folds and 1 cross fold, supported by a suction head with rotary feeder for smooth and reliable sheet handling. It accommodates sheet widths up to 500 mm (minimum 105 mm) and lengths up to 648 mm (minimum 174 mm). Cross folding is possible from 182 mm to 500 mm, while perforation can be performed on sheets ranging from 105 mm to 500 mm in width. Performance highlights: Folding capacity: 2 parallel folds + 1 cross fold Sheet width: 105 ??? 500 mm Sheet length: 174 ??? 648 mm Cross folding: 182 ??? 500 mm Perforation width: 105 ??? 500 mm Speed: up to 180 m/min Compact and efficient, the Horizon AFC-502 is well-suited for printshops requiring reliable folding performance across a variety of formats. Format: 500 mm Equipment: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Djdpfx Abow U Dtve Askw Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder

Condition: new, Year of construction: 2026, functionality: fully functional, grinding wheel diameter: 200 mm, grinding spindle motor power: 4,000 W, Saw blade grinding machine "Schmidt Tempo ECT 502 Retro" suitable for: - HSS and carbide saw blades up to 520 mm in diameter and 8 mm thick - completely overhauled mechanics and additional drive for automatic chip angle adjustment. - modern, mandatory safety devices - new control system, new software - operable via touchscreen display - 4 kW grinding wheel drive motor in combination with a frequency inverter for variable cutting speeds of 24-60 m/sec. - definable grinding speed, 3 profiles - automatic chip angle adjustment / swivel angle - Autopos 4 - latest generation - adjustable via machine menu - freely definable special teeth, graphical control - remote maintenance and updates possible - extensive diagnostics and machine data menus - ...and many other features and functions Dkjdpfx Abez Dhbfs Aow - optionally with coolant system and necessary accessories

Year of construction: 2022, condition: like new (used), Celeros HL250-200-315 Centrifugal pump 2022, Unused, rev 1480 min, flow rate 495 m3h, with manual Dodpfx Ae Ad Rh Isb Ajkw

Condition: good (used), functionality: fully functional, Year of construction: 2000, operating hours: 29,075 h, stroke length: 200 mm, overall weight: 4,700 kg, power: 9 kW (12.24 HP), input voltage: 400 V, input current: 20 A, input frequency: 55 Hz, pressing force: 50 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, We are selling a 2-meter sheet metal bending machine. The machine was used exclusively for thin sheet metal processing in our production facility. Manufacturer: AMADA Model: HFE 50-20s Year of manufacture: 04/03/2000 Condition: good (used) Operating hours: 29,075.7 hours 500 KN Max. stroke: 200 Weight: 4700 Noise level: less than 75 dB Voltage: 400 V / 50 Hz Rated current: 19.9 A Dkodpfx Abez R Rl Ao Asw UVV inspection carried out according to schedule / maintenance always performed by Amada according to schedule! The machine can be inspected under power in DE-84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty! The buyer must disassemble and collect the machine.

Condition: used, Year of construction: 1995, Load capacity: 1600kg, lift height: 3300mm, engine: Ford, drive: LPG. UVV inspection sticker 2026 available. The hydraulic system was serviced in 2026. Documentation available. Inspection by appointment possible. Dsdpfxszyq R Rs Ab Aekw

Condition: used, Transpak TP-502 semi-automatic strapping machine for the quick and secure strapping of cartons, parcels and general cargo using plastic strapping. The machine automatically seals and tensions the strapping and is suitable for efficient use in dispatch departments, warehouses and packing areas; strapping included. Dodpfx Ajzrx Rvob Aokw Technical data: - Bandwidth: 6–13 mm - Table size: 850 × 560 mm - Working height: approx. 780 mm - Power supply: 230 V - Delivery: €69.00