Used Paving Stone Shape for sale (2,752)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, table bore: 80 mm, table diameter: 145 mm, gear diameter: 125 mm, controller manufacturer: Siemens, controller model: SINUMERIK 840 D, TECHNICAL DETAILS Working Area Maximum wheel diameter: 125 mm Maximum module: 3 Maximum gear width (spur gears): 24 mm Centre distance: -25 to +180 mm Maximum swivel angle: 12° Maximum helix angle: 45° Table Table diameter: 145 mm Table bore: 80 mm Infinitely variable table speeds: 0.03 – 50 rpm Shaper Spindle Strokes (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaper spindle diameter: 85 mm Cutter holder interface: HSK 80 B Tool and Workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control system: SINUMERIK 840 D MACHINE DETAILS Electrical Data Drive power: 7.5 kW Total connected load: 30 kVA Weight and Dimensions Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Iedpfxjwyn Ame Ag Ueht Swiveling counter holder with 4 positions Automatic workpiece changer Linear workpiece conveyor

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 3649, Country of manufacture: Switzerland Voltage: 380 V / 50 Hz / 3 Phases Net weight: approx. 445 kg Dimensions: 730 x 780 x 1380 mm Customs tariff number: 8459.6130 TECHNICAL SPECIFICATIONS Ihsdpfx Agjw Uc Tbe Uot Maximum distance between stops: 80 mm Maximum cutting length: 50 mm Maximum cutting diameter (with 24 mm dia. cutter): 36 mm Maximum module: 1 Number of teeth cut – with 1:4 ratio: 6-100 with 1:10 ratio: 6-200 Total rapid approach and plunge travel: 8 mm Maximum axial movement travel of the cutter: 10 mm Maximum plunge cutting travel: 2.5 mm Maximum movement of counter-spindle quill: 25 mm Maximum distance between workpiece axis and cutter axis: 30 mm Maximum cutter diameter: 32 mm Quill body diameter: 35 mm Continuously adjustable slide feed rate: 0-60 mm/min Constant rapid return feed rate of the slide: 3 m/min 8 spindle speeds: 660–5300 rpm Horizontal tilt of the cutter head: approx. 4° Cutter motor power (2 speeds): 0.37/0.59 kW Hydraulic pump motor power: 0.24 kW Coolant pump motor power: 0.07 kW Hydraulic oil tank capacity: 13 l Cutting oil tank capacity: 10 l Quill oil tank capacity: 10 l All technical data provided without guarantee and subject to errors or omissions.

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable. Ihedpfx Agjx R U Hms Ust

Condition: good (used), Feed conveyor for four-sided planer with hydraulic drive TECHNICAL SPECIFICATIONS Working width: 300 mm Working height: 200 mm 6 infeed chains for material handling Iedpjx Svn Iofx Ag Ujht Hydraulic feed drive Feed speed: 60 m/min

Year of construction: 2025, operating hours: 7 h, condition: new, functionality: fully functional, Our semi-mobile electric stone conveyor for sorting rollable materials such as stones. To be placed directly behind a drum screen for the separation of stones from green waste, compost, or soil. Easily powered via a 16-amp electrical connection. The conveyor angle and belt speed are adjustable. Demonstration unit from 2025 with Iodpfxjrhkpzj Ag Ueht

Condition: good (used), Punching machine Sahinler HPM-65 Iodpfsx A Ttgjx Ag Usht Model HPM 65 Capacity: 65 Tons Punching capacity: Ø 26 in 20 mm Cylinder stroke: 55 mm Throat depth: 625 mm Working height: 950 mm Power: 5.5 kW Weight: 2,440 kg Including various punches automatic feed / coordinate table very easy to operate for both single hole and multiple holes (program) stroke x 1900 mm stroke y 400 mm Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we advise you to verify all relevant details. Financial information VAT/margin: VAT: The indicated price is exclusive of VAT (VAT is deductible for business customers).

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale is a stone deck oven / deck oven from Friedrich in Solingen. The oven is the 800/600 model. It was purchased at the end of 2023 and has been in use for less than 1.5 years. The condition is very good. Viewing by appointment. Further information about the oven can be found on the manufacturer's website. VAT can be shown separately! Ihsdpfx Agjw S T Htj Uot

Condition: used, Year of construction: 1954, total height: 2,000 mm, total width: 1,600 mm, total length: 2,400 mm, Empty weight: 1.000 kg Price: On request Chuck: 700mm  Workpiece maximum height: 550mm  X axis displacement: 450mm - Year: 1954 - Documentation available: No - CE certificate present: No - Transport dimensions: 2400mm x 1600mm x 2000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ihsdpfx Agjxbq U Se Ust Lukas van Rossum

Year of construction: 1995, condition: used, functionality: fully functional, Compact bridge saw, perfect for cutting stone, marble, and granite. The machine is fully functional. Features: Hydraulic table, very convenient to use Electric head movement Ijdpfxsx A Dc Ss Ag Uoht Blade: Ø 600 mm Z-axis stroke: 500 mm

Condition: good (used), ø max. Gear 250 with 3" cutter module 5,5 hobbing length 70 cutter module 5,5 outside ø max. Acknowledged 300 mm ø spindle 85 mm ø hole table 39 mm ø table External centering Ø139,75 power tool motor (b) 4 Cv high 1.800 mm long 1.450 mm weight 2.450 Kg Isdegq Dgdepfx Ag Usht width 1.000 mm

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Iodpjwzmbqofx Ag Uoht Installed power KW 60

Year of construction: 2020, condition: new, T-Shape 3-in-1 Multi-System // Built in 2020 Ihodpfx Ajrxri Sjg Ust T-Shape combines three powerful technologies that work simultaneously to promote collagen production and significantly reduce localized fat volume and skin elasticity. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness. - Skin tightening - Cellulite reduction - Fat deposit reduction - Circumference reduction - Post-liposuction treatment - Facelift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar, and hexapolar radiofrequency signal. Heat is generated by the contact of RF (radiofrequency) energy with tissue impedance. When properly heated, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, and the skin appears firmer, more compact, and younger. Vacuum Suction T-Shape features vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and favors vasodilation. LLLT Laser Because the LLLT laser irradiates adipose tissue, it contributes to the formation of temporary micropores in fat cells and accelerates the fragmentation of triglycerides into glycerol and fatty acids, allowing them to escape from the cell, which in turn has a smaller volume. The released lipids are excreted through normal metabolic processes. LLLT effectively reduces body circumference through targeted application to the treated areas and has also been shown to reduce edema. Technical Specifications Supply voltage: 220/230 Vac 50/60 Hz Power consumption: 1300 W Weight: 45 kg Dimensions: 348 x 513 x 1008 mm Low-power laser wavelength: 760 nm Laser class: 3 R Laser density: 8 MW/cm² Bipolar radio frequency signal frequency: 1500 kHz (1.5 MHz) Maximum RF power: Less than 25 W Stimulated suction pressure: Less than 80 kPa (0.8 bar) Item condition: Used, good condition Find more items - new and used - in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2007, A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible. Ihjdpfx Agex Ih Daj Uot

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis Ihodpoxyadtsfx Ag Ust angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: used, Year of construction: 1989, - workpiece thickness max. (mm): 55 - workpiece width min. (mm): 80 - Profile depth max. (mm): 80 - inner radius min. (mm): 10 - Edge material thickness max. (mm): 3 - depending on radius and edge material - milling motor: 0,5 kW, 27.000 rpm. Ijdpfxek E Hrbs Ag Ueht - Electricity: 220 V - 1 Ph. - 50 Hz - Connection value (kW): 0,5 - Compressed air connection (bar): 6 - dimensions L x W x H (mm): 850 x 650 x 1430 - working table height (mm): 1000 - buffing unit: for processing thick PVC edges - Weight (kg): approx. 120

Condition: new, functionality: fully functional, total length: 2,200 mm, total width: 2,200 mm, total height: 2,100 mm, overall weight: 680 kg, EURO Destoner and Washing Machine TWM 2000 D-DR With automatic stone discharge and counterflow washing Long feed chute and stone chute Two double-bearing, driven support shafts Heavy-duty drive chains Four discharge paddles Large discharge ring, water consumption approx. 1.0 – 4.8 m³/h depending on contamination and washing capacity Drive motor 2.2 kW/400 Volt Drum length approx. 1100 mm Drum diameter approx. 1800 mm Machine length approx. 2200 mm Machine width approx. 2200 mm Ihjdjx Swptjpfx Ag Uot Machine height approx. 2100 mm Weight approx. 680 kg Capacity max. 20 t/h.

Condition: new, Year of construction: 2021, functionality: fully functional, total height: 5,400 mm, total length: 8,300 mm, total width: 2,300 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, Machine for squaring blocks and cutting slabs and thick slabs, featuring a heavy-duty, arc-welded steel structure, which is heat treated to ensure the required stiffness of the system and a top cutting precision. Extremely user-friendly, the machine is provided with a control console with touch-screen housed in the electric cabinet and a mobile button panel to actuate the main working axes. Ihedstwww Hspfx Ag Uot The machine needs to be adapted for different voltages and frequency. The machine is not available for North America.

Condition: used, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 350 mm, table width: 1,770 mm, table length: 3,550 mm, overall weight: 9,000 kg, total length: 5,890 mm, total width: 2,990 mm, total height: 3,125 mm, tool diameter: 140 mm, tool length: 200 mm, tool weight: 15,000 g, tool magazine motor power: 12,000 W, SPECIAL PRICE Ihedpfexdiupox Ag Uet Advanced Cnc Router for Drilling, Contouring and Shaping slabs in Marble, Granite, Quartz, Ceramic, Lapitec to create kitchen and vanity tops

Condition: used, Breton Sample Line is the line for production of display samples in a wide range of materials and sizes The samples that can be produced on the Samples Line are suitable for marketing and exhibition uses. The line can process several materials: quartz, granite, marble, and porcelain stoneware. Ihsdpfx Asxdi Rwog Ujt

Condition: excellent (used), functionality: fully functional, Sandblasting machine for stone slabs, width 200 cm (including dust extraction system) Iedjxxlwpopfx Ag Usht

Condition: good (used), functionality: fully functional, 2 Waxing Machines for stone slabs Iedjxxlm Depfx Ag Uoht

Condition: new, functionality: fully functional, overall weight: 52,000 kg, total length: 10,400 mm, total width: 6,800 mm, workpiece length (max.): 3,700 mm, workpiece height (max.): 2,200 mm, Breton Paragon is the multi diamond wire machine for sawing marble or granite blocks, cutting slabs in slight thickness Iedpsxdh Rcjfx Ag Uoht Multi diamond wire machine to cut 20 or 30 mm thick slabs. The structural robustness combined with the characteristic triangle system makes it possible to saw marble and granite blocks to make slabs of various thicknesses. Price from €uro 500.000

Condition: new, overall weight: 54,000 kg, total height: 7,900 mm, total length: 12,500 mm, total width: 8,500 mm, workpiece length (max.): 3,700 mm, workpiece height (max.): 2,200 mm, Breton Paragon Flex is the multi diamond wire machine for sawing marble or granite blocks, cutting slabs in slight thickness Multi diamond wire machine to cut 12, 20 or 30 mm thick slabs. The structural robustness combined with the characteristic triangle system makes it possible to saw marble and granite blocks to make slabs of various thicknesses, even thin ones. Iodjxbg Rcopfx Ag Usht Confidential negotiation

Condition: new, Year of construction: 2026, For sale: versatile Eckert Opal Waterjet cutting system, ideal for processing stone (natural stone, marble, granite), but also suitable for a variety of other materials. Waterjet cutting is performed without thermal impact, enabling precise and clean cutting edges. Perfect for complex contours, inlays, cutouts, or demanding shapes in stone. 🛠 Technical Specifications & Equipment (Manufacturer Data) Working width: 1,000 – 6,000 mm Working length: 1,000 – 12,000 mm Cuttable material thickness (waterjet 2D): 0.5 – 250 mm Ihedpfxjx A Tr Ns Ag Uot Cuttable material thickness (waterjet 3D, optional): 0.5 – 150 mm Positioning speed: up to 25,000 mm/min Positioning accuracy: ± 0.025 mm Design: Gantry construction with closed steel profiles for maximum stability and durability. The cutting tank is statically decoupled and corrosion-protected. Control system: Modern CNC control with touch display (Corning® Gorilla® Glass) – intuitive to operate for efficient workflow. Cutting process: Pure water or abrasive waterjet cutting; optional 5-axis cutting head available for 3D/bevel cutting. Optional additional equipment (if available / to be specified): [e.g. “Pro-X 3D Cutting Head”, “Abrasive Cutting”, “Multiple Cutting Heads (e.g. 2-Head / 4-Head)”, “CAD/CAM Software”, “Water Softening System”, “Scraper Chain Conveyor”, “Wastewater / Filtration Unit”, etc.] 🎯 Ideal for: Stone and natural stone processing businesses, marble or natural stone design workshops. Companies requiring precise, heat-free cuts for contours, inlays, cutouts, or shaped stones. Operations that value clean cutting quality, minimal reworking, and high flexibility in terms of materials. Projects with complex shapes, bevel cuts, or 3D processing – especially with the optional 3D cutting head.

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Ihodpfx Aeurulpjg Ust Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote