Used Part Washers for sale (14,921)

Condition: good (used), Year of construction: 2001, Loader with 3 units for: 1) left -> end cut with 1 saw blade Pgodpfxjvxqh Ds Abkon 2) right –> milling or drilling 3) left and right –> sanding piece heads with continuous abrasive belt and profiled pads Sanding machine with - No. 2 upper horizontal sanding belts - No. 2 lower horizontal sanding belts - No. 2 right vertical sanding belts - No. 2 left vertical sanding belts - No. 2 orbital sanders - No. 2 Camam robots mod. NTTR for handling pieces - No. 2 Camam brushing heads mod. SAW 91 - Return connection belts to the operator - With cabin - CE norms Technical characteristics: • maximum length of pieces to be sanded 1,200 mm • Minimum length 380 mm (350 mm without orbital sanding) • Abrasive belt dimensions: 3,700 x 90 mm • Maximum curvature of pieces 120 mm

Condition: used, The painting line consists of the following elements: Pedpfx Absyy Rivskjgn 1) MTL.120 monorail, 600 kg load capacity, equipped with hooks and rotation drive 2) Dry spray booth for painting 3) Dust extraction booth 4) Ducted solvent extraction system 5) Ducted paint oven system 6) Reciprocator for electrostatic spray guns 7) Wagner 30:1 high-pressure pump for solvent-based electrostatic installation 8) Protective enclosure for low-pressure ASAI system 9) Flow coating system 10) Low-pressure pump for ASAI electrostatic installation

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: Serien-Nr.: A84P 01022, overall weight: 1,445 kg, Maximum pressure: 350 bar Pgedpsy Tad Njfx Abkon Flow rate: 840 l/min Main pressure relief valve setting: 760 bar

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: Serien-Nr.: A84P 01021, overall weight: 1,445 kg, Technical data: Maximum pressure: 350 bar Flow rate: 840 l/min Pgodjy Tab Ujpfx Abkjn Main pressure relief valve setting: 760 bar

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: Serien-Nr.: A84P 01020, overall weight: 1,445 kg, Technical specifications: Psdpfxey S U Ute Abkegn Maximum pressure: 350 bar Flow rate: 840 l/min Main pressure relief setting: 720 bar

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: Serien-Nr.: A84P 01019, overall weight: 1,445 kg, Maximum pressure: 350 bar Flow rate: 840 l/min Pgodpfsy S U R Isx Abkjn Main pressure relief valve setting: 720 bar

Condition: good (used), Year of construction: 2001, functionality: fully functional, IMA HKA manual edge banding machine in fully functional condition. Edge banding machine for shaped parts. Various pneumatic hoses have just been completely replaced. Edge thickness: 0.4 - 3 mm Board thickness: 16 - 45 mm Strip feed: 20 - 50 mm Power consumption: 2.6 kW Minimum outer radius: Dependent on the bending suitability of the edge material Minimum inner radius: 150 mm, depending on the material properties With gantry and spring tension Vacuum clamping table with 4 switchable zones Rollers, vacuum supports (plus additional new rubber sets) for the vacuum table Pgjdpfx Asx H Un Asbken #C1

Condition: good (used), Spare parts suitable for a high-performance universal lead and feed screw lathe VOEST DA 210-2000 - Apron (clutch box) - Lead, feed, and shifting screw - End bearing block Pjdpfx Absw Sfigsksgn - Spindle support - Change gears - Rack bars Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Pedpfx Aswhv Rnobkjgn

Year of construction: 2022, condition: new, 1 x Niro-Tech MB2 boot-washer, brand new: Dimensions – 1260mm wide x 2000mm long x 1080mm high. Electricity – 400v, 50hz. colours. Manufactured in AISI 304 stainless. Pgjdpfshq Rd Usx Abkon

Condition: good (used), Year of construction: 2003, Parts cleaning device, IBS, – used - : Price per unit: €350 (net) Pgodpfex El A Ujx Abksn Manufacturer: IBS Scherer GmbH Model: Type F2 Year of manufacture: 2003 Serial number: 44675 Power connection: 1/N/PE 230V, 50Hz Rated power consumption: 18W, 0.2A Load capacity: 60 kg Width: 800 mm Net weight: 50 kg Drum size: 50-litre drum Frame material: sheet steel Height: 1125 mm Cleaning medium: special cleaner Cleaning tank width: 790 mm Cleaning tank depth: 540 mm Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: ready for operation (used), inner diameter: 1,500 mm, inner dimension height: 900 mm, pressure: 4 bar, temperature: 90 °C, load capacity: 800 kg, operating pressure: 4 bar, For sale: a spray washing machine from the Finnish brand Aqua Clean. The entire unit is made of acid-resistant steel and additionally insulated. The washing area has a diameter of 150 cm and a height of 90 cm. The machine allows for setting the working time and temperature up to 90°C. Spraying is performed from below, from the side, and from above under a pressure of 4 atmospheres. The pump has had its seals replaced with Viton seals, which are resistant to harsh chemicals. It also features an exhaust fan for removing fumes. The load capacity is 800 kg. A video demonstrating the machine in operation is attached to the advertisement. Transportation is possible throughout the EU. Podozgx H Tepfx Abkjgn

Condition: used, Year of construction: 2019, Overview This keg handling package consists of a M+F Keg Technik Monomat + RMT keg washing system, a keg filling unit, and a large quantity of stainless steel kegs in various sizes, complemented by beer taps. The system is suitable for small to medium-scale brewery operations, enabling cleaning and filling of kegs for beer distribution. The washer was manufactured in 2019 and offers a compact and efficient solution for keg processing. Technical data Keg washer manufacturer: M+F Keg Technik Keg washer model: Monomat + RMT Year of manufacture: 2019 Capacity: approx. 12 kegs/hour Keg filler: Included (manufacturer unknown) System type: Semi-automatic keg washing and filling setup Equipment Keg Technik Monomat + RMT keg washer Keg filling system (standalone unit) 195 x 30 L stainless steel kegs (Type S/A) 39 x 50 L stainless steel kegs (Type S) 22 x 20 L stainless steel kegs (Type A) 22 x 10 L stainless steel kegs (Type S) 10 x beer taps (various manufacturers) Pgedoy D Ertopfx Abksn

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 2,900 mm, total width: 620 mm, total height: 1,500 mm, for approx. 100 E2 crates/hour incl. crate turner (single-person operation) System layout: 1. Zone – Main washing zone: – with a centrifugal pump with 2.2 kW (900 l/min at approx. 1 bar) distributed over a total of 50 stainless steel nozzles, which enable thorough cleaning of all 4 sides. A plate filter continuously cleans the washing solution and filters it continuously. – Tank volume 180 l – Washing temperature in the main washing zone 50-55°C The crate transport takes place via a spiral (KITZINGER utility model), which ensures precise crate separation and an unobstructed impact of the washing solution for comprehensive cleaning of all sides. 2. Zone – Rinsing area: – The products cleaned in the machine are thoroughly rinsed from all sides with fresh water. The fresh water must be at least 45°C when fed to the machine and is heated to approx. 80°C in the system. Approximately 250-300 l are required per hour. Pgjdpfx Aeza Dvujbkon Technical data: – Overall length of the base machine: 2000 mm – with crate turner: 2500 mm – with crate turner and discharge table: 2900 mm – Machine width: 620 mm – Machine height: 1500 mm – Washing tunnel passage width: up to 430 mm (adjustable) – Washing tunnel passage height: 330 mm – Total heating power: boiler 1 x 10 kW – Pump power: 2.2 kW, 900 l/min at 1 bar – The housing is completely welded and consists entirely of stainless steel. The substructure is largely made of 3 mm sheet metal and is therefore very durable. The machine has the following connections: – Fresh water at least 45°C, 3/4″, – Flow pressure at least 1, max. 6 bar via hose connection, – Consumption approx. 300 l/h, IMPORTANT: the machine requires warm fresh water, connection 1/2″ or 3/4″ – Electricity 14 kW, 400 V, 50 Hz, 32A fuse – Wastewater DN 40 to floor drain or channel near the machine, below the machine tank with standpipe – with main switch – powerful centrifugal pump – system on stainless steel rollers – sloping discharge side for returning water to the bottom of the crates

Condition: used, Type: AE 100 S Part No.: 202-00023 Steps/revolution: 1024 Model/Version: 471/V001 Pgedpfx Aboy Apcmoksn Interface/Code: Parallel/Binary Output level: Push/Pull +(11-27) Volts Option: F/R, Latch incremental adjustment

Condition: used, Falch 3 phase high pressure cleaner 500 bar pressure @ 15lpm only done about 360 hours and works perfectly. Sold with trigger but no hose used for cleaning boat hulls stone work excavator tracks and any cleaning where very high pressure is required Pgjdpsxc Numofx Abkon

Year of construction: 2014, condition: excellent (used), IWM EDI13A Utensil washer Serial: 1282 Pjdpsix Ixqjfx Abkegn 2014, stainless utensil washer, ideal for trays, pots, pans, pan washer cycle 2mins to 10mins, cleaning chamber 1300mm L x 700mm W x 800mm H, 13.7Kw, 3Ph

Condition: excellent (used), Year of construction: 2015, Gyson Orbit 600, electrically heated and rotary washing machine, in very good condition Pgjdpevlplhjfx Abkjn new price 73,500 pounds / 88,200 euros year of manufacture 2015

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Completely stainless steel Pjdpfxjh Eazzo Abkogn Container Max 180mm wide & 250 hight as-is or tested and adjusted to costomer needs

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 133 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 895 HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Pgodszgr T Hjpfx Abksn Discharge capacity [l/h]: 900 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85-155 Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 133 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel-braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dispensing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Year of construction: 2023, condition: new, Parts washer designed for cleaning HP Indigo BID print units : uses existing HP imaging oil for the cleaning process with integrated pump and filtration unit . Designed with direct input from HP digital press users to create an effective and user friendly BID cleaning system for HP presses. Pgedpfx Abjlblxqeken Tel : 00 44 7711 894733

Condition: reconditioned (used), functionality: fully functional, operating pressure: 140 bar, empty load weight: 94 kg, input voltage: 230 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 558 CSX Eco HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A built-in hose reel allows for easy rewinding and storage. A durable brass head with new ceramic pistons and seals guarantees long, trouble-free operation. A highly efficient single-phase motor ensures stable operation even during prolonged use. With operating parameters of 140 bar and 550 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 558 CSX Eco Power supply (V): 230 Performance (l/h): 290-550 Pressure (bar): 30-140 Max. temperature (°C): 80/155 Connected power (kW): 3.2 Fuel tank (l): 16 Fuel consumption (kg/h): 3 Podpfx Abezgc Riekogn Weight (kg): 94 Dimensions (L x W x H) (mm): 940 x 600 x 740 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows for dispensing cleaning fluid directly through the machine Highly legible and Intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Year of construction: 2022, condition: new, 1 x Niro-Tech SHM2 pass-through hygiene station, comprising of boot-wash, hand sanitising/disinfecting station and turnstile. The boot-wash features traditional rotating brushes which clean and disinfect work shoe / boot bottoms with automatic dispensation of disinfection / sanitising fluid. The hand-sanitising station automatically doses sanitising solution when hands are inserted in the specially designed sockets. Can be manufactured so as to run Right – Left or Left – Right depending on your factory requirements. Dimensions – 1620mm wide x 1080mm long x 1400mm high. Electricity – 400v, 50hz, 3 phase. Manufactured in AISI 304 stainless steel. Pedpfohr Rqlex Abkegn Brushes can be chosen in blue, red or white colours.

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. AFM Andrychow, FUM Poreba, FAT Wrocław, AVIA Warszawa, Jafo Jarocin, ZM Tarnow, FAMOT Pleszew. Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ 630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series. Pedjum Ixxspfx Abkogn

Condition: new, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Pgodpfsuladkjx Abken