Used Paper Rolls for sale (7,839)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM Godpfx Aoh U Rzgedmott HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Four-head paper drill. Several pieces available !!! Brand Hang Model 106DTK4 Details 4-head paper drilling machine With adjustable drilling heads Operation Electric foot switch, 2 speeds Available directly This additional information is standard for this model. Always check the details carefully during your visit. The 1975 Hang 100DTK4 printing machine is an iconic and reliable piece of equipment that has made a significant impact on the printing industry. Manufactured by Hang, the machine offers advanced features for its time and set the standard for high quality and efficient printing. Gjdpfx Adoudl Ikomott The Hang 100DTK4 features a robust and durable design, ensuring stability and consistent performance during the printing process. Its printing technology, although conventional by today's standards, allowed for precise and sharp prints with satisfactory resolution for its era. Equipped with user-friendly controls and mechanical automation, the machine offered programmable settings for various printing formats and configurations. Its operation required skilled operators who were able to achieve accurate and repeatable printing results. The printing machine's capabilities extended to a variety of substrates, including paper, paperboard and lightweight cardboard, satisfying a range of printing applications common at the time. Launched in 1975, the Hang 100DTK4 presented a technological advance for its era. Its sustained performance and contribution to the printing industry are remarkable. While newer printing machines with advanced digital technology have emerged, the Hang 100DTK4 remains a historic symbol of performance and innovation in the printing industry in the 1970s. The machine has collector's value and serves as a testament to the evolution of printing technology over the decades.

Condition: excellent (used), Year of construction: 1995, Cutting width: 920 mm Color display with operator-guided graphics Variable pressure clamp — ideal for different material types Air table with blower for effortless material handling Gtsdjx Tdr Rspfx Admjt Includes RB2 jogger Includes elevator Spare knives included

Condition: good (used), Polar Mohr N78 Plus Paper Cutting Guillotine Machine after inspection, ready to work. Like new. Year of production 2014. Technical data: Cutting width 780mm Stack height 120mm Gsdpfx Aox Ty H Rsdmstt 21.5″ LCD display 400V power supply Weight 1400kg Enlarged side tables. Chrome table surface Table backlight and optical cutting line Smoothly adjustable pressure force Additional covers for the rear table. Spare knife, sticks, tapping block, operating tools.

Condition: used, Year of construction: 2011, Programmable photocells Gtsdpfox Hxvdsx Admet

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Canon imagePRESS C10000VP colour production system. Item for sale: 1 x Canon imagePRESS C10000VP with the following equipment: Includes Fiery Server Includes Paperdeck POD D1 Includes Booklet Finisher A-N2 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 8,669,430 pages Colour: Approx. 6,566,291 pages Black: Approx. 2,103,239 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Gtodpexzpxcofx Admst A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Year of construction: 2021, condition: new, New high quality ISITAN IRM 1550 x 140 Plate Bending Machine – powered sheet metal bending rolls 3 Rolls – other sizes and capacities in stock Gtsdpfohpchyox Admst STANDARD FEATURES & SPECIFICATIONS Easy operation with mobile control panel with push buttons Conical bending device Very suitable for light and medium plates, aluminium or stainless steel Built according to EC Safety Directives and has CE Mark Manual Drop-End for easy removal of finished ferrule Hot rolled SAE 1050 (CK 45) Steel Rolls Main motor with Brake System Precision Bending with Brake Motor SAE 1050 Quality Certificated Steel Rolls with high tensile strength Two rolls powered by a single gearbox and gear system for top and bottom rolls Spheroid Cast Iron Main Frames Wire grooves at the end of the rolls Precision Bending with Brake Motor Model IRM 2550×140 produced standard with motorised back roll Specification on these 1550mm x 4mm powered bending rolls in the chart below: MODEL Usefull length mm Bending capacity mm Roll diameters Ø mm Roll speed m / min. (dk.) Motor power kw Wire grooves dia. mm Length mm Width mm Height mm Weight kg IRM 1050 x 110 1050 4 110 3 2.2 4 / 7 / 9 / 13 2200 750 1000 990 IRM 1050 x 130 1050 5 130 3.5 2.2 4 / 7 / 9 / 13 2200 750 1000 1200 IRM 1270 x 120 1270 4 120 3 2.2 4 / 7 / 9 / 13 2470 750 1000 1115 IRM 1270 x 140 1270 5 140 3.5 2.2 4 / 7 / 9 / 13 2470 750 1000 1350 IRM 1550 x 110 1550 3 110 3 2.2 4 / 7 / 9 / 13 2700 750 1000 1200 IRM 1550 x 140 1550 4 140 3.5 2.2 4 / 7 / 9 / 13 2700 750 1000 1420

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 72632, cutting width (max.): 920 mm, Equipment: documentation/manual, safety light barrier, first owner Gjdpsx Tfh Hjfx Admstt

Condition: excellent (used), plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: Plastic strapping band 8 rolls Ovp -Type: 5 x 0.5 mm core 200 mm -Width: 5 mm Gtodowpgf Sspfx Admot -Roll: Ø 395 x 190 mm -Price/Delivery: complete -Transport dimensions: 800/800/H390 mm -Total weight: 87 kg

Condition: good (used), Nagel Citoborma 280B Paper Drill The device is 100% functional. This is one of the newest models. The drill table is adjustable in every plane (sides, front/back). It has limiters for setting the drilling spacing. The installed table is in an enlarged version. Additionally, the paper drill has an automatic table lock, which is released after each cycle. Super condition. Solid construction – weight 76kg. 380V power supply Two drilling heads, with adjustable spacing within the range of 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. Gsdpfx Adox Tvliomott The machine has been inspected The set includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, Year of construction: 2008, Manufacturer: Kolbus / Cermi • Model: XCR 650 • Machine Type: Front-Cut / Front Cutting Unit for Flap and Brochure Production • Application Area: Print Finishing / Book and Brochure Manufacturing • Function: – Gathering channel with feed and alignment of brochures – Opening of inserted flaps – Front-Cut: Precise front cut for processing flap brochures – Automatic feeding and stacking of finished products • Fields of Application: – Processing of flap brochures and similar print products – Inline integration into finishing or binding lines – Can also be used as a stand-alone machine Gjdpfx Adox Hxq Ismjtt • Format Range (typical): – Max. trimmed size approx. 480 × 350 × 50 mm – Min. trimmed size approx. 125 × 100 × 3 mm – Max. untrimmed size approx. 480 × 375 × 50 mm – Min. untrimmed size approx. 125 × 105 × 3 mm • Performance: – Mechanical output depending on settings up to approx. 6,000 cycles/h (single cut) – Throughput mode up to approx. 8,000 cycles/h possible :contentReference[oaicite:1]{index=1} • Special Features: – Precise front cut for demanding brochure formats – Suitable for inline production lines – Robust, industrial-grade design • Typical Industries: Print finishing, bookbinding, printing houses

Condition: good (used), functionality: fully functional, With this offer, you are purchasing a used Konica Minolta AccurioPress C3080 colour production system. Item for sale: 1 x Konica Minolta AccurioPress C3080 with the following equipment: Includes Intelligent Quality Care Unit IQ-501 Includes Paper Deck PF-707m Includes Booklet Finisher FS-513 Includes feeding unit Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 1,783,104 pages Colour: approx. 1,342,253 pages Black: approx. 440,808 pages Condition: This offer is for a used device, which may show signs of wear Gtjdpfxsxzn H Ss Admst (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: excellent (used), machine/vehicle number: 511.1012.471, Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area. Godpfxsxugxte Admett

Condition: excellent (used), functionality: fully functional, cutting width (max.): 65 mm, Electric Guillotine Cutter 6655 Gsdpfx Adex Aktdsmstt Professional electric guillotine cutter with touchscreen control panel, EASY-CUT, automatic clamping system and a cutting length of 650 mm Cutting capacity: 80 mm thickness Cutting length: 650 mm Table depth: 610 mm Minimum cut: 25 mm

Condition: ready for operation (used), Professional, heavy-duty version by HANG (German quality) in neat, complete condition. Highly suitable for binderies, printing shops, and print departments. ⸻ Specifications • Brand / Model: HANG 107-30 electronic • Serial number: 102553 • Year of manufacture: 2002 • Number of drilling heads: 4 pieces, individually adjustable • Electronic control, automatic drilling cycle • Power connection: 400V – 50Hz – 6A • CE certification present • Cast iron frame, extremely robust construction • Manual and automatic operation • Adjustable stops with fine adjustment • Machine is mounted on swivel casters (easily movable) ⸻ Condition • Removed from production in working order • Drill spindles and guides run smoothly • No damages, normal signs of use • Immediately ready for operation • Complete, as shown in the photos ⸻ Description The HANG 107-30 is one of the most robust paper drilling machines on the market. Heavier-duty and more professional version than the standard models, thanks to the sturdy drilling heads, automatic drilling cycle, and reliable electronic control system. Perfect for calendar production, book blocks, brochures, index tabs, and more. ⸻ Price 👉 € 3,250 net (0% VAT export possible) Gtjdpfsx A Izlox Admot

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, How do you do? We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Gtedpsuanqajfx Admot Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2016, Paper Cutting Machine Polar D 56 ECO Year of manufacture: 2016 Item no.: L945 Gtedpsuzk Uajfx Admjt Price: 15,500 FCA Germany

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Konica Minolta AccurioPress C6085 colour production system. Item for sale: 1 x Konica Minolta AccurioPress C6085 with the following equipment: Includes Paper Deck PF-707m + LU-202XLm Includes Intelligent Quality Care Unit IQ-501 Includes Finisher FS-532 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 4,000,890 pages Colour: Approx. 3,061,050 pages Black: Approx. 939,840 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. Gsdpfx Aexy Hz Sjdmstt For more information, please feel free to contact us personally.

Condition: good (used), Year of construction: 1985, cutting width (max.): 550 mm, Accessories Spare blades Gjdpfx Ajxpdm Rodmett

Condition: good (used), Year of construction: 2013, machine/vehicle number: 82N1223, Paper cutting machine Polar 80 ECO, year of manufacture: 2013, machine number 82N1223, air table, light barriers, program control, in good condition, immediately available Godpfx Asx Aghwjdmjtt

Condition: good (used), Year of construction: 2001, Polar Mohr 115 E Gjdpfxexzb Age Admjtt Year: 2001 Pile turner PW-4-ABV Elevator 10.4" TFT color display Programmable with memory Side air table Unloader

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a Polar 92 X in excellent condition. This machine is a reliable industrial cutter designed for professional use in printing, finishing, and packaging/labeling environments. Ideal for precise cuts and efficient workflows. Gedox H Nb Ropfx Admjtt Highlights: - Robust Polar industrial quality (durable, precise, proven in production) - Clean and exact cuts, even with high volumes - User-friendly controls ("X" model) - Suitable for paper, cardboard, and similar materials Condition / Scope of delivery: Very good Machine as shown/offered Inspection and test run available by appointment Optionally available as a package: On request, we can sell the Polar as a bundle including a pallet jack (ideal for handling paper stacks/pallets in production). The package price is accordingly higher – details and offer available upon request.

Condition: new, sheet width 1070 mm plate thickness 4 mm distance between columns 1100 mm diameter of upper rolls 110 mm total power requirement 5,0 KW Godpsvki E Sjfx Admott weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 0,9 x 1,1 mm

Condition: good (used), Year of construction: 1992, machine/vehicle number: 6211448, Paper cutting machine Polar 92 EM-MON, year of manufacture: 1992, working width: 92 cm, air table, side table, light barriers, program control, machine number 6211448, in good condition, immediately available. Gjdex Af R Depfx Admett

Condition: new, sheet width 2070 mm plate thickness 4 mm Gsdefv H A Uspfx Admjtt distance between columns 2100 mm diameter of upper rolls 140 mm weight of the machine ca. 0,37 t