Used Paper Punching Machine for sale (65,837)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Polar 66 paper cutting machine, manufactured in 2000, machine number 70H1275, with programmable control and light barriers, in good condition, available immediately. Gedpfszivdnjx Aafouf If you are interested, we will be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility, by prior appointment.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, cutting width (max.): 1,150 mm, Equipment: safety light barrier, Polar 115 EM paper cutting machine, manufactured in 1982, with programmable control, air table, and light barriers. In good condition and available immediately. If you are interested, we would be happy to provide you with information about other machines in our inventory. Gujdpfx Aajzivbmofof You are welcome to inspect the machine at our facility, by prior appointment.

Condition: used, 2-spindle paper drilling machine Gsdpewv S S Djfx Aafjuf

Condition: used, Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Guodpfx Aezmwnpjafjf Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T

Condition: good (used), functionality: fully functional, Boschert Compact Rotation 1000x2000 Equipped with the Trumpf tool system and featuring the Boschert rotation, which enables continuous 360° rotation of the punching tool up to tool size III. Punching force: 28 tons. Gjdpfxeznu T Ee Aafeuf Spray device. Chip extraction system.

Condition: good (used), functionality: fully functional, Boschert EL 300 Guedpoznu H Sofx Aafef The Boschert EL 300 is a manual punching machine with a punching force of 28 tons. Equipped with a Trumpf tool holder, dies up to size III (pitch circle 105 mm) can be installed. It offers continuous stroke, single stroke, and jog mode operation. In addition to the standard foot pedal, the punching stroke can also be activated via a two-hand control, which is particularly useful for workpieces where the acrylic shield must remain in the upper position (e.g., L-shaped brackets), allowing operation via the two-hand control. The integrated drawers are ideal for storing punching tools and accessories. The simple operation and quick tool change make this machine accessible to everyone.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7411231, Size 92 cm, Program, Spare knife, big side tables Machine no: 7411231 Gujdpfx Aajwnqwcjfef

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,100 h, Manufacturer TRUMPF Type TruMatic 1000 - 1600 Fiber (K07) Year 2018 X-axis travel 3000 mm Laser nominal power 3000 Watts Control system Bosch CML 45 Punching force 16.5 to Max. sheet thickness 6.4 mm Max. material weight 150 kg Standard configuration Machine ⦁ Box frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 stations for clamps and tools ⦁ Hydraulic clamps (3x) ⦁ Drives with maintenance-free AC motors ⦁ Follow-up device with programmable pressure foot ⦁ Foot switch for closing the clamps ⦁ Part separator chute, right ⦁ Part removal flap, left ⦁ Sensor for part removal flap ⦁ Work area lighting ⦁ FocusLine ⦁ SortMaster Compact (retrofit option) TRUMPF Laser ⦁ LLK according to standard layout (10m) ⦁ Laser power control ⦁ Laser log function ⦁ Enclosed beam guidance via laser light cable (LLK) ⦁ Separate power supply for the TruDisk Compact cutting unit ⦁ Solid-state laser compact cutting system ⦁ Protective glass ⦁ Collision protection ⦁ ControlLine Punching head ⦁ Delta drive ⦁ Rotatable single-station tool adapter ⦁ Programmable pressure foot position ⦁ Tool length compensation ⦁ Punch spray lubrication ⦁ Punch slug vacuum Godozgfnqopfx Aafsuf ⦁ Forming function ⦁ Punching stroke counter Control system ⦁ TRUMPF control system based on Rexroth IndraMotion MTX ⦁ Touch panel with TFT 19" color screen ⦁ Integrated technology data ⦁ Programmable cutting gas pressure ⦁ Interface for remote maintenance ⦁ Automatic shutdown with wake-up function ⦁ Program manager ⦁ Production plan Options: Copper cutting package Brass cutting package Compressed air cutting Outfeed of small parts Brush tables Multitool Sensor for part separator chute Sign function, quick beading Multibend Thread forming Deburring roll technology Sorting function for part separator chute Height-adjustable clamps

Condition: used, Year of construction: 2003, functionality: not functional, machine/vehicle number: 2053, punching force: 240 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, overall weight: 12,000 kg, compressed air connection: 10 bar, cutting force: 24 t, Equipment: safety light barrier, We are offering this used, non-operational Rainer LUX1220 T.T. punching/nibbling machine, manufactured in 2003, free of charge, provided it is dismantled and collected by the buyer. Accessories: Various tools. Model: LUX1220 T.T. Machine number: 2053 Year of manufacture: 2003 Gsdpfxszivd Ue Aafeuf Punching force: 240 kN Weight: 12,000 kg If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), 2 units for sale. Machines are operational. Good condition. Ready for work. Gujdpfx Aaswb Sx Isfef

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Gedozrfdiopfx Aafsuf Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pressing force: 220 kN Sheet metal thickness – max.: 8 mm Travel distance – x: 3000 mm Travel distance – y: 1500 mm Positioning speed, X-axis: 90 m/min Positioning speed, Y-axis: 60 m/min Positioning speed, simulation: 108 m/min Positioning speed, rotary axis: 360 °/sec Punching diameter: 76.2 mm Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 pieces Guodpfx Aaszil Dkofsf Tool change time: 1.5 - 6.5 sec Machine weight, approx.: 11,050 kg Dimensions: 6400 x 5800 x 2100 mm including setup cassettes including tool cabinet with tools including Quick-Set

Condition: used, Year of construction: 1998, functionality: fully functional, Punching force: 165 kN Working area: 2070 x 1280 mm Gujdpfxozilz Ao Aafjf Sheet metal thickness: 6.4 mm Control system: CC 220 Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis: 80 m/min Y-axis: 55 m/min Machine weight, approx.: 8000 kg

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Godpfx Ajzg U R Ijafeuf Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Total power requirement: 9.5 kW Space requirement approx.: 7395 x 6540 x 2072 mm Equipment: Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Control system: Gjdpfxey Sak Ts Aafsuf - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm - SheetMaster - Operating hours: 65,000 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours Gjdoza Urgjpfx Aafjuf EQUIPMENT Sheetmaster Toolmaster Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): TECHNICAL DETAILS Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Sheet thickness max.: 8 mm Punching force max.: 180 kN Workpiece weight max.: 230 kg

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: Gusdpfx Aou Tg Spjafsf 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width Gjdpfx Aajzp I Hhefouf – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation Gjdjzg D I Nspfx Aafeuf - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools - 6 x tool carts

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Serial number: 134361 Year of manufacture: 2012 Control: Fanuc series 160 I PB Max. sheet size: 3000 x 1500 mm Godsyyk Uropfx Aafouf Machine weight: 15,100 kg

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Guedpfjzph Raex Aafef Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Polar Mohr 115 XT Paper Cutting Guillotine This machine is in very good condition, ready for production, after a service inspection. Low mileage. Year of manufacture: 2010. This is the most valued guillotine brand, a flagship product. A jogging and elevator are available for retrofitting. Gedpfx Ajzph N Noafeuf Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with a 15″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: used, Engine and gearbox from an Allgaier, part of a Bihler GRM 80, model year 1984. ATTENTION!! This offer includes only the engine and gearbox as shown in the images. According to the previous owner, the gearbox was overhauled and has not been used since the overhaul. Gsdpfx Ajzl Ez Ioafjuf

Condition: refurbished (used), functionality: fully functional, The IDEAL 5222 Digicut is a professional stack cutter for digital printing. Electromechanical blade drive. Hydraulic drive for the clamping beam. Infinitely adjustable clamping pressure (min. 200 daN, max. 1100 daN) with a display on a manometer. Foot pedal for pre-clamping or as a cutting guide. Clamping beam cover. Electrically operated back gauge with professional program control. Electronic handwheel with infinitely adjustable speed for manual fine adjustment of the back gauge. Optical cutting guide with bright light-emitting diodes (LEDs). Clamping beam guided on both sides for uniform clamping pressure. Precision back gauge spindle. 520 mm cutting length 80 mm stacking height 90 mm trim with clamping beam cover Dimensions: L 131 x W 95 x H 109 cm (width increases to approx. 165 cm including side tables) Weight: 328 kg Clamping pressure: Infinitely adjustable from 200 to 1100 daN Safety: Electronically controlled safety light curtain on the front table Electronic control module for the back gauge: Gujdjzi A Hvspfx Aafsf Digital dimension display, dimension indication in cm/inches (display accuracy 1/10 mm). Direct dimension input via a numeric keypad. Memory function for chain cuts, additional automatic memory. 99 programs with 99 program steps each (up to 9 chain dimensions can be saved as one program step). Machine self-diagnosis with error display on the display. 230 volts / New TÜV inspection / New blade. Machine is in very good condition. Operating manual is also included. Delivery possible in the Rhine-Main area. Collection possible, shipping possible.

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 53,000 h, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840 D, laser type: CO₂ laser, laser power: 3,200 W, punching diameter: 76 mm, sheet thickness steel (max.): 8 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, quick-change device, safety light barrier, Special equipment: + 2000 on Laser TruFlow 3200 + Blow-out device for small parts + Thread forming function with thread former breakage monitoring + MultiShear function + Slitting function + Marking/Fast chamfering function + Softpunch function + Re-punch cylinder + Vibration-damped mounting + Chip conveyor with tilting container + Additional clamping arm Manufacturer's standard description: Standard equipment: Guodpfx Aaozdc Hmjfsf - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Cutting head quick-change system - Programmable cutting gas selection/pressure setting - Capacitive height control Dias III - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater - 18 tool cassettes - 18 die plates - Automatic tool changer with 19 stations - 2 clamping arms - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic re-punching - Tool length compensation - Fast shutdown of the hydraulics - Automatic shutdown - 2 automatic dividing slides for parts 500 x 500 mm each - Sensors for both dividing slides - 2 scrap bins - Punch scrap extraction - Forming capability - Programmable stamping tool lubrication with 2 containers - Programmable pressure plate - Adaptive stroke length control - Safety devices - Remote diagnostics system - RJ 45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual