Used Paper Punching Machine for sale (65,245)

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Nodpfx Aeudn Utogwokw Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Nkjdjykt N Sspfx Agwow Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition Nodpfx Agjxf Utaowekw

Condition: good (used), Year of construction: 2011, operating hours: 87,995 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Machine - Working area 3000 x 1500 mm - Rigid, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear magazine with 18 tool stations incl. 3 clamps - Drives with maintenance-free three-phase motors - Repositioning device with programmable hold-down - Ball tables - Part chute 500 x 500 mm - Good parts bin - Chip container - Automatic shut-off - Initial oil fill - Transport and installation device Punching head - Hydraulic punching head - Rotatable mono tool holder - Manually adjustable hold-down force - Programmable hold-down - Tool length compensation - Punch pin spray lubrication - Slug extraction - Forming Control - Open control based on Siemens Sinumerik 840D - Operator panel with 12" TFT color display - Program management - Integrated technology data - Remote teleservice via Internet - Integrated e-shop Programming - Shopfloor programming based on TruTops Punch Basic - Easy programming Data transfer - USB interface and network connection Safety - CE marking Njdpfoyvugqsx Agwekw - Multi-beam safety light curtains - Hydraulic quick-stop - Sheet bulge detection - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Engraving function - Deburring and roller technology - Marking/rapid bead function - MultiShear function - Adaptive stroke calibration - Spray lubrication for die - Active die - Additional clamp - Individually opening clamps - Repositioning cylinder - Sensor for part chute - Vibration-damped installation - Sheet bulge detection - Chip conveyor with tilting container - Brush tables with loading and unloading aids - Ejector device for small parts Automation SheetMaster Standard features: - Peeling suction unit - Vacuum sensors - Central lubrication - Sheet thickness measuring device for double sheet detection - Automatic clamp closing - Modular suction plate - Simultaneous loading and unloading during main time GripMaster - Scrap skeleton tongs with sensors - Scissor lift table 400 mm - Scrap skeleton pallet tiltable 1250 x 2500 mm ToolMaster 40 - Simultaneous operation for ToolMaster SortMaster Pallet L2

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Side air tables L & R Central air table Cutting area illumination Variable pressure hydraulic clamp 2 x HSS knives Safety knife change device - machine assisted Nksdpfjydnw Djx Agwew Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Specification: Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Power requirement : 3 kW

Condition: good (used), Manufacturer: LVD STRIPPIT Type: Global 20 FANUC Control: FANUC 180i-P Year of manufacture: 2006 Thick turret WILSON tool system Under power inspection possible Large package tooling WILSON Auto indexing rotation tools included Laser safety guids included Specifications Metric US standard Table load 150 Working area X axis 2500 mm Working area Y axis 1250 mm Working area X axis with takeover 5000 mm Punching force 20 T Max. sheet thickness 6 mm Turret positions 30 Auto index. positions 4 Positioning speed X and Y axis 4500 mm/min. Turret change speed 900 rpm Nsdpfev Ic Tqjx Agwokw Dimensions (estimate) Length 6400 mm Width 5600 mm Height 2445 mm Weight 16500 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), Ideal 5221-95 EP Nodpfsyttlxex Agwokw

Condition: good (used), Year of construction: 1996, cutting width (max.): 920 mm, cutting length (max.): 920 mm, The following services and repairs were performed: - New color display - Hydraulic oil change: 02/2026 - Gear oil change: 02/2026 Nedpfx Aeyuydkjgwokw Year of manufacture: 1996 Working width: 920 mm Stacking height: approx. 120 mm Air table: Yes Light barriers: Yes Total number of blades: 2 Documentation: Yes, copy of the operating manual Blade changing device: Yes

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App Njdpfxeyu S D As Agwekw SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left Nodpfjyw I H Tex Agwskw y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: good (used), Year of construction: 1999, functionality: fully functional, cutting width (max.): 780 mm, Paper cutting machine Schneider Senator 78 E-Line, working width 78 cm, programmable control, air table, light barriers Nksdpfjyu Ii Ujx Agwow

Condition: used, Year of construction: 2000, Pressing force 28 t X-axis 2000 mm Y-axis 1000 mm machine weight ab. 11000 kg Nedpfx Asyv Nnpegwokw

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale: 1 piece used hole punch Manufacturer: Geka type: Puma 110 2HI Punching force: 110t incl. documentation Nkodpfouihvzsx Agwow Dimensions see type plate Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: good (used), Year of construction: 2002, Ref:11061 . 2002 Polar 78ES Guillotine Programable 78cm guillotine. Comprising: Central air bed Polar graphic operator guidance and colour TFT display Keyboard programming with static back gauge Computer programme with 99 programmes, 999 cuts instructions Metric/Imperial measurement scale Motorised back gauge / fast and slow speed with micro-adjustment Variable pressure hydraulic clamp Optical cut-line indicator Overload protection circuit 10 beam light barrier with FFM guarding 2 knives Tools and manuals. Specification: Cutting width, Max: 78 cm Clamp opening, Max: 11.5 cm Feed depth, Max: 78 cm Power required (main drive) : 1.9 kW Njdpoya E R Tofx Agwjkw

Condition: used, total length: 1,700 mm, total width: 820 mm, total height: 1,570 mm, Empty weight: 580 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4077950107003 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 38 - Round bar cutting capacity [mm]: 32 - Shearing width [mm]: 300 - Max. plate thickness shearing [mm]: 15 - Options: Length stop - Transport dimensions: 1700mm x 820mm x 1570mm (l x w x h) Nedpfsymfbfsx Agwekw - Transport weight [kg]: 580kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,100 mm, total width: 1,670 mm, total height: 1,900 mm, Empty weight: 1.930 kg - Documentation available: No - CE certificate present: No - Serial number: 4422758897010 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 60 - Punch throat depth [mm]: 400 - Notching width [mm]: 70 - Max. plate thickness notching [mm]: 13 - Round bar cutting capacity [mm]: 40 - Shearing width [mm]: 400 - Max. plate thickness shearing [mm]: 20 - Options: Length stop - Transport dimensions: 1100mm x 1670mm x 1900mm (l x w x h) - Transport weight [kg]: 1930kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Nedpfx Aoymfa Uegwskw

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Nsdpfx Aewnhd Hjgwekw Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Options: Length stop Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Price: On request Thickness 45 mm Maximum pressure 70 tons Punch cutting machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Power: 70 tons Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No Nkodpsw Ryxmefx Agwow - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 70 - Notching width [mm]: 250 - Max. plate thickness notching [mm]: 6 - Round bar cutting capacity [mm]: 45 - Shearing width [mm]: 450 - Max. plate thickness shearing [mm]: 15 - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Paper jogging table Make: POLAR Type: RAB 5 Format: 800 x 1200 mm Year: 1996 Machine No.: 6681336 Equipped with air removal. Nedpfx Agsyvd Szswokw More photos and video available. Price on request.

Condition: used, Year of construction: 2011, Machine number 8161027 Built in 2011 Nedpfxjxx Tu Ao Agwekw Max. paper length 12 cm Max. paper width 78 cm Air table Yes Side table left Yes Side table right Yes Photo cells Yes Length x width x height 2000.0 × 2280.0 × 1700.0 Weight 1300 kg

Condition: good (used), Year of construction: 2002, Format trimmed: max 300 x 400 mm, min 85 x 115 mm Untrimmed format: max 320 x 460 mm, min 100 x 125 mm Output: max 6,600 c/h Equipment: - Fully automatic infeed with integrated stack counter - Cut counter - Cutting blower - 1 set of pressing plates and holders - 1 set of plate tables - 3 sets of cutting bars - 2 sets of knives - External device for knife change with setting gauge - Central lubrication - Operating instructions Nksdpfxoqqkvqj Agwsw - Electrical circuit diagrams - Standard tools - Standard accessories

Year of construction: 2014, condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. Nsdpfxjkkcqqo Agwokw The machine can be pushed using rollers and secured using brakes. The machine can be demonstrated with power.

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Nedpjk S Htxefx Agwokw Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Nsdpsu Tg Spjfx Agwekw Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 21000 kg Table Table load 160 kg Nkodpfxsx Enlxj Agwsw Main Drive Number of axis 2 Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching