Used Panel Saw Altendorf for sale (126)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18-03-12-070, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, Equipment: rotational speed infinitely variable, Manufacturer-refurbished Altendorf F45 ProDrive with angle miter fence and Digit L display! TECHNICAL DETAILS Maximum cutting length: 3,000 mm Cutting width at rip fence: 1,300 mm Table length: 840 mm Main saw blade diameter: 450 mm Saw blade projection 90° with single-sided tilt: 154 mm 90° with double-sided tilt: 154 mm +45° with single-sided tilt: 105 mm +45° with double-sided tilt: 105 mm -45° with double-sided tilt: 78 mm MACHINE DETAILS Power: 7.5 kW (10.20 HP) Bsdpfxexc Ufqe Abbsdk Dust extraction connection Upper extraction: Ø = 80 mm Lower extraction: Ø = 120 mm Negative pressure: 1,200 Pa at total extraction connection, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Continuously variable speed Template holder Front support roller Air cushion table WGA Digit-L PA 1300 mm CNC

Condition: excellent (used), Year of construction: 1977, Panel saw Scoring unit Year of manufacture 1977 1250 mm to the right of the blade Cutting length 2800 mm 5.5 kW Bdsdpfx Abowc Svpebek Dimensions approx. 2800 x 1200 x 950 mm Weight approx. 900 kg

Condition: good (used), Year of construction: 1988, Altendorf TKR 90 panel saw Year of manufacture 1988 Mach. No.: 88-11-153 Motor 11.0 KW / 400 Volt Cutting length 1400 mm Cutting width 1000 mm Max. saw blade Ø 450 mm Max. cutting height 155 mm Speeds 3000/5000 rpm Parallel protection device Table extension Bdjdpfsvxhilsx Abbjk

Condition: new, Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, power: 5 kW (6.80 HP), sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual Bedjuh R R Espfx Abbsdk - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Bdsdpfstxh Niex Abbjk

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Bsdpfxjwf Hdgj Abbodk Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16-08-12-016, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, Equipment: rotational speed infinitely variable, Factory-reconditioned F45 with EvoDrive control & additional features!\n\nTECHNICAL DETAILS\n\nMax. cutting length: 3,000 mm\nCutting width at rip fence: 1,300 mm\nSaw blade diameter: 450 mm\nTable length: 840 mm\n\nMACHINE DETAILS\n\nMotor power: 5.5 kW\n\nFEATURES\nInfinitely variable speed control\nScoring unit\n2-axis scoring unit with tilting function\nRAPIDO for single-sided 2-axis scoring unit\nLED illumination on scoring unit\nDouble roller carriage, 3,000 mm length\nAngle stop 90° – 3,200 mm\nCNC rip fence\nSTEG/second support on double roller carriage\nLASER cut line indicator Bdsdpfx Ajxc Ub Ssbbek

Year of construction: 2023, condition: new, machine/vehicle number: 23-04-35-001, F 25 version 3 Manual height and tilt adjustment 0 - 46° of the saw blade with digital display. Motor 5,5 kW, 2 speeds 3.600 / 4.200 rpm. Double roller carriage 3200 mm, rip fence incl. fine adjustment and DIGIT X (digital display of the cutting width) Bdsdsf A Ehtopfx Abbjk Cutting width 1000 mm, Angle miter fence, cutting to length up to 3450 mm, scoring unit Basicwith LED light Saw blade diameter max 315 mm, saw blade projection max 104 mm, Cutting height max 100 mm, at 45° max 70 mm, large suction hood (PSV), incl. option front support roller, immediately available from stock Seevetal, subject to prior sale without transport, assembly and instruction

Condition: reconditioned (used), Year of construction: 2003, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,350 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, with scoring motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, power consumption 13.5A 400V 50Hz, max. saw blade diameter 400 mm, main motor 5.5 kW, extraction port 1x D=120 mm 1x D=80 mm, electric height adjustment, electric angle adjustment – as returned by customer Bjdpfswt A Ecex Abbsdk

Condition: used, Year of construction: 2005, functionality: fully functional, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 3,400 mm, height adjustment type: electric, power: 5.5 kW (7.48 HP), Panel saw Manufacturer: Altendorf Type: F45 Elmo CE Year of manufacture: 2005 Bodpfxsvnrmye Abbedk Carriage length: 3,400 mm Cutting width: 1,300 mm Cutting height: approx. 171 mm Max. saw blade diameter: 500 mm Speed: 2,000 - 6,000 rpm Cutting width adjustment: Electric Motor brake: Yes

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 85-10-116, Equipment: scorer, Machine no: 85-10-116, Type: TKR 45 Table: 1400X400mm Vorrizer, Bodowkha Tepfx Abbodk

Condition: ready for operation (used), in very good condition. Bdjdpfxowx Hw Hj Abbsk

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: GM010.0310, cutting length (max.): 3,300 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), Manufacturer-refurbished Altendorf F45 with comprehensive ElmoDrive control system! TECHNICAL DETAILS Carriage Lengths and Cutting Lengths Carriage length (double roller carriage): 3,400 mm Cutting length with angle fence: 3,300 mm TIP-SERVO-DRIVE: 2,990 mm Max. blade diameter: 550 mm Saw Blade Blade diameter: 550 mm Blade projection at 90°: 204 mm Blade projection at +45°: 141 mm MACHINE DETAILS Bodpew I Rtcsfx Abbjdk Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse protection: 25 A Dust Extraction Connection Extraction (top): 80 mm Extraction (bottom): 120 mm Negative pressure: 1,200 Pa at main extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Extendable cross-slide table widening Display DIGIT L

Condition: good (used), Manufacturer: Altendorf Model: WA 80 Electromotive extension and swiveling of the main saw 5.5 kW motor Double-guided chassis on steel guides (Altendorf patent), locking in end and middle position, length 3200 mm Undercutter 0.75 kW Cutting width up to the right parallel stop 1350 mm Parallel stop on the left side Disc diameter max. Ø 500 mm Bjdow Hgkcjpfx Abbodk Table extension 840 mm

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, Power rating: 380V 5.5kW Star-delta switch Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Bsdpev Uqa Eefx Abbedk Parallelogram guard with narrow cover Cross table with stop Rip stop Scoring unit WITHOUT miter stop

Condition: ready for operation (used), Year of construction: 1993, Altendorf F45 Elmo TECHNICAL DATA - Maximum main saw blade diameter without scoring unit: 450 mm - Electric height and tilt adjustment of the saw blade - Digital angle display - Digital display on the crosscut table, telescopic fence - Digital display on the rip fence Bodjw Ullaopfx Abbedk - Prepared for the retrofitting of a scoring unit - Arbor diameter: 30 mm - Arbor lock - Cutting length on sliding table: 3200 mm - Cutting width at the rip fence: 1000 mm - Main motor: 5.5 kW - 4 speed settings: 3000/4000/5000/6000 rpm - Electronic speed display - Extraction port diameter: 80, 120 mm - Saw blade guard - Mitre fence Year of manufacture: 1993 Price: 6800.- Function tested

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Bdodpfx Abew Ix Alebek

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Bdjdpfx Ajwrfmajbbok Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 2,900 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), Altendorf F45 with comprehensive ElmoDrive control equipment! Bdjdpfxjwynhpo Abbjk TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Dust extraction connection Extraction top: 80 mm Extraction bottom: 120 mm Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Bdodpfx Abjwrb U Tsbsk

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 74-4-10, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Saw length mm: 2600 cutting width mm: 1.300mm Bjdeipvrbjpfx Abbodk Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: good (used), Year of construction: 1990, functionality: fully functional, Circular saw Altendorf F 45 Year of construction 1990 Manufacture: Altendorf Germany carriage length: 3200 mm Manual height and angle adjustment rip fence 1250 Scoring unit 0.75 kW Motor power: 5, 5kW Bdsdpfor Eq Spjx Abbok 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 with scorer 350mm Upper intake guard Altendorf Automatic motor brake Weight approx. 1200 kg Technical data subject to change

Condition: good (used), Duplex DD double mitre fence for Altendorf panel saws Modified for use on Altendorf panel saws with steel guide rail, from approx. year 1998 onwards. Cross-cutting up to approx. 1400 mm Digital display of angle and cutting length with automatic angle compensation eliminates the need for test cuts. Bedpfsw Nxu Dox Abbedk The protective film shows minor damages that do not affect functionality or operation. Machine demonstrations can be arranged by appointment at our premises. We only offer machines that are ready for demonstration and in stock, see 'further offers from this supplier.'

Condition: used, Year of construction: 2024, machine/vehicle number: 24-11-21-004, Neue Ausstellungsmaschine!! Listenpreis 18.670€ netto Sägeblattverstellung • Elektromotorische Höhen- und Schwenkverstellung 0-46° für das Hauptsägeblatt • Digitale Schwenkwinkelanzeige Sägeblattüberstand • max. 150 mm, Sägeblattdurchmesser max. 450 mm Bedienpaneel • am Maschinenständer Doppelrollwagen Bsdpfew Tfy Iex Abbsdk • Wagenlänge 3000 mm inkl. stufenloser Oberwagenverriegelung Parallelanschlag, Schnittbreite 1000 mm • manuelle Verstellung inkl. Feineinstellung, einstellbar über Maßskala Winkel-Gehrungsanschlag, Ablängen bis 3500 mm • manuell einstellbar über Maßskala Antriebsleistung und Drehzahl 5,5 kW (7,5 PS) mit 3 Drehzahlen, 3/4/5.000 U/min, manuell verstellbar Werkzeugspannsystem AKE für das Hauptsägeblatt

Condition: used, Year of construction: 2023, machine/vehicle number: 23-08-14-008, Neue Ausstellungsmaschine! Listenpreis 64.270€ netto Grundausstattung: Handguard: M18178 -ElmoDrive-Steuerung -VARIO Motor 5 kW (6,8 PS) (beidseitige Schwenkung) -Winkel-Gehrungsanschlag DIGIT LD Ablängen bis 3.200 mm -CNC-Parallelanschlag 1000 mm -Ein-/Aus-Schalter am Doppelrollwagen -Vorlagenhalter inkl. Optionen.: -Wegschwenkbarer Kameraarm M44155 -Vorbereitung für 2-Achs-Vorritzsystem M24038 -Doppelrollwagen 3.200 mm M34204 -Vordere Auflagerolle M44450 HAND GUARD Das weltweit erste und einzige KI- und kamerabasierte Sicherheitsassistenzsystem für Formatkreissägen ElmoDrive-Steuerung In der F 45 ElmoDrive steckt die modernste und umfassendste Steuerungstechnik für Formatkreissägen. In Augenhöhe angebracht, vereint sie höchsten Bedienkomfort und Übersichtlichkeit mit praxisnaher und ergonomischer Anwendung. 12 Touchscreen Über diesen Screen rufen Sie alle Funktionen auf. Im unteren Teil des Bildschirms können regelmäßig benötigte Funktionen abgelegt werden (Desktop-Funktion) CNC-Parallelanschlag Steuerbar mit einer Verfahrgeschwindigkeit von 250 mm/Sek. und mit einer Positioniergenauigkeit von +/- 1/10 mm. Das fünffach gelagerte, hochpräzise Kugelumlaufspindelsystem ist wartungsarm und genauso wie der Motor gut geschützt in das Aluprofil integriert. Der Anschlag erkennt automatisch seine Position, insbesondere im Gefahrenbereich des Sägeblatts. -Vordere Auflagerolle Mit einer Breite von 300 mm ist sie beim Schneiden langer Werkstücke am Parallelanschlag eine hilfreiche Unterstützung. Sie kann mit einem Handgriff um 90° unter den Doppelrollwagen (Mindestlänge 3000 mm) positioniert werden. -Vorlagenhalter Bodpfx Aeqylftjbbsdk Praktisch ist der Vorlagenhalter direkt an der Steuerung in Augenhöhe. Die Stücklisten werden durch eine Klemmung fixiert, so haben Sie Ihre Aufträge permanent im Blick. Mit der integrierten Stiftablage haben Sie Ihr Schreibwerkzeug immer griffbereit.