Used Packers for sale (290)

Condition: used, Year of construction: 2015, Overview This Atlanta Giotto is a single-lane wrap-around case packer for end-of-line carton packaging of PET bottles, rated at more than 20 cartons per minute. It erects the wrap-around case around the bottle group from a flat blank held in an inclined magazine, and closes it with a hot-melt glue unit. Neutral and printed carton both run on the machine. The machine was built in 2015 and ran on a mineral water bottling line until early 2025, packing 1.5 l PET bottles in 4 x 3 cartons and 1.0 l PET bottles in 5 x 3 cartons. It was operated alternately with a shrink-film bundling process, so its operating hours are low. Control is a Siemens S7 PLC with a touchscreen HMI panel. Infeed and outfeed conveyors, motorisation and the CE control panel are part of the machine. Technical data - Manufacturer: Atlanta - Model: Giotto - Year of manufacture: 2015 - Machine type: single-lane wrap-around case packer - Capacity: more than 20 cartons/minute - Infeed: single lane, inclined carton magazine - Carton formats: 80 x H262 mm for 1.5 l PET bottles, 87.5 x H322 mm for 1.0 l PET bottles - Pack patterns: 4 x 3 bottles in 1.5 l PET, 5 x 3 bottles in 1.0 l PET - Carton: neutral or printed - Case closing: hot-melt glue unit - Control: Siemens S7 PLC with touchscreen HMI panel - Length: approx. 7,175 mm machine body, plus 1,300 mm infeed conveyor - Width: approx. 2,345 mm - Height: approx. 2,336 mm - Infeed height: min. 1,050 mm - Weight: approx. 800 kg magazine section, approx. 2,250 kg packer body Nwedpfx Akjzxtyreisn - Power supply: 25 kW - Compressed air: approx. 400 Nl/min at 6 bar - Infeed belt: acetal, 685 mm wide Equipment - Infeed and outfeed conveyors - Inclined carton magazine - Hot-melt glue unit - Motorisation and CE control panel - Siemens S7 control with touchscreen panel - Electrical and mechanical drawings - Service and maintenance manuals - Spare parts books Condition Used, in very good condition with a low number of operating hours. The machine was in production until early 2025 and has since been dismantled and moved into storage. It can be inspected dismantled in the warehouse by appointment. Availability Immediately available. Location: Italy. Lifting, craning, loading and transport are available on request and are not included.

Condition: used, Year of construction: 2016, Overview This CEEM TSS-1845 is a fully automatic side-seal shrink-wrapping machine with an integrated shrink tunnel, built in 2016. Products are fed on the conveyor, wrapped in transparent shrink film with a continuous side seal, and passed through the heat-shrink tunnel to form a tight, retail-ready transparent pack. The machine handles single items as well as grouped products. The side-seal unit is manufactured by Alpha Pack Europe (Italy) as model APSS-5022 and supplied under the Spanish CEEM brand (Grupo CEEM Packaging S.A., Elche). A constant-temperature thermal system provides uninterrupted sealing; product changeovers are made simply by turning the hand-wheels, without changing product guides, and product-length sensors allow automatic length control via the touch-panel control. The machine is still installed and under power and can be inspected on site. Technical data - Manufacturer: CEEM - Grupo CEEM Packaging S.A. (Elche, Alicante, Spain) - Model: TSS-1845 (side-seal unit OEM: Alpha Pack Europe APSS-5022) - Year of manufacture: 2016 - Machine type: fully automatic side-seal shrink-wrapping machine with shrink tunnel - Applicable film: POF / PE / PVC, thickness 0.05 - 0.08 mm - Max. sealing width: 500 mm - Max. product height: 220 mm - Packing speed: 30 - 45 packs/min - Conveyor speed: up to 30 m/min - Film reel: outer Ø up to 400 mm, core Ø 75 mm - Power: approx. 3 kW, 380 V - Compressed air: 5 - 6 bar - Weight: approx. 850 kg (side-seal unit; shrink tunnel additional) - Side-seal unit dimensions: approx. 2,100 x 1,960 x H 1,900 mm (excl. tunnel) Equipment - Automatic side-seal sealer with motorized film unwind and continuous side sealing - Heat-shrink tunnel with adjustable temperature control - Touch-panel control, hand-wheel format changeover, product-length sensors - Infeed conveyor Condition Used - in very good, clean condition; still installed and under power at the current site and available for inspection on request. Nwodpszk H Nksfx Akion Availability Immediately. Location: Spain. Dismantling, handling and truck loading can be quoted on request (EXW). The machine can be visited on request.

Condition: ready for operation (used), Year of construction: 2008, Two Meypack case packers from the same packaging line, one in left-hand and one in right-hand version, are available. Packaging type: WA carton, max. packaging capacity: 17cycles/min, infeed height: 1450mm, discharge height: 650mm, multipack length range: 200mm-600mm, multipack width range: 120mm-300mm, multipack height range: 80mm-350mm, blank length range: 360mm-1000mm, blank width range: 300mm-700mm. Machine dimensions X/Y: approx. 5000mm/2450mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Expected to be available starting end of July 2026. Nwsdoy Rtf Iopfx Akijn

Condition: used, Year of construction: 2001, Overview This SMI LSK 30T is a shrink wrapping machine for PET bottle packs, built in 2001 by SMI (Italy) and fully overhauled in 2023. It groups two packs into one bundle, wraps the bundle in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 30 packs per minute. It currently bundles 0.33 l and 0.50 l PET multipacks into 6 x 4 bundles. The machine runs film only (printed and oriented film); it is also equipped for trays, a mode that has never been used. It is in production only 3 to 4 days per month, so its working hours are low. Technical data - Manufacturer: SMI (Italy) - Model: LSK 30T - Year of manufacture: 2001, overhauled 2023 - Machine type: shrink wrapping machine for grouping packs, with integrated shrink tunnel - Output: up to 30 packs per minute - Current formats: two 0.33 l or 0.50 l PET packs grouped into one 6 x 4 bundle - Wrapping: film only, printed and oriented film; prepared for trays (never used) - Control: SMI POSYC touchscreen HMI, COSMOS servo drives, fibre-optic machine bus, CE control panel - Gearboxes: Bonfiglioli - Location: France Equipment - Two-lane infeed conveyor, each lane carrying 3 x 2 packs - Pack grouping station (2 packs into 1) - Film wrapping unit with film reel unwinder and double reel holder (manual change) - Integrated heating and shrink tunnel with chain conveyor - One controller for the whole machine, including conveyors and film table; only the infeed guides are adjusted to the bottle diameter - Format parts and spare parts, including a new original SMI POSYC 3000 HMI (2026, not yet installed) and further new original SMI parts Nwsdps Afut Refx Akijn - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Condition The machine is in good condition. It was fully overhauled in 2023 with original SMI replacement parts and is still installed and in production. It can be inspected in operation by appointment. Professional dismantling is included. Availability The machine stays in production until December 2026 and is available for loading from the end of December 2026. It is located in France.

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Njdpfx Aom Nckfjkiown

Condition: used, Year of construction: 2013, Used Wrap Around SGE year 2013 – 3000 boxes/hour General Technical Description The Used Wrap Around SGE year 2013 – 3000 boxes/hour delivers high-efficiency carton packaging for PET and glass containers. S.G.E. manufactured this machine in 2013, and since then, it has served as a reliable solution for secondary packaging in bottling lines. Not only does the structure support demanding industrial use, but it also ensures consistent and repeatable operation. Furthermore, the machine integrates seamlessly into most bottling layouts. Importantly, the Used Wrap Around SGE year 2013 – 3000 boxes/hour reaches this output capacity thanks to the integration of a divider insertion system, which places cardboard dividers (commonly known as alveare) between bottles. This feature stabilizes the packs during carton folding and gluing operations, and ensures safe handling, especially in multi-row configurations. The machine is configured to work with bottles of 0.75 L and supports multiple carton formats, including 3×2, 3×4, and 3×6. This format versatility enhances its adaptability across a wide range of packaging needs. Configuration and Performance of this Used Wrap Around SGE The Used Wrap Around SGE year 2013 processes up to 3000 cartons per hour, both in the 3×2 and 3×4 formats. Consequently, the 3×2 configuration yields 18,000 bottles per hour, while the 3×4 configuration handles 36,000 bottles per hour. The 3×6 configuration further extends the machine’s capacity, allowing even higher bottle output depending on the production layout. The machine uses a straight-line infeed system that guides bottles into the carton blank positioning area. Once the bottles are in place, the system folds a flat carton blank around them and seals it using hot-melt glue. The entire process—forming, folding, and gluing—is mechanically synchronized to ensure high packaging precision. Moreover, the modular design allows for fast format changes and simplified maintenance. Above all, the machine maintains stable output even during peak production. Electrical and Mechanical Specifications The machine operates on 400 Volts, 50 Hertz, and draws a maximum of 42 kW. This power supports key functions such as motorized feeding, carton forming, and gluing. Additionally, S.G.E. designed the wrap around with rugged components, which resist wear and ensure long-term reliability. In fact, engineers can easily access all mechanical areas, simplifying maintenance and diagnostics. For this reason, the machine suits production environments that require both uptime and durability. Safety and Operational Condition Njdewbgzdjpfx Akijwn S.G.E. equipped this Used Wrap Around with a complete set of safety devices. Therefore, the machine complies fully with European safety regulations for operator protection. At present, it remains in storage; however, all its main systems are preserved under controlled environmental conditions.

Condition: good (used), Year of construction: 2009, Manufacturer: Audion Elektro Nwodsht Hkkspfx Akisn Type: AVP 600-2 Year of construction: 2009 Power 0.7kW AUDION Veggiepack is a unique semi-automatic packaging machine for round vegetables, such as lettuce, cabbage, broccoli, cauliflower etc. The product is dense polypropylene or they are wrapped in styrofoam so that no unnecessary foil is left around the product. The product is protected from damage and the round packaging underlines its appearance. Product features: Sealed at the bottom of the product Empty foil and product separately Film positioning with photocell sensor Fast warm-up time No air compressor required Adjustable packing density AVP 600 specifications The size of the machine (HxWxH): 1230x830x960mm Machine weight: 220 kg Sealing bar: heat seal Film: (perforated) CPP, OPP, polystyrene Foil thickness: approx. 15 microns Foil width: 520-600 mm Product Length: Up to 220mm Product Height: Up to 175mm Production capacity: Max. 550 / hour Voltage: 230V / 1ph / 50Hz Power consumption: 700 watts

Condition: used, Year of construction: 2004,

Condition: used, Year of construction: 2003, Overview This Kettner Blitzpac Junior E 3T bottle packer, manufactured in 2003, is designed for the automatic packing of PET bottles into beverage crates. The machine is configured for the 20 x 0.5 l crate format and is equipped with 4 packing units, each with 4 x 5 positions, matching the required 20-bottle crate layout. The system uses an automated gripper head / matrix gripper assembly to pick bottles from the conveyor lanes and place them into crates. The machine includes stainless steel lane guides, modular chain conveyors, SEW-Eurodrive gearmotors, pneumatic components and safety guarding with protective fencing and transparent panels. The machine is identified as Kettner Junior E 3T / Blitzpac Junior E 3T. Technical Data - Manufacturer: Kettner GmbH / Krones Group - Machine Type: Bottle packer / crate packer - Model: Blitzpac Junior E 3T - Year of Manufacture: 2003 - Application: Packing of bottles into crates - Format: 20 x 0.5 l crate - Configuration: 4 packing units, each with 4 x 5 positions - Gripper System: Pneumatic matrix gripper for bottle handling - Conveyor System: Modular chain conveyor with stainless steel lane guides - Drive System: SEW-Eurodrive gearmotors Nodpfxezbg T Eo Akiswn - Safety: Protective fencing, transparent guarding, safety / sensor equipment - Electrical Supply: 230 / 400 V AC - Current Type: 3-phase - Frequency: 50 Hz - Nominal Current: 13 A - Condition: Used, installed in industrial bottling environment

Condition: used, Year of construction: 2007, Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details Nwjdpfx Akjtq Dzhjion - Capacity: up to 60 packs per minute - Recently packed: - 3x4 cardboard - 4x6 cardboard - 0,5 L glass bottles - 0,33 L glass bottles - Other formats possible

Condition: used, Year of construction: 2008, Overview  This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data  - Capacity: - 60 packs/minute with 2x5 (10 bottles) - 40 packs/minute with 4x5 (20 bottles) - Packing type: Wrap-around carton box - Carton dimensions: - Length: 120 – 300 mm - Width: 210 – 400 mm - Height: 100 – 350 mm - Formation of packs: 2x5 and 4x5 Nodpfx Ajwhf S Ujkiewn Scope of Delivery  - Meypack VP 531WA wrap-around packer

Condition: used, Year of construction: 2006, Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  - Capacity: 30,000 bottles/h (0.33 L, 6-packs) - Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm - Formation of packs: 2×3 (six-pack wraparound) - Operating hours: 1,677 - Construction: Full stainless steel Nwedpfx Aksw T Sthjijn - Glue type: Hotmelt Scope of Delivery  - Wraparound packer | Krones | Solidpac | 2006 - Infeed conveyors for bottle supply and dividing system  

Condition: used, Year of construction: 2004, Used case packer APE INCA 2000 year 2004 Nwjdpfx Akevgvdyeisn The APE Impianti INCA 2000 bottling machine optimizes filling processes in the bottling sector. It provides high performance and adapts to various production needs. APE Impianti manufactured the INCA 2000 model in 2004 with a focus on robustness and reliability. Its full stainless steel construction also ensures corrosion resistance, delivering long-lasting durability in high-demand environments. Capacity and Operating Speed of the Case Packer APE INCA 2000 The INCA 2000 operates at a rate of 6000 bottles per hour. It maintains high-speed standards without compromising filling accuracy. This capacity meets the demands of intensive bottling lines, improving production flow. Additionally, it minimizes machine downtime. Companies needing high daily volumes gain a particular advantage from this speed. Container Specifications The APE Impianti INCA 2000 bottling machine works with glass containers. This compatibility ensures both stability and durability during the bottling process. It supports 0.75- and 0.375-liter bottles, adding versatility for different product lines. Its precision meets the beverage sector’s standards, where filling uniformity and container integrity are crucial. Head Configuration and Structure The machine uses 12  heads, which provide stability and consistency. The heads are arranged in two sets of 6 or one set of 12. This flexible configuration optimizes flow based on specific production needs. The modular structure also allows easy maintenance and replacement of heads without reducing productivity. Operational Orientation The operator side is located on the left, making control straightforward during monitoring and adjustment. This layout enables easy access to key components during routine operations and maintenance. The left-side position reduces intervention times and increases operator safety. Construction Material and Durability The INCA 2000’s stainless steel structure provides resistance to corrosion and offers structural stability. This feature also ensures hygienic safety, crucial in the food industry. Stainless steel minimizes the need for extraordinary interventions, which adds maintenance value and longevity. This choice of material meets the mechanical and chemical resistance required for intensive production. Conclusion of the Case Packer APE INCA 2000 The APE Impianti INCA 2000 bottling machine offers both efficiency and durability. It provides a speed of 6000 bottles per hour, compatibility with different glass formats, and a modular head structure. These features meet the challenges of modern bottling lines. Its stainless steel construction and ergonomic layout deliver efficiency, precision, and durability. For companies focused on quality and productivity, this machine is a valuable investment.

Condition: used, Year of construction: 2001, Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data - Manufacturer: Kisters Maschinenbau GmbH - Model: Wrap Around Packer 420/50 - Machine Type: Wrap-around packer / secondary packaging machine - Year of Manufacture: 2001 - Capacity: up to approx. 50,000 bottles/hour - Operating Hours: 16,976 h - Application: Packaging of PET one-way bottles - Previous Use: PET one-way beverage line - Current Status: Taken out of operation due to line reconfiguration - Bottle Formats: 0.33 l, 0.355 l, 0.5 l - Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats - Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 - inkl. shrink application for trays  - Listed Formats: - 0.33 l LNB 2x12 tray - 0.355 l LN 2x12 tray - 0.33 l LNB 4x6 tray - 0.355 l KN 4x6 tray - 0.33 l LNB 3x8 tray - 0.355 l LN 3x8 tray - 0.5 l LN 4x6 tray - 0.5 l LN 6x4 tray - 0.5 l LN 4x6 KLW full carton - 0.33 l LN 4x6 loose wrap-around - 0.33 l LNB 4x6 90° tray - 0.355 l LN 4x6 90° tray - 0.33 l BA 4x6 loose wrap-around - 0.33 l BA 3x4 loose wrap-around - 0.33 l Miller 4x6 loose wrap-around - 0.33 l Salitos 4x6 loose wrap-around - 0.33 l Vichy 4x6 tray cluster - 0.33 l LN 4x6 tray cluster Nodpfx Ajy Sidvekiewn - 0.33 l LN LCE 4x6 full carton - 0.33 l EW 4x6 export full carton - 0.33 l EW 4x6 export tray - 0.5 l EW 4x5 loose wrap-around

Condition: used, Year of construction: 2005, Overview  This shrink hood applicator was manufactured in 2005 by Italy MARFIN. The machine is designed for packaging of PET products on pallets using shrink hood application. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  - Capacity: up to 50 pallets/hour - Formats: - 1.5 L – 3×2 – 1200 × 800 Nsdpfx Asy Hmp Eekiown - 0.5 L – 4×3 – 1200 × 800 - Application: PET - Configuration: Shrink hood applicator

Condition: used, Year of construction: 2006, Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details - Capacity: - Up to 45 packs / minute on single lane - Last production was 16,000 bph (six packs) - Bottles formats: PET bottles with shrinkable PE film - 12 x 0,33L - 6 x 0,50L - 6 x 0,33L Nwodpfsw En Ugsx Akien - 24 x 0,50L - Machine drive: Siemens S7 - Machine equipped with - Infeed conveyor & CE control panel - Supplied with spare parts

Condition: used, Year of construction: 2003, Used Baumer Wrap Around Packer 2003 The Baumer wrap around packer is a reliable and efficient piece of packaging equipment that is widely used in various industries. This particular model, the Europea 510, was manufactured in 2003 and has been well-maintained over the years. It is in excellent working condition and is ready to be put to use in your production line. Whether you need to pack small items or large ones, this wrap around packer is a versatile and effective solution that can handle a wide range of packaging needs. Nsdpfxevlnvxj Akiown Its high-quality construction and reliable performance make it a valuable addition to any business looking to improve their packaging efficiency and productivity.

Condition: used, Year of construction: 2002, Overview This SMI TF 300 tray forming machine, manufactured in 2002, is designed for the automatic forming of trays in beverage packaging lines. The machine was previously used for packing 4x6x0.5L sixpacks into trays and achieves a capacity of up to 23 packs per minute, making it suitable for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data - Manufacturer: SMI - Model: TF 300 - Machine type: Tray forming machine (tray erector / tray packer) - Year of manufacture: 2002 - Capacity: approx. 23 packs per minute - Application: Tray packing of multipacks (e.g. 4x6x0.5L sixpacks) Equipment Nwedpfsy Hi U Dsx Akion - Automatic tray forming system - Suitable for beverage multipack tray applications - Integration capability into existing packaging lines

Year of construction: 2011, condition: excellent (used), Packer Nwodpfxsv Ur Nzo Akion Brand Redpack Model P325D Year of manufacture 2011 Voltage 380 V Dimensions 5400 x 2000 x 1200 mm Weight 1500 kg

Condition: used, GAP-027-0033 Nodpfxjv Evhve Akiown Unpacker, make BMS, type: Lina EP, with each 3 heads, with pack head magazine for 0,33 lt. longneck bottle + 0,5 lt bottle, format 4x6 / 4x5, with SPS-control, built 2005, already dismantled, ex location for sale. GEP-028-0034 Packer, make Datz, type: EP-2, with 2 heads, for 0,33 lt longneck bottle + 0,5 lt bottle, crate format 6x4 and 5x4, Height of crate inlet 270 mm, height of bottle outlet: 890 mm, built 2000, dismantled, for sale

Condition: ready for operation (used), Year of construction: 2001, Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible. Nwedpfx Asy Dgq Dekisn

Condition: used, Year of construction: 1993, Overview  Nwedey Etqmspfx Akien This shrink packer was manufactured in 1993 by France POLYPACK INDUSTRIES. The machine is designed for shrink wrapping of PET bottles using neutral film with sealing bar. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  - Capacity: approx. 20 ppm - Formats: - 1.5 L – 3×2 - 2.0 L – 3×2 - Application: Shrink packaging of PET bottles - Configuration: Shrink packer with sealing bar (film only)

Condition: used, Year of construction: 1988, Manufacturer : OLI Model: 210 Year : 1988 Type : Semi-automatic side loading case packer Application : To insert grouped cartons of regular shapes into shipping cartons Carton infeed and grouping : automatic Empty box loading: manual Infeed conveyor Nodsx R Dhgepfx Akijwn Outfeed roller conveyor Factory voltage: 220 / 380 V Control voltage: 24 V Max. pressure: 6 bar   Current format: see illustration, adaptation can be quoted separately.

Condition: used, Year of construction: 1993, Fabricant : PRB / Marchesini Group Model : Pocket 3 Year : 1993 Type : Case packer Application: packing cases into boxes Manufacturer data: Case features: side a: min. 200 - max. 550 mm side b: min. 120 - max. 330 mm side c: min. 130 - max. 350 mm Case features: L dimension: min. 20 - max. 550 mm l dimension: min. 10 - max. 130 mm height: min. 75 - max. 200 mm Nwodpfex R Dapjx Akion Tape characteristics: External diameter max: 220 mm Chuck diameter: 77mm Band width: 30 - 60 mm Weight : 1350 kg

Condition: used, Year of construction: 1990, Manufacturer : CERMEX Model : SL1 100 Type : Case packer Year: 1990 Automatic machine for grouping and boxing products Side boxing with tape sealing (adhesive tape) Number of formats available: 5 units (size available on request) Format change via settings + format parts Cardboard box dimensions: Length: 250 to 550 mm Nwodpfox R D A Dox Akien Width: 150 to 380 mm Height: 125 to 325 mm Product dimension : Length: 80 to 170 mm Thickness: 20 to 60 mm Width according to box length