Used Opticut 150 for sale (9,741)

Condition: ready for operation (used), Feeding depth max 1.500 mm Godpfx Aaod Iapysfeuf Feeding height max 155 mm Table height 870 mm Cutting width 1.500 mm Front table length 750 mm Equipment • program • air table • side table right • side table left • light barrier • 2 knives

Condition: good (used), Size: 320 x 420 mm; min 75 x 150 mm Speed: max 9000 Ex./h Number of stitches Standard: 11 Stitching length: 19 mm Power requirements: 50 Hz, 3 Phasen kW (220/380V, 50Hz) Compressed air: 4 bar Weight: 2300 kg (approx.) Engine speed: 2,5 kw Gjdpfx Aaer Duu Aefjuf

Year of construction: 1989, condition: ready for operation (used), Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Godpodubvqjfx Aafjuf Feeding height max 80 mm Equipment • infeed from the right side • automatic infeed with integrated pre stacker • cut counter • Equipment for sheet-fed • 1 set of clamping plates and holders • 3 sets of cutting sticks • 2 set of knives • external knife changing device • central lubrication • belt delivery

Condition: used, all stainless steel nett width 600 mm Godpfx Aaoziaa Tjfsuf 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Guodpfx Aaezp Dn Iefjf Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: used, mileage: 198,098 km, power: 110 kW (149.56 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 2,105 kg, maximum load weight: 1,395 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,400 mm, brakes: other, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 3,050 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, airbag, cabin, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, * Condition, see photos * Body/Superstructure: Box, high and long * Furniture transporter * Non-woven interior walls with cargo securing rails on the right and left * Loading dimensions: Length = 3,083mm x Width = 1,765mm x Height = 1,894mm * Rear tailgate doors, 270 degrees * Sliding door on the right * LED interior lighting * Air conditioning * 3 seats * Rearview camera * Automatic transmission * Cruise control * Load assistant * Radio navigation * Bluetooth phone * Hill descent control assistant * Multifunction steering wheel * Electric mirror adjustment * Heated exterior mirrors * Electric windows * ABS/ASR/ESP * Airbag * Central locking with remote control * Headlight range adjustment * Wheelbase 3682 mm * Permissible total weight 3500kg * Unladen weight 2,105 kg * Payload 1,395kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Guedpfjxl Smdjx Aafef Our offer generally does not include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer regarding the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 9,584 h, pressing force: 153 t, total width: 1,700 mm, total height: 2,820 mm, overall weight: 11,000 kg, controller manufacturer: DELEM, controller model: DA-69T, product length (max.): 3,400 mm, number of axes: 4, This 4-axis PLACKE QPB-4 150/3100 was manufactured in 2001. It features a press force of 1500 kN and a bending length of 3100 mm, making it suitable for various bending applications. The machine includes a mechanical crowning system and comes with a comprehensive set of tooling and accessories. If you are looking to get high-quality bending capabilities, consider the PLACKE QPB-4 150/3100 press brake we have for sale. Contact us for further details. - Control System / Software: Delem DA-69T CNC Control (4 axes)- Operating Hours: 9,584.1 hours- Maximum Operating Pressure: 300 bar- Distance Between Uprights: 2600 mm- Ram Stroke: 215 mm- Installation Height: 525 mm- Throat Depth: 300 mm- Working Height (without table/tools): 900 mm- Rapid Advance Speed: 150 mm/s- Working Speed: 0 - 9.8 mm/s- Return Speed: 100 mm/s- Safety Speed: < 10 mm/s- Stopping Time: 0.15 s- Safety Distance: 270 mm- Ram Dwell Time: 0 - 9.9 s- Drive Power: 11 kW- Total Connected Load: 15 kW- Voltage / Frequency: 400 V / 50 Hz (3 PEN)- Control Voltage: 24 V DC- Current Rating: 30 A- Fuse Protection: 35 A- Hydraulic Tank Capacity: 270 L- Max. Oil Operating Temperature: 80 °C- Oil Filtration on Filling: < 25 µm- Sound Level: < 70 dB(A)- X-Axis Travel Range: 600 mm (Max speed: 400 mm/s, Accuracy: +/- 0.02 mm, Motor torque: 1.9 Nm)- R-Axis Travel Range: 200 mm (Max speed: 200 mm/s, Accuracy: +/- 0.05 mm, Motor torque: 1.9 Nm)- Z1-Z2-Z3-Z4 Axis Adjustment Range: 2400 mm (Manual adjustment)- Crowning System: Mechanical crowning system by Wila (0.6 kW, controlled via CNC)- Tool Clamping / System: Wila Modufix- Operating Ambient Temperature: +5 °C to +40 °C- Operating Humidity: 30% to 95% (non-condensing)- Included Accessories & Tooling:* Foot control panel* Technical documentation (1 set)* Sheet support arms: 2x 1m, 2x 0.5m* Punches (Upper Tools): 5x 515mm (28°, H200); 2x 100mm (28°, H200); 1x 200mm (28°, H200); 1x each 20mm, 30mm, 35mm, 40mm (28°, H200); 2x 100mm (28°, H200 with corner notch); 2x 255mm* Dies (Lower Tools): 5x 515mm (12x30°, R=1, H55); 6x segmented (12x30°, R=1, H55) [Total width 3m]; 4x 515mm; 1x 475mm; 8x segmented [Total width 3m]; 1x 515mm (50x80°, R=5, H55); 1x unspecified; 1x 200mm (V=8, 30°, R=1, H55)* Tool extensions: 1x 1240mm (H140, L410), 2x 50mm (H100), 4x custom-made (H100) Technical Specification Guedszm Unyepfx Aafjf Bending Length 3100 mm

Condition: used, mileage: 37,850 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, first registration: 12/2022, color: yellow, suspension: steel, fuel: electricity, Equipment: ABS, air conditioning, airbag, cruise control, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, traction control, EM1 Driver Assistance System: Driver Fatigue Detection Sensor, 6I1 Driver Assistance System: Lane Assist, 3V6 Speed Control System (Cruise Control) incl. Speed Limiter and Intelligent Speed Assist, 41M Alloy Wheels, 9ZV Mobile Phone Interface with Wireless Charging Function, QK1 Multifunction Camera / Front Camera, 8IT Headlights LED, 1S5 Onboard Tool Kit, Tire Repair Kit and Jack, 9192 Paint: 2-tone paint, solid / metallic, EV3 Charging Cable with Schuko Plug (10 A, Mode 2), 4UF Airbag Driver/Passenger Side, Passenger Airbag Deactivatable, GM1 Acoustic Pedestrian Protection, Exterior Sound (e-sound), 8ZQ Antenna Diversity, 1AC Anti-lock Braking System (ABS), 8AS Audio System Ready 2 Discover (Touchscreen Color Display 10 inches), 7UJ Audio System: Preparation for later activation of navigation function Discover Pro, 6YD Exterior Mirrors Electrically Adjustable, Heated and Folding with Mirror Lowering Function, 5JB Exterior Mirrors Convex, Left and Right, 8GJ DC/DC Converter 3 kW, 1PE Anti-theft Protection for Wheels (Wheel Locks), 4G3 Driver Assistance System: Evasive Maneuvering Assistant and Turning Assistant, 7X2 Driver Assistance System: Parking Assistance Front and Rear, 8J3 Driver Assistance System: Emergency Braking Assistant (Front Assist) incl. Pedestrian and Cyclist Recognition, QR9 Driver Assistance System: Traffic Sign Recognition, 4DE Window in Loading/Passenger Compartment: - Fixed, Front Left, 4EE Window in Loading/Passenger Compartment: - Fixed, Front Right, 4GS Windshield, Laminated Glass, Tinted, 6T2 Footwell Lighting Front and Rear, 3U7 Luggage Compartment Cover / Roller Blind, G1Z Transmission for Electric Vehicle, 3RC Rear Tailgate with Glazing, 4HM Rear Window, 8M1 Rear Window Wiper with Intermittent Operation, J9D HV Battery. Godpfx Aszt Rz Nsafeuf We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! More:!! Leasing/Financing and Trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our website.

Condition: like new (used), Roll Dia.: 150mm Roll Width: 150mm Gjdpfeg Stu Djx Aafjuf Electrical Motor: 2kW

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland Godpfxszulwzo Aafsuf – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: new, functionality: fully functional, mileage: 2,850 km, power: 206 kW (280.08 HP), first registration: 12/2025, fuel type: diesel, overall weight: 15,000 kg, tire size: 395/85R20, axle configuration: 4x4, wheelbase: 4,150 mm, next inspection (TÜV): 12/2026, fuel: diesel, brakes: engine braking, color: brown, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 2, Year of construction: 2023, steering wheel position: left, Equipment: ABS, air conditioning, all wheel drive, compressor, cruise control, differential lock, low noise, onboard computer, parking heater, power assisted steering, seat heater, soot filter, truck registration, NEW VEHICLE, first registration 12/2025, for sale on behalf of a CUSTOMER! Errors and prior sale excepted! WARRANTY EXTENSION to 36 months from the date of first registration! The cab was originally gray; it was repainted in “petra-copper-metallic” – a Land Rover color. The frame and cab were also completely waxed and preserved afterward. A spare wheel holder is now mounted at the rear under the chassis frame. In addition to the standard equipment, the following factory options are installed: Differential lock on the driven front axle Rear axle ratio i = 5.72 Spare wheel, dimension matches chassis tires Batteries 170 Ah for Eurocargo Battery disconnect switch, electrically mounted in the cab Generator 2800 Watts (24 Volt x 120 Ampere) Voltage converter 24/12 Volt (10.5 Ampere) Preparation for toll system (OBU), includes third DIN compartment, antenna and wiring on the dashboard, without receiver unit Front and ramp mirrors are manually adjustable but heated Luxury passenger seat, 4-way adjustable, air-sprung, integrated headrest and seat belt, heated, lumbar support Compressed air connection in engine tunnel console Electronic immobilizer and 3rd vehicle key Driver's seat HI-Comfort, air-sprung, with 3-stage cooling or heating function, multi-adjustable, lumbar and head support, with integrated 3-point seat belt Iveco radio DAB+, Bluetooth, integrated microphone, mini-USB / AUX-in connection, LCD display Air conditioning with manual control Multi-function steering wheel with steering wheel controls Lower bed, folding, 3-part Pollen filter for cab Rearview mirror for body width 2500 mm Windshield and side windows tinted Protective grille for headlights Sun visors for side windows, driver and passenger side Sun protection filter integrated into the windshield Auxiliary heater, diesel/air, with timer (Eberspächer, AirTronic D2), heat output 2.2 kW Preparation for roof beacons Trailer socket for 12 Volt operation, 13-pin Trailer socket for 24 Volt operation, 15-pin Fuel tank in plastic version, with 200 liter capacity, lockable Fuel pre-filter, Racor type, with separator, heated Air tank in aluminum version, number depends on suspension version and trailer version Rear crossmember, D-value 120kN Parabolic spring on the front axle Parabolic suspension on the rear axle Exhaust pipe on the left side Adjustment of exhaust pipe for fording CAN-Bus interface "CAN-OPEN" for body control Air compressor 360 ccm, recommended for trailer operation with continuous braking system For sale on behalf of a CUSTOMER! Errors and prior sale excepted! Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale excepted! Pictures may contain optional equipment that is subject to an additional charge! Gujdpfx Ajzt H Acoafof Delivery date by arrangement! Inspection only by appointment! Address is only the office address, not the vehicle location! Our general terms and conditions apply!

Condition: good (used), Year of construction: 1982, travel distance X-axis: 900 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, quill stroke: 80 mm, quill diameter: 100 mm, total height: 2,000 mm, total width: 1,900 mm, total length: 2,000 mm, table width: 350 mm, table length: 1,250 mm, table load: 400 kg, overall weight: 2,100 kg, Universal Milling Machine, gear type, swiveling and tilting head, feed range X/Y/Z 900/270/450 mm, table size 1250x350 mm, motor 7,5 KW, 12 speeds 45-2000 rpm., ISO 40, quill travel 80 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling device, coolant system, dimensions 1900x2000x2000 mm, weight ca. 2100 kg; accessoires into cabinet Godpsyly Drsfx Aafjuf

Condition: used, Year of construction: 2006, operating hours: 926 h, functionality: fully functional, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, overall weight: 750 kg, Equipment: emergency stop, Hydraulic briquetting press for compressing dry wood chips, sawdust, paper, cardboard, and other similar materials. Throughput (material-dependent) is approximately 30 to 50 kg/h. Gujdpfoztl E Ajx Aafef The machine was inspected at the WEIMA factory after 600 operating hours, and after that, I used the press very little. For this reason, I am offering the press for sale.

Condition: new, functionality: fully functional, empty load weight: 106 kg, maximum load weight: 644 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,470 mm, loading space width: 1,060 mm, loading space height: 300 mm, total length: 2,360 mm, total width: 1,490 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 150 Tipper NEW VEHICLE Internal dimensions: 147cm x 106cm Total weight: 750 Kg Payload: 644 Kg Side panel height: 30cm Unbraked, single-axle, low-loader trailer Side panels made of galvanized sheet steel Godpfx Aszk Hb Hsafeuf Rear side panel can be folded down and removed Easy conversion Bolted and galvanized steel frame Drawbar can be folded down Screen-printed wood floor 13-pole electrical system Rear lamps with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side panels 40cm - Aluminum cover with bracket for e.g. bicycle carrier - Flat cover with or without frame - High cover 80cm - Coarse or fine mesh net - Spare wheel with bracket - Ramps Further accessories available upon request! Pictures are for illustrative purposes and may show optional accessories that incur additional costs. Plus vehicle registration document and freight to Gera 100 € net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repairs, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Gedpfsxhfuaex Aafeuf Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 150 1 Control unit for the mixer 1 Manual shut-off valve 1 Separate control panel ("remote control") Technical data for the 150 series, WBH 150: Parameter | Value Guodpjztwbvsfx Aafsf Nominal volume | 150 l Usable volume | 105 l A | 1,460 mm B | 670 mm C | 754 mm Empty weight | approx. 270 kg Subject to prior sale Please submit inquiries only by email. Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Guodpfx Aaszpxhiofef Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Baumüller frequency inverter 55-88 kW, BUM63A-150- removed from Krauss Maffei KM 18 C3 - removed from running machine - fully functionalmanufacturer: Baumüller Nuremberg Gjdpfx Aaeltrpzsfsuf type: BUM63A-150 spare part no.: 6443081 manufacturer no.: 345449 Dition: gebraucht

Condition: new, Year of construction: 2026, Heavy-duty machine stand guarantees high torsional rigidity and vibration-free operation. Improved sanding results through sanding belt oscillation via a separate geared motor. Oscillation can be switched on or off as desired. Veneer edge sanding device with fine adjustment included as standard. Grooved infeed guide rail for sanding veneer overhangs. Quick changeover from veneer to solid wood sanding. Height-adjustable sanding table to utilize the full sanding belt width. Height adjustment of the sanding table and swiveling of the sanding unit via handwheels. Height-adjustable auxiliary table with dust extraction for sanding radii. Optimal chip removal through dust extraction at the unit and the cross table. Automatic compensation of belt length differences through spring-loaded belt tension. Dimensions and weights Length approx. 1900 mm Width/Depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Dust extraction nozzle diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Power consumption 3 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt running speed(s) 20 m/s Guodpfx Aaeff Ed Tjfof Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short-term

Condition: new, Year of construction: 2026, MBSM 150-20 For grinding surfaces, edges, and for rounding High-torque motors with vibration-free operation to achieve the best grinding results Working height adjustable by stepless tilting of the grinding unit Workpiece support adjustable in angle Continuous flat grinding surface allows grinding of even long workpieces One dust extraction port each on the spark guard and on the rear band roller Protective cover can be folded away Quick belt change in seconds thanks to the quick-release system Simple adjustment of the belt path via adjusting screw Motor with brake and safety switch Dimensions and weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Dust extraction Nominal size of dust extraction port, external 60 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Noise emission Gusdpfehk Df Dox Aafsf Emission sound pressure level at the workplace Lp (idle, without dust extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Grinding belt length 2000 mm Grinding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding Gedov Sk Nnspfx Aafjuf The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: new, Year of construction: 2026, Your advantages Stable pressing mechanism with a wear-resistant, chrome-plated die Press chamber wear bushing Pre-compressor with end-position damping cylinder and screwed-on cover Control panel with PLC control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on a stable base frame with rubber feet Briquette length monitoring Robust design, low-maintenance technology, small footprint: The machines in the C-series are particularly suitable for small and medium-sized businesses whose required throughput of 50-80 kg/h or 200 to 400 kg/day is not exceeded. Virtually any suitable material can be briquetted, such as wood, styrofoam, foam, paper, or biomass. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm) 50 Throughput up to (kg/h) 50 (material-dependent) Hydraulic motor (kW) 5.5 Screw motor (kW) 0.55 Oil volume (liters) 100 Weight (kg approx.) 800 Guodpfx Aaocnz U Esfjf Outstanding features at a glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates the length of the briquette to a uniform size Press chamber wear bushing: Prevents wear in the press area Location: Ex works - free loading

Condition: used, mileage: 108,236 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,400 mm, first registration: 01/2022, fuel tank capacity: 70 l, CO₂ emissions: 199 g/km, emission class: euro6, color: grey, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, sliding door, traction control, = Additional options and accessories = - Android Auto - Apple CarPlay - Attention assist - Automatically dimming interior rearview mirror Gjdpfjy Iqbbsx Aafouf - Heated exterior mirrors - Passenger airbag - Bluetooth - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Rear doors - Hill-start assist - Wooden loading platform - Height-adjustable steering wheel - Cornering light - Lumbar support - Multimedia compatible - Fog lights - Rear parking sensors - Radio - Rain sensor - Rear window wiper - Sliding door on the right side - Start/stop system - Immobilizer - System to prevent secondary collisions - Connected services - Partition = Additional information = General information Number of doors: 5 Model range: Sept. 2019 - Sept. 2024 Model code: T6.1 Cab: standard Technical information Torque: 340 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Transmission: 7 gears, automatic Top speed: 182 km/h Dimensions Length/height: L2H1 Dimensions (L x W x H): 530 x 190 x 199 cm Weights Unladen weight: 1,957 kg Payload: 1,043 kg GVW: 3,000 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Interior Interior: black Fuel consumption Average fuel consumption: 5.9 l/100km Maintenance, history and condition Service booklets: available APK (technical inspection): valid until 05/2027 Number of keys: 3 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: ready for operation (used), Allen Bradley 150-F135NBDD Series B Smart Motor Controller, serial number: MK1UP7DF, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gusdpfx Ajzahw Asafef

Condition: good (used), Year of construction: 2002, Kuka KR150 series 2000 robot Year of manufacture: 2002 Gedjbhgxbspfx Aafsuf Reach: 2700 mm Weight: 1245 kg Payload: 150 kg Controller: KRC2 Weight: 185 kg Software version: V4.1.7 SP08 Kuka KCP2 Connection cables: 7m/15m 22726