Used Okuma Mu 400 for sale (215)

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Application Types Bcjdpex D S Eksfx Aa Uew Milling

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm Bcjdpfx Aaoxmaf Rj Uow swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter OKUMA - MacTurn 50

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: MW130, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis positioning accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Counter-Spindle: - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis positioning accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-station lower turret, all positions driven - Maximum milling speed: 4,500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V, 3-phase, fuse: 151 A - Connected load: 22.5 kVA Bcsdpoxxrbbofx Aa Usw Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm - Weight: 5,500 kg Main Features and Capabilities: - Horizontal construction: Optimal chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q SETTER) - Broken tool detection system: Load monitoring auto-learning analyzer controlled by OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and as a hard copy Machine status: Operative only with main spindle – sub spindle requires repair Optional Equipment - Bar feeder: TopAutomazione model FU352 - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm - Weight: 1,500 kg

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm Bcjdpfx Asxxiiioa Uew - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring Bcjdpfx Asxxidaoa Uow - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min Bjdpfx Aaexxh Udo Uecw - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Bsdpfsxxihfjx Aa Uocw Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW Bjdpfjxb Awfox Aa Uscw MACHINE DETAILS Control: OSP 7000 L Space requirements & Weight Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 Bsdpsxxifksfx Aa Uocw # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 6850 kg Control Unit Brand OKUMA Model OSP-P300LA Main Drive Number of spindles 2 Spindle bore 120 mm Number of axis 5 Bcodpfxjx D Rvne Aa Uew Movement X-Axis Movement 260 mm Y-Axis Movement 115 mm W-Axis Movement 895 mm Workpiece Workpiece drm over bed 580 mm Workpiece drm over support 470 mm Turret Rotating tools Yes This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135667, turning diameter: 280 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-T200L, workpiece length (max.): 200 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm X-axis travel: 210 mm Y-axis travel: 330 mm C-axis travel (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool stations in turret: 12 MACHINE DETAILS Control: OKUMA OSP-T200L Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Bjdpfx Aajxnlh To Ujcw Feeder belt Three pallets Note: The tool holders and tools visible in the working area are not included in the scope of delivery or sale. Any oil mist extraction unit or pallets shown on the feeder belt in the photos are also not included in the sale or delivery.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 109566, turning length: 480 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, spindle diameter: 100 mm, Machine with a large V12 turret for L- or M-sized tools and a hydraulic tailstock. TECHNICAL DETAILS Swivel diameter over bed: 530 mm Swivel diameter over longitudinal slide: 530 mm Swivel diameter over cross slide: 410 mm Number of controllable axes: 4 Bcodpfx Aasv I Tkae Usw Turning length: 480 mm Turning diameter: 340 mm Speed: 4,500 rpm Spindle diameter: 100 mm Spindle Spindle diameter: 100 mm Spindle head type: JIS A2-6 Taper bore: Ø70 (2.75) x 1/10 mm Spindle bore: 62 mm Spindle speed: 38 - 4,500 rpm Longitudinal slide (Z-axis) Axis stroke: 500 mm Feed: 0.001 - 1,000 mm/rev Rapid traverse: 25,000 mm/min Cross slide (X-axis) Axis travel: 280 mm [70 + 210] Feed: 0.001 - 1,000 mm/rev Rapid traverse: 20,000 mm/min Y-axis Axis travel: +70 to -50 mm Feed: 0.001 - 1,000 mm/rev Rapid traverse: 10,000 mm/min Turret Type: V12 Number of tools: 12 (L or M tools) Tool size (external turning tools): 25 x 25 mm Tool size (internal turning tools): 40 mm C-axis Control angle: 360° (increment: 0.001°) Rapid traverse: 200 °/min Tailstock & Motor Tailstock spindle diameter: 90 mm Tailstock spindle stroke: 120 mm Spindle drive motor: 15/11 kW (20 min/continuous operation) Longitudinal slide feed (Z-axis): 6 kW Cross slide feed (X-axis): 4 kW MACHINE DETAILS Machine height: 2,200 mm Floor area: 2,200 x 1,720 mm Weight: 5,200 kg EQUIPMENT - Hydraulic tailstock

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 50- 6.000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 430 [mm] - Max. diameter on bench : 580 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Z stroke : 390 [mm] - X stroke : 260 [mm] - Tool type : V12 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 38 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.200 x 1.734 [mm] - Machine height : 1.839 [mm] - Machine weight : 3.400 [kg] Bsdpfx Aajxz Hrgo Uecw MACHINE HOURS - Number of hours under power : 23.682 [h] - Number of working hours : 11.795 [h] - Number of spindle hours : 7.225 [h] EQUIPMENT - CNC : OKUMA OSP-P200 LA - Interface : Ethernet / RS232 / USB - Interactive programming : Advanced One Touch IGF-L V302A - 3 colors status lamp - Coolant tank - Chips conveyor : Droite MAYFRAN - Tool probe : manuel - Parts catcher - Bar loader : FMB 5-55 /3200 - Electric transformer - Collet chuck : Nann KSF 40/6 -6000 t/min - Collet chuck : TYPE 173E/48F Ø de barre max 42 mm

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS Bodpfxjk R Tp Uj Aa Uscw x-way: 720 mm y-way: 630 mm z-way: 630 mm control: OKUMA OSP 7000 pallet size: 500 x 500 mm spindle speed: 10 - 5000 rpm tool holder: 10-fold pallet station tool holder: MAS BT 50 tool places: 200 pieces EQUIPMENT - tool breakage probe - Renishaw probe - High pressure coolant system - Coolant mist extraction system - Spindle load and torque monitoring - Thread milling - Chip conveyor The scope of delivery is not shown in the pictures but in the description text.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 525 mm, workpiece weight (max.): 680 kg, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: OSP-U100L Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 525 mm Bodpfxowtrbao Aa Uocw Table Load capacity: 680 kg Clamping area: 1,200 mm x 510 mm Tool changer Magazine positions: 20 EQUIPMENT - Chip conveyor

Condition: repair required (used), turning length: 400 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, General information about the machine We are offering a used lathe from the manufacturer Okuma. The machine is offered as a spare parts carrier. The machine is running but not all functions can be guaranteed. The keys for operation are missing. The machine is in our warehouse and can be inspected under power Technical data - CNC control: OSP 5000L-G CNC system (German) - Tool turret: 12 positions - Lathe chuck: 250 mm - Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW - continuous operation) - Spindle bore diameter: 75 mm - X-axis travel: 400 x 0.001 mm - Z-axis travel: 500 x 0.001 mm - Cutting speed XZ: 0.01-1000 mm / U - Rapid traverse up to: 12,000 mm / min. - Power supply: 380V - Rated power of the machine: 21 kVA - Maximum load current: 36A Bcodpfx Aajugmzks Uow - Machine dimensions (width x depth x height): 3.9 m (with chip conveyor) x 1.8 x 1.8 m - Machine weight: 4500 kg

Condition: good (used), Year of construction: 1998, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, number of slots in tool magazine: 32, controller manufacturer: Okuma OSP -U 10M, spindle speed (min.): 12,000 rpm, Equipment: chip conveyor, Machine is well maintained and in good working order, tools included Bcjdpfx Aajuqi A Hj Ujw

Condition: good (used), Year of construction: 2006, Used OKUMA lathe Bcodpfx Aasv S Su So Uew - Model: LT200-M TwinStar - Year of manufacture 2006 - Includes bar magazine - Includes chip conveyor

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year of manufacture 2007 - Includes loading robot and loading carousel - Includes chip conveyor Bodjv S Svvspfx Aa Uecw - Coolant tank - Available immediately

Condition: ready for operation (used), Year of construction: 2011, Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 22 kW Movement X-Axis Movement 260 mm Z-Axis Movement 1010 mm Y-Axis Movement 120 mm Technical Specification Driven Tools yes Bsdpfxex Imqfo Aa Ujcw This 3-axis Okuma LB 3000 EX turn-mill centre was manufactured in 2011. It features a maximum turning diameter of 340 mm, a turning length of 950 mm, and a spindle speed up to 5,000 rpm. The machine includes a 12-position tool turret and supports driven tool speeds up to 6,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma LB 3000 EX machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2006, operating hours: 21,437 h, functionality: fully functional, machine/vehicle number: 122574, Controller: OSP P200 L  Remarkably few spindle hours.    Max. turning diameter ø 720mm  2.000 mm distance between spindles  Spindle speed 3.500 rpm  Spindle power 30 kW  Sub-spindle; spindle speed 3.800 rpm  Spindle power 22 kW  Spindle speed aangedr. Ger 5.000 rpm  Spindle power aangedr. Ger. 22 kW  Bcjdpfx Aaeurfz Ie Uew Number ger. Under 12 Turret  Upper mill spindle HSK100 ATC 32 HSK 100   Y-axis 250 (+125 / 1-125) mm  Floor space: 6150 x 3073  

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 0537, CNC: OSP-U100L Bedpfx Aasxlta Ej Ujcw X-axis: 1050 mm Y-axis: 560 mm Z-axis: 460 mm Table size: 1300 x 560 mm Number of tool pockets: 32 Spindle taper: BT50 Max spindle speed: 12,000 rpm Spindle motor power: 15 kW Machine dimensions: H=3200 x W=3000 x L=3400 mm Machine weight: 8,000 kg.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller: OSP-100L, IGF Turning length: 200 mm Turning diameter: 280 mm Sloping bed: No Spindle bore: 62 mm Bsdpfx Aajwufc Tj Uecw Turret head: Yes, 12 positions VDI 40 Travel X-axis: 210+845 mm Travel Z-axis: 360 mm Swing over bed: 320 mm Spindle speed: 40-400/min Main motor power: 15 kW X-axis rapid feed: 60 m/min Z-axis rapid feed: 30 m/min Machine weight: 6000 kg

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8356, Offer Number: M08L/8356 Machinetype: 4 die - 4 blow transfer header Bodowi S A Aopfx Aa Uecw Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: AF1513-4 Constr. year: 1988 diameter range: 7-15 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 10-160 mm shaft length under head: 15-130 mm output - pieces/min: 130 press power: 150 to Location: In our warehouse

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8328, Offer Number: M08L/8328 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Bodpfxjwi S Ais Aa Uscw Type: RH60 Constr. year: 1988 diameter range: 8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Location: In our warehouse