Used Okuma Lt 10 M for sale (235)

Condition: used, Okuma LB400 Kdjdpfx Aey Apq Rjmpok

Condition: used, Okuma LB45 Kodpfx Asy Apqqsmpjdk

Condition: used, functionality: fully functional, The machine has not been in operation for about one year. It is not connected to the power supply. The machine is available for inspection upon request. – CNC control: OSP 5000L-G CNC system (German language) – Data transmission: RS232 – Tool turret: 12-position BOLT ON type – Chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – Non-through spindle Kdsdpoyy Upaofx Ampek – Spindle bore diameter: 75 mm (at a depth of 70 mm, measured from the face of the chuck and without jaws) – Spindle bore diameter: 28 mm (at a depth of 200 mm, measured from the face of the chuck and without jaws) – X axis travel: 400 x 0.001 mm – Z axis travel: 500 x 0.001 mm – XZ cutting speed: 0.01-1000 mm/rev – XZ feed rate: 12,000 mm/min – Power supply: 3 x 400V – Machine rated power: 21 kVA – Maximum load current: 36A – Machine dimensions (width x depth x height): 2.9 m (3.9 m with chip conveyor) x 1.8 m x 1.72 m – Machine weight: 4500 kg

Condition: used, OKUMA LB 2000 EX is a CNC turning lathe designed for precision, high accuracy and reliability. Capacities: spindle hole 62 mm; max turning length 300 mm; max turning diameter 430 mm; travels Z 350 mm, X 260 mm. Specs: rapid traverse Z 30 m/min, X 25 m/min; stepless spindle 50–6000 t/min; power 50 Hz 3x 400 V; weight ≈3250 kg; dimensions L1900×W1750×H1850 mm. Equipment: 12-position turret. Capable of tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, machine tools. Kdodpsyxnxfsfx Ampok

Condition: good (used), Parts shown by hand not come. Kdsdpsyb R Erefx Ampjk

Condition: excellent (used), Travels: X-axis: 155 mm Z-axis: 320 mm Ksdpsyvy Utefx Ampedk Swing diameter over bed: 450 mm Swing diameter over carriage (slide): 350 mm Maximum turning diameter: 270 mm Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Tool turret: 12 stations Dimensions (L x H x W): 2200 x 1635 x 1670 mm Weight: 3800 kg

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, type of input current: three-phase, We are offering this ready-to-use Okuma LB15 CNC lathe, year of manufacture 1989. Noted defects: Kdjdpfx Amjyw Hniopok The seal on the Plexiglas door should be replaced over time. The machine is still in operation and can therefore be inspected and tested on site. Manufacturer: Okuma Model: LB15 Year of manufacture: 1989 Mains voltage: 380 V Number of phases: 3 Rated power: 21 kVA Frequency: 50 Hz Total rated current: 36 A Maximum motor current: 28 A Breaking capacity: 7.5 kA Circuit diagram no.: W5000-118-068 Serial number: 5813 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1980, Machining center Kedpsyycv Iefx Ampodk

Condition: used, OSP GRAPHIC PANEL 5000 E0105-800-027 The parts were removed from production facilities that were in operation until they were decommissioned. Condition: used (functional) Kedpjyn R S Eofx Ampedk

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details. • Control: OSP P 300LA • Spindle: ASA 6" nose (bore 80 mm, without drawbar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm ; C-axis rotation 360° (0.001° increment) • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Tailstock: CM5; 500 kgf thrust; rotating tip • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min Ksdpfx Amjyq Ngmopsdk • Tool presetting: Manual • Programming: Conversational IGF

Condition: ready for operation (used), Year of construction: 2005, number of axes: 2, This Okuma LVT 300 was manufactured in 2005. It features a stable, precise design with recent upgrades including a new SMW clamping cylinder and chuck in 2020, and a completely overhauled Z-axis with new guideways and spindle. Additional features include an EWAB conveyor for automated parts logistics and extensive tool holders. Consider the opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. • 2020: SMW clamping cylinder replaced • 2020: SMW chuck replaced • Z-axis completely overhauled: new guideways, new spindle • Stable, precise Okuma design Additional equipment • EWAB conveyor for automated parts logistics • Original Mayfran chip conveyor (replaced in 2022) • Many jaws included Kdodpfx Amoynbdrspjk • Extensive tool holders included

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Kjdpfxexzgkio Ampodk Coolant System

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Kjdexzi D Sepfx Ampodk Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: used, Year of construction: 2008, 2008 Okuma LB3000 EX CNC Lathe with Driven Tooling and Okuma OSP-P200L Control Max. turning ø340mm. Max. turning length: 1,000mm. Swing over bed: 580mm. Swing over carriage: 470mm. Spindle bore: ø80mm. Spindle capacity: ø120mm. Spindle speed: 45–5,000 rpm Z-axis: 1,065 mm. Y-axis: 260mm. Turret: 12-station (all driven tooling). Driven tool speed: 45–6,000 rpm. C-axis: 360° indexing. Tailstock: MT5. Spindle motor power: 22 kW. S/No. 141960 (2008) Kdsdpfxsy Dr I Ij Ampjk Machine weight: 6,150 kg. Overall dimensions (L x W x H): 3,500 x 1,900 x 2,000mm. Includes swarf conveyor: Approx. 4,700 x 600 x 1,500mm

Year of construction: 2022, condition: excellent (used), Machine Specifications​ Imperial Metric CNC Control Yes Control Type OSP-P300LA-e # of Axes 2 Swing 20.47" Turning Diameter 16.14" Center Distance 43.31" Chuck Size 10" Bar Capacity 3.15" X-Axis Travel 9.05" Z-Axis Travel 45.04" Spindle Nose A2-8 Spindle Speed 3,000 rpm Main Motor 20 HP Kedpfxeymq Uke Ampsdk Turret Capacity 12 Tailstock (Yes/No) Yes

Condition: used, Year of construction: 2022, machine/vehicle number: L2E0253, CNC lathe Kjdpfxoy Axr Rj Ampedk

Condition: good (used), Year of construction: 1997, Technically in good condition and functional. Year of manufacture 1997. Kdjdpjwn Dbnofx Ampjk Max. turning diameter 250 mm. Max. diameter over bed 530 mm. Max. turning length 500 mm. Length x Width x Height approx. 3315 mm, 1895 mm, 1900 mm. Machine weight approx. 6 tons.

Condition: good (used), Year of construction: 1992, operating hours: 30,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP5020M, total height: 2,700 mm, total length: 2,500 mm, total width: 2,500 mm, rotational speed (max.): 8,000 rpm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 10,000 h, coolant supply: 5 bar, number of slots in tool magazine: 18, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC Milling Machine Okuma VR40 Year of manufacture: approx. 1992 3 axes, X = 560 mm, Y = 450 mm, Z = 450 mm travel. Ksdeyha R Rjpfx Ampsdk Spindle speed: 8,000 rpm, SK40 Spindle hours: approx. 10,000 h Coolant pump with approx. 5 bar coolant pressure Coolant with six nozzles around the spindle Tool magazine with 18 stations Various tool holders with assorted tools The machine originally operated in a sheltered workshop and has also only been used occasionally by us. It is in very good condition, and both the axes and the spindle run quietly and smoothly. Accuracy is very good. The machine is available for inspection and demonstration under power at our facility. It is sold with three machine vises and all accessories shown in the photos. Complete documentation is available. Two tool stations are defective as the plastic grippers are broken. They can be replaced with new grippers. Normally, the machine has 20 tool stations. This has never been an issue for us over the years.

Condition: good (used), Year of construction: 1987, operating hours: 25,000 h, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 10 rpm, spindle motor power: 22,000 W, total length: 4,510 mm, total width: 2,370 mm, quill stroke: 150 mm, overall weight: 9,500 kg, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Well-maintained LC40 for sale. The machine is powered and available for inspection. 12-position turret. Includes: 2 pcs. 3-jaw chucks, 240/330mm, various tools and accessories (see pictures), measuring probe, Mayfran chip conveyor. Kdjdpfx Ameyvulgjpsk

Condition: used, Year of construction: 1995, turning diameter 150 mm turning length 1250 mm control OSP 7000 L Kjdpfx Ameyi Hwtjpedk total power requirement 37 kW weight of the machine ca. 8500 t

Condition: not inspected (used), Year of construction: 1989, We are offering, as part of an insolvency liquidation: 2 x CNC lathes (1 x sub-spindle, 1 x lower turret), used + Bar feeder + Accessories 1. CNC Lathe with Sub-Spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC Lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T Bar feeder HYDROBAR - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 collets - Approx. 40 sets of jaws - Various tool holders + tools - Documentation The machines are untested, but were in operation until the end. The machines have been dismantled and the price includes loading. Kdodpfox Ed A Dox Ampjk

Condition: ready for operation (used), A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible. Kjdpfsyttwzjx Ampodk

Condition: repair required (used), Year of construction: 2013, operating hours: 11,000 h, functionality: limited functionality, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 68 mm, spindle speed (max.): 3,800 rpm, overall weight: 6,500 kg, chuck outer diameter: 250 mm, The machine has a crack in the turret housing and in the cross-slide. Although everything is operational, due to this damage it is better suited as a source for spare parts. All attachments, servomotors, coolant pump, control unit, chip conveyor, etc. are in impeccable condition. Ksdpfx Ajynf Nfempedk

Condition: used, Year of construction: 2014, OKUMA - LB3000 EXII - 2014 - control system OSP-P300L CNC with 15" color touch screen - Power on time: 65,458 h - as of 18.03.2026 NC time in operation: 36,054 h - spindle rotation time: 19,533 h - time in cut 16,582 h Kodpjyzkn Uefx Ampedk - power consumption 33.1 kVA Technical data - max. rotating diameter 480 mm - max. machined diameter 340 mm - max. turning length 785 mm - collet + 10“ hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) - 1x hard jaws (Schunk SHB-J 100) - hydraulic through-cylinder SS 1770, draw tube Main spindle - spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor - speed ​​range 45 - 5,000 rpm - 22 kW/15 kW - continuously controlled C-axis, 3600 with 0.001° increments Sub-spindle - speed ​​range 50 - 6,000 rpm - 11 kW/7.5 kW - spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor - continuously controlled C-axis, 360° with 0.001° increments - collet + 6“ hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) - hydraulic through-cylinder SS1243, draw tube - travel of the secondary spindle - NC axis W stroke for W450: 595mm - spring-loaded piece ejector from the counter spindle - overload monitoring of the W axis (drive torque) Clamping of the center (tailstock) in the secondary spindle Turret head - number of tool positions 12, fixed and driven BMT60 (not VDI) - tool clamping in. 25 x 25 mm - tool clamping out. dia. 40 mm Driven tools - drive power 7.1/4.1 kW - speed ​​range 45 – 6,000 min-1 Travel speeds - rapid traverse in X and Z axes 25/30 m/min. - rapid traverse in C axis 200 rpm. Travels - X axis 260 mm - Z axis 510 mm - Y axis 115 mm (+70 mm / -45 mm) Machine data - width 3330 mm – without feeder and conveyor - depth 1800 mm - height 2250 mm - machine weight 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E set containing: - coordinate transformation function - profile generation function - advanced One Touch IGF - 3D machining process simulation - machining time overrun control - load monitoring (spindle, feed axes) - NC operation monitoring (including piece counting) - cycle time reduction function - Hi-Cut Pro function - spindle speed control function - high-pressure coolant, max. 20 bar, max. 50l/min - ILS material feeder type MUK 7012, with bar magazine 6-70 mm/1250 mm, year 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn - FILTERMIST FX4002 extraction Machine equipment: - collet holder: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) - collet dia.(mm): 6-33, 34-36, 38-42, 44-46, 48, 50-51, 53, 55, 57, 60, 64-65 - collet with groove dia.(mm) 55-60-65 - collet holder: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the secondary spindle) - collets dia.(mm): 6-28, 30-32, 34-36, 39-41 Holders: - axial holder - 5x - knife holder - 5x - holder on the blade - 2X - front double-sided chaser - 3X - transverse chaser - 3X - reducing insert tube (production from the meter) - reduction - silon dia.(mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52

Condition: good (used), Year of construction: 2001, CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC lathe with robotized loading Description: two-axis X-Z lathe for short workpieces and with a robotized workpiece magazine Kdsdpjk Hz Iwefx Ampjk X-AXIS: 180 mm Z-AXIS: 325 mm Spindl: 4500 1/min Coolant system and chip conveyor