Used Okuma Engine Lathe for sale (167)

Condition: excellent (used), Year of construction: 2011, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Iiodpjtdg Evofx Aacoh Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.

Year of construction: 1999, condition: good (used), turning diameter 580 mm Isdeiicllspfx Aacoih turning length1.500 mm X/Z 568/1660 mm Y-axis C-axis spindle 3.200 min-1 driven tools 3.000 min-1

Condition: ready for operation (used), Year of construction: 2005, operating hours: 62,500 h, functionality: fully functional, Control: OSP100L Year of manufacture: 2005 Operating hours: 62,477 h Spindle hours: 8,169 h Number of spindles: 2 C-axis on main and sub spindle Number of turrets: 1 Milling spindle: 1 Turret stations: 12-position, VDI40 Y-axis Iijdpfowww Imjx Aacjh Tool holders on milling spindle: HSK63 Tool magazine: 40-position Chuck on main and sub spindle Tool package: 30x HSK holders, 6 pcs VDI 40 holders Parts feeder with safety fence and 40 tool holders

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, rapid traverse Z-axis: 16 m/min, controller model: OKUMA-OSP-HMI, table width: 850 mm, table length: 2,200 mm, table load: 2,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, spindle nose: BT 50, number of spindles: 36, number of slots in tool magazine: 36, tool length: 400 mm, tool diameter: 120 mm, tool weight: 20 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Iedeu Dinkepfx Aaceih

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 0316, travel distance X-axis: 1,000 mm, Equipment: chip conveyor, Technical information - Okuma MC-600H General information Width: 4358 mm Depth: 12141 mm Height: 3310 mm Machine weight: 17700 kg Brand: OKUMA Model: OSP 5020M Main drive Number of spindles: 1 Speed frequency of spindle: 5000 1/min Movement X-AXIS Movement: 1000 mm Y-AXIS Movement: 800 mm Z-AXIS Movement: 750 mm Tools Iiedswaw S Dopfx Aacoh Maximum weight: 25 kg Maximum tool diameter: ISO 50 MM Maximum tool length: 450 mm Media Main electrical connection: 380 V / 50 Hz / 3 P Power consumption: 43 kVA Swarf conveyor: Yes

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Iodpfx Aaotqu U Tecsih Shaft Length Under head: 260 mm Extrusion machine Trimming machine

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand OKUMA Isdpfx Aaswt Uvmocsih Additional Equipment Spindle upgrade for 50000 RPM / Oil mist extraction unit Height: 2946 mm / Floor Space (W × D): 2160 mm × 2810 mm Weight: 7700 kg This 5-axis Okuma GENOS M460V-5AX was manufactured in 2018, featuring a robust vertical machining center design. It boasts a spindle speed of 15,000 RPM, a table size of Ø400 mm, and a maximum load capacity of 300 kg. The machine includes a high-capacity 32-tool automatic changer and advanced feed rates for precision. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Isdpfx Asu U E Avoacjih Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: like new (used), Year of construction: 2023, operating hours: 213 h, functionality: fully functional, OSP-P300SA control system with LCD screen Max. turning diameter 630 mm Max. turning length 900 mm X travel 580 mm (+480 / -20 mm) Y travel 160 mm (+80 / -80 mm) Z travel 935 mm Spindle end A2-8 Spindle bore D80 mm Main spindle speed 50 - 5000 rpm C axis 360° (0.001 degrees) B axis 225° (-30° / +195°; 0.001° increment) Power of driven tools (5 min/cont.) VAC 11/7.5 kW Milling spindle speed 50-6,000 rpm Milling spindle torque (5 min/cont.) 65.7 / 44.8 Nm HAS-A63 chuck Number of tools: 40 Motor: 15/11 kW Feed range: 0.001 – 1,000 mm/rev Rapid traverse (X) 40 m/min Rapid traverse (Z) 40 m/min Rapid traverse (Y) 26 m/min Tailstock travel: 1,000 mm Tailstock taper: MT5 Power requirement: Dimensions (L x W x H) = 4,035 x 2,257 x 2,587 mm Weight: 10,000 kg Features, accessories - Internal coolant supply: 20 bar - Kitagawa B-212A8 12" chuck - NC tailstock - B-axis indexing in 0.001 degrees - Coolant supply through the milling spindle - Dual foot pedal Iijdpfswrr Nhox Aacjh - Y-axis travel: 160 mm (+80 / -80 mm) - Hydraulic Device - Thermo-Friendly Concept - H1 TAS-S and TAS-C - CAS - Collision Avoidance System - *10 dB Coordinate Measurement (1 set) - Control Software: * Coordinate Transformation (1 set) * Profile Generation (1 set) * Coordinate Calculation (1 set) * Coordinate Change, Rotation, and Copy (1 set) * Realistic 3D Simulation (1 set) * Cycle Time Monitoring (1 set) * Load Monitoring (Main Spindle, Slide) (1 set) * Program Run Monitoring (1 set) * 2-Color Signal Lamps (1 set) Chip conveyor Coolant system Machine feet Documentation The machine is being sold due to company redundancy. It's in mint condition. It's only been in use for approximately 213 hours.

Condition: excellent (used), We offer 4 pieces of CNC turning centers by OKUMA, model LVT400. Machines are in very good technical condition and ready for immediate operation. Perfect for precise machining of medium-sized parts. 🔧 Technical specifications: • Max. turning diameter: 280 mm • Swing diameter: 320 mm • Max. turning height: 200 mm • Max. part diameter for table pallet: 160 mm • Rapid traverse: o X-axis: 60 m/min o Z-axis: 30 m/min • Spindle speed range: 40 – 4000 rpm • Drive power (40 / 100 % DC): 22 / 15 kW Isdpfxown Ra Ro Aacsih • Number of tool positions: 12 (VDI 40) • Live tools: No

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 107963, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller model: OSP U100, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Table Max. workpiece dimensions: 1,300 x 560 mm Distance from table surface to spindle nose: 150 – 610 mm Max. table load: 900 kg Iiodpewh Tfvofx Aacjh Spindle Spindle speed: 15,000 rpm Spindle power: 22 / 18.5 kW Cooling through spindle: 20 bar Feed rates Rapid traverse X/Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Working feed X/Y/Z-axis: 32 m/min Tool magazine Tool capacity: 20 tools Tool holder: BT 40 Tool selection: Memory Random MACHINE DETAILS Footprint: 2,510 x 3,100 mm Machine height: 2,476 mm Machine weight: 7,500 kg EQUIPMENT - Chip conveyor

Condition: used, Year of construction: 1986, operating hours: 10,839 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 1,000 kg, total height: 2,945 mm, total length: 4,013 mm, total width: 3,790 mm, table width: 510 mm, table length: 1,300 mm, table load: 1,000 kg, rotational speed (min.): 30 rpm, overall weight: 8,200 kg, spindle speed (min.): 4,000 rpm, number of slots in tool magazine: 20, tool length: 400 mm, tool diameter: 230 mm, tool weight: 15,000 g, Equipment: rotational speed infinitely variable, For sale production cell 2 OKUMA CNC milling machines with automatic tool changing. . Machines have full documentation. Machines were used for making spare parts for CNC machines. Highly rigid machines with spindles with mechanical gear ratio the machine itself selects the gear depending on the selected speed (4 gears). The larger MC-5VA machine has IGF dialog programming (full documentation) also has M-codes for the user - in our case they were used to work with indexed 4th and 5th axes. Machines operating used with a large number of tools Comes with a well-equipped Lista brand tool cabinet, a BT50 toolholder cart and a sturdy workbench with drawers. Iiodpfju Atn Ssx Aaceh Includes 2 BIG-Kaiser mulliplicators. 4 BIG-Kaiser boring bars with cooling through the tool. Quite a few milling heads including large ones over fi 200. A large set of branded EPB toolholders. Spare bearings for the main spindle. Lots of spare parts.

Year of construction: 2018, condition: ready for operation (used), Additional Equipment Spindle Speed (Motorized Tool Spindle): 5000 rpm Ijdjwttuhopfx Aacsih This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2002, Offered here is a 9-Axis-CNC Turning Center of the manufacturer Okuma. The machine is in a good condition and can be inspected by prior appointment. Technical Specs: Iiodpfxoq Rf Ubj Aacoh

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 800 mm, feed length Z-axis: 1,400 mm, workpiece weight (max.): 7,000 kg, total length: 1,400 mm, 5-axis Vertical Lathe Multitasking machine Isdpfsvwk Hdjx Aacjih OKUMA VTM-200YB YR2009 Fanuc-18iTB Max work dia: 2,000mm swing: 2,400mm Max work length: 1,400mm Weight: 7,000kg X:1,600 Z:1,400 Y:+-800mm B:90degree Curvic 5degree C:0.001degree

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2257 Measurements depth 4035 Measurements height 2538 Machine weight 10000 Control Unit Brand OKUMA Model OKUMA OSP-P300SA Movement X-Axis Movement 580 mm (+480/-20 mm) Y-Axis Movement 160 mm (+80/-80 mm) Z-Axis Movement 935 mm B-Axis Movement 225° (-30°/+195°; 0.001° increments)225° (-30°/+195°; 0.001° increments) C-Axis Movement 360° (0.001° increments) Tools Iijdewmg U Ijpfx Aacsh Slots in storage 40 Media Chip conveyor Yes Additional Equipment Thermal Stability Concept (TAS-S & TAS-C) Full enclosure and LED workspace lighting Hydraulic power unit for basic machine operations 3D Simulation and collision avoidance (CAS) This 5-axis Okuma Multus B300 II turn-mill centre was manufactured in 2023, featuring a max turning diameter of 630 mm and a machining length of 900 mm. It includes a collision avoidance system, thermal stability, and an easy-to-use OSP-P300SA controller with a 15” touch screen. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2017, turning length: 3,000 mm, turning diameter: 1,050 mm, spindle speed (max.): 1,500 rpm, chuck outer diameter: 375 mm, Multitasking Machine OKUMA MULTUS B750 C3000 YEAR2017 Iodpewi Ezrsfx Aacjih OSP-P300SA 15" chuck Max Machining dia:1050mm Length:3000mm