Used Notified Aluminium Shredder 750 Kw for sale (39,013)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Benefits: + Special rotor with reduced knife protrusion, suitable for hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Rate depends on screen size and material. Significantly higher throughput with smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or according to agreement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Suction connection Ø 200 mm Feed opening: 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: plant color may differ Weight: 1920 kg Standard scope of delivery includes: - Control cabinet with PLC control - Automatic star-delta start - High-speed hydraulics - Auto shut-off when rotor is idle - Speed 70–90 rpm for high throughput - Cycle control to prevent idle times Nwjdpex Af Rdefx Ad Neb - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at an additional cost: - Increase shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synced with shredder) - Enlarged hopper attachment 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Feed must be free from metals and mineral contaminants. Tool damage and/or increased wear may result otherwise.

Condition: new, Year of construction: 2026, Production time appr. 4 months Nedpfochqxxjx Ad Nowb Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), mileage: 706,000 km, power: 220 kW (299.12 HP), first registration: 08/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 6,100 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 10,300 mm, total width: 2,550 mm, loading space length: 8,250 mm, loading space width: 2,450 mm, loading space height: 2,550 mm, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, differential lock, electric window regulation, power assisted steering, power mirror, second fuel tank, tail-lift, = Further options and accessories = - Aluminum fuel tank - Differential lock - Speed limiter - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Reversing camera - Disc brakes - Sun visor - Toolbox - Central lubrication = Further information = Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Front axle: Max. axle load: 8,000 kg; Tire tread left: 70%; Tire tread right: 70%; Suspension: leaf springs Rear axle: Twin tires; Differential lock; Max. axle load: 11,500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Suspension: air suspension Nwsdpfx Adeyaqkxj Neb Weights Curb weight: 10,155 kg Payload: 10,345 kg Gross vehicle weight (GVW): 20,500 kg Maintenance, history and condition General inspection (APK): valid until 06/2026 Technical condition: very good Visual condition: very good Further information Please contact Andre, Henri, or Andre for more information.

Condition: used, Year of construction: 2017, Serial no. 141342-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum daylight 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, screw L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection unit/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2020, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564 Njdpeyc Symefx Ad Newb This item is part of an online auction. Sale is subject to approval by the client.

Condition: used, Year of construction: 2017, Ser.-No. 140228-100, Control system type Unilog B8, clamping force 1,800 kN, tie bar clearance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, platen gap max. 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 2 hydraulic core pulls, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 17,844 Nwodoyc Staspfx Ad Njb This item is part of an online auction. The sale is subject to the approval of the seller.

Condition: used, Year of construction: 2017, Serial no. 138522-100, control system type Unilog B8, clamping force 1,100 kN, tie bar clearance 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, minimum mould size 296 x 296 mm, injection unit type 750, screw diameter 35 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 5,200 kg, operating hours 36,180. This item is part of an online auction. Final acceptance subject to the approval of the seller. Nwjdpfx Aoyc Snked Nob

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. This item is part of an online auction. The sale is subject to the approval of the seller. Nedpfxoyc Sh Ds Ad Njwb

Year of construction: 2014, condition: ready for operation (used), number of axes: 2, This Kocevar & Sons R-94-K0LQ-320/750-DD160 was manufactured in 2014. It features a rotary table with NC-controlled indexing and direct drive, motorized spindles for operations like drilling and milling, and an automatic loading/unloading system. Ideal for high-volume serial production of automotive or industrial components. For more information about this machine, please reach out to us. • Axis configuration: • Rotary indexing axis (C-axis/table) • Linear axes per machining unit: typically X/Z (some units may include Y) • Total axis count: configuration-dependent (usually 6+ overall) • Rotary table: • Indexing type: NC-controlled • Indexing accuracy: high-precision (seconds range) • Number of stations: layout-dependent (e.g., 6–12) • Table drive: direct drive (DD160) • Machining units: • Operations: drilling, tapping, milling, boring • Spindle type: motorized spindles • Spindle speed: high-speed production range (application-specific) • Spindle orientation: radial/axial depending on station • Workpiece capacity: • Max workpiece diameter: approx. 320 mm • Max machining length: approx. 750 mm • Control system: • CNC: Siemens / Fanuc (configuration-dependent) • PLC-based automation • Machine features: • Integrated clamping systems • Cycle-time optimized for series production • Application: • High-volume serial production • Automotive / industrial components • Dedicated part machining (not flexible like a machining center) Nodpfeybbttox Ad Newb Additional equipment • Automatic loading/unloading (automation)

Condition: used, mileage: 85,741 km, power: 160 kW (217.54 HP), first registration: 09/2022, fuel type: hybrid, next inspection (TÜV): 09/2027, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * Partial leather trim * Navigation system * Parking distance control (PDC), front and rear with reversing camera * Automatic climate control * Sports leather multifunction steering wheel with paddle shifters * 18" alloy wheels * DAB radio * Heated seats * 10.25" digital instrument cluster * Active lane keep assist * Rain sensor * 8-speed automatic transmission * Active park assist * Traffic sign recognition * MBUX multimedia system (digital multimedia system) * 4x electric windows * Electrically adjustable and heated exterior mirrors * Lane Departure Assist (LDA) * Armrest with storage compartment * Rear bench seat, split-folding * Child safety seat anchorage system "ISOFIX" * Light and visibility package * Seat comfort package * Connectivity package * Lumbar support * Light sensor * USB port * Fog lights * Comfort suspension * Smartphone integration package with Apple CarPlay and Android Auto * Swiveling tow bar * Business package * Driver assistance system: Agility Select / Dynamic Select (driving mode selector) * High-end infotainment package * Charging cable with Schuko plug * Start/Stop function * Charging cable SCHUKO CEE 7/7 (TYPE E/F) 4M * Charging cable MODE3 (TYPE 2, 3X16A, 11KW) 4M * Central locking with remote control and 2 keys * 1st owner * Full service history, serviced exclusively at Mercedes-Benz * Last service at 73,236 km on 22.05.2025 Vehicle number: 133 WhatsApp No.: Further vehicle offers can be found at: ONLINE CONSULTATION / ONLINE VIEWING / ONLINE PURCHASE AGREEMENT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY FOR AN EXTRA CHARGE Delivery service available upon request. Foreign customers have the possibility to make a partial payment and pick up the vehicle at a later date. NET EXPORT possible (for vehicles with deductible VAT). ---- We are happy to handle your vehicle registration (Düsseldorf), as well as the procurement of customs/export or temporary registration plates (5 days). Complete export processing possible (export declaration). ----Vehicles with TÜV used car inspection report available upon request. ----On request, we are pleased to offer our "GPG" used car warranty with customized solutions tailored to you and your vehicle. ----Trade-ins accepted. ----For any further questions, please feel free to contact us by phone. Opening times: Monday - Thursday 09:00 - 16:30, Friday from 9:00 - 16:00 ----Subject to changes, errors, and prior sale. Offers are non-binding. Nsdpeydgk Nefx Ad Nowb All information provided without guarantee. Vehicle descriptions explicitly do not constitute guaranteed specifications.

Condition: new, The KW 100 Folding Machine from KNUTH is a robust angle bender designed for the manual bending of flat, round, and square steel parts. It features a sturdy design that allows for screw-mounting on a workbench, allowing for infinitely variable bending stop adjustments to suit your needs. With an eccentric quick-clamp, the KW 100 streamlines operation, enabling bending angles up to 120 degrees. For enhanced precision, it includes a bending angle read-out, ensuring high repeatability. With a bending capacity of flat steel reaching 100x5 mm, this machine is ideal for repair shops and metalworking applications. The standard equipment includes various essential tools such as an angle stop, bending plates, and a bending lever. You can rely on the performance of the KW 100 when looking for a competent Folding Machine suitable for diverse bending tasks. Order online today and experience the reliability of our Folding Machines in your metalworking projects. Nodpfx Ajuxdd Nsd Newb

Year of construction: 2028, condition: excellent (used), functionality: fully functional, ELLIMETAL silo for PE granulate made of aluminium Year of manufacture: 2008 Max. capacity: 280 m³ and/or 168 tons Diameter: 4,500 mm Height: 24,000 mm Empty weight: 7,000 kg Njdpsyc Nzhsfx Ad Nswb

Condition: used, Year of construction: 2016, 2016 | Kempf 3-axle aluminium tipper semi-trailer | Used Tipper Semi-trailer 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 21000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 12 inspection points 6 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Fully functional with automatic cover. Vehicle was extremely rarely used and is in exceptionally good condition for its age. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39875 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Nwsdpfx Adjyc Ihme Nsb ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options at additional cost – see below Included: + Profile rotor for increased throughput performance We are happy to arrange a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarder and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 15 pieces, reversible multiple times Optional double knife row + €995 net Nwjdpfx Adsb Ny Eys Njb Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Automatic stop when rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-boosting incremental control of the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant Optional extras for the shredder (at additional cost): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for over 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended for shredding veneer, paper or thin materials < 3 mm) - Angled conveyor belt + €8,770 net (angle adjustable 0–60°, discharge height approx. 2,000 mm) - Automatic overbelt magnet + €5,980 net Alternatively, fixed magnetic block above the belt for manual cleaning + €990 net (for low metal contamination) - Control for conveyor and overbelt magnet + €2,750 net (start/stop synchronised with shredder); alternatively, manual start/stop for conveyors + €595 net Raw material requirements: - Moisture content (dry basis) must be below 30% - Installation temperature: temperature controlled room, at least +5°C - Metals and mineral contaminants such as sand, stones, etc., will increase wear

Condition: new, Year of construction: 2024, functionality: fully functional, Multiple load banks are directly available from stock. Contact us today if you want to rent, lease, or buy a load bank. - Load bank 100 kW, 400Vac 50Hz, CosPhi 1 (Very compact, easy to carry in a service van) - Load bank 300 kW, 400Vac 50Hz, CosPhi 1 - Load bank 500 kW, 400Vac 50Hz, CosPhi 1 - Load bank 600 kW, 400Vac 50Hz, CosPhi 1 - Load bank 700 kW, 400Vac 50Hz, CosPhi 1 - Load bank 1000 kW, 400Vac 50Hz, CosPhi 1 Nedpfx Adjr Eyyce Njwb - DC load bank with different voltages and capacities in stock, for example, 500VDC and 1000VDC, 1000 kW. If you are looking for a solution to test at different voltages, such as 440V, 690V, or medium voltages like 10kV, do not hesitate to contact us. We also offer solutions for load banks with a variable power factor (CosPhi) and load banks with a power factor of 0,8 (load bank with a CosPhi 0,8). For example, we have inductive load banks, which we could combine with resistive and load banks, including both. Most of our load banks are equipped with a switch where you can choose between internal and external power for the fans. We offer both stationary and mobile load banks. For mobile purposes, we can add forklift pockets and a robust bracket. We are looking forward to your request.

Condition: used, Year of construction: 1986, Manufacturer : OLSA Model : Speedycream 750 Year : 1986 Type: vacuum mixer Capacity: 750 Liters Total capacity: 880 Liters Nodpsx R Dmijfx Ad Njwb Minimum working capacity: 280 Liters Jacketed : 3 bars Inside tank pressure: 1 bar Slow stirring: 5.5 KW Planetary: 15-78 rpm Blade with Teflon scrapers: 5-26 rpm Satellite rapid mixer (located on the lid): 7.5 KW Homogenizing disperser: 1400 - 2800 rpm Movement speed: 5-26 rpm Temperature controller Planetary mixer speed indicator Internal vacuum indicator Planetary mixer power consumption indicator Fast stirrer power consumption indicator Planetary speed indicator Satellite speed selector Tilting axis Vacuum pump : 1,45 KW Drain valve Ø 65 mm Exterior dimensions: 2658 mm x 1420 mm x 2510 mm (3870 mm - lid open) Spare parts available (see photos) Original paper documentation available Video available in running condition

Year of construction: 1998, condition: used, Manufacturer : Lewa Model: ecodos 750 P1 Year : 1998 Type : low pressure diaphragm metering / dosing pump Nwedpfox R Atzjx Ad Njb   Max capacity : 750 L / H Operating pressure : 5 bars Min / max stroke : 10/0 mm Speed : 113 rpm   Application: sanitary/hygienic for the pharmaceutical, chemical, cosmetics and food industries. Classification: Atex (EEx) Variable speed drive Special acid coating: Stainless steel / PVC-H

Condition: used, A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Plan implantation équipements + système cip . pdf Nedpfex R Amnjx Ad Newb 1 Glatt GC 750/500 coating unit – drive motor : 1,1 kW – 380 V – 50 hz – IP 54 – Ex - ventilateur d'entrée d'air : 1000 m3/h - 6860 trs/min - 2’003 Pa - Max 80°C - 1,1 kW - IP 54 – air inlet fan : 1000 m3/h – 6860 rpm – 2’003 Pa – Max 80°C – 1,1 kW – IP 54 – air outlet fan: 1200 m3/h – 2900 rpm – 1’030 Pa – Max 80°C – 7,5 kW – IP 55 – Drum speed: 2 – 18 rpm – Sold with two perforated drums ⌀500mm and ⌀750 mm – Adaptable 2-head spray arm + Peristaltic pump– Spare parts, seals, … - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Extraction air volume: 1200 m3 / h Extraction air volume: 1200 m3 / h 1 Wanson CD-36 steam boiler - Power: 36 kW – Steam output: 48 kg/h – Operating pressure: 5 bar – Temperature : 159°C – Water volume: 10 L 1 Cleaning system (CIP) Used for easy cleaning and maintenance of the machine.

Condition: excellent (used), ELIN electric motor, 3-phase, 55 kW, water-cooled Nwsdpfjx Uqwvex Ad Nob

Condition: excellent (used), EMK electric motor 45 kW Type KAE2G225M-4B35E3K Nwedex Uqwispfx Ad Neb

Condition: excellent (used), ELIN EBG 3-phase motor, water-cooled electric motor, 75 kW Njdpjx Uqu Isfx Ad Njwb

Condition: excellent (used), Loher electric motor 37 kW Nodsx Uquhopfx Ad Nswb Type ANGA-2255E-04D

Condition: excellent (used), Year of construction: 2019, operating hours: 5,500 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840 D, table width: 410 mm, table length: 900 mm, table load: 350 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, Vertical machining center Spinner VC 750 from training facility Year of manufacture: 2019 Control: Sinumerik 840D Technical specifications Spindle speed: 10 - 12,000 rpm Drive power: 11/17 kW Tool holder: SK 40 Number of magazine positions: 24 Table size: 900 x 410 mm Travel distances: X-axis: 750 mm Nedpfxjya H Tcs Ad Nswb Y-axis: 460 mm Z-axis: 460 mm Equipment: Electronic handwheel Coolant system (KSS) Chip conveyor Prepared for 3D probe – receiver available

Year of construction: 2007, operating hours: 8,500 h, condition: excellent (used), functionality: fully functional, Vertical BAZ Emco FAMUP MCX 750-1200 with IKZ 40bar year of construction: 2007 Control: Fanuc 21i Running hours: 8.500h Chip Blaster high pressure system - Max. Speed 8.000 min. - Tool magazine with 24 magazine places (ISO 40), - Tool magazine ISO 40 - 24 tightening bolts ISO 40 - Standard painting: red - gray - black - Spindle is prepared for high pressure cooling (connection A) - Tapping without compensating chuck - Central lubrication system - Chip removal from the housing via flushing device - Flushing gun for cleaning of working area, clamping devices, parts - Coolant device with 3 adjustable nozzles - Coolant tank 500 l - Spindle blowing device for cleaning the fixture during tool change - Illumination of the working area by halogen lamp 24 V - Two-color alarm lamp TECHNICAL DATA MCX 750 axis X - longitudinal: 750 mm Nwjdpfxsh Akhks Ad Neb axis Y - transverse: 500 mm WORKING RANGE axis Z - vertical: 640 mm clamping area: 900 x 520 mm T-slots: number, width, spacing 5x18x100 mm max. table load: 400 KG TABLE distance table surface - floor mm 925 speed range: 50 ÷ 8.000 min spindle motor power: 13/9 KW tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive Belt drive rapid traverse X,Y,Z m/1' 24 Working feed X,Y,Z m/1' 20 AXIS DATA Axis acceleration (X,Y,Z) G 0.25 One-way positioning accuracy in total stroke range XYZ µm ± 8 One-way repeatability X, Y, Z µm ± 8 PRECISION Reversal span µm 5* Number of tool positions: 24 Tool selection random Max. Tool diameter with (without) adjacent tools ø 75 (150) Max. Tool length: 250 mm Max. tool weight: 6 KG TOOL CHANGE Tool change time (tool/tool): 1.5". Connected load: 20 KVA dimensions LxDxH: 2,650x2,400x3,050m weight: 5,5to

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 15,907 h, Table length: 3000 mm Table width: 1500 mm Laser power in watts: 3000 Control unit: B&R APC 910 Connected load: 33 kVA Approx. machine weight: 7,800 kg Control unit ON counter: 2,472 h Operating hours: 15,907 h Laser ON counter: 32,927 h Laser ON: 7,790 h Special Edition Equipment - Integrated solid-state laser TruDisk 3001 with 1 LLK output - Fully automated pallet changer (with light barrier) Standard Machine Equipment - Enclosed machine frame with integrated components - Motion unit for ultra-precise machining - Drives with maintenance-free three-phase servo motors - Sheet support accessible from both sides - Enclosed beam guidance via laser light cable (LLK) - Fully integrated cooling unit for laser and machine - Integrated control cabinet - Accompanying extraction system - Slag drawers - 19" touch color display - Power supply TruDisk via machine - Work area lighting - Positioning laser diode - PierceLine - FocusLine - NitroLine - Transport and assembly device - Copper cutting kit (includes cutting data) - Brass cutting kit (includes cutting data) TRUMPF Laser - LLK as per standard layout (laser directly beside machine) - Excitation via pump diodes - Laser power control - Laser logbook function Cutting Head - Universal cutting unit - Single-head cutting strategy - Protective glass for lens protection - ControlLine: height regulation and detection of sheet metal edges Nsdpfx Adeyffmxo Nswb Control System - Simple drawing module - Easy workshop programming - Fast repeat production - Control B&R APC 910 - Integrated TRUMPF technology data - Automatic shut-off - Programmable cutting gas/pressure selection - ContourLine - FastLine - Microweld - Teleservice via internet - Microjoint - operation via control panel - Adjustable dynamics Data Transfer - RJ45 network connection and USB interface Safety - CE marking - Compact dust extraction unit - Machine enclosure with certified viewing windows - Motorized front door and rear opening - Enclosed machine roof

Condition: good (used), Year of construction: 2018, operating hours: 1,011 h, functionality: fully functional, Shredder GROSS, Model GAZ 82 S, Year of manufacture: 2018 Technical Data: Manufacturer: GROSS Apparatebau Model: GAZ 82 S Year of manufacture: 2018 Operating hours: 1,011 Drive power: 37 kW Feed opening: 800 x 1,200 mm Hopper volume: 1 m³ Rotor diameter: 368 mm Rotor length: 800 mm Rotor speed: 60–120 rpm Extraction port diameter: 200 mm Dimensions: approx. 2,100 x 1,700 x 1,750 mm (LxWxH) Weight: approx. 2,500 kg Material: Wood, cardboard, plastic Nwsdox Uz N Ajpfx Ad Nsb Accessories: Hopper Note: The shredder is in good condition. It has been inspected and tested at our location in 28816 Stuhr. A video is available on our website or YouTube channel. Viewing, including powered demonstrations, is possible by prior arrangement at any time. Upon request, we can also perform tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of this information or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewing by appointment only. Sale is ex works with prepayment, without warranty or guarantee.