Used Nestro Ne 200 for sale (32)

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. Gkodjz R Sulspfx Acmjd The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available.

Condition: used, Year of construction: 1997, intake connection: 200mm Maximum volume flow: 3200 m³/h nominal volume flow: 2862 m³/h volume flow: Differential pressure indicator Vacuum: 2336 pa filter area: 16,8 m² Residual dust content: smaller 0,2 mg/m³ SPL: db chip bag volume: l filter regeneration: pneumatic motor power: 4 kW machine length: 2300 mm Gkedpfx Acsx Edmvsmed machine width: 900 mm machine height: 2200 mm weight: 350 kg

Condition: used, Year of construction: 2000, Used Machine Year of Manufacture: 2000 Features and Technical Specifications: - Nominal Airflow: 5,040 m³/h - Minimum airflow: 3,532 m³/h - Inlet diameter: 250 mm - Filter area: 25.23 m² - Number of collection tanks: 3 Gjdpfezuuncox Acmokd - Negative pressure: 2,600 Pa - Collection tank capacity: 480 L - Motor: 5.5 kW - Automatic filter cleaning - Filter category: H2 - CE marking: Yes Dimensions: approx. 350 x 100 x 230 cm Weight: 740 kg Availability: available shortly Storage location: Röllbach

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. Godpfjzdddysx Acmokd The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Dimensions: Length: 5.00 m Depth: 1.25 m Height: 2.42 m Weight: 1500 kg Stock number: 1143

Condition: new, Year of construction: 2024, New dust extractor Gkedpfxoy R E Uuj Acmjd Year of manufacture: 2024 Technical specifications: Certified according to BGHM H3* / CE / GS Power consumption: 2.2 kW Current draw IE2: 4.4 A Filter area: 9.5 m² Dimensions: 1575 x 910 x 2110 mm Dust bin volume: 1 x 160 l Weight: 405 kg Suction nozzle: 160 mm, right Operating air volume: 2300 m³/h Volumetric flow max/nom.: 1780/1447 Vacuum at nominal air flow: 2450 Pa Vacuum before fan at VNenn: 3160 Pa Maximum sound pressure level: 74 dB(A) Filter regeneration: pneumatic, max. 7.5 bar Operating mode: continuous operation Compressed air connection required Availability: short notice Location: Hochheim

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 41 mbar, suction capacity: 16,800 m³/h, filter area: 150 m², Central dust extraction system, wood chip extractor, dust collector, self-cleaning filter, vacuum-operated, brand NESTRO. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Suitable for all types of dry dust in various technological processes. Bag filter, self-cleaning Nestro JET 9/5/33 2E Year of manufacture: 2007 Filtration area: 150 m2 Fan power: 30 kW Godpfs Ai Sdljx Acmekd Device capacity: 16,800 m3/h Maximum vacuum: 4100 Pa Filter capacity: 22,000 m3/h Complete airlock Stock number: 1119

Condition: excellent (used), Year of construction: 2022, NESTRO dust extraction system Capacity: approx. 20,000 m³/h Filter area: 175 m² Vacuum fan: 22 kW The filter is equipped with an automatic filter bag cleaning system, an air return system, control system, and fire and explosion protection. Technical data: Manufacturer: NESTRO / Netecs Type: NFP 9/9/30 Year of manufacture: 2022 Production number: 22/6014 System capacity: approx. 20,000 m³/h Max. filter capacity: approx. 22,000 m³/h Vacuum fan: 22 kW Filter area: 175 m² Number of filter bags: 81 pcs. Bag dimensions: DN 230 × 3000 mm Max. filter vacuum: 4000 Pa Max. dust moisture: 15% Filter cleaning: automatic, vibration-based Cleaning without compressed air Filter emptying: rotary airlock Construction: galvanized sheet metal, 2 mm thick Noise level: < 80 dB(A) Filter voltage: 400 V Frequency: 50 Hz Filter weight: 3612 kg Variable frequency drive: 22 kW Equipment and safety: automatic vibration-based filter bag cleaning antistatic filter fabric, category C dry extinguishing system certified explosion-proof flaps/panels design compliant with ATEX requirements fire damper on the air return adjustable air return damper 0–100% control of fan, rotary airlock, cleaning, and safety features pressure sensor and automatic capacity adjustment via a variable frequency drive Gkodpfx Ao Af Utzscmed ladder and service platform TECHNICAL CONDITION: PERFECT!!!!

Condition: used, Throughput capacity: approx. 50-75kg/h, motor power: 5.5kW, on-site inspection is possible. Gksdpo Akd Svsfx Acmjd

Condition: excellent (used), Year of construction: 2022, operating hours: 250 h, functionality: fully functional, NSL 130-45B chipper for sale in Poland Zerspaner NSL 130-45B 45 kW Rotor Ø 352 mm Die Einwellen-Zerspaner der NSL-Baureihe zeichnen sich durch eine äußerst robuste Technik aus. Für Holzabfälle in Schreinereien und der holzverarbeitenden Industrie haben sich Zerspaner mit Einwellentechnik am Markt durchgesetzt. Die Zuverlässigkeit und die solide Technologie machen unsere Maschinen zu einer hervorragenden Wahl sowohl für die Industrie als auch für den Handwerker. Der Schneidrotor mit seinen dreh- und auswechselbaren Schneidwerkzeugen liefert eine hohe Zerkleinerungsleistung bei gleichzeitig wirtschaftlichem Energieeinsatz. Bei unseren Zerspanern wird durch eine lastabhängige Schiebersteuerung eine continuierliche Zerspanung ohne Blockaden ermöglicht. Der NESTRO-Zerspaner wird kosmet mit Schaltschrank und 5 m Kabel geliefert, der Schaltschrank ist für eine Wandmontage vorgesehen. Technische Daten: • Spannung / Frequenz: 3-phasig, 400 V / 50 Hz ±5 % • Antrieb / Leistung: 45.0 kW • Abmessung (L x B x H): 2,120 x 1,995 x 1,720 mm • Trichteröffnung: 1,300 x 1,200 mm • Trichtervolume: 1.9 m³ • Rotor Ø / Länge: 352 / 1,320 mm Gkedpfx Acjwbpcqsmed • Rotor-Drehzahl: 80 – 100 U/min • Durchsatzleistung: 1 – 4 faches Trichtervolumen pro Stunde (abhängig von Material u. Sieblochung) • Anzahl der Schneidmesser: 99 (30x30mm) • Absaugstutzen: Ø 250 mm • Gewicht: 3,800 kg

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery in new condition (in operation since 06/2024), including: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12x18m) Nextec 7705 nesting machining center Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor belt (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024), including: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquette press shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, 7.5 kW each (1 of which is new and has been in operation since 06/2024) 1x Ayen multi-spindle drilling machine, special design with 2.5m stop gauge 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) 2x electric high-lift pallet trucks Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks Cesab including initial lift (year of manufacture 2025) Various workbenches, templates, pallet racking, material carts, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Prof., etc. Godpozh Hw Aefx Acmjkd Bench drill Stürmer Festool table saw Bosch large panel miter saw on stand EUR 460,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, we would be happy to provide pictures and details of the individual items.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, volume flow: 10,550 m³/h, overall weight: 360 kg, inlet: 350 mm, extraction nozzle diameter: 350 mm, 2 pieces blue Nestro FAN Elmot motor 11KW, Inlet: 350mm, 10.550m3/h. 1 pieces gray Remb Fan Siemens motor 11Kw, Inlet: 300mm, circa.: 10.000m3/h All the fans can be tested; they are in excellent technical condition. The price is per item! Gsdpfx As Aa It Hocmjkd

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ Gjdpjzvz Tbsfx Acmekd - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, Offered is a negative-pressure filter system with return air recirculation. Filter area: 120m², air flow rate: 18000m³/h, replaced filter bags, two fans positioned in the upper part of the filter, one transport fan, one rotary valve, chain conveyor, collection hopper, inspection openings, control via a separate control cabinet with automatic start-up or manual operation, ductwork excluded from the scope of supply. Inspection possible by arrangement. Gedpfx Aj Ai Hduscmjkd

Condition: excellent (used), Year of construction: 1999, 36 filter bags dust extraction duct height: 7.5 m external dimensions of the dust extraction duct: 270 x 150 cm turbine power: 11 kW fire extinguisher Gedpfez Spuwex Acmjkd automatic hydraulic sawdust feeding system for the briquetting machine bag shaking mechanism briquetting machine motor power: 4 kW year: 1999

Condition: used, Year of construction: 2001, functionality: fully functional, filter area: 43 m², volume flow: 7,650 m³/h, negative pressure: 2,200 Pa, rotational speed (min.): 2,800 rpm, We are selling our bag filter, type Nestro NAsf5/3. The unit is available for dismantling and collection at our premises. Due to a new acquisition with integrated heat recovery, this unit is now surplus to our requirements. Godjzt Ruvjpfx Acmskd

Condition: excellent (used), Year of construction: 2013, Mode of operation: continuous operation with intermittent pauses Gsdoxup Auspfx Acmjkd Type of current: three-phase AC Frequency [Hz]: 50 Power consumption [kW]: 4 Supply voltage [V]: 3 × 400 V Number of filter bags / filter cartridges: 18 / Plitex Filter material: polyester felt 973010, dust class M, d = 160 × 1503 mm Filter area [m²]: 73.8 (4.1 m² per filter cartridge) Weight [kg]: approx. 700 Filter cleaning: compressed-air pulse cleaning Compressed air connection: standard NW7 quick coupling  – compressed air must be dry and oil-free  – Maximum pressure: 8 bar, Nominal pressure: 6 bar Compressed air consumption: approx. 360 normal litres per cleaning cycle Ambient temperature [°C]: 5–40 Maximum sound pressure level [dB(A)]: less than 70 Conveyed medium: air with solid particles Minimum operating temperature [°C]: 5 Residual dust content [mg/m³]: < 0.2 Maximum operating temperature [°C]: 45 Type of solids: salt-containing dust up to 2 mm particle size Maximum Kst value [bar·m/s]: 200

Condition: used, Year of construction: 2004, used fan year of manufacture: 2004 with electric motor, 1400 rpm, 11 kW design B 3 V-belt drive with motor tensioning rails steel impeller, forward-curved, mounted on double flange bearings Gkedpfxjz Svq Ee Acmsd housing in welded construction with suction and discharge nozzles suction diameter 250 mm availability: short notice location: Flörsheim

Condition: used, functionality: fully functional, Dust extraction nozzle for a four-sided planer Number of connections: 9 Connection diameter: 140 mm Main duct diameter: 450 mm Gkodpfx Acj Agrzlsmed This nozzle is compatible with a Weinig Hydromat planer:

Condition: good (used), Year of construction: 2014, Engine power: 4 kW Speed: 2800 U/min Voltage: 400 V Gjdpfx Aexnw Sdecmjkd Frequency: 60 Hz

Condition: good (used), Year of construction: 1994, functionality: fully functional, Nestro Dust Extraction System Gedpfx Aszhv Nnocmjkd Dust Extraction Nozzle D = 160 mm Motor power 2.2 kW Filter area approx. 11.5 m² External dimensions L x W x H approx. 1350 x 860 x 1960 mm Weight approx. 240 kg One chip collection bin / approx. 185 l Max. rated volume flow 1780 m³/h Associated negative pressure approx. 2400 PA All information is subject to change. This information was taken from a brochure.

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Gksdjzt Ipkepfx Acmjd Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, filter area: 160 m², Equipment: documentation/manual, NESTRO Extraction System Year 2022 – Modern Industrial Installation – Top Condition NESTRO Extraction Jet NFHSU 11125, 160 m² filter area, incl. 2x electric diverter valves, excl. spark extinguishing system, year 2022 Description For sale is a high-quality, modern extraction system from NESTRO Lufttechnik GmbH, built in 2022. The system comes from an industrial environment and is accordingly in a very good, well-maintained condition. Thanks to its recent year of manufacture, it offers the latest technology, high energy efficiency, and state-of-the-art control components. 👉 Ideal for joineries, woodworking, manufacturing businesses, and industrial applications where dust and chips are generated. Key Technical Data (Excerpt) Manufacturer: NESTRO Lufttechnik GmbH Year of manufacture: 2022 Duct diameter: Ø 300 mm Electric diverter valves included Motor power diverter valve: 0.12 kW Operating voltage: 400 V Frequency: 50 Hz Robust industrial design Scope of delivery - Filter plant / filter housing - Fan / negative pressure fan - Control system (incl. modern control components) - Piping and components (as per inventory) - Diverter valves - Steel structure / installation Condition ✔ Year 2022 – very modern condition ✔ The system has been in use and is proven ✔ Well-maintained overall system ✔ Inspection possible any time Special Features ✔ Very recent year of manufacture ✔ Premium manufacturer (NESTRO) ✔ Modern control technology ✔ Energy-efficient and future-proof ✔ Significantly cheaper than comparable new equipment ✔ Ideal for rapid integration into existing operations Important Notes Sale is made in the current condition Dismantling and loading by purchaser Support for dismantling can be organized upon request Sale without warranty Condition / Warranty The machine offered is sold as used equipment. The sale is under exclusion of any liability for material defects. The machine is sold as inspected and without any warranty. The seller does not guarantee functionality, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body or health, or to grossly negligent or intentional behavior by the seller. Dismantling and Transport Dismantling of the machine is the responsibility of the buyer at their own expense and risk. The buyer bears all costs and risks associated with dismantling, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest when dismantling or loading begins. Gjdpfxoywfl Hj Acmskd Other Provisions No liability is accepted for hidden defects. All information on the machine (e.g. year of manufacture, operating hours, technical data) is given to the best of our knowledge but without guarantee.

Condition: used, With bottom extraction attachment Extraction surface (W x H): 2400 x 1600 mm Airflow: 7000 m³/h Gksdpfx Acsyxm Eksmod Height: 2600 mm Depth: 800 mm Complete air supply system included (Wolf KG100 type) With drip tray Comes with control system

Condition: good (used), functionality: fully functional, For sale is a compact and mobile Nestro dust extraction system for extracting wood chips and dust from woodworking machines. The mobile design allows for flexible use of the extraction system on different machines. The system features a filter and a chip collection bag and is particularly suitable for carpentry shops, joineries, and smaller workshops. Technical data: Manufacturer: Nestro Motor power: 1.1 kW Extraction connection: Ø 140 mm Mobile design Filter unit with filter bag Separate chip collection bag Direct extraction at woodworking machines Compact design Gksdpfx Acjztau Eemed Equipment: Filter bag Chip collection bag Extraction fan Extraction nozzle Ø 140 mm Chassis with rollers Suitable for extraction, for example, on circular saws, milling machines, planing machines, and other woodworking machines – depending on the required air volume flow and extraction connection. Scope of delivery: Nestro dust extraction system Filter and chip collection bag Accessories as shown in the photos The machine can be inspected and tested under power after prior appointment. Transport is possible for an extra charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Year of construction: 2018, condition: excellent (used), Technical datas: Gjdefl Uagopfx Acmokd - Max. volume flow: 4500 m3 / h - Motor power: 2.2 kW - Speed: 1/1410 rpm - Connection: d = 450 mm