Used Mortiser for sale (244)

Condition: used, Bacci Double Mortiser with 1 Bit per Side Dsdsuqw Scjpfx Acyewd

Condition: used, Double Camam portable saw, belt-driven, with 2 horizontal spindles and 3 vertical spindles, used Dsdpfxolxurmo Acyewd

Condition: used, Door lock milling machineused, good conditionmake Haffnertype SL 100machineNo. 2269upright machinechain setdoor supportworkpiece supportpusher hole motorforend motorlubricatorsuction connection D 80/100 mmspace requirement approx. 1200 mm x 700 mm x 2000 mmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Dwjdsvwfmfspfx Acyod

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dwjdpfx Asv Hm Nmocysd Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Bacci 1-Point Oscillating Mortiser Dwedpfx Aswdfh Ujcyed

Condition: used, Camam Horizontal and vertical double mortising machine. Dwjdewt S E Espfx Acyed 2 double horizontal spindles 3 vertical spindles right side 3 vertical spindles left side

Condition: used, used, good condition, low operating hours, with accessories Dsdpfxeythcrs Acyewd with pneumatic lift for drilling on two levels Make: Ganner Model: Junior Motor: 1.5 kW Two-lever operation Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Workpiece stop Central stop Pneumatic lift Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: used, incl. 7 chain sets pneum. air suspension used, top condition, lots of accessories Wigo brand Stand machine Chain set 7 pieces Dodpfxjvvnmls Acyswd Door support Workpiece support can be swiveled down - tilted for wedge-conical holes Suction connection D 60 mm Space requirement approx. 1100 mm x 700 mm x 2000 mm Weight approx. 350 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed without guarantee or warranty

Condition: used, Door lock mortiserused, good conditionmanufactured by Haffnertype SL 100stand machinechain set 12 - 17 / 50 x 150 mmworkpiece resthandle hole motorface-plate motorlubricant unitmechanical workpiece clampingrequired space ca. l x w x h mm1500 x 900 x 2010located in  97447 Gerolzhofensale in current condition as seen- free on truck - Dwjdpfovwfv Tex Acyod

Condition: used, Year of construction: 2021, Exhibition unit (little used) Lubrication: Grease Max. output speed n2: 4,000 rpm Gear ratio (n1:n2): 1:0.8 Weight: approx. 8 kg Machine connection: HSK F63 Tool holder Usable width: 24 Storage location: Garbsen Dwjdevvi Iwopfx Acyod

Condition: used, cleaned, function checked, test run with face-plate motor Dodpfjvwfr Usx Acyowd used manufactured by Festo type KF stand machine door rest base face-plate motor exhaust connection D 50 mm required space ca. l x w x h mm 1200 x 800 x 2000 weight ca. 200 kg total connected power 1 kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 1984, used, in good condition Cleaned Function-tested Test run Manufacturer: Kölle Model: L2 Year of manufacture: 1984 Dwedey Apfnepfx Acysd Machine no.: 1788 Motor: 1.5 kW 2-lever operation Chuck runout max. 8/100 mm Table size: 520 x 290 mm Drill chuck: 20 mm Dowel drilling unit with 4 stops: 16, 22, 25, 32 mm Workpiece stop Digital height adjustment display Required space approx. 1000 x 1200 x 1300 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, function-tested without refurbishment, without warranty or guarantee

Condition: used, functionality: fully functional, number of spindles: 6, SECOND-HAND DRILLING/MORTISING MACHINE FOR RUSTICAL CHAIRS COMEC MOD. FM/SR 4+2 Djdpfsx Rchlsx Acyjwd

Condition: good (used), Code: 0476 Brand: MASTERWOOD Model: B 1/V - CE Standard Vertical chisel mortising machine for cutting recesses and grooves in wooden joinery, doors, beams and other items – CE Standard Dedpfxszqzhbo Acyjwd Technical data: Vertical stroke 150 mm Longitudinal stroke 260 mm Transverse stroke 70 mm Motor power 3 Hp Max workable height of solid wood component 170 mm Min/max workable height of assembled window or door frame 740/1030 mm Work surface 140 x 470 mm Tilt +/- 45° Pneumatic workpiece clamping Suction inlet diameter 60 mm Compressed air 6 bar Overall dimensions mm 1000 x 850 x 1750 h Weight kg 440

Condition: used, Year of construction: 1973, Storage location: Nattheim Djdpfxevvkt Us Acyswd

Condition: refurbished (used), Lower and upper drill, tiltable, for chair seats of Old America type or similar products Dwjdsytr Edopfx Acyjd no. 4 independent lower groups, tiltable No. 2 upper vertical oscillating groups

Condition: used, used manufactured by Haffner type KF20 wall machine workpiece rest lubricant unit total connected power 1,5 kW located in  97447 Gerolzhofen sale in current condition as seen. Without repair work. Pickup in the short term. - free on truck - Dsdjvwf T Espfx Acyewd

Condition: used, Year of construction: 1988, Slot drilling machine Manufacturer: SCM Dwsdpfx Aozuynuecyed Type: AS 16 Year of manufacture: approx. 1988

Condition: used, Year of construction: 2012, HOMAG BOF 211/52/AP with TBA 330, manufactured in 2012. CNC machining center with automatic loading and extensive clamping devices. Scope of supply: - Flex5 Plus (Flex5+) - Mortise unit - Four-spindle unit - All vacuum cups present on the machine, including the separately stored cups - TBA 330 loading system Multi-spanners are not included in this offer and are sold separately. Known service points: partially defective safety step mats; one drilling spindle on the MPU drilling head remains extended; the filter in the vacuum device is missing or has fallen inside. Sold in the condition as described. Available for dismantling from February 17, 2027. Inspection by appointment. Price on request. Djdpfx Acs Ahzqdeyjwd

Condition: new, Automatic mortising machine with 3 heads Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps Dwodpfxen Nv Txe Acyed 3 x horizontal hydraulic work piece clamps Speed movement in adjustable through hydraulics Automatic operation Mortising heads x 3. Manually positioned in X axis with mechanical locks Mechanical siko readouts for height position - Z axis Double eccentric operation of the mortising heads (patented design) Motor HP3 RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - ctre to ctre of mortise. Dust extraction outlets 100mm Hydraulic pump motor 10hp

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: COMEC Model: MD TOP L CA2 Type: Milling and mortise cutting machine Year of manufacture: 2024 Used, with signs of wear, good condition For sale from the location 07570 Weida Dedpfez Izm Nox Acyjwd Technical data according to the manufacturer: Axes: 3 X-axis: 2,500 mm Y-axis: 250 mm Z-axis: 180 mm Horizontal machining unit Electric spindle for milling with a 3.3 kW motor Milling spindle: 12,000-18,000 RPM, adjustable Tool holder: ER32 Drilling unit with a 1.7 kW motor With 16 individually selectable horizontal spindles, pitch 32 mm Drill chuck with a diameter of 10 mm Drill: 4,350 RPM Vertical machining unit Electric spindle for milling/drilling/routing with an 8.0 kW motor Tool rotation speed 12,000-18,000 RPM, adjustable With C-axis, interpolating 360 degrees Unit for saw blade with 2 outputs, 180° for drilling or milling tools Unit shank, tapered ISO30 Tools, collet chuck ER32 Vertical electric spindle for drilling with a 1.7 kW motor, 4,350 RPM 1 drilling head with individually selectable spindles, including: 3 vertical drilling spindles in a row, pitch 32 mm 7+7 front/rear, horizontal drilling spindles in a row, pitch 32 mm 2+2 left/right, horizontal drilling spindles in a row, pitch 32 mm Drill chuck, diameter 10 mm with lateral locking pin Clamping system 6 clamping brackets Adjustable on guide rail With 6 clamping cylinders and 6 lateral alignment cylinders with reference stroke Automatic adjustment of the supports via NC control The clamping brackets are fixed or released via program Extra workpiece width Specially designed clamping elements for a workpiece width of 100 mm Workpiece dimensions to be machined Max. cross-section of the workpieces to be machined Length: 2,250 mm Width: 100 mm Thickness: 30 mm Automatic loading system, model CA2 Adjustable on linear guides with a fixed left side and an adjustable right side Vertical parts magazine with automatic loading system and easy access for the operator Workpiece unloading system on 10 slide rails We will gladly send you further technical data and information upon request if you are interested in purchasing. The machining center is currently powered and can be inspected by appointment. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: used, Haffner SL100 door lock milling machine for simultaneously: Dsdjztvw Nopfx Acyjwd Milling out the lock case using a chain cutter Milling out the lock faceplate using a faceplate cutter Drilling out the handle and keyhole using a drill bit. Technical data: - Chain cutter motor: 1.7 kW - Rebating cutter motor: 0.6 kW - Drill motor: 0.25 kW - Blade length: 150 mm - Chain width: 12–17 mm

Condition: used, Year of construction: 1990, Engine power: 2 hp Dodpfxjx Edl Sj Acyewd

Condition: used, used, good condition, hardly runmanufactured by Haffnertype KF 20stand machinechain set 40 x 150workpiece restlubricant unit1 x mechanical workpiece clampingrequired space ca. l x w x h mm600 x 800 x 2000total connected power 1,7 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Dodpjvwgayjfx Acyowd

Condition: used, Year of construction: 1986, comb. with handle olive drilling unitused, great condition, little usedMake MakaType STV-71-BYear of construction 1986Machine no. 864653pneumatic workpiece clamping laterally 1 piecepneumatic workpiece clamping from above 2 piecesRequired space approx. 1350 mm x 1200 x 1200 mmWeight approx. 1000 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenwithout guarantee and guarantee Dodpfx Acevwfz Neyewd