Used Tenon for sale (394)

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1102, I will sell a TENON spacer frame bender. It has a Polish menu, the bender is in very good condition, in constant use. It has a Polish menu. Kedpfowp Szljx An Uodl

Condition: new, Year of construction: 2023, aking only minutes to set up, the Sedgwick TESH is easy to use and accurate in operation. Work is positioned on the rolling table against a depth stop and a fence, and is secured by a cam action clamp. Its end is then passed between two horizontally mounted cutterheads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder length are set using a multi-position depth stop, and staggered tenons are achieved by simple handwheel adjustment of the top motor. Stepped tenons, splayed tenons, scribed tenons, double tenons, and multiple bridles are all possible on this versatile machine. Combinations of 90 degree and bevelled cutting discs with appropriate spacers can also be fitted to produce interleaved joints as used in sash window construction. The Sedgwick TE/TESH is designed and built to withstand continuous production use. Its cast iron base, column and slideways provide a rigid and durable mainframe assembly, and the 2.2Kw motors supply ample power. The generously proportioned cast iron sliding table is mounted on bearing equipped hardened steel rollers for minimum wear, and cutterhead slide movements are easily adjusted on dovetail slides for ease of maintenance. The TE/TESH offers all of these safety features as standard: Automatic braking Starters with thermal overload, no volt release protection and lock off emergency stop switch. High performance lightweight cutter blocks with chip limiting devices Large diameter dust extraction outlets One piece front cutter guard Front & rear table guards Machine Specification : Ex College A1 Condition - Unused TIMBER CAPACITY 150 x 300mm MAXIMUM TENON LENGTH 150mm TABLE SIZE mm 765 x 340 (765×300 useful) TABLE WORKING HEIGHT 890mm TABLE QUADRANT ADJUSTMENT +/- 0-60 degrees HORIZONTAL TENONING HEADS CUTTERBLOCKS 150 x 150 x 30mm MAX TOOLING DIAMETER 155mm (BOTTOM) 200mm (TOP) VERTICAL ADJUSTMENT OF BOTTOM CUTTERBLOCK -2mm / + 77mm VERTICAL ADJUSTMENT OF TOP CUTTERBLOCK +4mm / + 150mm HORIZONTAL ADJUSTMENT OF TOP CUTTERBLOCK -50mm /+ 20mm DUST EXTRACTION OUTLETS 2 x 150mm MOTOR RATING 2 x 2.2 Kw (S6 40%) FULL LOAD CURRENT 4.75 AMPS STARTING CURRENT 35 AMPS VERTICAL SPINDLE SHAFT DIAMETER 40mm EFFECTIVE LENGTH OF SHAFT 205mm VERTICAL MOVEMENT 112mm HORIZONTAL MOVEMENT 150mm MAXIMUM TOOLING DIAMETER 350mm SPINDLE SPEED 4000 RPM MOTOR RATING 5.5Kw (S1) FULL LOAD CURRENT Kedpsy Efzqsfx An Usdl 11.5 AMPS STARTING CURRENT 69 AMPS ELECTRICAL VOLTAGE / FREQUENCY 3 PHASE + EARTH; 400/230 V – 50/60 Hz REQUIRED FUSE SIZE 25A/ph REQUIRED CABLE SIZE 4mm2

Condition: good (used), PARVEAU 900 Tenoning Machine -Circular saw, 400mm diameter Passage height: 150mm Motor power: 3HP -2 rollers, 160mm diameter Roller motors: 3HP each Maximum tenon length: 130mm Top of tenon to table feed: 0 to 150mm Max feed from one roller to the other: 60mm -Spindle moulder, max diameter: 350mm Spindle moulder motor: 10HP, 3000 RPM, 160mm diameter, 125mm width -Shoulder cutting unit Kedpex U S Ayofx An Usdl Tooling included

Condition: used, diameter of hob max. ca. 340 mm Kodpfx Aownmx Nen Usdl Cutting height ca. 80 mm ca. 1.300 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, The mortising machine is used to create the counterpart for the tenon. Kdodsy Tmrtopfx An Ujl

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Mortise and tenon milling machine for producing mortise and tenon joints on round timber. Kodpsy Tmn Iefx An Ujdl The “Connector” mortise and tenon milling machine was developed by the Austrian machine manufacturer Neuhauser Fürlinger. It is used to process round timber and mill mortise and tenon joints for timber construction and fence construction. Functions: Pointing, rounding (milling mortise and tenon joints), chamfering.

Condition: excellent (used), CATALOG NUMBER 5503 TECHNICAL DATA - 2.2kW motor - Power supply: 380V - Dimensions (LxWxH): 1870x1050x1220mm - Weight: 846kg Machine equipped with: - 2 work tables with angle stops, size 380x330mm - Pneumatic clamps - Tables adjustable in two planes - Capability to mill both longitudinal and round tenons on the tables - Tables adjustable up/down - Adjustable tenon width - Central lubrication - Unpainted - Italian-made - Two work stations - Pneumatic operation - Robust machine Net price: 18,900 PLN Net price: 4,500 EUR Kodoy S Ag Dspfx An Ujdl Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW Kjdpfx Aoy Snyion Ujdl side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm - 2 spindle speeds: 3000 / 4500 rpm - Motor: 5.5kW - Brake - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm - Mitre fence Ksdpjy R Dl Ejfx An Usdl - 2 pneumatic clamps - Extraction port diameter: 120mm - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), Catalogue number: 7759 Kjdpsy Ry H Sofx An Uodl TECHNICAL DATA Circular saw: - Max blade diameter: 350mm - Spindle: 30mm - Blade adjustable front/back, up/down, angle - Pneumatic movement of the saw unit front/back - Blade guard - Motor: 2.2kW I and II milling spindles: - Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 150mm - Spindle lock - Pneumatic movement of units front/back - Manual up/down adjustment - Max cutter diameter: 300mm - Motor approx. 7.5kW - Side sliding table – manual traverse - Table dimensions (L/W): 1000x380mm - Angle fence - Pneumatic workpiece clamp - Dimensions (L/W/H): 2600/3200 (for shipping 2200)/1540mm - Weight: 1450kg ADVANTAGES – German manufacture – 3-spindle machine – Not repainted – Very good condition – Used tenoner Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6024 TECHNICAL DATA - Main motor: 2.9kW - Spindle motor: 0.75kW - Carriage feed motor: 0.75kW - Power supply: 380V - Dimensions (L/W/H): 1600x1100x1200mm - Weight: 891kg Kedpjy Rr Diefx An Uodl Machine equipped with: – 2 tables measuring 300x340mm – Pneumatic clamps – Tables adjustable in two angular planes – Capability for producing longitudinal and round tenons on the tables – Mechanically adjustable table speed and spindle rotation speed – Tables adjustable up/down – Tenon width adjustment Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle Kdedpfx Ansy Rrxmj Usl - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Tenoning and Slotting Machine WEINIG Type 51 Pivoting studio window device with digital angle display Rolling table with automatic feed rate of 6 m/min. Rolling table length approx. 2,100 mm Pneumatic workpiece clamping Automatic countershaft change Crosscut saw Pneumatically timed 4-station turret Motor approx. 3 kW / 380/400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Kjdpfxsv Tb Hge An Usdl Spindle motor approx. 11 kW / 380/400 V / 50 Hz Spindle speed 3,000 rpm Tool diameter max. 320 mm Length stop system Machine including operating tools Installation dimensions L x W approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and function-tested. • All machines are sold as seen without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: used, Year of construction: 1990, Double tenoning machine with 3+3 motors, equipped with protective and soundproof cabins, 6-metre opening. Kodpfx Anoyzralj Usdl

Condition: ready for operation (used), Year of construction: 1985, Double-sided tenoning machine for parquet FOD Kdodpfx Asilc Ncon Ujl DOUBLE-SIDED for parquet production, it has a face leveling saw and a vertical cutter for the production of a groove

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Kdedpsyz Si Hefx An Ujl Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 3+3 Vertical columns to support the working units As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is the 1st Double End Tenenor in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 300 Kjdpeyz Siaofx An Ujdl Max. useful working width (mm) 2000 Min. useful working thickness (mm) 6 Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 60 No. 4 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Vertical Milling Unit (1.5 kW at 1470 rpm)

Condition: excellent (used), Catalogue number 7758 TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard - motor 1.1kW - extraction port diameter 80mm Milling Machine: - tenoning spindle: - spindle diameter 40mm - spindle working height 150mm - lockable spindle - max cutter diameter 350mm - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake - side carriage – manual feed Kdodpjyyy Dvofx An Uol - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) Ksdjymm Nqopfx An Usdl (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue number 6462 TECHNICAL DATA Kdodpjyyyk Nefx An Ujl - 2.2kW motor - 380V power supply - Head traverse motor 0.9kW - Extraction port diameter 2x100mm - Dimensions (L/W/H): 1330x1100x1220mm - Weight: 920kg Machine equipped with: – 2 tables with angle stops, size 385x330mm – 2 pneumatic clamps – Tables angle-adjustable in two planes – Capability for machining longitudinal and round tenons on the tables – Height-adjustable tables – Tenon width adjustment – Central lubrication – Unpainted – Made in Italy – Used tenoning machine, very good condition Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Spindle speed 9000rpm, Spindle motor 4kw, Cutter cycle motor 0.75kw, Maximum tenon width 100+2RMmm Maximum tenon thickness 30mm Kodpfxen Nwdls An Uodl Maximum tenon depth (shoulder) 50mm Table tilt upwards 0-15 degrees Table tilt downward 0-30 degrees Table tilt side 0-20 degrees Table fence adjustable 90 to 45 degrees Pneumatic adjustable work place clamps x 2 PLC operation TCT disposable tip cutter block Overall dimensions 1300 x 1200 x 1600mm Weight 950kg

Condition: used, Year of construction: 2003, Double-sided tenoning machine with automatic feeder Technical Features - Production: Up to 2400 pcs per hour - Produccition: very high outputs (2400 tenons / hour) - Speed of the axles portafresas: rpm 9000 - Max. length of the pins at any inclination: mm 100 + 2R - Max. shank depth with standard tool: mm 40 - Min. Shank depth with standard tool: mm 10 Kjdexrc Hzjpfx An Ujdl - Maximum spike thickener: mm 25 - Power axle carrier motors (nr. 2 of 4HP): HP 8 - Motors for rotation (N. 2): HP 2 - Motor power right group movement: HP 1

Condition: good (used), Year of construction: 1995, machine/vehicle number: 288.I.8, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine. Spindle diameter: 25 mm Spindle length: 70 mm Connection diameter: 2 x 100 mm Central lubrication Automatic or manual operation Automatic material loading and discharge Min./max. element length: 199.5 mm / 2030 mm (dimension A) Element thickness: 100 mm Width: 90 mm Unit adjustment range (B and F): + 92° / - 27° Unit angle adjustment (D and H): + 45° / - 20° Unit angle adjustment (E and M): + 45° / - 10° Spindle height adjustment (C and G): + 62° / - 5° Joint height and width adjustment Spindle angle adjustment: 0° - 90° (vertical journal) Kodpfx Ansvvvr Ao Uodl Cycle speed adjustment

Condition: used, machine/vehicle number: D 395T5, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Kdjdpfx Anjxrpkmo Ujl Mechanics designed for high operational reliability with the highest production output. USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine.

Condition: good (used), Year of manufacture: 1998 ZA 66 /95 With laser cutting indicator Dimensions: 5700 x 1500 x 1900 mm Parallelogram table, tiltable up to 60 degrees 4 motors Cross-cut unit Cutting height: 290 mm Saw blade diameter: 750 mm 5.5 kW motor Primary saw Cutting depth: 175 mm (blade 450 mm) Cutting depth: 225 mm (blade 550 mm) 10 kW motor Kdjdpfx Aey Am Eljn Uol Trimming saws, each 2.2 kW Cutting depth: 125 mm Saw blade diameter: 350 mm Tiltable up to 45 degrees