Used Monforts Knc 8 for sale (37)

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details. • Swing over bed: 410 mm • Swing over radial slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material clearance: 65 mm • Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring Lredsy If A Hepfx Amnel • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm) • Coolant system: 310 L tank, 3 bar, 40 L/min • Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) • Tool measurement setup • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support Lrjdpfx Amsy Ifptonol • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 538/04, turning diameter over cross slide: 300 mm, turning length: 600 mm, spindle bore: 52 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, quill stroke: 90 mm, torque: 240 Nm, overall weight: 7,000 kg, swing diameter over bed slide: 440 mm, Equipment: documentation/manual, Well-maintained Monforts RNC 500, can be inspected under power. Fanuc 18 i TB control 12 driven tool stations with VDI 40 mount Counter-spindle collet 173 E Main spindle Kitagawa 3-jaw chuck BB 208 Hydrostatic circular guideway FAPT programming system Main and counter spindle Chip conveyor Coolant system with flat bed filter Parts catcher with transfer device Lodpfxjyrbmho Amnorl Ejector in counter spindle Short bar loader Samsys Multi 3000 Reduction tubes Rinse gun C-axis Y-axis Further machine equipment – see photos

Condition: good (used), Year of construction: 1998, Ref. -No.: 10548 Manufacturer: MONFORTS Type: RNC 5 A17 Year of construction: 1998 Type of control: CNC-Steuerung Control: Monforts Storage location: Halberstadt Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm travel of the cross slide: 265 mm Lrodpfx Asxmd T Ejmnsl Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm Further information: The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2001, Technical details: turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min Lrodoyv Ha Aopfx Amnol max. torque on the spindle: 345 Nm c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Accerories Power Chuck Programmable Tailstock Chip conveyor

Condition: used, Year of construction: 2002, Technical details: turning diameter: 370 mm turning length: 200 mm Spindle 1 RPM: 4000 1/min control: Siemens 840 D Spindle 2 RPM: 4000 1/min power capacity: L / R 18/24 kW max. torque on the spindle: 630 nM C-Axis: 0,001° Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret No.2 stations / rotary tools: 12/12 VDI 40 turning speed range - milling: 3000 1/min power capacity - milling spindle: 8,8 kW torque rotary tools: 28 Nm Bar capacity spindle 1: 85 mm total power requirement: 65 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 5,7x2,4x2,1 m Travel x1: 260 mm Travel x2: 260 mm Travel Y1: 600 mm Travel y2: 600 mm Accerories Chip conveyor ls Parts and total counter Automatic separation wall Standard set of tool holders Power Chuck 2 x 250 mm manual tool eye l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools. Lrsdpfexlrkcex Amnjl *

Condition: used, Year of construction: 1993, CNC Lathe Monforts RNC 4 with KNCS 260 chuck Collet up to Ø 60 mm Bar feeder up to Ø 65 mm Year of manufacture: 1988 Lots of accessories CNC Lathe Monforts RNC 4 with 15-series control and C-axis, KNCS 260 chuck, year 1995, lots of accessories RNC 5 Chucking-only lathe Year of manufacture: 1992 Lrodpfoyq R T Isx Amnel Includes many jaws Monforts RNC 7 with automatic tailstock, 1500 mm Z-axis travel Driven tools with spindle indexing every 2.5° Chuck 500 mm, many tools and jaws included Year of manufacture: 1993 Very good condition The last CNC lathe, an RNC 7-1000 with automatic tailstock, steady rest, C-axis Lots of tools and jaws Ideally, everything would be sold as a package — 5 Monforts lathes with a very large amount of accessories.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. Lsdpfxsxcwdvo Amnorl All tools and accessories are included. Inspection possible by appointment.

Condition: used, Year of construction: 2008, turning diameter 280 mm turning length 600 mm Turning diameter: 280 mm Ljdpfx Amjydfqzenerl Turning length: 600 mm

Year of construction: 2000, condition: ready for operation (used), Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available. Lrsdpfstxquhsx Amnel

Condition: ready for operation (used), Year of construction: 2013, Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible. Lredpfsyhqb Tsx Amnol

Year of construction: 1991, condition: ready for operation (used), Maschinentyp - CNC Drehmaschine / CNC lathe Hersteller/ Manufacturer - MONFORTS Modell RNC3 Lrjdpfx Amewqc Rtenjl Baujahr / Year of manufacture - 1991 Steuerung /control typ: FANUC 15T Werkzeugenanzahl: 12 Stk angetriebene Werkzeuge / Number of tools: 12 pcs driven tools Die Spindel kann bei 2,5 Grad positioniert werden / The spindle can be positioned at 2.5 degrees 3-Backen-Hydraulikfutter / 3-jaw hydraulic chuck Automatische Werkzeugmessung / Automatic tool measurement Späneförderer / Chain conveyor Kühlwasserausrüstung / Cooling water equipment Preis: auf Lkw geladet / Price: loaded on truck Mit Dokumentation / With documentation Die Maschine steht schon nicht unter Strom. Wegen neue Maschine kauf möchten wir verkaufen, bis die Demontage hat alle gut funktioniert./ Because of new machine purchase we would like to sell until dismantling has everything working well.