Used Milling Arbor for sale (9,637)

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, machine/vehicle number: FSS 400 / 20041, feed length X-axis: 1,120 mm, feed length Y-axis: 345 mm, feed length Z-axis: 400 mm, overall weight: 4,100 kg, For sale is a UNITECH milling machine, model FSS 400. As shown in the photos. The machine is used, but the feed coupling is defective and needs to be replaced or repaired. Iijdpfx Aoznaqisatjf A Siemens S7 control system has already been installed. Tool holder: SK50 Table size: 1600 x 400 mm The customer is responsible for organizing and paying for the collection/loading of the machine.

Condition: used, Year of construction: 2015, functionality: fully functional, Model: OKUMA MULTUS U3000 2SW 1500 (CNC turning and milling center) Control: OKUMA OSP-P300S Turning length: approx. 1,500 mm Max. turning diameter: up to 650 mm Tool system / interface: HSK-A63 Main spindle: Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm (2 gear stages) Spindle nose: Short taper size 6 Spindle front bearing: Ø 120 mm Spindle bore: Ø 80 mm 3. Counter spindle (Okuma motor spindle) Travel: Traversable on the W-axis Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm Spindle nose: Short taper size 6 Spindle front bearing: Ø 100 mm Spindle bore: Ø 62 mm Tool spindle / Milling spindle (Okuma motor spindle) Drive power: 22 kW Torque: 120 Nm Max. speed: 12,000 rpm Tool holder: HSK-A63 Axes & Travel Ranges C-axis: 360° (Indexing / Positioning in 0.001° increments) Iisdpfx Aaozu I U Aotof Y-axis: Stroke +125 mm / -125 mm (Total stroke 250 mm) B-axis: 240° (Indexing / Positioning in 0.001° increments) Tool magazine & Turret Tool Magazine (ATC): 120 positions Lower turret: 12 stations with direct mounting system "radial" Turret guides: ZB-axis with cylindrical roller linear guide XB-axis with slide guide Coolant supply / Internal coolant supply (ICS): max. 20 bar (including bag filter) External cooling for tool spindle: max. 8 bar Accessories: Short loader LNS Quick Load Seri O III

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Iiedpfx Aszukd Hoatef Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: like new (used), Year of construction: 2022, functionality: fully functional, turning length: 725 mm, turning diameter over cross slide: 590 mm, turning diameter: 376 mm, spindle motor power: 30 W, spindle speed (max.): 2,800 rpm, spindle bore: 115 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, torque: 1,112 Nm, bar passage: 103 mm, bar diameter (max.): 103 mm, quill stroke: 100 mm, quill diameter: 100 mm, quill travel distance: 100 mm, swing diameter over cross slide: 590 mm, spindle nose: A 2-11, swing diameter over bed slide: 720 mm, feed force X-axis: 9,465 N, feed force Z-axis: 17,379 N, Equipment: documentation/manual, rotational speed infinitely variable, As-new machine, only used for commissioning and combined with a Universal BIG 70 LoadAssistant holder. Can also be purchased separately. Ijdpfx Aaoyud Uaetjif

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Iijdpfxex D Tbmj Aatjf Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: as good as new (ex-display), functionality: fully functional, Surface grinder. Taiwanese machinein new condition. IT has been a demonstration machine, has run a few hours. Standard accessories: Grinding wheel Wheel flange Flange extractor Wheel balancing arbor Wheel balancing base Wheel dresser with diamond Leveling screw & plates Tool box & tools Manual Optional accessories: 3 HP Spindle motor (siemen brand) instead of 2 HP Longitudinal by sensor & solenoid valve Iedpjm Tv U Tsfx Aatjif Electro magnetic chuck, 150 x 450 mm (Fine pole) Coolant system (Capacity 52L, 1/8 HP) Auto crossing stroke adjustment Crisscross grinding Power rapid up/down system (AC motor, 1/5 HP) Wheel flange (extra) Back water splash shield Led lamp instead of halogen lamp Spindle motor inverter 3 HP (Taiwan made) Digital readout (lu, cross: 300 mm + vertical: 450 mm; 2 axes monitor) Auto. demagnetizer for chuck 5A If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. Iisdpfxjxwvruj Aatef The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 400 mm turning length - mm control DMG Mori SLIMline z-axis ca. 750–755 mm x-axis 276 mm y-axis +/-60 mm greates pass round over bed 700 mm Additional information The machine is in very good condition and has recently been inspected and measured by a service technician. The lathe was primarily used to manufacture turned plastic parts. CNC lathe with driven tools, C-axis, Y-axis, and counter-spindle CNC control: DMG Mori SLIMline multi-touch control (19"/Operate 4.7 on Siemens) Screen language: German/English Main spindle: A2-8 with AC motor Drive power 25.5/17 kW (100/40% duty cycle) Spindle speed 4000 rpm Hollow clamping system, max. bar capacity 80 mm Counter-spindle: A2-6 designed as a built-in motor spindle ISM 52 with hydraulic clamping device Drive power 14/13 kW (100/40% duty cycle) Spindle speed 5000 rpm 12-station servo tool turret: VDI 40 mount with 12 driven tool stations Equipment: Y-axis +/- 60 mm Ijdpfxszu Nxpe Aateif Direct position measuring system (X and Y axes) Bar package & interface IEMCA KID80/16 short bar loader, bar capacity 80 mm Differential pressure clamping for main spindle Chuck flushing for main spindle Reduction tube for main spindle Hainbuch SPANNTOP nova Combi G80 Axzug collet chuck Differential pressure clamping for counter-spindle Chuck flushing for counter-spindle Automatic workpiece ejector Counter-spindle with internal coolant supply for workholding flushing SMW BB-D210 hydraulic 3-jaw chuck for counter-spindle SMW BB-D250 hydraulic 3-jaw chuck High-pressure pump 12 bar Coolant spray gun bar Dual cartridge filter for coolant, filtration fineness 60 µm Manual tool measuring device in the workspace, Marposs make Tool monitoring system, Easy Tool Monitor 1.0 technology cycle Alternating Speed ??technology cycle 3D data model in STEP format DMG MORI Messenger V2 DMG MORI Netservice – client Finished part discharge conveyor Chip conveyor with right-hand discharge External electronic handwheel Tool holder package

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, is well-maintained and is in fully working order. Inspection and test runs are possible. Specifications Iedpfx Ajzlar Ueateif Year of manufacture: 2017 230V (1-phase) 3 milling heads Spindle speed: 12,000 rpm Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Video of the machine in operation available Optionally available: Tekna TK280 punching machine (2012) Compressor Asking price: €9,500. Serious offers will be considered.

Condition: ready for operation (used), Tool milling machine DECKEL FP 2 LB incl. 3-axis digital control (ACU-RITE) -Travel ranges X/Y/Z 795x300x400mm -Automatic longitudinal / transverse / planar feeds -Rapid traverse in all three axes -Spindle speeds 40 - 2000 rpm -Table clamping area 1000x440mm -Tilting table -Digital display, 3-axis (ACU-RITE) -Vertical - horizontal milling attachment -Vertical head with drilling quill -Tool holder ISO 40 -Coolant system -Machine lamp -Various tool holders Ijdpfx Aszu Nhweatjif -Machine documentation Dimensions: L x W x H 2.5 x 2.3 x 1.8 meters / Weight 2200 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Year of construction: 1984. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 RPM - Power: 3.7 / 4.4 KW - Spindle brake - Automatic feed: X-Y-Z, continuously adjustable, 6.3 / 630 mm/min - Rapid traverse X-Y-Z: 1300 mm/min - Fixed angle table - Vertical quill with 90 mm stroke - Tool holder: ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain Iedpfjytb Uhex Aateif - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head - Machine manuals with spare parts list and electrical diagrams - Cabinet with accessories, see photos

Condition: ready for operation (used), Scharmann - WB 80 / Heidenhain digital display ND 780 -Travel ranges X/Y/Z 1300x1200x1200mm -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 tons -Spindle mount MK5 -Automatic feeds 0.053-6.35mm Ijdpfxeztyi No Aateif -Rapid traverses -Spindle speeds 24-2880 rpm -Coolant system -Various accessories / tool holders etc. Errors and omissions excepted.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Tool milling machine Kunzmann WF 400MA with Heidenhain 3-axis active digital display – in like-new condition, CE-compliant!! Technical data: >> Year of manufacture 2016, machine number 410737 >> Milling table, clamping surface 600 x 375 mm >> 5 T-slots >> Slot width 14 H7 >> Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed rate up to 5 m/min >> Travel distances X/Y/Z: 410/350/450 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor (100%/25% duty cycle) 8.5/16.2 kW Accessories and equipment: Iedpjztw I Ajfx Aateif >> Heidenhain 3-axis active digital display >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the machine: Offered for sale is a Kunzmann WF 400MA tool milling machine with a 3-axis active digital display from Heidenhain. It proves its qualities daily in workshops, production facilities, and training centers. This universal milling machine is in like-new condition. Furthermore, the machine has hydraulic clamping in both the vertical and horizontal positions. Converting from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h Iisdpfozukurox Aatof - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool milling machine Kunzmann WF 400MA with Heidenhain 3-axis active digital display. Like-new condition. CE compliant! Technical data: >> Year of manufacture 2015, Machine no. 410749 >> Milling table clamping surface 600 x 375 mm >> 5 clamping slots >> Slot width 14 H7 >> Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed rate up to 5 m/min >> Travel distances X/Y/Z: 410/350/450 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system Ijdeztwy Ejpfx Aateif >> Weight approx. 1800 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor (100%/25% ED) 8.5/16.2 kW Accessories and equipment: >> Heidenhain 3-axis active digital display >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the machine: Offered is a Kunzmann WF 400MA tool milling machine with a 3-axis active digital display from Heidenhain. It proves its qualities daily in workshops, production facilities, and training centers. This universal milling machine is in like-new condition. Furthermore, the machine has hydraulic chucks for both vertical and horizontal operation. Converting from vertical to horizontal operation is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up.

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 3000 mm Cutting depth: 125 mm Scoring cutter: yes Sawblade height and tilt adjustment: handwheel Width stop adjustment: manual Sawblade angle indicator: scale Cutting height indicator: scale Width stop indicator: scale Crosscut ruler indicator: scale Iiodpfxowhuuxo Aatof Sawblade diameter: 400 mm Speed: 4000 rpm Motor power / saw: 4.4 kW Motor brake: yes / automatic Mill arbor pivoting: yes 0 - 45° Mill arbor height and tilt adjustment: handwheel Mill arbor height and tilt indicator: scale Mill arbor: 30 mm Mill arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. tool diameter: 180 mm Motor power / milling cutter: 4.4 kW Extraction connection: 100 mm, 100 mm, 80 mm Machine length: 2500 mm Machine width: 1500 mm Weight: 800 kg

Condition: used, Year of construction: 1980, functionality: fully functional, We are offering this used universal drilling and milling machine, ALF 80, manufactured in 1980. Drilling machine SORALUCE ALG80, including technical documentation. Heidenhain ND70 control system. Tilting table for drilling machine, complete with tooling for the drilling machine. Manufacturer: Universal Drilling and Milling Machine Type: ALF 80 Year of manufacture: 1980 Iiedpfx Aaszl Rqhstsf Machine no.: 55/5-110 Date: 10.11.1980 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, functionality: fully functional, Drill-milling machine FM 55 HSV equipped with height adjustment of the milling head via an auxiliary motor and automatic quill feed. The basic configuration already includes all essential accessories (3-axis digital readout, power feed for the milling table, central lubrication, cooling device, LED work light, cast iron base with coolant channel, CE-compliant safety equipment), making this machine suitable for universal applications. Standard equipment includes automatic quill feed and threading mode Rapid X-axis table adjustment thanks to automatic feed with rapid traverse function Cast iron machine base ensures vibration-free operation Enhanced productivity thanks to the standard 3-axis positioning display Two-stage motor with 12 selectable speeds (75 – 3200 rpm) Versatile use – e.g. slot milling, surface milling, boring, etc. Milling head tilts both sides for angled drilling, edge milling, etc. Stability due to dovetail guideways for the gear head Dovetail guideways in the X, Y, and Z axes, adjustable via gib strips Convenient milling head height adjustment by motor Manual central lubrication for all guideways Technical specifications Max. drilling capacity: 32 mm Iisdpfx Asytdy Teatof Max. drilling capacity in castings: 40 mm Max. face mill diameter: 80 mm Spindle/column distance max.: 220 mm Spindle/table distance: 95 – 485 mm Quill stroke: 120 mm Automatic quill feed – range: (3) 0.10 / 0.18 / 0.26 mm/rev Min. spindle speed: 75 rpm Max. spindle speed: 3200 rpm Speed change – number of steps / stepless: 12 Spindle taper: MK 4 Table size – width: 800 mm Table size – depth: 240 mm Travel in X-axis: 420 mm Travel in Y-axis: 200 mm Head vertical adjustment: 390 mm Head swivel: -60° to +60° T-slots (number, size, spacing): 14 mm Quill vertical lifting motor power: 90 W Motor power: 1.5 / 2.2 kW Motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions – width: 1270 mm Dimensions – depth: 960 mm Dimensions – height: 2120 mm Weight approx.: 447 kg Scope of supply 3-axis digital readout ES-12V LCD 3–16 mm / B16 quick-action drill chuck Drill chuck arbor MK 4 / B16 Spindle M 16 Reducer sleeve MK 4/3 Combined milling arbor MK 4/27 mm Automatic quill feed Height-adjustable safety guard Milling head lifting motor Central lubrication X-axis table feed AL 450 D LED work lamp Electronic spindle speed indicator Electronic quill stroke indicator Thread-cutting mode Slat safety guard Cooling system Longitudinal scale Cast iron base with coolant system Operator tools

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Ijdozukcpepfx Aateif

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display, Heidenhain active control, and continuously variable feed. Technical data: >> Year of manufacture: 1982, Machine no. 2101-1995 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 2 axes >> Rapid traverse in 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable by 100mm on the spindle head >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Operating manual, parts list About the machine: Iedpjzrn Tyofx Aatsif Offered is a Deckel FP1 universal milling machine in very good original condition. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs smoothly. The FP1 was in a training workshop at a university and was used very little. This newer FP1 model has continuously variable feed in two axes, and the machine also has rapid traverse in these axes. A major advantage is the active 2-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 20031, CNC milling machine with rotary table and tool changer Iodpfezlkw Iox Aateif Control system: Contur 3 Tool holder: SK 40 Accessories: Vise, drilling head Wiring diagrams and documentation available.

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Iisdpfow Agxrox Aatjf Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Ijdpozi Awhjfx Aateif Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Year of manufacture: 1984 Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm X-axis stroke: 150 mm Ijdpfx Aozukc Noatsif Drive: 3 kW Roughing spindle Finishing spindle Locking arm Control lever with cable Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works

Condition: used, Year of construction: 2004, functionality: fully functional, CNC gear hobbing machine Control: Siemens 840 D Power Line Technical data: Max. workpiece diameter: 150 mm Table diameter: 145 mm Max. table speed: 800 rpm Distance between centers: 10 – 200 mm Max. axial travel: 250 mm Swivel angle of milling head: +/- 45° Max. tailstock travel: 300 mm Max. rapid traverse rate: 17,000 mm/min Drive power of milling head: 19 kW Max. module: 3 mm Max. speed of milling spindle / tool speed: 4,500 rpm Max. diameter of hobbing cutter: 80 mm Max. length of hobbing cutter: 200 mm Dimensions approx.: 5.5 x 3.7 x 3.1 m Weight approx.: Iodpfxezkwvnj Aatsif 9,500 kg Equipment: Chip conveyor Oil mist extraction / oil extraction Oil cooler Steady rest with lowering device and vertical adjustment Rotary ring loader with two workpiece grippers Loading belt system for automatic feeding 5 milling arbors / hobbing cutter holders: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm 1 x Ø 40 mm Other: Video recordings via WhatsApp