Used Michael Relay for sale (652)

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Godpfx Ajzuyx Heg Tjuh Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, PLC control, digital output, digital output, Relay Output -Manufacturer: Siemens, Simatic S5 digital output -Type: 6ES5 452-8MR11 -Number: 4x module available -Price per piece Guodpfjh Ap A Isx Ag Toh -Dimensions: 140/110/H50 mm -Weight: 0.3 kg/pc

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, isolating amplifier -Manufacturer: Phoenix Contact, Conf. Isolation Amplifier -Type: MCR-FL-C-UI-UI-B-DCI-24/230 Guedpfx Aof Ir Eyog Teh -Number: 11x relays available -Price: per piece -Dimensions: 100/15/H115 mm -Weight: 0.1 kg/piece

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, analog output terminal Guedpogf Ithofx Ag Toh -Manufacturer: Beckhoff, 4-channel analog output terminal -Type: KL 4414 -Dimensions: 12/68/H100 mm -Number: 1 piece available -Weight: 0.075kg

Condition: ready for operation (used), Fully hydraulic automatic circular saw for workshop and production. The material is clamped by a hydraulic vices. The control offers simple machine operation. The length can be adjusted via a vernier with 0.1 mm resolution. The piece count adjustment The piece count is set by a piece count counter which switches off the machine when the piece count is reached. The material feed is carried out via a hydraulic cylinder and ensures the highest cutting accuracy. If you have any questions or need a different cutting range, just give us a call. We would be pleased to show and demonstrate the machines to you. Technical data: Bandsaws KASTO Machine type GKS AU Technical data: Drive power Drive power saw gear. 1,6/2,5 KW Guedpfx Aeiuz Smeg Toh Cutting speed 14/28 m/min Cutting range round: 140 mm Cutting range flat: 160x90 mm Saw feed hydraulics Hydraulic Saw blade dimension 425 mm Hydraulic material feed 600 mm Material support. 1050 mm Machine dimensions Length/width 2575x2700 mm Height 1900 mm Weight of the machine 1350 kg Year of manufacture 1987

Condition: used, PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal, bus terminal Gsdpfx Asm Rk T Esg Tsuh -Manufacturer: Beckhoff, 4-channel digital output terminal -Type: KL2424 -Number: 4 available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, isolating amplifier, converter -Manufacturer: Phoenix Contact, isolation amplifier / converter unused original packaging -Type: MCR-C-UI-UI-DCI -Order No.: 2810913 -Number: 1x relay available -Price per piece -Dimensions cardboard: 115/110/H30 mm Gujdpfx Agjldk I Ie Tjh -Weight: 0.2kg/pcs

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Ott Atlantic V6 edge banding machine capping, 2 x milling, radius scraper, cleaning disks Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used Guodpfxer Elhvs Ag Tsh year of construction 1999 price 5500.-

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp Gujdpfxsr Im R Hs Ag Tsh -Type: DIL ER-22-G -Voltage: 60 VDC -Number: 19x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece

Condition: used, mileage: 230,870 km, power: 120 kW (163.15 HP), first registration: 05/2013, fuel type: diesel, empty load weight: 4,285 kg, maximum load weight: 715 kg, overall weight: 5,000 kg, axle configuration: 4x2, wheelbase: 3,665 mm, fuel: diesel, CO₂ emissions: 262 g/km, fuel consumption (urban): 11.3 l/100km, fuel consumption (extra-urban): 9.1 l/100km, fuel consumption (combined): 9.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 4, total length: 6,450 mm, loading space length: 2,600 mm, loading space width: 1,500 mm, loading space height: 1,800 mm, Year of construction: 2013, construction height: 2,980 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, soot filter, traction control, The Mercedes-Benz Sprinter II 516 CDI is a used ambulance with automatic transmission and Euro 5 emissions standard. The vehicle was first registered on May 30, 2013 and has a mileage of 230,870 km. The diesel engine with a displacement of 2,143 cc produces 120 kW (163 hp). The car stands out in terms of color with its yellow-red daylight fluorescent color. Special features include air conditioning, Eberspächer auxiliary heating and bi-xenon headlights with cornering lights. The Sprinter offers reinforced front and rear axles, a 75-liter fuel tank and twin tires on the rear axle for greater stability. In the interior it is equipped with an Audio 20 radio, adjustable exterior mirrors with integrated indicators and a heat-insulated driver's cabin. The vehicle has a combined fuel consumption of 9.9 l/100 km and CO2 emissions of 262 g/km. It has 4 seats, 4 doors and measures a total of 6,450 mm in length, 2,150 mm in width and 2,980 mm in height. Special equipment: 1 DIN slot at the front under the roof liner, passenger side airbag, starting aid (hill start assist), Audio 20 audio system (radio with CD player), exhaust in front of the left rear axle, outside temperature display, additional battery (reinforced), bi-xenon headlights with cornering light, 220 A generator, steering wheel (steering column mechanically adjustable), parameterizable special module, inside rear view mirror, rear wall with window, front mud flaps, reinforced rear stabilizer, reinforced front stabilizer, fuel level sensor for additional heating, cut-off relay for additional battery, rear wall paneling, fleece battery 95 Ah, preparation for mobile phone/cell phone/comfort telephony, reinforced front axle, thermal insulation in driver's compartment, additional heating (hot water) Other equipment: Adaptive brake light, driver's side airbag, washer fluid level display, electric outside mirror. adjustable and heated, both, exterior mirrors with integrated indicator light, battery 74 Ah, brake assistant, braking system with ABS+ASR, roof paneling in the driver's cab, lockable glove compartment, body/structure: flatbed, fuel tank: main tank 75 litres, headlight range control, truck registration, engine 2.1 litres - 120 kW CDI KAT, wheelbase 3665 mm, smoker's package, tire repair kit with compressor, low emissions according to Euro 5 emissions standard, seat belt system with warning system (driver's side), seat cover/upholstery: Lima fabric, Assyst maintenance interval display, heat-insulating glazing, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle. CoC available Equipment was determined using a VIN query, errors can occur here for technical reasons Gujdpfx Agjr Uznyj Teh Sale only to commercial operators (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 205,513 km, power: 80 kW (108.77 HP), first registration: 05/2008, fuel type: diesel, fuel: diesel, Year of construction: 2008, Mercedes Benz Sprinter II 311 CDI ∗Crew Cab ∗Dump Truck ∗Garbage Truck Gerber Guodpfx Ajzmcu Iog Tjh • Engine: 2.1 L - 80 kW CDI catalytic converter • Low emissions, compliant with Euro 4 emission standard, Group III • 6-speed manual transmission • Body/Superstructure: Crew cab with standard platform • Steering wheel (steering column mechanically adjustable) • Airbag, driver side • Exterior mirrors, electrically adjustable and heated, both sides • Exterior mirrors with integrated turn signal • Headliner in the cab • Lockable glove compartment • Seats in the cab: Driver’s seat, heated • Seats in the cab: Comfort suspension seat, driver side • 1 DIN slot in front, under the headliner • Entry lights • Digital tachograph • Interior rearview mirror • Rear wall with window • Rear wall lining • Outside temperature display • Washer fluid level indicator • Headlamp leveling system • Service interval indicator, Assyst • Heat-insulating glazing • Rotating beacon • Front mud flaps • Trailer socket, 13-pin • Exhaust pipe in front of the rear axle, left side • Battery: 100 Ah • Additional battery (reinforced) • Separating relay for additional battery • Generator: 180 A • Front stabilizer bar, reinforced • Rear stabilizer bar • Fuel tank: Main tank 75 L • Auxiliary heater (air) with timer • Fuel level sensor for auxiliary heater • Pre-installation for a three-way tipper • Wheelbase: 3665 mm • Tires: 235/65 R16C • Tire tread: 9/9 / 8/8 • Spare wheel in driving condition • Gross vehicle weight: 3,500 kg • Unladen weight: 2,590 kg • Payload: 910 kg Superstructure • Gerber tipper body • Superstructure dimensions: 2,550 mm x 1,960 mm x 1,310 mm (LxWxH) - German vehicle! - First owner! - MOT/emission test valid until 03/27, renewed upon request for an additional fee! Errors and prior sale excepted! = Further information = Unladen weight: 2,590 kg Payload: 910 kg GVW: 3,500 kg

Condition: new, mileage: 40 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 3,000 kg, maximum load weight: 500 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, additional headlights, air conditioning, central locking, crane, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 tipper truck with crane and remote control, delivery time 2 months, the vehicle is available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500kg, payload of the finished vehicle with crane and tipper body approx. 500kg - Manual transmission - Limited-slip differential - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500kg with electrical connector (factory-fitted) - Heated exterior mirrors - Automatic climate control Guedpfx Aozv Nr Eeg Tsh - Radio with hands-free phone system - Reversing warning system - Auxiliary drive with speed increaser - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum tipper body - Controllable manually and via crane remote control - Internal dimensions: 2575 mm x 1775 mm x 400 mm - Prepared for side extension to 580mm - Loading height unladen 980mm - Aluminum floor - 6 lashing points, recessed, according to DIN EN12640 1000kg - Aluminum side walls, folding, upper edge protected - Rear wall with pendulum automatic and folding - Work light Crane: F32 with remote control, 3 x hydraulic, 1 x mechanical extensions - Lifting capacity according to manufacturer: 3.20m = 815kg, 4.40m = 575kg, 5.60m = 400kg, 6.80m = 300kg, 8.05m = 220kg - Design according to CE directive (EN 12999) - Slewing range 370° (mechanical slewing range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard-chrome plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs extendable on both sides, special support, support width 3.10m - Hydraulic support legs, swiveling 30° and 180° - CE, incl. M.O.L. - Standard color RAL 3020 traffic red - all cylinders painted black - Load hook and mounting brackets - Dead point above the support legs (cannot be tilted) - Painting with epoxy primer and topcoat: two-component or powder coating - Support plates - Articulated support plates (2 pcs) for support legs - CE version - Subject to errors and prior sale. ?si=wuCaQnJSZ8LahUV9 ... Climate control, climate control system, VAT can be shown separately, ASR, ABS, radio, on-board computer, heated mirrors, electric immobilizer, central locking with remote control, trailer coupling, power steering, rev counter, limited-slip differential, tinted glass, spare wheel, twin tires, cab: short cab, electric windows, auxiliary headlights, thermal protection glass, auxiliary drive, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rentable, particulate matter sticker: 4 - green.

Condition: used, mileage: 2,950 km, power: 90 kW (122.37 HP), first registration: 05/2025, fuel type: electric, overall weight: 2,660 kg, fuel: electricity, energy efficiency: A, color: black, gearing type: automatic, suspension: steel, number of seats: 5, total width: 2,159 mm, total height: 1,811 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, E07 Hill-start assist, Z6L Progressive, E1K Navigation package, FR8 Rear-view camera, Q10 Crossmember for trailer coupling, SA4 Airbag for driver and front passenger, 502 Digital extra: Updates for intelligent speed assistant, 805 AEJ X4/1, B25 Parking brake, electric, BA3 Active brake assist, BB0 Braking system with ABS and ASR, BB3 Electronic stability program (ESP), C0Z Door sill trims with "Mercedes-Benz" lettering, C1J Gear shift knob in leather, C6L Multifunction steering wheel, CK4 Handle strip above license plate in vehicle color, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM0 Bumpers painted, E00 High-voltage battery - Bi-Relay version, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1W Selection of recuperation levels, E2J AC charging 22 kW / DC charging 75 kW, E2K Charging cable Mode 3 (Type 2, 3x32A, 22kW) 5m, E38 Extended range, E3N Digital extra: Extended MBUX functions, E3P MBUX multimedia system and navigation with 9.5 inch display, E4S Digital extra: Smartphone integration, E8T High-voltage battery (45 kWh), EB1 45 kWh battery - water-cooled, EC5 Pre-installation for digital extras, EI0 Wireless charging system for mobile devices, EM7 2 USB ports in the center console at the rear, ES1 12 V socket in the passenger compartment, ES2 12 V socket in the trunk / cargo area, EW5 Digital extra: Remote and Charging Premium, EW8 Digital extra: Remote and Navigation Services, EX8 Digital extra: MBUX Navigation Plus, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call. We will gladly calculate an individual financing or leasing offer for you and take your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage, touch-up paint was applied to the vehicle as part of the preparation. No liability for printing and typographical errors. Errors and prior sale reserved ... more on our homepage. Gujdpfx Agszunp Hj Tsh

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright, relay contactor -Type: SW180B-3 -Voltage: 24 V -Number: 9x contactors available -Price: per piece -Dimensions: 122/60/H45 mm -Weight: 0.7 kg/pc. Guedpfx Agsy Aty As Tjh

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ LEASE ++ BUY ++ LEASE ++ BUY ++ LEASE ++ BUY ++ Mercedes Benz Sprinter 519 CDI with Leistikow B55 High-Pressure Cleaning System Internal Number: #527 Leistikow B 55 * Auxiliary drive from the Sprinter * High-pressure pump AQUABAR KF32/36 * Approx. 120 liters/minute at 170 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN19 * 2nd hydraulic HD hose reel for approx. 80m DN13 * Filling hose reel with approx. 60m DN20 * Approx. 1,600 liter water tank * Low water level protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED warning lights * Various storage options * Adjustable heavy-duty shelf * Standard cleaning nozzle equipment Gujdpfoyzllbox Ag Tsh Special equipment: 2nd battery (auxiliary battery) in the engine compartment, 3-button remote control for central locking, trailer socket 13-pin, battery disconnect switch 1-pole, driving assistance system: traffic sign recognition, tachograph operation in front under the headliner, chassis: stabilization level II, all-weather floor mats, vehicle without lashing eyes, gearbox lock for auxiliary drive, cup holder in front, grab handles A-pillars, additional main key, rear door (opening angle 270 degrees), folding cover for storage compartment, terminal block for electrical connections (driver's seat box), comfort lighting in the passenger/cargo area, charging package dashboard (USB connections and 12V socket additionally), cable duct on the rear portal, cable duct on the side wall, navigation system for MBUX multimedia system, fog lights with cornering light, auxiliary drive 2 B with reduction gear, parameterizable special module, cross member with integrated step, sliding door cargo/passenger area left, mud flaps at the rear, seats in the cab: driver's seat comfort, fuel gauge for auxiliary heater, separation relay for battery additionally, front axle reinforced, preparation for gearbox oil cooler, winter package, power assist for sliding door left, power assist for sliding door right Additional equipment: 3rd brake light, storage compartment above the front window, storage compartment below the dashboard passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, hill start assist, trailer coupling: electrical system for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assistant, outside temperature indicator, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact switch, automatic switching of headlights, entry handle on the rear pillar on the right, entry handle for the sliding door on the cargo area partition, driving assistance system: turning assistant, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: start-up information assistant, driving assistance system: Attention Assist (fatigue detection sensor), driving assistance system: Intelligent Speed Assistant, driving assistance system: breakdown management, driving assistance system: crosswind assist, digital tachograph, generator 250 A, speed limiter 90 km/h, body/superstructure: van high roof standard, instrument cluster with color display, communication module (LTE) for digital services, fuel

Condition: used, machine/vehicle number: 2904, mileage: 22,488 km, first registration: 01/1990, fuel type: diesel, empty load weight: 18,143 kg, overall weight: 31,751 kg, color: green, driver cabin: other, gearing type: other, suspension: steel, Year of construction: 1990, Oshkosh A/S32 R11 Tanker, 6,000 Gallon Tank Guodpfszk Iclex Ag Teh Cummins 6-Cylinder Turbo Diesel Engine, 8.3 Liter PUMP RATE: 600 GPM REFUELLING CAPABILITY: OVER-WING AND UNDER-WING TANK, LINES, AND FILTER SEPARATORS HAVE BEEN FLUSHED. THIS VEHICLE IS READY FOR OPERATION. Vehicle is ready for use. 6,000 gallon (approx. 22,712 liter) capacity. Tank, lines, and filters have been flushed. The price is for the vehicle in its current condition, including valid TÜV inspection and registration; the price is €30,000 net. Several of these vehicles are available with different mileage. Please schedule an inspection appointment with us.

Condition: used, machine/vehicle number: TYBFEB01BLDD36083, mileage: 346 km, fuel type: diesel, fuel: diesel, color: other, Year of construction: 2026, Equipment list: Drive system: 4x2 Permissible total weight: 3500 kg Engine power: 110 kW Wheelbase: 2500 mm Cab: MB 0400 natural white Gujdpfxezhlv Rj Ag Tsh Vehicle equipment Engine >>> Engine, R4, 110 kW (150 hp), 2620/min OM4 engine version, Euro VI Step E, Canter >>> Engine, start/stop system Clutch & Transmission >>> Manual transmission Axles & Suspension A86 Limited-slip differential >>> Axle ratio i = 4.111 (Canter) Wheels & Tires RN0 Steel rim 16.00 x 5.00 >>> Wheel center caps (plastic) >>> Tire manufacturer: Continental >>> Premium Seal tire repair kit RM6 Traction tires, complete 1.A. B21RLA 1F 2x 195/75 R 16 Regio Drive Continental VanContact 4Season 2.A. B21RLA 1F 4x 195/75 R 16 Regio Drive Continental VanContact 4Season Frame & Frame Components >>> Chassis ladder frame, reinforced CR8 Body mounting brackets on the vehicle frame >>> Main tank, 70 l OU3 AdBlue tank cover KA6 Cover, exhaust system >>> Bumper, 3-piece (plastic/steel) CO9 Scattolini rear underrun protection Rear underrun protection including integrated lamp and license plate holder. QQ2 MOSOLF, ball head for rear underrun protection ex works - towing capacity 3500 kg Braking system >>> Electronic Stability Program (ESP) >>> Disc brakes on front and rear axle with electronic wear indicator >>> ABS with electronic brake force distribution Exterior Cab >>> Comfort single cab >>> Tilting cab F62 Heated rearview mirror VB7 Short mirror arm including wide-angle mirror >>> Central locking, separate remote control >>> Immobilizer, with transponder Interior Cab >>> Driver's seat armrest SH6 Driver comfort suspension seat, horizontal suspension >>> Adjustable steering column holder SA5 Airbag, driver >>> Vinyl floor covering >>> Power windows for driver/passenger door, electric >>> Instrument lighting, infinitely adjustable JW0 Reversing warning EF3 MOSOLF, 2DIN touchscreen DAB+ radio, Apple CarPlay 2-DIN touchscreen radio, including extensive functions such as Apple CarPlay. >>> Operating voltage base vehicle, 12V H07 Automatic climate control >>> Glove compartment, lockable >>> Center storage compartment, dashboard >>> Storage box on the back wall of the cab >>> Storage, between the front seats >>> Cupholder >>> Storage above the windshield, 1 compartment Electrical System / Electronics EE9 Vehicle battery reinforced, 2x100Ah (2 batteries) OT6 Battery cover, double OV2 Preparation for battery disconnect relay 12V >>> Daytime running lights, automatic >>> Fog lights, halogen LH9 LED headlights LH6 Protective grille for taillights Body OS2 Scattolini three-way tipper, side walls aluminum ...

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,895 kg, maximum load weight: 605 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 aluminum flatbed truck with loading crane, immediately available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500kg, payload of the complete vehicle with loading crane and aluminum flatbed approx. 600kg - Manual transmission - Differential lock with limited slip - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500kg with wiring harness (factory-installed) - Heated exterior mirrors - Automatic climate control - Radio preparation - Reversing warning - Auxiliary drive with speed increaser - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum flatbed: - Internal dimensions: 2720mm x 1820mm x 400mm - Floor panel 18mm - Floor frame with airline track all around - Airline track also in the front panel - Aluminum side walls, anodized, with folding step, easily removable - Tool box - Work lights - Other flatbed dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of manufacture: Italy) - Lifting capacity according to manufacturer: Max. 995kg at 3.2m = 815kg, at 4.40m = 575kg, at 5.60m = 400kg, at 6.80m = 300kg, at 8.05m = 220kg - Design according to CE directive (EN 12999) - Swivel range 370° (mechanical swivel range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard chrome-plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs, extendable on both sides, special support, support width 3.10m - Hydraulic support legs, swiveling by 30° and 180° - CE, incl. M.O.L. Gusdpfxeywzygj Ag Teh - Load hook and attachment brackets - Onboard voltage 12V - Electrical modules for Danfoss S800 control block, 4 functions - Danfoss control block S800, 5 functions incl. high-pressure filter - Special support legs, support width 3.10m, 1 piece - Additional cost for shortened support legs (by 80mm) - Mechanical arm extension, lifting capacity 1.30m (7.0k) - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Zinc primer - Switch for work lights near the control block, factory-installed - LED work lights on the knuckle arm, factory-installed - LED for 2 support legs - Optional: Reversing camera with Carplay, shovel holder, 90° rope, ladder carrier / transport frame for front or rear wall, additional storage boxes available. Subject to errors and prior sale. ... Climate control, automatic climate control, VAT can be shown separately, ASR, ABS, trip computer, electric windows front, electric immobilizer, central locking with remote control, trailer coupling, power steering, differential lock, spare wheel, twin tires, cab: short cab, electric windows, work lights, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, emission sticker: 4 - Green, reversing camera

Condition: new, Year of construction: 2025, Complete compact vertical packaging system including 10-head multihead weighing unit (2.5 l/head), z conveyor, platform, outfeed conveyor and rotary table for finished products. Suitable for packing of bulk materials with irregular shape such as potato chips, cornflakes, biscuits, peanuts, sweets, shrimps, industrial parts in general such as screws, nails, metal or plastic components etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German etc. ),date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing – vacuum is not generated), supporting device of finished bags, euro hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 5000ml; film width: max. 620mm; bag size (mm): min.-max. L(80-400)xW(180-300); max. speed of the machine in neutral: 45 cycles/min; stainless steel 304; 220V, 5kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1780x1850x1950mm; machine weight: 700kg. The weighing unit is equipped with 10 weighing heads (2.5l/head) for high weight accuracy and also controlled with PLC (via touchscreen, also in different languages available). 99 programs can be preset, step motor can be set according to different products. - Specification: Hopper capacity: 2.5l; weighing range: 10~3000g; accuracy: ±0.1~2g (depending on product); max. speed of the machine in neutral: 60 cycles/min; stainless steel 304; 220V, 1.5kW; dimensions of the weighing unit LxWxH: approx. 1600x1136x1484mm; machine weight: 500kg. - Specifications of the Z conveyor (automatic transport of the material to the weighing unit): Dimensions depending on customer needs (normal height 3.6m); conveying capacity: 3-6m³/h; 380V, 0.75kW; gross weight 500kg. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Rotary table to collect finished bags from outfeed conveyor. Speed is adjustable. Diameter of table: 1200mm (standard); stainless steel 304; 220V, 0.37kW. Stainless steel platform, required to get access to the weighing unit and upper part of packaging machine, dimensions LxWxH: approx. 2x2x2m. Total dimensions of complete system approximately L3200xW3200xH3600mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. Gedpfx Agsv Nmi Es Touh

Condition: new, Year of construction: 2025, Complete compact vertical packaging system including volumetric dosing unit, 1 cup, single bucket conveyor and outfeed conveyor. Suitable for granulate-type products such as sugar, rice, beans, nuts, etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German etc. ),date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, supporting device of finished bags, hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 5000ml; film width: max. 620mm; bag size (mm): min.-max. L(80-400)xW(180-300); max. speed of the machine in neutral: 45 cycles/min; stainless steel 304; 220V, 5kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1780x1850x1950mm; machine weight: 700kg. Capacity of dosing hopper is up to 50l. Single bucket conveyor has a material capacity up to 50l. The container is filled manually in the bottom position. In the top position it will be emptied automatically (complete cycle: 1 minute). - Specifications: height 3-5m; 220V, 1kW; stainless steel, dimensions: L1400xW700xH3500mm. Generally it has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules are possible. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Deviations possible. Total dimensions of complete system approximately L1780xW5100xH3500mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Godev Nmkiopfx Ag Tsuh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 2014, Spänex SMU 6000.1 Extraction diameter: 300 mm Gsdpfexlk Tvex Ag Touh Motor power: 7.5 kW H3 tested 2 bins of 165 l each Space requirement: 2710 x 900 x 1965 mm Price: 10,000.- Condition: Function tested

Condition: good (used), Safety controller, safety relays, standard master device Guodpex T A Nbofx Ag Tsh -Manufacturer: REER, Standard Master Device, 8 inputs, 2 OSSD pairs (SIL 3) -Type: MOSAIC M1 -Charge: -Number: 1x Relays available -Dimensions: 110/25/H115 mm -Weight: 0.2 kg

Condition: good (used), Sensor Module, Incremental Encoder, Encoder Relay Unit, Encoder Unit -Manufacturer: Keyence, Encoder Unit -Type: CA-EN100U -Dimensions: 130/55/H30 mm Guedpfxex Sv Iho Ag Teh -Weight: 0.1 kg

Condition: used, mileage: 52,100 km, power: 125 kW (169.95 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: mechanical, suspension: steel, total width: 2,345 mm, total height: 2,280 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, soot filter, E07 Hill-start assist, F2W Winter package, 055 AEJ X4/2, 502 Digital extra: Updates for intelligent speed assistant, 805 AEJ X4/1, A50 Front axle with increased load capacity, B25 Parking brake, electric, BA3 Active brake assist, BH8 Control code for hydraulic unit variant 7, BK3 Control code for wheel brake configuration 3, C6L Multifunction steering wheel, CB7 Stabilization level I, CL1 Steering wheel adjustable in height and tilt, CT1 Vibration damper, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1U USB socket 5 V, E2A Connection for special signals in the cockpit, E2I Auxiliary battery for retrofitted consumers, interior, E30 Battery main switch, single-pole, E36 Separating relay for battery additionally, E46 Socket in the cab, E4S Digital extra: Smartphone integration, E57 Electrical system for trailer socket, E7M MBUX multimedia system, ED4 AGM battery 12 V 92 Ah, ED8 Pre-installation electrical system, parameterizable special module, ES0 Jump start - contact, ES5 Charging package, instrument panel, EW6 Digital extra: Remote Services Plus, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F68 Exterior mirrors, heated and electrically adjustable, FF5 Storage compartment above the windshield, FG8 Cupholder in front, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under the cockpit, FM3 WET WIPER SYSTEM, FR7 Pre-installation electrical system for reversing assist, FU5 Exterior mirrors without indicator, FZ5 Anti-theft and burglary alarm system, GD8 6-speed manual gearbox ECO Gear, H15 Seat heating for front passenger, H16 Seat heating for driver, H21 Thermally insulated glass with band filter on the windshield, HH9 Semi-automatic controlled TEMPMATIC air conditioning, HI1 Climate zone 1 (cold/comfort), IF3 Chassis with cab, IG5 Basic, IH1 Head unit Euro., We are available by phone from Monday to Friday until 8:00 PM and on Saturdays until 4:00 PM!! More:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage Gjdpsz Abm Iofx Ag Tjuh

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension - Lübbering flat-head gearhead for tight/difficult-to-access screw locations • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) • Year of construction: 2005 • Machine no.: 0197/02 • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A • Operating pressure: 6 bar • Total weight: approx. 3,500 kg • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: Gjdpfx Agjzzp Tto Teuh • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.