Used Metal Shears for sale (35,803)

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm Bsdpjg U Uv Rsfx Abbjdk -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Year of construction: 2017, condition: good (used), Loma IQ3+E Metal detector checkweigher 2017, Stainless, overall belt dimensions 1600mm x 330mm, aperture 450mm L x 225mm W, AIC checkweigher 250g -3500Kgs, mobile, 1Ph Bdjdoual Amjpfx Abbsk

Condition: good (used), functionality: fully functional, 1 x Technofour Electronics (P) Ltd metal detector with audible alarm and belt stop reject system, on painted frame with height adjustable feet. Aperture dimensions - 400mm wide x 180mm height. Bjdpfxowuvd Ie Abbodk Belt - neoprene, 1500mm long x 400mm wide. Condition - good, runs and detects.

Condition: used, functionality: fully functional, Year of construction: 1982, machine/vehicle number: B6141, sheet thickness steel (max.): 6 mm, back gauge travel distance R-axis: 1,000 mm, input voltage: 380 V, overall weight: 4,200 kg, total length: 2,870 mm, total width: 2,340 mm, total height: 1,930 mm, cutting length (max.): 2,050 mm, Equipment: documentation/manual, SAFAN VS 205-6 Shear – Good general condition We are offering a SAFAN VS 205-6 shear, built in 1982, in good working order. ✅ Machine tested and inspected by us ✅ Documentation included with the machine ✅ Available immediately, subject to prior sale 📦 Price displayed excluding taxes 🚚 For any collection, delivery, or commissioning requests, please contact us. Bjdowc Tm Njpfx Abbedk 🔹 LMIR – Your partner in industrial machine tools 🔹

Condition: new, Center length ----- 2000 mm Center height ----- 280 mm Turning diameter ----- 560 mm Passage of main spindle ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 KW INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOC3 with 4 baffles * Rapid traverse X,Y * Electric brake * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Fixture plate Bjdpfx Absga Tvpjbjdk * Fixed and moving goggles * LED working light * Cooling system * Box with various tools

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x stacking box, II.choice Manufacturer: SSI Schäfer Bdodohm Sllopfx Abbjk Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Bdjdpfxohk Df De Abbjk Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Type Peddycut 275 Year of manufacture 1987 Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Bjdowfdbpspfx Abbjdk Square bar 25 mm Knife pitch 175 mm Punch stroke 24 mm Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Foot switch Various punches Transport: from site

Condition: excellent (used), functionality: fully functional, 1 x Cintex Sentry twin-head metal detector with alarm and belt stop-on-detect reject system. Suitable for detecting metal in frozen and bakery product packs that contain foil. This machine features a high-frequency standard head with a Ferrous-in-Foil head being able to take larger trays or boxes. Technical specification ⚙️ Bsdpfx Ajv Rxgfobbodk ✅ Aperture dimensions - 500mm wide x 180mm high (150mm useable). ✅ Modular belt - intralox, measuring 2350mm long. ✅ Overall dimensions - 2350mm long x 1150mm wide. ✅ Working height - 830mm (adjustable). Condition ✳️ Very good, ready for production. Has been fitted with new motor guard and fully re-wired.

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand SIEMENS Model SIMATIC HMI Main Drive Number of axis 3 Bdodpoxz H Smofx Abbek Additional Equipment Includes tube and mandrel rod support. Bending mandrel is hydraulically extendable with a programmable pre-release. Bending mandrel has automatic minimal quantity lubrication. Oil cooler equipped. This 3-axis TRACTO-TECHNIK Tubotron 30 CNC was manufactured in 2008. It features a programmable sequence control, Simatic Panel PC 677 for menu navigation, and manual or automatic operation modes. The machine includes a free-standing bending head, hydraulic pipe clamping, and a hydraulic long-neck chuck for precise positioning. Ideal for high-quality bending operations. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Year of construction: 2019, condition: good (used), Cassel Shark 2 Metal Detector The METAL SHARK is used free-standing or combined with conveyor belts. Using 3D detection technology, it detects the smallest magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminum etc.) precisely and reliably even under difficult conditions. The robust, closed stainless steel housing is stable and easy to clean – ideally suited to the meat industry. Reliably detects metals in raw or frozen meat in standardized E2 boxes Especially high sensitivity with moist or frozen products with 3D detection Easy setup and intuitive operation with Autocalibration and TeachAssistant Maintenance-free design with automatic and continuous calibration of detector coils Manufacturer: Cassel Model: Shark 2 BD Bdsdpfx Asxyw N Tebbsk Year: 2019 Power: 0,75kW Aperture LxW: 385x260 mm Material: Stainless Steel

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x closing lid, II choice Manufacturer: SSI Schäfer lid type: VD-14/6-A suitable for stacking box SSI Schaefer 14/6-A Material color: green Material: steel, lacquered Dimensions: approx. 520x320x35 mm (LxWxH) own weight: approx. 2,481 kg 4 pull locks Bsdehr I I Nspfx Abbodk General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, Year of construction: 2025, Optimum Metal Band Saw OPTIsaw S 275NV Metal band saws with pivoting saw frame. S 275NV with continuously adjustable saw blade speed Bdedsgx T I Uspfx Abbok Item number: 3300265 TECHNICAL DATA Dimensions and weights Length (product) approx. 1400 mm Width/Depth (product) approx. 685 mm Weight (net) approx. 185 kg Max. width/depth (product) approx. 985 mm Max. height (product) approx. 1700 mm Electrical data Drive motor power: 1.5 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine data Saw blade speed(s): 20 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: continuously variable Adjustable Manual saw frame lifting Cutting ranges Cutting range 0° round (solid material) 225 mm Cutting range 0° square (solid material) 190 mm Cutting range 0° rectangular horizontal (solid material) 150 x 245 mm Cutting range +45° round (solid material) 145 mm Cutting range +45° square (solid material) 150 mm Cutting range +45° rectangular horizontal (solid material) 190 x 150 mm Cutting range +60° round (solid material) 90 mm Cutting range +60° square (solid material) 90 mm Cutting range +60° rectangular horizontal (solid material) 120 x 90 mm Explanation of cutting range: Cutting range determined based on the weight of the saw frame with aluminum. May vary depending on the material used and may be smaller (not cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: From stock 54634 Bitburg - available immediately -

Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. material pass-through: 1,520 mm Bdedpfoxuu Dkox Abbek Workpiece thickness: 1–100 mm Feed rate: 0.5–4.0 m/min, steplessly adjustable Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS brush module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed table, LxWxHxWork width x Sheet thickness: 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge/ belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module - Power Electric Air pressure Extraction m³/h Weight 16 32 6/80 bar 2,500/25 400 kg Brushing module - 12 24 6/80 2,500/725 1,600 kg Rotor module - 20 40 6/10 4,500/25 1,800 kg Discharge module - 1 2 - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless) Working height: 1,000 mm The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. EC Declaration of Conformity Dust collector is not included, but we can offer a suitable unit as an option. Operating manual included. The machine is sold without infeed roller conveyor!

Condition: ready for operation (used), cutting angle (max.): 45 °, sheet thickness steel (max.): 25 mm, total length: 4,500 mm, total width: 2,800 mm, empty load weight: 30,000 kg, workpiece length (max.): 3,100 mm, passage width: 2,800 mm, throat depth: 400 mm, + 2nd for chamfering the cutted plate (45°) double option: first cut = normal cut / second cut = angled cut for welding Backgauge: (2) 1000 mm Courant needed: 380 V Bdjdpfx Abjxuwy Iobsk Height: 3200 + 560mm

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminals available -Price: per piece Bdodexxl Hqjpfx Abbek -Weight: 28 kg/piece

Condition: good (used), Cassel Metal Shark metal detector Bjdpfxsvzw Dqe Abbsdk If metal is detected the outfeed belt will open (see the video). The throughput of the head is 15cm in height and 65cm in width. Machine Dimensions LxWxH: 1.700x1.300x2.250 mm

Condition: good (used), The scope of delivery includes: 01x stacking container, used Manufacturer: SSI Schäfer Material color: hot-dip galvanized Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm Usable width: approx. 770 mm Total height: approx. 670 mm (floor - OK crane eye) Frame height: approx. 605 mm Useful height: approx. 470 mm Underride height: approx. 105 mm Total depth: approx. 550 mm (outside - outside) Bdsdpfsnabqlsx Abbek Frame depth: approx. 500 mm Useful depth: approx. 490 mm Further technical data of the stacking container: Weight / pcs.: approx. 37,000 kg load: maximum 0,8 t stackable: yes (stacking factor: 1+5) crane eyes: 4 pieces diameter of crane eyes: approx. 36 mm Remark: The stacking containers may be bent. Furthermore, they may have dents or other damages. other damages. Usage: The stacking containers are suitable due to your robustness especially for the workshop or transport. Due to the catch corners and reinforced feet a safe stacking is given. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), functionality: fully functional, We are looking for company liquidations of sheet metal processing machines Bdedpjvzl H Tsfx Abbjk

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are 80x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered Bdsdpfx Ajhm Sltjbbok round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 05x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: Bdedpfx Ashm Slpobbok (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 03x stacking container, used Manufacturer: Thyssen Material color: hot-dip galvanized Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm useful width: approx. 780 mm Bdsdpfx Abom Sgmyebek Total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Useful height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outside - outside) Frame depth: approx. 480 mm Useful depth: approx. 400 mm stackable: yes crane eyes: 4 pieces diameter of crane eyes: approx. 40 mm Remark: The stacking or transport containers may be bent. Furthermore, they may have dents or other damages. other damages.

Condition: used, The scope of delivery includes: 01x stacking container, used Material color: hot-dip galvanized Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm usable width: approx. 780 mm Total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Useful height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outside - outside) Frame depth: approx. 480 mm Useful depth: approx. 400 mm stackable: yes Bedpfx Aok Nlppobbedk crane eyes: 4 pieces diameter of crane eyes: approx. 40 mm Remark: The stacking or transport containers may be bent. Furthermore, they may have dents or other damages. other damages. The above price refers to the Pickup price per piece!

Condition: excellent (used), The scope of delivery includes: 01x lattice box, used Length: approx. 820 mm Depth: approx. 420 mm Height: approx. 420 mm Material: steel Material color: galvanized Bjdpfx Aemnnvaebbjdk Wire Ø: approx. 4.50 mm Mesh width: approx. 54 x 54 mm Stackable: yes Stacking edge: 30 x 18 mm (W x H) Inner height: front approx. 185 mm | rear: approx. 390 mm Weight / piece: approx. 15.74 kg Note: half open in width Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Included in delivery: 03x stacking container, used Manufacturer: SSI Schäfer Material color: hot-dip galvanized Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm Usable width: approx. 770 mm Total height: approx. 670 mm (floor - OK crane eye) Frame height: approx. 605 mm Useful height: approx. 470 mm Underride height: approx. 105 mm Total depth: approx. 550 mm (outside - outside) Frame depth: approx. 500 mm Useful depth: approx. 490 mm Further technical data of the stacking container: Weight / pcs.: approx. 37,000 kg load: maximum 0,8 t stackable: yes (stacking factor: 1+5) crane eyes: 4 pieces diameter of crane eyes: approx. 36 mm Remark: The stacking containers may be bent. Furthermore, they may have dents or other damages. other damages. Usage: The stacking containers are suitable due to your robustness especially for the workshop or transport. Due to the catch corners and reinforced feet a safe stacking is given. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Bdsdpfx Aonabz Sebbek General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.