Used Mep Shark 320 for sale (135)

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm speeds 15 / 30 / 45 / 90 U/min Bjdoyvvpmspfx Afmsww power requirement 1,8 / 2,6 kW kW

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Bodsuwrv Dspfx Afmoww

Condition: used, Year of construction: 1995, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm stroke 100 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min total power requirement 2,6 kW Bodpfovxlpvox Afmoww weight of the machine ca. 375 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm Bwodpfxszrpl De Afmsw - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: used, Max. saw blade diameter: 350 mm Semi-automatic saw feed 2 sawing speeds Submitted for cutting of stainless steel Coolant lubrication Bwodpfxjz Hx Eto Afmjw

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm Bwedpfx Aol R Nnnofmsw turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Year of construction: 1998, condition: good (used), machine/vehicle number: 080024-38 U, Offer 23332 Bedpfjp Ebn Sjx Afmjww Technical data: - Saw blade dimension 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - cutting range at 90° round 80 mm - flat 95 x 60 mm - miter adjustable up to 45 ° - Material vice - Drive 400 V / 0,5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Condition: used, Year of construction: 1990, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm Bwjdpfswvl E Rox Afmsw capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min total power requirement 2,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base

Condition: good (used), Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw Bjdpfx Afsxlzytsmeww -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Year of construction: 2002, condition: good (used), MEP CONDOR 90 CNC MR automatic CNC-controlled miter saw for cutting aluminum profiles, with automatic feed. Bwsdpoikztpjfx Afmjw Used, in excellent condition.

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: Bwoded Aai Tepfx Afmjw - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: U/min - Cutting range: - at 90° (round): 90 mm - or (square): 80 mm - Pneumatic clamping cylinders - Material feed system with positioning control - Single stroke up to approx. 1000 mm - Multiple strokes - Swiveling arm with control panel and CNC control MEP - Motorized dust extraction and chip extraction, mobile unit - Drive: 400 V / 1.1 kW - Space required: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Condition: new, dimensions of saw-blade 350x32x4 mm Bedpfx Ajy Dh Nnsfmjww vice 180 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 2,2 kw weight 225 kg

Condition: new, saw blade diameter 350 x 32 x 2,5 mm 15/30/45/90 U/min vice 190 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm Bodeyv Nl Ispfx Afmoww capacity 90 degrees: flat 180x95 mm 90 mm 90 mm 110 mm 95 mm 125x95 mm 110 mm 95 mm 125x95 mm total power requirement 1,8/2,5 kW weight 410 kg

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,210 t dimensions 0,9 x 1,4 x 1,4 m Manual circular saw machine for sawing aluminum, miter cuts Bwjdpfx Afsfc T Ufsmow 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm

Condition: used, saw blade diameter 350 mm Bedpfx Afjfc T Ugsmeww capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,285 t dimensions 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left.

Condition: new, dimensions of saw-blade 350 x 32 x 3,4 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 1,5/2,2 kw weight 280 kg Bedpfxjyv Nqqe Afmjww

Condition: good (used), Radial fan, chip extraction fan, fan, extraction, dust extraction system, chip blower, extraction system -Manufacturer: MEP, extraction system with transport frame -Type: unfortunately without type designation -Motor: Cantoni 0.75 kW / 2840 rpm -Base: on wheels -Dimensions: 950/480/H1860 mm Bwsdpfx Afeh Szaremew -Weight: 40 kg

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP NC Bodpfxexaa Hnj Afmeww total power requirement 1.5 / 2.2 kW weight of the machine ca. 290 kg range L-W-H 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment Bwsdpfx Afofmck Homew a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 10/95 mm capacity 45 degrees: flat 135x60 mm engine 2,5 0 1700 / 3400 U/min weight of the machine ca. 600 kg dimensions 2,0 x 1,5 x 1,7 m Bwsdpfxjfg Rlgj Afmow COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, for sawing of aluminum and light metal alloys for the use of HM circular saw blades. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw machines with the new one specially designed by MEP for Automatic machines developed, Windows “CE” based control

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Bedpfx Afsfgpdlsmoww Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 15 - 150 U/min total power requirement 5,5 kW weight of the machine ca. 0,615 t dimensions of the machine ca. 1,4 x 1,4 x 2,0 m Bedpefg Rldefx Afmsww Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. Basic equipment: •Saw head slides on recirculating ball linear double guides •Three-stage gearbox •continuously variable speeds 15-150 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 370x32x3 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness Bodpfxjfg Rlcj Afmsww different cutting programs, each with a different cutting length and number of pieces program.

Condition: new, Model Name PH 261-1 HB Bjdpsl H Dydefx Afmsww

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Bwjdpefg Rlbefx Afmew Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis