Used Mechanical Press for sale (18,152)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 500 t, table width: 1,500 mm, table length: 2,000 mm, oil tank capacity: 1,200 l, total length: 3,500 mm, total width: 2,400 mm, total height: 6,000 mm, overall weight: 45,000 kg, installation height: 1,000 mm, Equipment: safety light barrier, HIDROLIKSAN HCFP – 500-ton Hydraulic Tryout/Testing Press for Toolmaking and Forming Technology The machine is a tryout/testing press for tools in the field of forming, deep drawing and toolmaking. It is fully functional, ready for operation and can be inspected and tested while powered on. The press frame consists of a 4-column construction, a generous working area and a hydraulic system with REXROTH pump technology. The control system is a SIEMENS S7-1200 with a touch panel and extensive parameterization options. Scope of delivery & Accessories Tool sliding and lifting ball system GÜTHLE Hydraulic foot pedal (GÜTHLE) Roller bolster/carrier console 10 t (GÜTHLE) 4-channel tool clamping system (length 1500 mm, 2 t per channel) Complete REXROTH hydraulic unit Air cooler Condition of the machine Fully functional Hydraulic system is leak-free and runs smoothly Control system & electrical components in good condition Mechanically sound, no visible damage The machine is in assembled condition and can be demonstrated while powered on. Press force: Nominal force: 500 t Max. press force at 250 bar: approx. 510 t Dimensions & Weight: Overall dimensions approx.: 3500 × 2400 × 6000 mm Total weight: approx. 45,000 kg Working area: Table area: 2000 × 1500 mm Column spacing (internal): 2000 × 900 mm Installation height: 1000 mm Stroke: 800 mm (linearly adjustable via linear measuring system) T-slots available (mounting positions to be defined by customer) Hydraulic system: Main cylinder Number: 2 Piston Ø: 340 mm Rod Ø: 280 mm Auxiliary/planing cylinder Number: 2 Piston Ø: 120 mm Rod Ø: 70 mm Draw cushion Lajdsx D Tv Djpfx Aklog Force: 150 t Cylinder: 2 × Ø 310 × 210 mm Stroke: 400 mm Pumps and tank Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min Hydraulic tank: 1200 L Oil system: 1000 L filling capacity Speeds Forward stroke: 120 mm/s Return stroke: 150 mm/s Working/pressure stroke: 12 mm/s Control & Safety: Control system SIEMENS S7-1200 + ET200S 12" Touch Panel Schneider Electric Operating modes: Two-hand automatic mode Setup mode Single stroke Stroke without draw cushion Deep drawing mode with draw cushion Measuring & safety components Linear measuring system Novatechnik (63 Bit) for ram and draw cushion Light barriers SICK at the front and rear (height: 1050 mm) Side protective grilles with limit switches Remote maintenance via Ethernet possible Mobile control panel International Note Block (DE/EN) German Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel or loading assistance. Collection only by prior appointment. English Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony/ Germany

Condition: used, Year of construction: 2011, functionality: fully functional, operating hours: 1,000 h, input voltage: 380 V, type of input current: three-phase, pressing force: 1,200 t, stroke length: 600 mm, table width: 3,000 mm, table length: 2,000 mm, table height: 700 mm, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 700 mm, oil tank capacity: 700 l, total length: 2,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 60,000 kg, control cabinet height: 2,000 mm, control cabinet width: 400 mm, distance between stands: 2,200 mm, Equipment: safety light barrier, H-frame, 4 columns, daylight 700 mm, stroke 600 mm, distance between columns 2200 mm x 1260 mm, dimensions (LxWxH) 3000x2000x4200 mm, 380V-15kW, weight 60,000 kg Lajdpjxn Rvcefx Akljg

Condition: new, Year of construction: 2026, Exceptional special price, as it was used at our in-house trade fair. Operating hours: 2 Immediately available – subject to prior sale. First come, first served. Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Lodpslht H Ejfx Akleag Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated jaws Pre-compactor with end-position dampened cylinder and bolted cover Switchgear with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: new, Year of construction: 2022, functionality: fully functional, Table size: 600 x 900 mm Maximum pressing force: 800 kN Stroke length: 0–110 mm Maximum tool size: 400 x 580 mm Motor power: 7.5 kW Voltage: 380 V Weight: 5700 kg Dimensions L x W x H = 1600 x 1500 x 2750 mm Accessories, Equipment - Oil-bath gearbox - Pneumatic clutch-brake combination - PLC control for safety Ljdsyr Nv Rspfx Akleag - Photoelectric sensors - Motorized adjustable slide - Mechanical overload protection - Two-foot and hand pedal control - Adjustable stroke (inverter) - Automatic central lubrication

Condition: used, Year of construction: 2020, functionality: fully functional, pressing force: 120 t, filling opening width: 2,000 mm, filling opening length: 1,000 mm, bale width: 750 mm, bale height: 1,100 mm, total width: 2,835 mm, total height: 4,374 mm, total length: 19,627 mm, overall weight: 43,000 kg, warranty duration: 12 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, For sale is a baling press, model "HP-G 4 120 VG6," manufactured in 2020, featuring a 6-strand vertical PP twine tying system. The pictures show the machine in its assembled condition. It is now located at our facility in Lathen. The press is sold without a conveyor belt. Laodpfozhudqjx Akleg Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of the relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, slide guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open Ljdpfxsdzqlto Akloag - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Lodpfx Aez Aagaokljag Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure Ljdjzt H U Espfx Aklsag

Condition: used, Single-column eccentric press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Very little used eccentric press in original condition Machine no. 5250686 Year of manufacture 1986, like new condition Pressing force 60 tons Stroke 280 mm Table area 740 x 560 mm Ram area 385 x 200 mm Die opening in the table 300 x 200 mm Table area, table insert plate 740 x 560 mm Die opening in table insert plate Ø 103 mm Thickness of table insert plate 70 mm Dowel hole 40 mm Table height above floor 815 mm (with table insert plate) Installation height max. 275 (with table insert plate) Installation height max. 345 (without table insert plate) Stroke adjustment 10-90 mm Ram adjustment 60 mm Stroke rate 100 strokes/min Motor power 3 kW Drive power 380 Volt, 50 Hz - mechanical eccentric coupling with pneumatic control - spring-loaded brake controlled via cam - stroke release via pneumatic foot switch Lajdei A A Tbopfx Akleg - overload protection with shear plate in the ram - table height adjustment via 2 threaded spindles - manual central lubrication system BEKA - operating manual and pneumatic diagram available Space requirement L x W x H 1400 x 1100 x 2200 mm Weight 3.4 tons very good condition, like new

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 380 A, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table length: 1,320 mm, table height: 290 mm, throat depth: 180 mm, ram plate length: 500 mm, clearance between the columns: 900 mm, retraction force: 40 t, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,500 kg, controller model: Estun NC E21, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. Ljdpfxjzlqkus Aklsag The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 65/2/158/02, functionality: fully functional, pressing force: 65 t, stroke length: 120 mm, table length: 580 mm, throat depth: 280 mm, total width: 820 mm, punching force: 65 t, Used 65ton mechanical power press for sale Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 NOMINAL FORCE (Max stroke) 650 [ KN] MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] Lodpfoxqn Unox Akljag MAX TOP TOOL WEIGHT 136 [ daN]

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 131 644, overall weight: 14,000 kg, total height: 3,550 mm, type of input current: three-phase, total length: 3,400 mm, total width: 2,000 mm, input voltage: 400 V, control voltage: 24 V, distance between side stands: 400 mm, distance between stands: 1,080 mm, year of last overhaul: 2026, Attention: machine has been 2022 completely mechanically and electrically retrofitted before delivery press force: 1000kN stroke: 30 - 100mm Laodpfx Aksfn Affjleg slide adjustment: 80mm speed: 50 - 300/min shut height. 350mm table dimensions: 1080 x 800mm slide dimensions: 900 x 620mm new electrical controller SIEMENS S7 1500

Condition: new, Year of construction: 2026, pressing force: 100 t, DURENDUS 100 T Workshop Press – Single Column Press – 1,000 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered to a customer as a custom order. We can supply you with this machine from stock or manufacture it new – with pleasure, also taking into account specific individual options. This is a hydraulic workshop press suitable for pressing, straightening, and assembly operations in workshop and industrial settings. Base price: €5,990 net Options (on request): The listed options are based on completed customer projects and allow targeted customization of the machine for each specific application. The base machine is a functional standard version – in practice, it is often equipped with additional features and configured project-specific. - Table plate with X-shaped T-slot 650 × 900 × 90 mm - Pressure adjustment Ljdpfx Aoy Hqqaskleag - Lateral displacement of the press ram (700 mm) - Bending tool - Anti-rotation cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling ===== Technical Data + Information: ==== General Information Design: Workshop press Press force: 100 t (optionally adjustable) Total weight: approx. 900 kg Dimensions (W × D × H): 1,600 × 900 × 2,550 mm ==== Working Area Clear width: 1,000 mm Open depth: 350 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,000 / 620 mm Ram stroke: 400 mm Cylinder diameter: Ø 190 mm Piston rod: Ø 115 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8.5 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump capacity: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable crossbeams with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-layer coating according to RAL ===== Pressing, pressing-out, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed the Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety standard NR 12, which is based on these. Our core strength is custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulic systems mainly use components from leading European manufacturers.

Year of construction: 2021, condition: excellent (used), For sale: Metal Stamping Press ALP-25J (25T, 2021) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping a wide range of metal components. Technical specifications: Nominal capacity: 25 T Stroke: 100 mm Stroke rate: 100 strokes/min (SPM) Max. die height: 260 mm Laedpfxexm U S Se Akljg Height adjustment: 55 mm Ram working area: 560 × 370 mm Bolster area: 250 × 220 mm Country of origin: China Applications: The ALP-25J press is suitable for: - Stamping, cutting, bending, and forming metal components - Small press operations in tool, metal structure, and automotive part manufacturing - Working with thin and medium-thickness sheet metal If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Laodoywztgepfx Akljg Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Lajdpfx Ajzzkwgjkljg Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: new, Year of construction: 2026, pressing force: 200 t, DURENDUS 200 T Workshop Press – Single-column Press – 1,500 mm Clear Width, 400 mm Stroke The machine shown here has already been manufactured and delivered to a customer as a custom order. We can manufacture this machine for you on short notice – gladly incorporating individual options as required. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshops and industrial applications. Base price: €10,750 net Options (on request): The options listed are based on realized customer projects and allow for targeted adaptation of the machine to the specific application. The basic machine is a functional standard version; in practice, it is usually upgraded with additional equipment and project-specific configurations. - Table plate with X-shaped T-slot 800 × 1,200 × 120 mm - Pressure setting - Lateral movement of the press ram (1,000 mm) - Bending tool - Anti-rotation cylinder with manual travel adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling ===== Technical Data & Information: ==== General Information Type: Workshop press Press force: 200 t (optionally adjustable) Total weight: approx. 2,100 kg Overall dimensions (W × D × H): 2,000 × 900 × 2,750 mm ==== Working Area Clear width: 1,500 mm Clear depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Transverse beam usable width: 1,500 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 280 mm Piston rod: Ø 165 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 7.4 mm/s Return speed: 11.4 mm/s ==== Hydraulics & Drive Pump capacity: 24.5 l/min Motor rating: 7.5 kW Laedpfoy H Ddmex Akljg Hydraulic tank: 54 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 8 kW ==== Equipment Height-adjustable crossbeam with bolt locking Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Two-coat painting according to RAL ===== Pressing, extracting, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a personalized quote. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements by fully complying with the national Brazilian safety standard NR 12, which builds upon these. Our main strength lies in the design and automation of custom presses. We offer bespoke hydraulic presses at surprisingly competitive prices. Our presses are fitted predominantly with components from leading European manufacturers.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Lodpez Duvvefx Akloag Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes Ljdpfx Akexuwanoleag 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: new, Year of construction: 2025, functionality: fully functional, Pressure: 125 t Bending length: 3000 mm Frame width: 3100 mm Control unit: Cybelec VisiTouch 24MX Stroke: 300 mm Installation height: 500 mm Rapid traverse down: 200 mm/s Bending speed: 0–12 mm/s Total power requirement: 15 kW Machine weight approx.: 11,500 kg Dimensions: 4080 x 3110 x 1800 mm Standard equipment: Basic configuration: - CNC control Cybelec CybTouch 15 - Axes: Y1–Y2–X–R - Fully dynamic crowning system - System for compensating frame deflection – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor Ledpfx Aksx Sq Hljlsag - LED display at the press beam for visualizing positioning of the backgauge - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliant - Upper and lower tool clamping PROMECAM system, mechanical

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. Lodpfx Aswyc H Tskleag General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Ljdpfx Aksr I E Itoloag Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 80 t, stroke length: 300 mm, table width: 800 mm, table length: 600 mm, throat depth: 330 mm, EXNER hydraulic single-column press, NEW, EEX SL 80 series Lasdszcwrnjpfx Akljg Pressing force: 800 kN Mechanical depth stop Control system: Siemens S7 - 1500 Installation height: 450 mm Stroke: 300 mm Table dimensions: 800 x 600 mm

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m Lasdpfx Aju Nfiboklsg dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: ready for operation (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Year of manufacture: 2016 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Ledpoz Dtrpsfx Akloag Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video available upon request.