Used Mchale F 550 for sale (35,482)

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 Conveyor length middle radius (NL): 1703 mm frame width (NB): 775 mm belt width (GuB): 550 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 85° degrees (coiled 175mm rising) Incline: 175 mm / 85° = 741,2 mm / 360° Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Cgedpfxok Abfbo Afnen Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Cedpek Abuisfx Afnegn Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Cgsdsmqty Uopfx Afnsn Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 Cjdjk Abcgepfx Afnjgn RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support feet and Lateral guides on both sides optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Csdpfx Afek Aa Uksnsgn

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Cgsdpfx Ajk Abcrofnon Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 Cgjdpfx Asmqty Refnon frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Cgjdpfxek Aba To Afnen

Condition: used, Year of construction: 2000, Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Cedpfsk Ablpjx Afnjgn Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter between 0,032 and 1,17m/s, Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2000 Scope of delivery: without supports Optionally available: Supports Side guide one- and both sideds Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame width (NB): 750 mm Cedpfx Afjk Aa T Rjnsgn belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 belt: double layer, green, smooth Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (V m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Cedpfxok Aa T Ho Afnsgn Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2013, operating hours: 13,600 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, Linde H25T-02 Triplex 550 Freelift / Sideshift / Fork Positioner LPG 2013 Codpfx Asx Hlhgsfnegn Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. maintains a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and under AS-IS conditions without warranties (see our general terms and conditions). For viewing and/or a test drive, you are welcome to make a non-binding appointment. Please call in advance as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2014, operating hours: 5,835 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, Linde H25D-02 Triplex 550 Freelift / Sideshift / 4th function VW Diesel 2014 Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. offers a variable stock of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Cedpfx Afex Hk U Sjnsgn 5391 LR Nuland

Condition: excellent (used), Year of construction: 2024, operating hours: 279 h, functionality: fully functional, cutting length (max.): 3,200 mm, Well-maintained Format 4 Kappa 550 panel saw, acquired in 2024 as a refurbished demonstration unit. The machine’s actual year of manufacture is 2017. Equipped with a high-quality feature set. The main saw unit has only 279 operating hours (the scoring unit 22 h). Power: 10 kW Sliding table with X-Roll technology: 3,200 mm Electronically controlled height and tilt adjustment 0°–46° Saw blade diameter 250–550 mm, max. cutting height 202 mm Overhead guard, hood for 90° and hood for angled cuts Cgedpfx Ajx H Tydjfnjn E-motion control 15” color touchscreen display Electronically positioned rip fence with digital readout, cutting width 1250 mm Tools and replacement saw blades (main and scorer) included. #8455

Year of construction: 2021, condition: ready for operation (used), This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. Application Types Sawing (Wood) Cgodpfxjx D Exqs Afnsn

Condition: excellent (used), Felder kappa 550 panel saw, format 4 Sliding table 320 cm, Blade tilt and height adjustment motorized, Right-hand fence motorized adjustable up to 1600 mm, Csdpfx Afox Swzvjnegn Main motor 7.35 kW, Max blade diameter 500 mm Used machine, in very good condition.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 19,981 h, load capacity: 1,300 kg, lifting height: 5,500 mm, free lift: 1,895 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,076 kg, total length: 1,800 mm, drive type: Elektro, construction width: 1,070 mm, Electric 3-wheel forklift Load centre: 500 mm Codpow Hicnjfx Afnegn Fork width: 100 mm Fork thickness: 35 mm ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Triplex Technical condition: good Front tyre type: superelastic Front tyre size: 18x7-8 Front tyre condition: 60 – 80% Rear tyre type: superelastic Rear tyre size: 140/55-9 Rear tyre condition: 60 – 80% Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: Northbatt Battery year: 2025 Battery condition: new Description: New battery Sideshift, 4th valve, front work light,

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 2,164 h, load capacity: 4,990 kg, lifting height: 5,500 mm, free lift: 1,796 mm, fuel type: electric, mast type: triplex, construction height: 2,565 mm, fork carriage width: 1,260 mm, fork length: 1,600 mm, empty load weight: 8,109 kg, total length: 2,812 mm, drive type: Elektro, construction width: 1,450 mm, Electric 4-wheel forklift Load center: 500 mm Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tires type: Non-marking Front tires size: 355/50-15 Front tires condition: 80 - 100% Rear tires type: Non-marking Cgjdpfxsxya Tnj Afnsn Rear tires size: 21x8-9 Rear tires condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2016 Battery condition: 60 - 80% Description: Inspection and UVV (accident prevention inspection) new Side shifter, 3rd valve, 4th valve, rear working lights, front working lights, load guard, full free lift, safety light, safety pilot, non-marking tires, interior mirror, joystick, single-pedal operation, joystick (solo-pilot), comfort seat, hydraulic steering, panoramic rearview mirror, multi-color display, beacon, FloorSport rear and front, reversing warning device

Condition: used, functionality: fully functional, machine/vehicle number: FN5095.., Year of construction: 2016, operating hours: 3,382 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,490 mm, empty load weight: 5,814 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: FN5095.. Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Cgodpfx Afovxxq Tsnjn Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tires condition: 20 - 40% Rear tires type: Superelastic Rear tires condition: 20 - 40% Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: JH Battery type: PzS Battery year of construction: 2016 Battery condition: 60 - 80% Sideshifter, SE tires black, not white as shown in the pictures! 3rd valve, 4th valve, rear working lights, front working lights, roof cover, front windshield, half-cab, full free lift,

Condition: used, mileage: 587,500 km, power: 129 kW (175.39 HP), first registration: 08/2017, fuel type: diesel, overall weight: 7,500 kg, gearing type: automatic, emission class: euro6, Equipment: tail-lift, Tail lift: ----Refrigeration unit: ----- Automatic tail lift – air conditioning – Carrier Supra 550 Cedpfx Afsx Dzqvenjgn Suspension: Leaf suspension

Condition: ready for operation (used), Year of construction: 2005, operating hours: 12,976 h, functionality: fully functional, machine/vehicle number: NSO997, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller model: FANUC Series 30i, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel (X-axis): 750 mm Travel (Z-axis): 800 mm Travel (Y-axis): 850 mm Magazine Positions: 120 Spindle Cgedexqmbgopfx Afnjn Speed Range: 50–15,000 rpm Spindle Diameter (Front Bearing I.D.): 80 mm Spindle Taper: ISO R297 / Taper No. 40 Tool Holder: MAS I Type P40T Table Pallet Size: 550 × 550 mm Max. Rotary Table Swivel Range: 360° Pallet Height: 750 mm Distances Distance Between Spindle Nose and Table Center: 150–1,000 mm Distance Between Spindle Nose and Table Surface: 50–850 mm Feed Rates Rapid Traverse X-, Y-, Z-Axis: 60,000 mm/min Cutting Feed Rate (X-, Y-, Z-Axis): 0.001–30 mm/min Tool Changer (ATC) Number of Tools: 40 Tool Size (Ø × Length): Ø75 × 470 mm Tool Weight: 8.0 kg Tool Change Time (Tool to Tool): 1.3 s Performance Data Positioning Accuracy (X-, Y-, Z-Axis): ±0.003 mm Repeatability (X-, Y-, Z-Axis): ±0.0015 mm Pallet Load Capacity: 800 kg Thrust Force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Footprint: 2,750 × 5,700 mm Machine Weight: 16,000 kg Motors Spindle Drive Motor (15 min rated power): 22 / 18.5 kW Hydraulic Pump Motor: 3.7 (4) kW Operating Hours Machine Running Hours: 12,976 h Control Powered Hours: 112,997 h

Condition: excellent (used), functionality: fully functional, Usable cutting length 4000 mm Cgjdpoxvhiiofx Afnjn Blade diameter 550 mm Electronic head tilting Internal/external tilting from 22°30′ to 135° Labeling machine

Condition: used, mileage: 149,865 km, power: 118 kW (160.44 HP), first registration: 09/2012, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,330 mm, loading space height: 500 mm, Equipment: ABS, crane, electronic stability program (ESP), Iveco ML 75E16 Meiller three-way tipper with a Palfinger crane. 5 + 6 control circuit for grab control. German vehicle from 1st hand, 3 seater and a payload of 2,470 kg - Meiller 3 side tipper - Palfinger PK 4200 - 2x hydraulic extensions - Working height 11 m Cgjdjxxghiopfx Afnsn - 3.40 m ? 990 kg - 4,90 m ? 760 kg - 6,40 m ? 550 kg - 1x mechanical extension - 8,00 m ? 420 kg - 5 + 6 control circuit for grapple control - Radio CD - EURO 6 - Body dimensions - 3,600 length x 2330 width x 500 height - Wheelbase 3,000 mm - Payload 2,470 kg - Financing available through our partner banks, we will be happy to help you. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 15,289 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 121, TECHNICAL DETAILS Travel Paths X-axis travel: 750 mm Y-axis travel: 800 mm Z-axis travel: 850 mm Work Table (axis operated by AC servo motor) Pallet size: 550 x 550 mm Smallest indexing increment: 0.001 degrees Spindle Tool taper: #50 Drive power: 30/22 kW Cjdpexnwq Hjfx Afnegn Spindle speed: 15,000 rpm Tool Magazine Tool stations: 121 tools Magazine type: Chain magazine Specification: BT-50 MACHINE DETAILS Control: FANUC 31i Installation dimensions (L × W × H): approx. 2,780 × 1,500 × 2,300 mm Operating Hours Running time: 15,289 h Control On-Time: 106,856 h EQUIPMENT Coolant system Renishaw infrared tool probe OMP 60 BT 50

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: TRGD 08/5-2.5-550-FcV, input voltage: 230 V, Beinlich Radial Piston Pump in mobile setup Manufacturer: Beinlich pump systems Manufactured: 2008 Viscosity: 100-1000 mPa.s Max pressure: 200 bar. Medium used for: Glycol, Linseed oil, Acrylates Cgedpfx Asxiwg Rsfnsn With Lenze series 8200 vector frequency inverter (adjustable speed) Complete with original manuals and diagrams