Used Mazak Sqt 250 for sale (296)

Condition: ready for operation (used), Year of construction: 2012, Main Drive Number of axis 5 Lrsdex D I Rpepfx Abysu This 5-axis Mazak INTEGREX I-150 turn-mill centre was manufactured in 2012. Consider the opportunity to buy this Mazak INTEGREX I-150 turn-mill centre. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 1,045 mm, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 82 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 1,045 mm, total height: 2,900 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,200 kg, Multi-tasking lathe MAZAK - INTEGREX 200-4 S MACH-ID 9810 Make: MAZAK Type: INTEGREX 200-4 S Control: MAZATROL MATRIX Year: 2010 Lredpfx Abez Ar Ucoysu The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The “S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positioning in one machine. This significantly reduces the number of setups and eliminates the need to move components between separate turning and milling machines. Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1045mm B Axis: 225° Spindle bore: 82mm Speedrange: 5000Rpm Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 82mm Subspindle power:18.5kW ATC / revolver: 80 Speed live tools:12.000Rpm Length: 4500mm Width: 2400mm Height: 2900mm Weight: 9200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Technical Information for Mazak Corporation Mazak VTC-300C II: Model: Mazak VTC-300C II Machine type: Vertical CNC Machining Center Year of manufacture: 2003 Serial number: 162107 Accessories: Chip conveyor included Connected load: 28 kW Typical technical data for the Mazak VTC-300C II: Control: Mazatrol Fusion 640M / Mazatrol PC Fusion CNC Travel distances: X-axis: approx. 1,740 mm, Y-axis: approx. 760 mm, Z-axis: approx. 660 mm Table size: approx. 2,000 × 760 mm Table load capacity: up to approx. 1,400–1,500 kg Spindle taper: CAT 40 / BT40 Spindle speed: typically 10,000 rpm Main spindle power: approx. 18.5–22 kW Tool changer: 30 positions Rapid traverse: approx. 36 m/min Coolant system: included Machine weight: approx. 11,000–13,000 kg The machine is part of Mazak’s large VTC series and is particularly suited for: Large aluminum parts Steel machining Lrjdpsy St E Rjfx Abyju Automotive production Fixture and series manufacturing

Condition: ready for operation (used), Year of construction: 2010, Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Lrsdpfxjx Aunxe Abyou

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 175849, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, controller model: PC Fusion 640 M, total height: 4,450 mm, total length: 3,300 mm, total width: 2,900 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, 3-Axis Machining Center MAZAK - VTC 300C-II Manufacturer: MAZAK Model: VTC 300C-II Control: PC Fusion 640M Year of manufacture: 2005 Internal coolant supply (IKZ): 15 bar Table length: 2000 mm Table width: 760 mm Lodpfeyanuhox Abyeru Feed rate X-axis: 36,000 mm/min Feed rate Y-axis: 36,000 mm/min Feed rate Z-axis: 36,000 mm/min Tool holder: SK 40 Spindle power: 15 kW Spindle speed: 12,000 rpm Tool changer: 30 positions Internal coolant: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling unit: Yes Length: 4450 mm Width: 3300 mm Height: 2900 mm Can be inspected under power.

Condition: ready for operation (used), Year of construction: 2005, A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible. Ledpfxezf Ncco Abysru

Condition: repair required (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 65123, For sale: Mazak QT 10N with Knoll chip conveyor. Lredpfx Ajwn D Nfebyju The machine and chip conveyor are functional, but the X-axis needs to be overhauled and is currently not in operating condition. The price is a fixed price and non-negotiable.

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, Lrodpfx Absu Rb Snoyju spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, swarf conveyor

Condition: ready for operation (used), Year of construction: 1995, operating hours: 138 h, spindle motor power: 26,000 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 1,029 mm, total height: 2,800 mm, total width: 3,180 mm, overall weight: 6,500 kg, controller manufacturer: MAZATROL, controller model: T PLUS, product length (max.): 6,365 mm, number of slots in tool magazine: 20, number of axes: 4, This 4-axis Mazak Integrex 30 Y Universal 1000 was manufactured in 1995. It features a maximum turning diameter over bed of 510 mm and a turning length of 1029 mm. The machine is equipped with a powerful main spindle and a milling spindle, providing versatile machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak Integrex 30 Y Universal 1000 turn-mill centre we have for sale. Contact us for further details. Lrodpfsz Hbv Uex Abysu - Bar Capacity: 64 mm- Max Turning Diameter Over Bed: 510 mm- Turning Diameter Over Slide: 400 mm- Turning Length: 1029 mm- Center Height: 254 mm- Max Load Capacity Chuck: 200 kgf- Max Load Capacity Centers: 1000 kgf- Main Spindle Power: 22 - 26 kW- Min Main Spindle Speed: 35 rpm- Max Main Spindle Speed: 3500 rpm- Rapid Traverse X-axis: 12 m/min- Rapid Traverse Y-axis: 10 m/min- Rapid Traverse Z-axis: 18 m/min- Milling Spindle Power: 7.5 kW- Milling Head Speed: 15 - 6000 rpm- Cylinder Specification: Kitagawa F-1768HS- Chuck Specification (Kitagawa B-10A0815): Max Pressure 2.34 MPa (23.9 kgf/cm²), Max Static Gripping Force 38 kN (3875 kgf), Max Speed 3500 min⁻¹ Included Equipment: Zool Presetter Arm, Chip Conveyor, Coolant System Technical Specification Taper Size SK 40 Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Lodpfxotugggo Abyjru Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Mazak VARIAXIS500-5XII was manufactured in 2006. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 60 positions. The machine has an impressive X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS500-5XII vertical machining centre we have for sale. Contact us for further details. Lrsdpfjzzwnfex Abyju • Outer length: 500 mm • Outer width: 400 mm • Table load: 300 kg • Max distance between vertical spindle and table: 140 - 600 mm • Number of tool slots: 60 positions • Chip conveyor: Belt type (with chip pan preparation) • Cooling pressure: 15 kg • Controlled Axes: 5 continuous • Table Dimensions: 500 x 400 mm (x 2 pallets) • Distance Spindle Nose to Horizontal Table: 190 - 650 mm • Spindle Torque: 252 Nm (186 ) • Operating Hours (Power On): 57,979 hrs 58 min 25 sec • Operating Hours (Auto Cut): 31,273 hrs 09 min 14 sec • Operating Hours (Cutting Time): 27,810 hrs 53 min 42 sec • Total Time: 57,979 hrs 58 min 24 sec • Installed Software Options: Auto Pecking Cycle with Load Detection, Synchronized Tapping, EIA Dynamic Compensation 2, Additional M-Code Function (2 M-Codes), G00 Slope Constant, Mazacc-3D High-Speed Software Package, Shape Compensation for Rotary Axes, Tilted Working Plane, Simultaneous 5 Axis Control • Visual Observations: Internal chamber shows normal surface wear and minor coolant staining on enclosure walls, no visible major mechanical damage

Condition: excellent (used), functionality: fully functional, MAZAK – 5-axis machining center VARIAXIS 730/5X II (dual pallet changer) Manufacturer: Machine Type: Year of manufacture: Date of commissioning: Lrodpfx Aszda Dvjbyou YAMAZAKI MAZAK Variaxis 730 with dual pallet changer 12/2007 02/12/2008 FEATURES: - Drive power 30/22 kW (30 minutes/continuous operation) - Spindle speed 35-10,000 rpm - Rapid traverse rates 42 m/min - 80 tools - SK50 !!!! - Control system: MAZATROL MATRIX - Tool length measuring device 2 ACCESSORIES: - MAYFRAN chip conveyor "CONSEP 2000", discharge on the right - High-pressure coolant for the spindle, 70 bar - CNC options package, performance signal light - Preparation for monitoring system B

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Ljdpfx Aez Rxg Hobyjru Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Technical data X-axis travel 560mm Y-axis travel 410mm Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Ledpjzq Hwnsfx Abyjru Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg

Condition: ready for operation (used), Year of construction: 2005, Offered is a vertical CNC machining center. Travels X/Y/Z: 560mm/410mm/510mm, spindle holder: SK40, spindle speed: 12000rpm, table size: 900mm x 410mm, max. table load: 500kg, tool positions: 30, max. tool weight: 8kg, max. tool length: 350mm, rapid traverse X/Y/Z: 36m/min, spindle motor: 18.5kW, operating hours: 66174h, control system: Mazatrol 640M. Equipped with 30-position tool changer, flood cooling, 1 set of manuals, 1 set of adjustment tools, adaptive feed control function, documentation available. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 2600mm/2500mm/2850mm. Inspection possible by arrangement. Lodpfx Ajy Ulmrsbyjru

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 138616, turning length: 1,000 mm, turning diameter: 580 mm, spindle speed (max.): 5,000 rpm, controller model: Mazatrol Fusion 640 MT, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Max. turning diameter: approx. 580 mm Max. machining diameter: approx. 520 mm Max. turning length: approx. 1,000 mm Main spindle speed: up to 5,000 rpm Lsdpfx Aoz Inaisbysru Milling spindle speed: up to 12,000 rpm MACHINE DETAILS CNC control: Mazatrol Fusion 640 MT EQUIPMENT Main spindle Milling spindle with B-axis Y-axis C-axis Chip conveyor Documentation, if available Coolant system Tool changer: automatic

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table load: 300 kg, overall weight: 11,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS I 500 was manufactured in 2006. It features an X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a tool magazine capacity of 60 tools and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality milling capabilities, consider the Mazak VARIAXIS I 500 vertical machining centre we have for sale. Contact us for further details. Lrjdpfx Abszpygaoyou • A: -120° / +30° • C: 360°Table • Dimensions: 500 × 400 mm • Number of tables/pallets: 2 • Spindle nose to horizontal table: 190–650 mm • Spindle nose to vertical table: 140–600 mmSpindle • Max torque: 252 NmTool magazine / ATC • Automatic tool changer: YesControl and software functions • Automatic pecking cycle with load detection • Synchronized tapping • EIA Dynamic Compensation 2 • Two additional M-code functions • G00 slope constant • High-speed function • MAZACC-3D high-speed software package • Shape compensation for rotary axes Additional equipment • Pallet changer (two pallets/tables) • Belt-type chip conveyor • Chip conveyor preparation with chip pan • High-pressure coolant through spindle system (stated as 15 kg)

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Lsdetuggcjpfx Abyjru Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Fusion 640M, table load: 500 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, product length (max.): 2,000 mm, number of axes: 3, This 3-axis Mazak VCN-410A was manufactured in 2003. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-410A vertical machining centre we have for sale. Contact us for further details. Ledpfx Aozxfcfobyjru • Table size: 900 x 410 mm • Tooling: • Tool changer: automatic, arm type • Max tool length: approx. 350 mm • Feeds: • Rapid traverse X/Y/Z: up to 36 m/min • Dimensions and weight: • Machine dimensions: approx. 2000 x 2600 x 2800 mm • Machine features/options: • Rigid tapping • EIA/ISO programming • Helical cutting • 3D compensation • Coolant system • Automatic lubrication Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,794 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, overall weight: 4,380 kg, controller manufacturer: MAZATROL, controller model: Matrix NEXUS, number of axes: 2, Horizontal turning machine manufactured in 2007. This Mazak QUICK TURN NEXUS 200-II features a maximum turning diameter of Ø 350 mm and a turning length of 550 mm. It is equipped with a chuck size of 200 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN NEXUS 200-II machine we have for sale. Contact us for further details. • Control: Mazatrol Matrix NEXUS • Chuck Size: 200 mm (8") • Maximum Turning Diameter: Ø 350 mm Lodpezg Dz Asfx Abyjru • Maximum Turning Length: 550 mm • Machine Weight: 4,380 kg • Tool Eye (Tool Setter): Yes • Coolant System: Currently not functional (coolant/water cannot be added) • Additional optional Accessories: Chip Conveyor, various clamping jaws included • Machine On Hours: 24,079 h • Spindle Hours: 8,794 h Technical Specification Counter Spindle Yes Driven Tools No

Condition: good (used), Year of construction: 2004, Vertical machining center, Mazak VCN-510C, manufactured in 2004. Ljdpfx Abozcu D Ujyeru

Condition: used, Year of construction: 1997, x-travel 1660 mm y-travel 510 mm z-travel 510 mm Control M+ Mazatrol Lodpfx Abjzwqcnoysru Table dimensions 2000x510 mm table load max. 1.000 kg number of spindle speeds 7.000 UpM tool taper SK 40 tool piece magazine with 48 Stück weight of the machine ca. 7.500 kg

Condition: used, Year of construction: 2004, x-travel 1300 mm y-travel 510 mm z-travel 570 mm max. workpiece weight 1200 kg spindle turning speed range 12000 U/min weight of the machine ca. 7,1 t Lodpoyyc Svofx Abyoru required space 5,00 x 3,20 x 3,00 m

Condition: used, Year of construction: 1995, turning diameter 510 mm turning length 1000 mm control MAZATROL T PLUS Lrjdpfx Ajzyvcrsbyou total power requirement 22-26 kW weight of the machine ca. 6,5 t

Condition: ready for operation (used), Year of construction: 2004, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 Ledpfjxk U R Njx Abysru x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze