Used Material Separators for sale (21,604)

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Bsdpfx Acsrt Uvzs Tell Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational

Condition: good (used), Pulsotronic magnetic separator (operating manual available) Blodjd Dpvhjpfx Ac Tjl Magnetic separator for use with, e.g., material vacuum cleaners New price: €4,850

Condition: good (used), Baader 601 Separator Вaader 601 provides soft separation of raw meat material from a waste components – bones, skin etc. A flexible squeezing belt transports the product to a perforated drum. It gently squeezes the softer particles like meat and fat through the holes, then the harder particles such as bones, sinews and cartilage stays outside of the drum. Capacity: up to 800 kg per hour The throughput can vary in dependence of the drum hole size, product and its pre-treatment, the selected pressure etc. Baader 601 is а user-friendly machine. Its cleaning is easy and quick. The machine is built in accordance to worldwide recognised sanitary standards. A pressure system ensuring gentle product processing and reduced machine wear. Machine has castors for easy handling. Manufacturer: Baader Bedpfxezgtanj Ac Tsll Model: 601 Capacity: Up to 800 kg./hour Drum: 3 mm and 5 mm Power: 400V / 50Hz / 3kW Machine dimensions (LxWxH): 950x950x1.800 mm Machine weight: 500 kg.

Condition: used, Year of construction: 1995, Beer clarification plant with a self-discharging separator. The separated spent grain is temporarily stored in a 55 hl conical stainless-steel tank. Additional title: Disc centrifuge for the preliminary clarification of beer Capacity: 20000 l/h Volume sludge tank: 5500 l Material: stainless steel Position: standing on feet Features: Separator; sludge tank; pump; flow measurement; turbidity measurement; control cabinet with touch-screen display; special tools; various pipes, pipe panel and valves Bsdpfxjzizh Sj Ac Tell

Condition: good (used), Included in the delivery: 01x Standard separation bar, used Material color: Sendzimir galvanized Total length: approx. 2,440 mm Separation bar length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Profile: 25 x 35 mm (H x W) Single-sided protective cap Weight per piece: approx. 2.19 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should transport or shipping be required, additional costs will apply. These can be queried separately with us, depending on the delivery location or scope of delivery. Bledpfx Ajyk E T Nec Tsl

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Bsdpfx Acoif Sg Se Tell Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Year of construction: 2026, condition: new, We also offer leasing and financing options. Feel free to contact us! Blsdpfx Acoqvmpfs Tsl For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.

Condition: excellent (used), Year of construction: 2017, Baader 600 Separator Вaader 600 provides soft separation of raw meat material from a waste components – bones, skin etc. A flexible squeezing belt transports the product to a perforated drum. It gently squeezes the softer particles like meat and fat through the holes, then the harder particles such as bones, sinews and cartilage stays outside of the drum. Capacity: up to 400 kg per hour The throughput can vary in dependence of the drum hole size, product and its pre-treatment, the selected pressure etc. Bledpfoxg Tdgox Ac Tjl Baader 600 is а user-friendly machine. Its cleaning is easy and quick. The machine is built in accordance to worldwide recognised sanitary standards. A pressure system ensuring gentle product processing and reduced machine wear. Machine has castors for easy handling. Brand: Baader Model: 600 Year: 2017 Capacity: Up to 400 kg./hour Drum: 3 mm Power: 400V / 50Hz / 1,5kW Machine dimensions (LxWxH): 1.000x800x1.200 mm Machine weight: 230 kg.

Condition: good (used), Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator -Ventilation grille: louvered grille, Filter for oil mist separator -Material: aluminum -Total dimensions: 440/330/H345 mm -Weight: 13.8kg Bjdpfx Acei I Hc He Tell

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1670-736, type of input current: three-phase, power: 7.5 kW (10.20 HP), rotational speed (max.): 7,570 rpm, space requirement height: 1,600 mm, space requirement length: 1,200 mm, input voltage: 380 V, space requirement width: 800 mm, input frequency: 50 Hz, Equipment: documentation/manual, For sale: GEA / Westfalia Separator SA 14-47-076 professional centrifuge, built in 1980, serial number 1670-736. This machine was used in a craft brewery for beer clarification. Specifications: 15–45 hl/h • 7,570 rpm • hermetic version • self-cleaning / automatic sludge removal • flow meter • 7.5 kW motor • 380 V / 50 Hz • 32 A connection. History: The machine was completely overhauled in April 2014. It was acquired in 2018 from another brewery. Maintenance work was documented by GEA / Westfalia Separator Belgium in 2021 and 2023, including the replacement of seals, sleeves, oils, greases and other maintenance consumables. Condition: Complete machine, photographed in its current installation. On-site inspection is possible by appointment. Documentation and GEA invoices are available for serious buyers. Bedpfx Acsztma Us Tsll Asking price: €19,500 (excluding VAT). Transport, disassembly and loading to be agreed upon with the buyer.

Year of construction: 2021, condition: like new (used), We are offering a Senro optical sorter, manufactured in 2021, for sale. The machine has been used for a limited number of hours. It consists of an infeed conveyor, which transports the product to the sorting machine. The sorting machine is equipped with an air bar containing nozzles that use air pressure to propel the product to be sorted across the bar. The hopper can be equipped with either NIR detection or visual detection. Cameras are still installed. Price negotiable; indicative price €50,000. If you have any questions or would like more information, please feel free to send us a message or call us. Bjdpfx Acszw I Hde Toll

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. Bedpfx Acswwt Tle Tsll 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Condition: used, functionality: fully functional, Year of construction: 2000, color: red, Material / tool or workshop container with 3 aluminum roller shutters on each side, and a tailgate at the rear. Various drawers, pull-out tables, and ramps. In good, well-maintained condition. Bljdpfx Acozv Dy Do Tjl Loading possible.

Condition: repair required (used), Year of construction: 2017, Hello, Bedpfx Acezx U R Ee Tjll I have a Sennebogen 818 material handler for sale. Year: 2017 The excavator starts, drives, and the hydraulics work; the problem is that the display is not working (no engine speed control).

Year of construction: 2014, operating hours: 12,583 h, condition: used, functionality: fully functional, machine/vehicle number: VKARC1310E0000007, The Stonefex 3000 stone separator reliably and efficiently removes stones and inert objects from biomass. The input product is typically a biomass fraction, such as that obtained from a screen, for example, the woody part of green waste, an intermediate fraction after compost screening, or wood chips. Bsdpfx Aszt I Rusc Tell

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Bedpechuvrefx Ac Tjll Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: used, Used Alfa Laval model PX60VGD-140G stainless steel separator centrifuge. Bowl speed max. 6240 rpm. Equipped with 18.5 kW/50 Hz/1500 rpm motor. Some tools available. New in 2003. Blsdezvyi Ispfx Ac Tsl

Condition: good (used), Year of construction: 2005, operating hours: 3,736 h, functionality: fully functional, overall weight: 21,000 kg, For sale: Westeria wind sifter. Bljdpjzbk U Tofx Ac Tol Type: WS Raupe Operating hours: 3736 In good working condition. Year of manufacture: 2005. Fully mobile, with good tracks. Includes a generator. Ready for use. Keywords: Recycling, waste, sorting, wind sifter, sifter, screening, windshifter, windsifter, tracks, generator, power unit, tracks, mobile

Condition: used, Used GEA Westfalia CSA 160-47-076 separator centrifuge. Working speed of bowl up to 6800 rpm. Maximum temperature up to 100°C. Machine is driven by Atex rated electric motor 30 kW, 50 HZ. Also includes tools. Bodpjzvychsfx Ac Tjll

Condition: used, functionality: fully functional, machine/vehicle number: 155-10000, Year of construction: 2014, operating hours: 17,700 h, total length: 1,281 mm, total height: 1,962 mm, total width: 895 mm, type of input current: three-phase, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, STRATASYS FORTUS 450mc INDUSTRIAL 3D PRINTER Located in ALBACETE, SPAIN US-built · Documented ULTEM licences · Material included From a professional service bureau that has now closed. Tested and fully functional: powers up, initialises and reaches Idle with no faults. === VERIFIED JOB HISTORY === We hold the machine's complete job history export, which records the material used on every job. 2,807 jobs recorded between December 2015 and October 2024. 2,478 completed successfully (88.3%). ULTEM 9085 — 662 jobs, the most-used material here; last run October 2024 ASA, 5 colours — approx. 1,315 jobs Nylon 12 — 205 jobs ABS-M30 and ABS-M30i — 204 jobs Polycarbonate (PC) — 164 jobs ULTEM 1010 — 155 jobs, 27 on the CG grade ABS-ESD7 — 98 jobs ST-130 — 4 jobs A machine will not print a material without its licence activated, so the history is direct evidence of licence status. We send the full file to any buyer who asks. === MACHINE DATA === Model: Stratasys Fortus 450mc, 3D Production System P/N: 155-10000 Bsdpfx Ajy U H Hmec Tell Manufacturer: Stratasys, Eden Prairie, Minnesota, USA Build date: December 2014 Technology: FDM, dual extruder, heated build chamber Build envelope: 406 × 355 × 406 mm Supply: 120/208 V, 18.0 A, 3W+N+PE, 50/60 Hz Approvals: TÜV SÜD NRTL (US/C), CE, FCC Part 15 Tips fitted: T16 model + T16 support Accumulated hours: approx. 17,700 h Weight: 601 kg · Dimensions: 1,281 × 895 × 1,962 mm Heavy use between 2016 and 2022, light use since. === US-BUILT MACHINE — 208 V === The machine sits in Albacete, but it is not a European machine. The data plate reads Stratasys, Eden Prairie, Minnesota (photograph in this listing): it is US specification, 208 V. In Spain it has run through a step-down transformer, which is supplied with it. For a US buyer this counts twice: it plugs straight in with no electrical conversion, and US-origin goods returning to the United States can enter under HTS 9801.00.10, with no time limit on US-origin products. === MATERIAL INCLUDED — approx. €7,270 === ULTEM 9085 and ULTEM 1010 with their supports, ST-130, PC-FR flame retardant, ABS-ESD7, ABS-M30 and M30i, ASA in five colours, PC-ISO and soluble supports SR-30, SR-100 and SR-110. Itemised inventory, canister by canister with remaining volume measured, in the attached PDF. Part of the stock is Stratasys original and part is validated third-party material (iSQUARED, and Kimya PC-FR under the Stratasys Validated Materials programme). === APPLICATIONS === Aerospace, defence, automotive, medical, industrial tooling and functional prototyping. ULTEM 9085 meets FST (flame, smoke, toxicity) requirements, which suits this machine to aircraft interior parts and certifiable tooling. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: under power, by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE1-STRATASYS Full data sheet in the attached documents. Every figure comes from the machine itself and can be verified on inspection.

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Material testing machine Testing force in tension/compression: 500 N Bjdpfx Acsziixls Toll Overall height, without head crossbeam: 789 mm Overall width: 411 mm Overall depth: 622 mm Installation area: net footprint: 0.008 m² load frame base area: 0.196 m² specific floor load: based on typical installations: 0.85 kg/cm² with 50% safety margin: 1.28 kg/cm² Ceiling load: based on typical installations: 97 kN/cm² with 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with extension arm installed pointing upwards: minimum height: 235 mm maximum height: 565 mm Working space height with extension arm installed pointing downwards: minimum height: 90 mm maximum height: 420 mm Software: testXpert III Version 1.9 Weight: approx. 78 kg with accessories Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, cutting angle (max.): 30 °, machine/vehicle number: M3378, For sale: large band saw for soft materials. Bljdpjzfwfxofx Ac Tel Outreach: 1.25 m, allowing you to cut through material up to 2.5 m wide. Cutting height: approx. 90 cm. Cutting length: approx. 2.3 m. The upper part can be tilted electrically to the left and right up to 30 degrees, making this a special sawing machine. Well-maintained machine with few operating hours. Fecken Kirfel – German quality. Installation and adjustment can be arranged upon request.

Condition: good (used), Used machine, good condition. Delivery time appr. 7 weeks after ordering The basic machine starts at 135.000 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Bjdpfxefmqq Es Ac Toll Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: used, Westfalia separator, type SD 90-01-076, from a warehouse clearance sale. Blodpezxbhdefx Ac Tsl

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Blsdpfszwvtxox Ac Tel Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.