Used Manuals for sale (13,331)

Condition: used, Manual Socket Inserter Fedpfx Aouxt Aheg Dsfw

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Fedjw S Tyajpfx Ag Defw

Condition: good (used), Manual transmission, throttle grip, throttle lever, drive lever, control lever, direction lever for outboard motors, outboard motor, outboard engine, boat engine -Hand shift: Throttle grip, unfortunately without type designation -Dimensions: 650/180/190 mm -Weight: 1.4 kg Ffedpsikbq Tefx Ag Dew

Condition: good (used), Year of construction: 1965, Measuring machine, manual Erichsen cupping testing machine, cupping testing machine, sheet metal testing machine -Manufacturer: Klingenthal -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm -Accessories: see photos -Dimensions: 460/360/H335 mm Fedpfx Agow H N Dlo Djfw -Weight: 20.5 kg

Condition: good (used), Year of construction: 2008, Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar Ffedpfsipapiox Ag Dew -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg

Condition: used, Spur gear block hoist, spur gear chain hoist, manual chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Load capacity: 1000 kg -Max. Stroke: 4800 mm -Dimensions: 280/600/H190 mm Fjdpfx Ajc Rwc Dog Defw -Weight: 38 kg

Year of construction: 2020, condition: excellent (used), Faber SMESAMA Manual disk cutter 2020, Stainless, manual disk cutter is used to make disks or half wheels from cheese wheels with rind or previously scraped, max input product size 500mm diameter and 320mm height, 4 disks per min, 3Ph Ffodpfexuku Eex Ag Dew

Condition: excellent (used), Year of construction: 1997, operating hours: 13,755 h, Electric pallet truck. - The cart is in working order. - Manufacturer: JUNGHEINRICH, type: EJC 16. Fsdpfx Aeudlf Nsg Dofw - Read operating hours (h): 13751, - Serial number: 805 491 81 - Loader. - After inspection in 2023.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN571030, Year of construction: 2018, operating hours: 5,715 h, load capacity: 1,600 kg, lifting height: 6,500 mm, fuel type: diesel, mast type: triplex, fork length: 2,200 mm, Equipment: cabin, seat heater, sideshift, Jungheinrich DFG 316s Forklift Truck in excellent condition, fully functional and ready for immediate operation. Perfect for warehouses, logistics, or industrial applications that require high lifting with maximum stability. 🔹 Capacity: 1,600 kg Fodpsycp Sgefx Ag Djfw 🔹 Lift height: 6,500 mm 🔹 Lowered height: 2,750 mm 🔹 Mast: Triplex 🔹 Drive: Diesel 🔹 Year: 2018 🔹 Weight: 3,185 kg Key features: ✔️ Integrated sideshift ✔️ Fully enclosed cab with doors ✔️ Heating ✔️ Work lights ✔️ 3 hydraulic functions ✔️ Long forks (2,200 mm) Machine ready for demanding operations and handling long or bulky loads. ✔️ Financing available ✔️ Nationwide delivery across Spain ✔️ Video demonstration upon request 📞 Contact us for more information or a no-obligation quote. At HP Elevación, we specialize in the sale, leasing, rental, and maintenance of forklifts, forklift trucks, electric and manual pallet trucks, stackers, and aerial work platforms. We offer a large stock of new and used equipment from leading brands in the sector: Linde, Toyota, Jungheinrich, Cesab, Still, Manitou, Mitsubishi, Nissan, BT, Komatsu, Yale, and more.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: CE432306, Year of construction: 2023, load capacity: 1,600 kg, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, Used electric forklift, CESAB B316, in excellent condition. Lifting height: 5000 mm Mast: TRIPLE Fedpfxjycxi Is Ag Djfw Drive: ELECTRIC NEW BATTERY Year of manufacture: 2023 ✔️ Inspected opportunity ✔️ Financing available ✔️ Delivery throughout Spain 📞 Request a quote or a working video with no obligation. At HP Elevación, we specialize in the sale, rental, leasing, and maintenance of forklifts, pallet trucks (electric and manual), stackers, and lifting platforms. We offer a wide stock of new and used equipment from the main brands in the sector: Linde, Toyota, Jungheinrich, Cesab, Still, Manitou, Mitsubishi, Nissan, BT, Komatsu, Yale and many more.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,393 h, load capacity: 1,250 kg, lifting height: 3,000 mm, fuel type: electric, battery capacity: 875 Ah, battery voltage: 24 V, battery weight: 600 kg, We are offering this used Jungheinrich EFG113 low-lift pallet truck, year of manufacture 2017. Ffodoyma N Djpfx Ag Dow Type: 24V 7 PzS 875 Serial number: C81053070 Rated voltage: 24 V Number of cells: 12 Manufacturer number: 28625590 Production week/year: 39/2017 Delivery number: 21866 Capacity C5: 875 Ah Battery weight: 600 kg Acid volume: 80 l If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1963, stroke = 250 mm Fjdpfxoydlxfj Ag Dsfw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 794 h, load capacity: 1,500 kg, lifting height: 150 mm, fuel type: electric, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,500 kg Lifting height: 150 mm Overall height: 1,300 mm MACHINE DETAILS Drive type: Electric Battery: 48 V 20 Ah Operating hours: 794 h EQUIPMENT Former Linde full-service unit All dimensions are approximate values. No liability for typographical or measurement errors. Ffsdjyk Ddtepfx Ag Dow COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior registration Monday to Friday 7:00–16:30. Excessively high mast can be dismantled for transport upon request. If the collection is not made within the deadline, a storage fee of €20 per machine per day will be charged (payment must be made before collection).

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: CT1133L69110, Year of construction: 2022, operating hours: 640 h, load capacity: 1,500 kg, lifting height: 150 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,500 kg Ffjdpfx Agjyk Dbfj Djw Year of manufacture: 2022 Operating hours: 640 h Lift height: 150 mm Overall height: 1,300 mm Mast type: none Free lift: 0 mm MACHINE DETAILS Drive type: electric Design: low lift pallet truck Battery: 48 V 20 Ah EQUIPMENT Former Linde full-service unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,392 h, load capacity: 1,400 kg, lifting height: 2,344 mm, fuel type: electric, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lift height: 2,344 mm Overall height: 1,740 mm MACHINE DETAILS Mast type: Standard Drive type: Electric Battery: 03/2019, 24V 3PzS 375Ah Battery output: 24.8 V Operating hours: 2,392 h EQUIPMENT Former Linde full-service device Next service due: 02/2027 or in 1,000 operating hours All dimensions are rounded. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with a large forklift at your own risk. Collection ONLY with email payment confirmation! Fsdeyk A S Ajpfx Ag Djfw Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. A mast that is too high can be dismantled for transport upon request. If not collected within the agreed time, a storage fee of €20 per machine per day will be charged (payment must be settled before collection).

Condition: repair required (used), functionality: not functional, machine/vehicle number: CT1133G00926, Year of construction: 2016, load capacity: 1,500 kg, lifting height: 150 mm, fuel type: electric, No reserve price – guaranteed sale to the highest bidder! The pallet truck does not start, possibly due to a flat battery. TECHNICAL DETAILS Load capacity: 1,500 kg Lift height: 150 mm Overall height: 1,300 mm MACHINE DETAILS Drive type: Electric Battery: 24 V EQUIPMENT Former Linde full-service unit All measurements are approximate. No liability is accepted for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site at your own risk. Collection ONLY with email confirmation of payment! Fedpfjyk Atysx Ag Dofw Collection WITHOUT appointment Monday to Friday 7:00-16:30. A mast that is too high for transport can be dismantled upon request. If collection is not made by the deadline, a storage fee of €20 per machine per day will be charged (payment must be made before collection).

Condition: repair required (used), functionality: not functional, machine/vehicle number: CT1133V01410, Year of construction: 2019, load capacity: 1,500 kg, lifting height: 150 mm, fuel type: electric, No reserve price – guaranteed sale to the highest bidder! Fodpoyk Amaefx Ag Dsfw The pallet truck does not start; the battery may be discharged. TECHNICAL DETAILS Load capacity: 1,500 kg Lift height: 150 mm Overall height: 1,300 mm MACHINE DETAILS Drive type: Electric Battery: 24 V Unladen weight: 148 kg EQUIPMENT Former Linde full-service machine All dimensions are approximate. We do not accept liability for typographical or measurement errors. PICK-UP TERMS Side loading up to 5 t possible with large forklift on site at your own risk. Collection ONLY with an email payment confirmation! Pickup WITHOUT prior registration Monday to Friday 7:00–16:30. A mast that is too high can be removed for transport upon request. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged (payment must be made before pickup).

Condition: used, Year of construction: 2016, load capacity: 2,000 kg, battery model: 2 PzB 130, battery capacity: 130 Ah, battery voltage: 24 V, overall weight: 140 kg, We are offering this used Jungheinrich 24V 2 PzB 130 low-lift pallet truck, year of manufacture 2016. Fedpfjynv Ewox Ag Djfw Type: 24V 2 PzB 130 Production week/year: 40/2016 Supplier number: 21866 Capacity C5: 130 Ah Weight ±5%: 140 kg Number of cells: 12 pcs Part no.: 28632120 Serial no.: C81007625 If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, total width: 350 mm, total length: 1,500 mm, total height: 530 mm, bending angle (max.): 135 °, Manual Sheet Metal Bending Machine The bending machine allows the production of complex profiles and bends. Thanks to the segmental design, it is possible to perform advanced sheet metal forming operations. Our model features an improved construction – thanks to the simple and quick removal of segments, it is possible to bend channels, boxes and similar shapes. The segments on the upper beam are mounted with Allen screws. Tilting by means of a handle Upper clamping beam with a 45° apex angle Easy positioning of the upper clamping beam; removable segments for box bending The machine is equipped with a deflection compensation adjustment system (when bending thicker sheets it eliminates the so-called “banana effect”) Technical Specifications Working length: 1220 mm Maximum sheet thickness: 1.5 mm Maximum opening height: 30 mm Bending angle: 0–135° Dimensions (L × W × H): 1500 × 350 × 530 mm Weight: 165 kg Segments: 5 × 50 mm / 6 × 76 mm / 5 × 102 mm SEGMENT SHEET METAL BENDING MACHINE 1220 × 1.5 MTP 165 KG Delivery Terms The machine is brand new 12-month warranty Ffjdpfjytfabsx Ag Dew Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Specification: Manufacturer: Poland Year of manufacture: 2008 – 2012 Working length: 3100 mm Bending thickness: 1.0 mm Fodeymm D Iepfx Ag Dsfw If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, TBS - Manual plate shears Manual plate shears Suitable for cutting mild steel, aluminium, copper, zinc, plastics Fedpfx Agjcnxc Rj Dofw High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support surface with scale and adjustable back gauge 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Article no. 3746020 Technical data working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Dimension in mm 2450 x 1100 x 1050 mm

Condition: new, Year of construction: 2026, HSBM 2020-20 SB - Manual swing bending machine HSBM SB - Manual swing bending machine in heavy design with segmented upper tools simple operation segmented upper tools swivel bending function with secure clamping of the workpiece by pretensioning of the upper beam heavy, compact welded construction for easy bending with exact adjustment of the bending angle by means of stop with scale particularly low-maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note on technical data: max. sheet thickness: performance data related to material with tensile strength 400N/mm²; bending capacity VA: factor 0,75; bending capacity Alu: factor 1,2; for bending VA hardened upper tools are required Model HSBM 2020-20 SB Article-No. 3772920 Technical data working width max. 2.020 mm bending capacity max. steel 400 N/qmm 2 mm Bending capacity max. steel 400 N/qmm without cheek widening Bending capacity max. steel 400 N/qmm w. cheek widening Bending capacity max. stainless steel 1,5 mm Bending capacity max. aluminium 2,4 mm Bending angle max. 135 Segment division Clearance between upper and lower cheek max. 120 mm length 2500 mm width 710 mm height 1500 mm Weight 1.020 kg Location: Ex works - free on truck - Fodpfx Ajcnxc Njg Dsfw

Condition: excellent (used), mileage: 876,343 km, power: 599 kW (814.41 HP), first registration: 10/1999, fuel type: diesel, number of seats: 31, gearing type: mechanical, axle configuration: 4x2, emission class: euro2, suspension: steel-air, tire size: 215/75 R17.5, total length: 8,100 mm, total width: 2,300 mm, total height: 2,850 mm, Year of construction: 1999, Equipment: ABS, air conditioning, = Additional options and accessories = - Radio/CD player = Notes = TRANSPORT TO ANTWERP 590 EURO = Additional information = Number of doors: 3 Transmission: 6-speed, manual Tyre size: 215/75 R17.5 Front axle: Steered; Suspension: Leaf spring Fedpfowdnc Isx Ag Dsfw Rear axle: Twin tyres; Suspension: Air suspension Unladen weight: 5,100 kg Technical condition: very good Optical condition: very good Reference number: 7

Condition: used, machine/vehicle number: 26369, Year of construction: 2022, operating hours: 1,745 h, load capacity: 1,600 kg, lifting height: 210 mm, fuel type: electric, construction height: 1,290 mm, Device details: Year of manufacture: 2022 Load capacity: 1,600 kg Lift height: 210 mm Indicated operating hours: 1,745 h Mast type: None Mast height: 900 mm Ffodpfx Aeychg Aeg Dsw Length/Width/Height: 1,500 / 720 / 1,290 mm Operating weight: 421 kg Battery from: 2022 Additional equipment information: ---- Operating hours are generally read-off hours. We are happy to offer you suitable transport options. A further 250 – 300 forklifts, attachments, and sweepers available immediately. Rental options are, of course, also available! We are happy to purchase your used equipment. Do you have questions? You can reach us during our business hours from 7:30 AM to 4:00 PM. We look forward to hearing from you! We speak English. Interim sale and errors in this offer are expressly reserved. For trade sales, the device is sold in its current condition, not refurbished. All information provided without guarantee; errors and changes reserved.

Condition: used, machine/vehicle number: 26367, Year of construction: 2021, operating hours: 1,029 h, load capacity: 1,600 kg, lifting height: 210 mm, fuel type: electric, construction height: 1,300 mm, Device Details: Year of manufacture: 2021 Load capacity: 1600 kg Lift height: 210 mm Recorded operating hours: 1029 h Mast type: None Mast height: 900 mm Length/Width/Height: 1300 / 720 / 1300 mm Operating weight: 405 kg Battery year: 2021 Further device information: ---- Operating hours are generally displayed hours. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers available immediately for you. Of course, also available for rental! We are happy to buy your OLD equipment. Do you have questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! Ffedpfsychgpox Ag Dow We speak English. Interim sale and errors for this offer are expressly reserved. In trading business, the device is sold in AS-IS condition, not refurbished. All information is provided without guarantee, subject to errors and changes.