Used Deckel Maho Dmu 70 Evolution for sale (327)

Condition: excellent (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller model: CNC Heidenheim ITNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 18,000 h, number of slots in tool magazine: 94, Equipment: chip conveyor, documentation/manual, Technical specifications Travel ranges: X = 750 mm, Y = 600 mm, Z = 520 mm Speed range: 20–18,000 rpm Bodpo Ahxzqefx Afmslp Tool interface: HSK 63 Tool magazine with 92 tool positions Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar 3D probe Band filter General overhaul in 2021 The following work was carried out during the general overhaul: Replacement of hydraulic lines Replacement of linear guides and ball screws of the X, Y, and Z axes, including associated bearings and timing belts Replacement of scrapers and bellows Work carried out most recently in 2026 Repair of the Z-axis servo motor Replacement of the hydraulic unit for lubrication Replacement of the AC servo controller of the X-axis

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper HSK-A63 table surface area 700 x 500 mm Swivel range B-Axis 0 - 180 ° Swivel range C-Axis 0,001 ° max. table load 350 kg center hole 30 H6 mm T-slots 7x 14H7 x 63 mm table turning speeds 21,5 rpm number of toolpositions 32 pos. max. tool length 315 mm max. tool diameter 105 mm max. tool-dia with free toolbox 130 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 50 / 50 / 50 m/min feed speeds 20.000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN total power requirement 50 kVA Blodpfxjuntmdj Afmjp weight of the machine ca. 8,5 t dimensions of the machine ca. 6,5 x 3,5 x 3,5 m 5 Axis-CNC-Machining Center DECKEL MAHO - DMU 70 eVolution - 5 Axis - NC-Swivel-Rotary-Table - Operating-Hours: Power-On: ca. 62.500h / Spindle: ca. 15.100h

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: TNC430, overall weight: 6,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 32, Rapid traverse rate X/Y/Z: 50 m/min Bodpj Agm Tbefx Afmelp Tool holder: SK 40 Table: max. load approx. 200 kg Coolant system Chip conveyor Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport and proper installation – all from a single source. Billing based on individual terms and conditions and duration. Contact us for your personal offer.

Condition: ready for operation (used), Year of construction: 2003, A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible. Bljdpfx Aozrn Iqefmep

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. Bljdpfowxd Agox Afmjp The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2001, Manufacturer: DECKEL MAHO (DMG) Model: DMU 70 VL Year of Manufacture: 2001 Control Unit: HEIDENHAIN TNC 430 Machine Type: 5-Axis Universal Machining Center Working Range / Travels: X-axis: 710 mm Y-axis: 520 mm Z-axis: 520 mm B-axis (Swivel range): -10° / +95° (NC-controlled) C-axis (Rotary table): 360° (NC-controlled) Work Table: Table Type: NC Swivel-Rotary Table Clamping Surface: Ø 700 x 500 mm Max. Table Load: 350 kg Bledpfoyh Nm Sox Afmep Milling Spindle: Max. Spindle Speed: 12,000 RPM (Motor Spindle) Drive Power (40% / 100% ED): 15 kW / 10 kW Tool Taper: SK 40 (DIN 69871) Tool Changer: Magazine Positions: 30 slots Max. Tool Diameter: 80 mm / 160 mm (with empty adjacent pockets) Max. Tool Length: 315 mm Max. Tool Weight: 6 kg Feed Rates & Motion: Rapid Traverse (X/Y/Z): 30 m/min Max. Feed Rate: 20,000 mm/min Weight & Footprint: Machine Weight: approx. 5,500 kg Total Power Requirement: 40 kVA Space Requirements: approx. 4.0 m x 3.0 m x 2.8 m Equipment & Features: High-End Control: Heidenhain TNC 430 5-Axis Capability: Full NC swivel/rotary integration.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Blodpfx Afju Hf Rysmop Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Blodpjymcvmsfx Afmsp Technical Specification Taper Size HSK 63

Condition: repair required (used), Year of construction: 1996, functionality: limited functionality, machine/vehicle number: 500 050, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 82 Nm, controller manufacturer: Grundig / Heidenhain, controller model: MillPlus, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 50 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total length: 2,200 mm, total width: 1,800 mm, table width: 500 mm, table height: 800 mm, table length: 700 mm, table load: 200 kg, rotary table diameter: 500 mm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, Deckel Maho DMU 50 T – CNC universal milling machine (year of manufacture 1996) For sale is a CNC universal milling machine, Deckel Maho DMU 50 T, equipped with the proven MillPlus control system. This machine is ideally suited for toolmaking, the production of single parts and small series, as well as for training workshops. Key features: Control system: MillPlus (Deckel Maho) Travel distances: X = 500 mm / Y = 400 mm / Z = 400 mm Table: Swiveling round table for flexible 5-axis machining Equipment: Full enclosure with sliding doors and ergonomic control panel Bljdoz D Ab Tspfx Afmsp The machine has a fault in the X-axis. When moving, it triggers the emergency stop. Since the machine has not been used since 2018, repairing it is not worthwhile for us. Sales and transport conditions (Incoterms): Sales condition: EXW (Ex Works / Ex Location) Dismantling & Loading: The dismantling, removal from the building, loading, and transport must be fully organized and carried out by the buyer (at their own cost and risk). Dismantling can also be carried out for a fee. Various accessories included. The machine can be inspected on site by appointment.

Condition: excellent (used), Year of construction: 2001, I have a Deckel Maho DMU 60T machining center for sale. Control system: Heidenhain 430 Technical condition of the machine: Very good Year of manufacture: 2001 Country of origin: Germany Machine parameters: X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Swiveling head Maximum spindle speed: 12,000 rpm Tool magazine: 24 tools (2 x 12 tools) Heidenhain linear scales on all axes Chip conveyor Central lubrication Bsdpfx Afo Ahdrvsmslp Hydraulic tool clamping Spindle taper: SK40 Complete programming manual Mechanical and electrical documentation Loading is included in the price Stal-Com has been involved in the sale, service, and training for CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers in Poland but also by customers throughout Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from our company, we provide training for the staff and can also set up production at the customer's facility. We cooperate with many companies on a long-term basis, supplying them with additional machine tools.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Bsdezu Ixnopfx Afmelp Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: repair required (used), Year of construction: 1999, functionality: not functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 310, table width: 500 mm, table length: 700 mm, table load: 200 kg, rotational speed (max.): 5,000 rpm, overall weight: 3,000 kg, spindle speed (max.): 5,000 rpm, spindle nose: SK40, input voltage: 400 V, DECKEL MAHO DMU 50 M CNC | Heidenhain TNC 310 | Year 1999 | Damaged For sale: Deckel Maho DMU 50 M CNC machining center from 1999, equipped with Heidenhain TNC 310 control. The machine is sold as damaged – it displays error 120202 during startup, therefore it is offered as a unit for repair or for parts. The error indicates a lack of connection to the PLC controller. Technical data * Manufacturer: Deckel Maho * Model: DMU 50 M * Year of manufacture: 1999 * Control: Heidenhain TNC 310 * Machine type: Universal CNC milling center (3+2 axes) Working parameters * X-axis travel: 500 mm * Y-axis travel: 400 mm * Z-axis travel: 400 mm * Table surface: 700 × 500 mm * Maximum table load: approx. 200 kg * Spindle speed range: 0-5000 rpm * Spindle taper: SK40 * Maximum working feed rate: 5000 mm/min * Rapid traverse: 5 m/min ## Equipment * Heidenhain TNC 310 control * Manual tilting/rotary table: * B-axis: from -10° to +95° * C-axis: 360° * Cooling system * Safety guards Bodpfe Adzt Isx Afmolp ## Technical condition The machine is sold as non-functional. Error message 120202 appears during startup. The error has been discussed with a service technician, who indicates damage to the middle LT module - the module itself reports error 1. Repairing the module, depending on the extent of the damage, costs between 5,000 and 8,000 PLN. The machine is sold in the condition shown in the photos. Ideal for a service company, someone involved in CNC machine repair, or as a source of spare parts. It was in continuous use until October 2024. ## Additional information * Year of manufacture: 1999 * Weight: approximately 3000 kg * Power supply: 400 V * Loading possible. * Viewing by prior arrangement. Price: negotiable I will issue a VAT invoice. The stated price is the net price. Please contact me by phone and arrange to view the machine. Machine loading is not possible - sold without loading. We do not have a forklift with the appropriate lifting capacity.

Condition: good (used), Year of construction: 2013, operating hours: 21,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens, controller model: Sinumerik, table load: 200 kg, rotational speed (max.): 12,000 rpm, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Universal machining center DECKEL MAHO DMU 50 Ecoline Year of manufacture: 2013 Control system: Sinumerik 840D Operating hours: 21,000 hours Technical data: Bljdpsz Td Arofx Afmjp Spindle speed: 10 - 12,000 rpm Drive power: Internal cooling system pressure: 12 bar Tool holder: SK 40 Number of magazine positions: 30 Travel distances: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: +5/-110° C-axis: 0.001° Accessories: - Chip conveyor - Coolant system, 12 bar Further data and images will follow. All technical specifications are without guarantee.

Condition: excellent (used), Year of construction: 2006, operating hours: 4,895 h, functionality: fully functional, machine/vehicle number: 11415553974, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total length: 3,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, DECKEL MAHO DMU 50 – 5-axis CNC machining center Technical data: Manufacturer: DECKEL MAHO / DMG Model: DMU 50 Year of manufacture: 2006 Serial number: 11415553974 Control system: HEIDENHAIN iTNC 530 Axes: 5 (X, Y, Z, B, C) Bljdpfxs Afwhqo Afmep Travel range X: 500 mm Travel range Y: 450 mm Travel range Z: 400 mm Spindle speed: up to 8,000 rpm (manufacturer's standard, to be confirmed) Tool holder: HSK 63 NC rotary table: B and C axes Table size: 630 × 500 mm (manufacturer's specification) Maximum table load: 200 kg (manufacturer's specification) Operating hours: approx. 25,632 h Second hour counter: approx. 4,895 h Connected power: 17 kVA Operating voltage: 400 V / 50 Hz Condition: Used, well-maintained appearance. Important: The machine is sold exclusively without any accessories. No tools, tool holders, or machine vises are included. Inspection possible by appointment.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC 530 Bodpfj Ahn Hyox Afmolp tool taper HSK 63 total power requirement 34 kVA weight of the machine ca. 4810 kg Accessories oil-mist-extractor Additional information Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Net price: €14,200.00 Gross price: €16,898.00 You will receive a proper invoice with VAT shown. Internal article number: 26100 Deckel Maho DMU 50 T Blodpfxo Ahhgge Afmjp 5-axis (3+2) CNC machining center Year of manufacture: 2001 Operating hours: approx. 31,000 hours Program run time: approx. 8,500 hours + Documentation (operating manual, electrical wiring diagram, floppy disks) + Electronic handwheel Technical data Control: Heidenhain TNC426 Tool holder: SK 40 Tool places: 16 Travel distances X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm Table size: 700 mm x 500 mm rotary table Motor power: 9 kW at 100% duty cycle / 13 kW at 40% duty cycle Connection: 17 kVA Weight: approx. 3000 kg Dimensions L x W x H: approx. 200 x 160 x 220 cm The machine is fully functional, in good condition and can be inspected and demonstrated in our heated warehouse with over 500 m² of space, while powered on. If you have any further questions, please do not hesitate to contact me by telephone at any time.

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, DMU 50 Evolution 32 tools Tool breakage monitoring Bode Abbl Espfx Afmolp Millplus Indunorm Ultralight automation system with 24 vises (year of manufacture 2010)

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 18378, operating hours of spindle: 30,620 h, For sale is a highly precise and dynamic 5-axis CNC universal machining center from the reputable manufacturer DECKEL MAHO, model DMU 80 P hi-dyn, manufactured in the year 2000. This machine comes from the proven "hi-dyn" series (High Dynamics), which is characterized by extremely fast rapid traverse speeds, high acceleration values, and a robust portal design. It is ideally suited for highly precise 5-sided and 5-axis simultaneous machining in demanding tool, mold, and prototype construction. The machine is in operational condition and impresses with the combination of large travel ranges, an NC swivel rotary table, and stable machine kinematics. Equipment: - Rotary table - mounted special clamping device - 2 precision vises - viewing window - Heidenhain TNC426 control unit - 60-position tool changer SK40 - chip conveyor - separate coolant system with band filter Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors! Blodpfx As Afphijfmep

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, CNC Universal – Machining Center DECKEL MAHO DMU 95 monoBlock NEW DMG Design With Heidenhain TNC 640 path control Year of manufacture: 2024 Travel ranges: X 950 Y 850 Z 650 Spindle speed range: 0 – 20000 rpm, stepless (HSK 63) With the following accessories: NC rotary table, 1000 mm x 750 mm clamping surface 3D measuring probe, Heidenhain TS 460 Vertical tool changer with 120 magazine slots (HSK 63) Tool breakage monitoring Chip flushing in the work area door Chip flushing gun with pump, 1 bar/40 l min Blow-off air at the spindle center Accuracy package Application Tuning Cycle MPC Machine Protection Control Net Service App, Service Agent Operating mode 3 + 4 Electronic handwheel IKZ 40 bar with paper band filter Chip conveyor Rotoclear Coolant system Spindle oil cooler Oil mist extraction 3-piece height-adjustable machine feet Control cabinet cooler (Rittal) Operating manuals THE MACHINE IS IN EXCELLENT CONDITION. Bljdps Agvvyjfx Afmsp

Condition: good (used), Year of construction: 1998, CNC milling machine Deckel Maho DMU 80 T Control system: Heidenhain TNC426 Spindle speed: 20-6300 rpm Feed rate x, y, z: 20-10000 mm/min Rapid traverse rate x, y, z: 15000 mm/min Work area: x 800 mm, y 650 mm, z 550 mm Tool holder: SK40 DIN 2079 Clamping bolt DIN 69 872 Tool changer: 25 positions Max. tool diameter 160 mm Max. overhang length from the spindle nose 315 mm Work table: Dimensions 1100 x 600 mm T-slots 9 x M14 Permissible weight 500 kg Transport data: Weight 5800 kg Bljdpfoz Suqqox Afmep Dimensions (length x width x height) 3.05 x 2.40 x 2.45 m

Condition: used, operating hours: 32,000 h, total height: 2,700 mm, total length: 5,500 mm, total width: 2,500 mm, Year of manufacture: 1997 Colour: White Empty weight: 13.000 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes Bledpfxoy Uv U Hj Afmjp - CE certificate present: No - Serial number: 120245 - Operating hours: 32000 - Drive system: CNC - Horizontal/vertical: Horizontal and vertical - Control system brand: Heidenhain - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - C-axis rotation [°]: 360 - Table length [mm]: 1250 - Table width [mm]: 1000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 - Options: Tool magazine, Digital readout - └ Type of digital readout: Heidenhain - └ Tool magazine [pcs.]: 30 - Transport dimensions: 5500mm x 2500mm x 2700mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2006, operating hours: 14,500 h, functionality: fully functional, FOR SALE MACHINING CENTER DMG DECKEL MAHO DMU 50 (5-Axis) Key feature: Only 14,690 actual spindle hours (PGM operation) for a 2006 machine. Mechanics are in very good condition. Bsdpfj Af Ap Hjx Afmolp Main specifications: • Control: HEIDENHAIN iTNC 530 (with separate 3D screen) • Machining travels: X = 500 mm | Y = 450 mm | Z = 400 mm • Tilting rotary table: Ø 630 x 500 mm (B-axis: -5°/+110° | C-axis: 360°) • Max. table load: 200 kg • Tool magazine: 16 positions • Power supply: 400 V / Three-phase (Low consumption: 17 kVA) Included equipment: • Industrial precision vise (already installed and adjusted) • Separate electronic handwheel • Coolant system with adjustable nozzles Conditions: • Used machine, available for inspection in working order. • Removal and transport are the responsibility of the buyer. • Professional sale with invoice (VAT recoverable).

Condition: used, Year of construction: 2000, operating hours: 3,273 h, machine/vehicle number: 15015702974, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, torque: 130 Nm, controller manufacturer: Heidenhain 426/430, workpiece weight (max.): 350 kg, total height: 2,724 mm, total length: 2,756 mm, total width: 2,020 mm, table width: 500 mm, table length: 700 mm, rotary table diameter: 700 mm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, 5-Axis Machining Center DECKEL MAHO DMU 70V We offer for sale an advanced, universal vertical machining center, the Deckel Maho DMU 70V (part of the renowned DMG MORI group), equipped with a numerically controlled (NC) rotary/tilting table. The machine features a compact and robust design, minimizing its footprint in the production hall while offering full capabilities for advanced 5-axis machining. AXIS SPECIFICATIONS AND WORKING AREA • Axis travel (XYZ): X = 710 mm | Y = 520 mm | Z = 520 mm • Working travel: 710 mm (X) / 520 mm (Y) / 520 mm (Z) INNOVATIVE NC ROTARY/TILTING TABLE (4th and 5th AXIS) • Mounting surface dimensions: ∅ 700 mm x 500 mm (practical design with factory-cut sides, facilitating optimal mounting of vises and fixtures) • Maximum table load: 350 kg (full mechanical safety of the gearbox, bearings, and measuring system) • Axis rotation range: • C-axis (rotation): continuous / multi-rotation operation (advanced trochoidal milling strategies) • B-axis (tilting): wide working range of over 180°, providing excellent access to the workpiece and freedom for angled undercutting Bodpozumh Iofx Afmjlp MAIN DRIVE AND SPINDLE • Spindle speed: continuously (steplessly) adjustable in the range of 20 – 12,000 rpm • Spindle power: 15 kW • Maximum torque: up to 130 Nm (powerful cutting force guaranteeing excellent stiffness and stability during heavy rough machining of hard materials) CONTROL SYSTEM AND TOOL MAGAZINE • Control system: Reliable and widely appreciated by operators, the Heidenhain 426/430 (simple dialog programming, intuitive menu) • Tool magazine: Automatic, compact chain-type magazine with a capacity of 32 positions (fast tool change in automatic cycles) LOGISTICAL AND CONNECTION PARAMETERS • Overall dimensions of the machine ready for operation (with chip conveyor): • Length: 2756 mm • Width: 2020 mm • Transport height: 2724 mm (the machine fits easily on standard trailers and passes through conventional hall doors) • Total machine weight: approx. 5,500 kg • Maximum power consumption (connection): up to 42 kVA • Input voltage: 400 V (AC - three-phase current) • Current protection (fuse): 63 A • Power supply frequency: 50/60 Hz MACHINE CONDITION AND ADDITIONAL INFORMATION The machine is in good technical condition, regularly serviced and maintained. It is ideally suited for both serial production and tool shops producing complex molds, dies, and precise 5-axis parts. The machine comes complete with a chip conveyor.

Condition: ready for operation (used), Make: DECKEL MAHO Type of machine: DMU 35 M Control system: SIEMENS Sinumerik 840D Bljdjzru Nhepfx Afmsp Machine's weight: 1,8 t Tool holder: SK 40 x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm Speed range: 20 – 6 300 min?¹ max. Table load: 100 kg Overall dimensions: 2,0 × 1,6 × 2,1 m Table dimensions: 400 x 280 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, DECKEL MAHO DMU 60 T – CNC Universal Machining Center – 2001 Manufacturer: DECKEL MAHO Model: DMU 60 T Year of manufacture: 2001 Condition: Used CNC control: HEIDENHAIN Machine type: CNC Universal Machining Center Technical specifications Machine dimensions (L × W × H): 2,900 × 2,200 × 2,900 mm Machine weight: approx. 6,500 kg CNC control: HEIDENHAIN Rotary table Automatic tool changer Enclosed machining area Accessories Tool holders and cutting tools shown in the photographs (inclusion in delivery to be confirmed) Rotary table Bjdo Acpagjpfx Afmslp Automatic tool magazine Description Used DECKEL MAHO DMU 60 T CNC universal machining center, manufactured in 2001, equipped with HEIDENHAIN CNC control and a rotary table. The machine is suitable for universal milling, toolmaking, and precision machining applications. The machine is offered with photographic documentation. Further technical details, availability, and scope of delivery can be provided upon request.