Used Manuals for sale (12,786)

Condition: used, functionality: fully functional, machine/vehicle number: 2488108, Year of construction: 2019, load capacity: 1,600 kg, lifting height: 4,150 mm, free lift: 1,666 mm, load center: 600 mm, fuel type: electric, power: 1.8 kW (2.45 HP), battery capacity: 300 Ah, battery voltage: 24 V, battery weight: 270 kg, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 70 mm, ground clearance: 19 mm, turning radius (outer): 1,493 mm, front tire size: 230, rear tire size: 85, overall weight: 1,439 kg, total height: 1,946 mm, total length: 2,045 mm, total width: 790 mm, color: red, Equipment: pallet forks, Technical specifications - Year of manufacture: 2019 - Drive: Battery - Operation: Walk-behind - Load capacity: 1,600 kg - Support arm lift: 2,000 kg - Lift height: 4.15 m - Height with mast extended: 5.06 m - Load centre: 600 mm - Weight: 1,439 kg - Fork dimensions (L x W x T): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 2.05 m x 0.79 m x 1.95 m Cgodpfxeyqzk De Agfeu - Max. travel speed: 0.6 – 6.0 km/h - Max. lifting speed with/without load: 0.17 m/s / 0.33 m/s - Max. gradeability with/without load: 7% / 12% Fully functional, typical signs of use.

Condition: used, functionality: fully functional, machine/vehicle number: 2488118, Year of construction: 2019, load capacity: 1,600 kg, lifting height: 4,150 mm, free lift: 1,666 mm, load center: 600 mm, fuel type: electric, construction height: 5,056 mm, power: 1.8 kW (2.45 HP), battery capacity: 300 Ah, battery voltage: 24 V, battery weight: 270 kg, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 70 mm, ground clearance: 19 mm, turning radius (outer): 1,493 mm, front tire size: 230, rear tire size: 85, overall weight: 1,439 kg, total height: 1,946 mm, total length: 2,045 mm, total width: 790 mm, color: red, Equipment: pallet forks, Technical specifications - Year of manufacture: 2019 - Drive: Battery - Operation: Walk-behind - Load capacity: 1,600 kg - Support arm lift: 2,000 kg - Lift height: 4.15 m - Height with mast extended: 5.06 m Codpfoyqzkwjx Agfsgu - Load centre: 600 mm - Weight: 1,439 kg - Fork dimensions (L x W x T): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 2.05 m x 0.79 m x 1.95 m - Max. travel speed: 0.6 – 6.0 km/h - Max. lifting speed with/without load: 0.17 m/s / 0.33 m/s - Max. gradeability with/without load: 7% / 12% Fully functional, typical signs of use.

Condition: used, functionality: fully functional, machine/vehicle number: 2488028, Year of construction: 2019, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 166 mm, load center: 600 mm, fuel type: electric, power: 1.5 kW (2.04 HP), battery capacity: 225 Ah, battery voltage: 24 V, battery weight: 219 kg, fork carriage width: 674 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 60 mm, ground clearance: 22 mm, turning radius (outer): 1,393 mm, front tire size: 230 x 70, rear tire size: 85 x 74, overall weight: 929 kg, total height: 3,720 mm, total length: 1,910 mm, total width: 770 mm, color: red, Equipment: pallet forks, Technical data - Year of manufacture: 2019 - Drive: Battery - Operation: Pedestrian - Load capacity: 1200 kg - Support arm lift capacity: 1600 kg - Lift height: 4.15 m - Height of mast extended: 4.60 m - Ground clearance: 150 mm - Load centre: 600 mm Cgedjyqzkqjpfx Agfou - Weight: 929 kg - Fork dimensions (L x W x D): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 1.91 m x 0.77 m x 2.14 m - Travel speed: 6.0 km/h - Max. gradeability with/without load: 9% / 12% - Lift speed with/without load: 0.12 m/s / 0.27 m/s - Fully functional, general signs of use

Condition: used, functionality: fully functional, machine/vehicle number: 2488038, Year of construction: 2019, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 166 mm, load center: 600 mm, fuel type: electric, power: 1.5 kW (2.04 HP), battery capacity: 225 Ah, battery voltage: 24 V, battery weight: 219 kg, fork carriage width: 674 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 60 mm, ground clearance: 22 mm, turning radius (outer): 1,393 mm, front tire size: 230 x 70, rear tire size: 85 x 74, overall weight: 929 kg, total height: 3,720 mm, total length: 1,910 mm, total width: 770 mm, color: red, Equipment: pallet forks, Technical data - Year of manufacture: 2019 - Drive: Battery - Operation: Pedestrian - Load capacity: 1200 kg - Support arm lift capacity: 1600 kg - Lift height: 4.15 m - Height of mast extended: 4.60 m - Ground clearance: 150 mm - Load centre: 600 mm - Weight: 929 kg - Fork dimensions (L x W x D): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 1.91 m x 0.77 m x 2.14 m - Travel speed: 6.0 km/h Cgjdpfjyqzbcsx Agfsu - Max. gradeability with/without load: 9% / 12% - Lift speed with/without load: 0.12 m/s / 0.27 m/s - Fully functional, general signs of use

Condition: used, Year of construction: 1973, Column Spindle Press Ageo Type 60-960 Important Information: – The stated price applies only to self-collection. – Dismantling, loading, and transport are the sole responsibility and expense of the buyer. – Sale is from used stock, without guarantee or warranty. Csdswtnigepfx Agfjgu Inspection possible by appointment. I am happy to answer further questions.

Condition: good (used), Year of construction: 2022, Jungheinrich ECJ M10 Electric pallet truck Codpfjulibfjx Agfjgu Serial: F5004035 2022, electric pallet truck, max lift height 1540mm, length of forks 1150mm, mobile, 1Ph to charge

Condition: used, Year of construction: 2016, operating hours: 507 h, load capacity: 1,600 kg, lifting height: 4,430 mm, fuel type: electric, construction height: 1,930 mm, Yale High Lift Pallet Truck Yale * Model MS16IL AC * Total weight 1193 kg, without batteries 887 kg * Lifting capacity 1600 kg * Electric drive via battery with external charger (permanently mounted) * Dimensions (LxWxH): 2100 x 900 x 1930 mm * Forks 114 x 195 x 95 mm * Lift height 4430 mm Cgedpfx Aey Ag R Iegfou * 507 operating hours shown on the meter * Year of manufacture: 2016 * Forks are bent ----This description does not constitute a binding offer and may contain errors. No guarantee for the information provided. Please also visit our homepage

Condition: like new (used), Year of construction: 2015, STILL EGV S 14 (2015) Serial number: F20221F00330 Cedpfsy Nagpjx Agfjgu The truck is supplied with a charger included.

Condition: ready for operation (used), Pressure force: 10 tons Projection: 110 mm Codpohtq Hfjfx Agfsgu Required space: 300 x 170 x 680 mm Weight: 32kg

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Cedpfed D Ryfox Agfsgu with various punching tools

Year of construction: 1994, condition: good (used), machine/vehicle number: ST 151, Load capacity and weighing range: 2 t Fork length: 1100 mm Cgedjd Awntspfx Agfeu Fork width: 170 mm Load centre distance: 600 mm Lifting range: 78 - 198 mm Space requirement: 1500 x 560 x 900 mm Weight: 64 kg

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM FULL Manufacturing year 2026 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement Codpsd Tamdjfx Agfjgu - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Technical Data: - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm Cgjdpfx Asy D Rxrogfsu - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: new, Year of construction: 2026, turning height: 2,400 mm, rotary table diameter: 2,500 mm, table load: 30,000 kg, table diameter: 2,500 mm, warranty duration: 12 months, table speed: 112 mm/min, NEW 2026 – REM SCR 27 Manual Vertical Turret Lathe | Ø2,500mm | Made to Order Cost-effective, reliable manual VTL purpose-built for workshops needing robust large-diameter turning without the complexity and cost of CNC systems. WHY CHOOSE REM SCR 27? ✔ New 2026 – manufactured to order, fully customizable ✔ Zero gearboxes = lower maintenance, higher reliability ✔ No CNC needed — Digital Read-Out on all axes for precision ✔ No expensive programmer or specialist required ✔ Easy to operate, easy to learn, easy to service ✔ Unbeatable price-to-capacity ratio TECHNICAL SPECIFICATIONS: • Faceplate Diameter: 2,500 mm • Max. Turning Diameter: 2,500 mm + up to 300 mm • Machining Height: 2,400 mm Cgodpfev Hngtox Agfeu • Max. Workpiece Weight: 30 tonnes • Control: Conventional with full Digital Read-Out (DRO) per axis Made to order — can be customized to your specific requirements. IDEAL FOR: Central & Eastern Europe | Middle East | Latin America | Growing Production Shops Manufactured by REM Bacau – Romania | 60+ years of VTL expertise. Contact us for pricing, lead time, and full technical specifications.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, center height: 140 mm, spindle bore: 38 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, overall weight: 650 kg, total height: 1,650 mm, total length: 1,600 mm, total width: 1,000 mm, 3 Phase 380V motor is running smoothly! Both CNC & conventional turning are possible. Original Harrison CNC software installed. Geared headstock, gears run in oil bath. 9 spindle speeds adjustable from 52 up to 2000 RPM. Power feeds in both longitudinal and cross-slide directions. Norton gearbox for easy thread cutting. Quick change toolpost with a total of 4 holders included. MT3 tailstock taper. Camlock D1-3 spindle nose. Machine light, coolant pump integrated in base, chuck safety guard, and JOG mode included. Distance between centers: 800 mm Center height: 140 mm Spindle bore: 38 mm Made in the UK. Very good overall condition! Overall dimensions: 160 x 100 x 165 cm Weight: 650 kg Year of manufacture: 1992 Ex-college machine. Cgsdpfeywctnjx Agfsu We have the original (very rare!) power indexing 6-station turret set available for sale separately—see last 7 pictures. This turret is not included in the listed price but can be purchased additionally for €500.00 The turret set includes: - Original Harrison T280 turret - Original Harrison T280 turret control card (to be installed in the electrical cabinet) - Original turret activation button Includes accessories as shown in the pictures. Contact us for shipping options! €4,750.00

Condition: new, Forklifts and pallet trucks Jungheinrich – EFX 413 / AM 2000 X / EMC 110 / TMX 10 / BT SPE 125 Cgsdpjy H Evksfx Agfou

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Cgedpfx Aeyg Rfiogfju Weight: 600 kg Very good condition

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 26,200 h, load capacity: 1,600 kg, lifting height: 4,500 mm, free lift: 1,480 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, gearing type: automatic, battery capacity: 750 Ah, battery voltage: 48 V, front tire type: cushion tires (non-marking), rear tire type: cushion tires (non-marking), Equipment: cabin, lighting, pallet forks, sideshift, We are offering for sale a Jungheinrich EFG 216 electric forklift. Maintenance has been regularly carried out by Jungheinrich, and the forklift is in good technical condition. TECHNICAL DATA: – Manufacturer: Jungheinrich – Model: EFG 216 – Load capacity: 1,600 kg – Mast type: Triplex – Lifting height: approx. 4,500 mm – Overall height: approx. 2,050 mm – Free lift: approx. 1,480 mm – Drive: Electric – Year of manufacture: 2013 – Operating hours: approx. 26,197 h (read-off) – Battery: 48V / 750 Ah – Fork carriage: FEM 2A (incl. forks) – Front tires: Superelastic (solid rubber) – Rear tires: Superelastic (solid rubber) CONDITION / SERVICE BEFORE HANDOVER: - Fork tines - Pre-delivery inspection by qualified personnel - All fluids checked - Machine lubricated - Delivered cleaned and ready for immediate use No unnecessary effort after purchase – the forklift is ready for immediate operation. OPTIONAL SERVICES FOR AN ADDITIONAL CHARGE: - Cosmetic reconditioning - Nationwide delivery - Trade-in of your used equipment - New safety inspection (FEM/UVV) - Minor / major maintenance Cjdpfx Ageyzrm Esfogu VIEWING & TEST DRIVE POSSIBLE BY APPOINTMENT

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Cgjdpfxsyah Rvj Agfou Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: good (used), functionality: fully functional, Year of construction: 2022, operating hours: 20 h, load capacity: 1,000 kg, lifting height: 1,540 mm, free lift: 1,540 mm, fuel type: electric, mast type: mono, construction height: 1,950 mm, battery capacity: 50 Ah, battery voltage: 24 V, tire condition: 90 %, overall weight: 478 kg, Jungheinrich EJC M10 high-lift stacker, year of manufacture 2021 with simplex mast Data: Jungheinrich EJC M10 Year of manufacture: 2022 Read operating hours: 20 Mast type: Simplex Lift height (mm): 1540 Free lift (mm): 1540 Overall height (mm): 1950 Initial lift: No Load capacity (kg): 1000 Fork length (mm): 1150 Own weight (kg): 478 Front tyres: Polyurethane Rear tyres: Polyurethane Battery year: 2022 Csdpfx Ajyzrtlogfegu Battery capacity (Ah): 50 Battery voltage (V): 24 Equipment: Integrated charger. Note: Li-ion battery. Full free lift.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394T02117, Year of construction: 2006, operating hours: 5,130 h, load capacity: 5,000 kg, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, Machine in good working condition Cgodpfx Asvm Dk Uegfju

Condition: used, Year of construction: 2018, operating hours: 487 h, load capacity: 1,600 kg, lifting height: 4,350 mm, fuel type: electric, construction height: 2,500 mm, Still High Lift Pallet Truck Still, * Model EXV 16 L, * Total weight 1122 kg + 340 kg, * Load capacity 1600 kg, * Electric drive via battery with integrated charger, * Dimensions (LxWxH) 2050 x 870 x 1920 mm, * Forks 1150 x 180 x 85 mm, * Lifting height 4350 mm, * 487 hours read on the meter, * Year of manufacture 2018 Cedpfx Ageyq Aqfefogu ---- This description does not constitute a binding offer and may contain errors. No guarantee for the accuracy of all information. Also visit our homepage.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? Cgedpfx Agjfz Ndyjfju We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. Cgsdpfx Ajfz A H Dsgfeu There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Csdpfxsflrc Sj Agfogu - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.