Clamping table

BODE

Year of construction: 2003, condition: ready for operation (used), Load capacity: 25t, center of gravity distance: 700mm, eccentricity: 250mm, speed: 0.66rpm, tilt range: 0°-130°, tilt time: 120s, table height (flat): 1930mm, axis of rotation height: 1600mm, table diameter: 2500mm, motor power tilt/rotate: 7.5kW/4.5kW, total length: 3000mm, total width: 2500mm. Documentation available. On-site inspection is possible. Fpodpfxou Tiz Tj Afnec

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. Fedpfx Asfg E Hpofnepc • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, Year of construction: 1983, Additional title: lying tank in container Capacity: 32 hl Operating pressure: 2 bar Operating temperature: 20 °C Length: 4,65 m Width: 2,3 m Height: 1,95 m Weight: 2500 kg Fjdpoxbqrqsfx Afnopc Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Condition: used, Year of construction: 1985, Beer drive transport tank built into trolley, with CIP spray head and manhole. Includes measuring system (max. flow: 120 l/min). Additional title: horizontal tank in container Capacity: 7200 l Operating pressure: 2 bar Operating temperature: 20 °C Fpjdpfsxbqhxex Afnoc Length: 7,25 m Width: 2,4 m Height: 2 m Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Fsdpfowf Sfvex Afnjpc Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2009, load capacity: 300,000 kg, Model No: SAR 6000 Capacity 300 Rotation & Load Diameter Range 800mm min – 7000mm max c/w Variable Speed Pendant Control Warranty Period : 3 Months Parts Only This is a rare opportunity to purchase three identical sets of the very latest 2009 Bode Self-Aligning Rotators. These machines have had minimum use and are offered in first-class condition. I am confident the first to see these will buy. Fpedjvrdagjpfx Afnjc Each set has the added advantage of having anti-creep fitted to each idler unit. Offered at a huge saving against new we invite customers to view these at anytime at our depot in Oud Castle Netherlands, located approximately 30 minutes from Rotterdam.

Condition: good (used), Year of construction: 2014, load capacity: 50,000 kg, Manufacturer: BODE Type: VP50H Year of manufacture: 2014 Chuck Table diameter 2940 mm Tilting 0 - 135 Degrees Variomatic rotation Work load at 1000 mm gravity 50 Ton Work load at 1500 mm gravity 32 Ton Work load at 2000 mm gravity 27 Ton Specifications Metric US Standard There are no specifications (yet) for this machine. Dimensions (estimate) Length 6000 mm Width 3000 mm Height 3000 mm Fpjdjv Dh Uxspfx Afnoc Weight 19800 kg Please note: The information on this page is believed to be accurate and is provided to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, A used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500, is for sale. Technical specifications: Fodpfsv Epigox Afnspc Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as in the photos: 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + various adapters

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, Equipment: documentation/manual, Zayer mobile column milling machine, horizontal stroke 10000, vertical stroke 2500, slide stroke 1250, spindle 1800n, tool magazine 30 positions, year 1994, Heidenhain 415b control with 15" LCD display replaced last year, cone grinding October 2024 (iso50), always serviced. Currently in use. Fpjdpfx Ajwhd Alsfnoc

Condition: good (used), Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich Fpodpfxsfxlf Aj Afnjc -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg