Used Magnetic Clamping Table for sale (42,714)

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder Nedpfx Aaov Rxkdj Ejwr -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm -Weight: 13.3 kg

Condition: used, table length 1105 mm table width 220 mm Plate thickness 30 mm Nedpjd Ih T Aofx Aa Eswr weight ca. 300 kg dimensions 1105 x 220 x 150 mm T-slot - width 16 mm number of T-slots 1, Mitte total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm Nwsdothuzpjpfx Aa Ejr - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: good (used), machine/vehicle number: 21494, OFFER 21494 Technical data: Nedpfohii R Dsx Aa Ejwr - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circumferential water channel - 3 pieces T - grooves M 16 L 900 mm - lateral flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

Condition: good (used), Welding table with rotating device (self-construction) Plate 2000x1000mm Working height 640mm Nwodpfxofhnv Ao Aa Ejr t=28mm Weight approx. 1500kg Device is screwed to plate! Device can be moved by motor by 500mm Total height approx. 1750mm length 2700mm

Condition: used, 1,180 x 990 mm height 765 mm clamping slots width 34 mm material thickness 40 mm weight approx. 1,020 kg Njdpfxohtv T De Aa Eswr  

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Nsdpfjqddkvox Aa Eewr -Clamping table: milling machine table T-slot table -Table surface: 300 x 300 mm -Y-axis: 50 mm movable, rotary wheel with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 80 mm -Total dimensions: 420/330/H90 mm -Weight: 48 kg

Condition: ready for operation (used), agnetic table, magnetic work table, used machine Overall dimensions: Nwedou T H Nnopfx Aa Esr Length: 1500 mm Width: 500 mm Height: 80 mm Weight: 420 kg Electrical specifications: 55V DC

Condition: used, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic plate: 115 x 115 mm Clamping range: 110 x 75 mm Magnetic plate height: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Power input: 1 ampere Operating voltage: 24 volts DC (V/DC) Nwodpodz Sqxofx Aa Eor - Mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg Good condition Suitable for tool & die making for tapered, back-ground cutting plates or mold inserts.

Condition: good (used), OFFER 21100 Technical data: - Table dimensions approx. 1700 x 1700 mm - side length approx. 700 mm each - welded steel construction made of flat steel 100 x 30 mm Nwodpfogmnknex Aa Eer - table height approx. 850 mm - table surface approx. 2,3 qm² - various clamping tools - weight approx. 1500 kg

Condition: good (used), total length: 26,000 mm, total width: 15,000 mm, Dimensions: 2600x1500x170mm Nwjdpfxsth Sb No Aa Eor

Condition: used, clamping surface 1,330 x 530 mm clamping surface 1,330 x 600 mm - with drillings material thickness 55 mm weight approx. 615 kg Nsdpfx Aothtn Tea Ejwr

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table Nsdpfshubc Njx Aa Eowr -Table surface: 400 x 600 mm -T grooves: groove width 14 mm, groove spacing 50 mm -rotatable. by hand with 6x fastening screws -can be tilted and swivelled: via cranks -fits for Deckel Mikron WMW and other milling machines -Total dimensions: 700/600/H345 mm -Weight: 198 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Pneumatic clamping ensuring precise fixture of worked material, increasing cut accuracy and quality. This clamping is easy to assemble and operate. Technical data Clamping length 3200 mm Material height 100 mm Actuators 4 Nwodpfx Aevxtcqoa Eer Working pressure 2 bar Manufacturer: Cormak

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Nwodpswkvi Njfx Aa Eor Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: good (used), total height: 170 mm, total length: 3,000 mm, total width: 1,500 mm, Dimensions: 3000x1500x170mm Njdpfjth Smbjx Aa Ejwr

Condition: used, Clamping table, sine table, tilting table Nodeinldpopfx Aa Eowr Tilting clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Tilting angle: 2° Tilting angle max.: 7° - Tilting angle 2° via leadscrew - Max. tilting angle 7° manually lifted to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg Good condition Clamping plate, ideal for production of wedge strips

Condition: used, Round clamping plate with T-slots Straightening plate and clamping table Diameter Ø 1500 mm Centering bore Ø 80 mm Plate thickness 54 mm Working height 970 mm - 6 T-slots 18 mm - 3 threaded holes M20, pitch circle diameter 1000 mm - Steel base without central bore Weight 785 kg good condition Nedjv Ed Svopfx Aa Eowr

Condition: used, Year of construction: 2016, tank capacity: 6,000 l, GENERAL Equipment: Crane lugs Design: vertical Year of manufacture: 2016 Remarks: Manhole DN 600; outlet with bolted-on valve; no indication of double jacket acceptance in the inspection report (in a copy of drawing 1160246-1A / 1B there is a signed stamp 'Tested according to AD 2000 Code by TÜV Süd'); parts of the blind plugs may be available Speed: 495 rpm External diameter: 2,100 mm Internal diameter: 2,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,630 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Base type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates, statics, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Vacuum: 1.0 bar Volume: 6,000 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 1,400 mm Previous application: Pharmaceuticals VESSEL Max. permissible operating temperature: 135 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulating jacket: hermetically welded Insulation material: Armaflex Insulating jacket material: Stainless steel Insulation thickness: 50 mm EQUIPMENT Manhole/dome: in cylinder Nedpfx Aajxqawno Eowr Outlet: 187 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR 1 Agitator manufacturer: Metenova AB Voltage: 400 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Agitator position: bottom Top wall thickness: 5.8 mm

Condition: good (used), Clamping table, clamping angle, T-slot table, milling machine table for shaping machine, shaping machine, high-speed planer, broaching machine, slotting machine, slotting machine, slotting tool, broaching machine, shaping machine, horizontal shaping machine, planing machine, Schepping -T-slot plate: Mounting plate with adjustable angle of inclination -Groove width: 20 mm -Slot spacing: 105 mm -Overall dimensions: 640/400/H360 mm Njdpfxoiaql To Aa Eswr -Weight: 103 kg

Condition: used, Year of construction: 2019, tank capacity: 1,000 l, GENERAL Design: vertical Year of manufacture: 2019 Speed: 711 rpm Outer diameter: 1,120 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,100 mm Heating/Cooling: available Nwodpfx Aaexqawbs Eor Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: magnetic stirrer Mounting type: mobile on casters Location: Bremen Technical documentation: drawing, various documents, inspection certificate, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Vacuum: 1.0 bar Volume: 1,000 liters Double jacket volume: 5.0 liters Cylinder wall thickness: 5 mm Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,000 mm Previous application: pharmaceutical VESSEL Max. permissible operating temperature: 135 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head (DN 600) Outlet: 31 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4404 Feet material: stainless steel AGITATOR 1 Agitator manufacturer: Metenova AB Voltage: 400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator arrangement: bottom Top wall thickness: 5 mm

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: 3 loose load cells (functionality not guaranteed) included in the delivery Speed: 394 rpm Outer diameter: 1,154 mm Inner diameter: 988 mm Total height: 2,600 mm Heating/Cooling: available Insulation: available Nodpfxoxqauye Aa Eswr Power: 0.75 kW Max. perm. operating temperature: 130 °C Max. perm. operating overpressure: 3.0 bar Max. overpressure: 1.99 bar Agitator: Magnetic stirrer Support type: Feet Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Jacketed cylinder: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,100 liters Double jacket volume: 122.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 875 mm Last application: Pharmaceutical TANK Max. perm. operating temperature: 130 °C Number of feet: 3 units HEATING/COOLING JACKET Base temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manway / dome: in top head (DN 500) Note: Metallic discolorations inside Outlet: 38 mm MATERIAL PROPERTIES Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR 1 Agitator manufacturer: HANAG Steriltechnik AG Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Base wall thickness: 5.4 mm Agitator positioning: Bottom Top wall thickness: 4.5 mm

Condition: used, Year of construction: 2012, tank capacity: 100 l, GENERAL Equipment: Control cabinet (without guarantee) Design: standing Year of manufacture: 2012 Overall width: 1,000 mm Overall height: 1,750 mm Overall length: 900 mm Heating/Cooling: available Insulation: available Power: 1 kW Max. permissible operating overpressure: 5.0 bar Max. overpressure: 4.0 bar Top cover: removable / foldable top cover Agitator: magnetic stirrer Stand type: mobile frame Location: external storage Cylinder temperature control: double-jacketed Nameplate: Vacuum: 1.0 bar Nodpfjxqafxox Aa Ejwr Volume: 100 liters Double-jacket volume: 20.0 liters Product-contact material: V2A stainless steel Condition: used Last application: pharmaceuticals HEATING / COOLING JACKET Max. permissible vacuum: 1.0 bar INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FEATURES Manhole / dome: hand hole Discharge: available MATERIAL SPECIFICATION Temperature control system material: stainless steel AGITATOR 1 Agitator arrangement: bottom-mounted

Condition: used, Year of construction: 2014, tank capacity: 500 l, GENERAL Equipment: Control cabinet (without guarantee) Design: standing Year of manufacture: 2014 Remarks: Tank configuration (arrangement on the frame & connections/manhole in the top cover) may vary slightly Overall width: 1,050 mm Overall height: 1,750 mm Overall length: 900 mm Heating/Cooling: available Insulation: available Power: 1 kW Max. overpressure: 5.0 bar Top cover: removable / foldable top cover Agitator: magnetic stirrer Support type: mobile frame Location: external storage Nwedpfx Aasxqad Io Eor Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 500 liters Double jacket volume: 72.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used Previous application: pharmaceutical industry INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole/dome: handhole Outlet: available AGITATOR 1 Agitator arrangement: bottom-mounted

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Spray head Design: vertical External diameter: 1,300 mm Internal diameter: 1,100 mm Total height: 2,300 mm Heating/Cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Agitator: Magnetic stirrer Support type: Legs Location: Bremen Technical documentation: Drawings, TÜV papers, various documents Cylinder temperature control: Double jacket Name plate: Vacuum: 1.0 bar Volume: 1,000 liters Double jacket volume: 72.0 liters Cylinder wall thickness: 10 mm Wetted material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,000 mm Last application: Pharmaceuticals TANK Max. permissible operating temperature: 150 °C Number of legs: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Nwodpfsxqar Sex Aa Eer Insulation material: Mineral wool Insulation jacket material: Stainless steel EQUIPMENT Manhole/Dome: on top (DN 400) Outlet: available Outlet: 50 mm MATERIAL SPECIFICATION Temperering system material: V4A 1.4571 (AISI 316) Legs material: Stainless steel AGITATOR 1 Agitator manufacturer: Aprotec Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.6 mm Agitator arrangement: Bottom-mounted Agitator documentation: Various technical documents for the agitator available Top wall thickness: 6.3 mm