Used Lumber Stacking Line for sale (12,676)

Condition: used, Year of construction: 1999, machine/vehicle number: LC693, Used KRONES Sensometic VP-G filling line 12000 BPH for fruit syrup - Year 1999Technical Specifications & Performance DataThis KRONES complete bottling line is configured for filling raspberry syrup, various fruit syrups and special citrus vinegar at a filling temperature of 25 °C. Built in 1999, the line handles glass bottles and PET bottles in three documented formats, combining rinsing, filling, dual capping and cold-glue labeling within an integrated industrial packaging process.Maximum production speed: 12,000 bph with 0.7L glass bottlesProduction speed: 10,000 bph with 1.0L glass bottlesProduction speed: 6,000 bph with 1.5L PET bottlesCompatible formats: 0.7L glass, 1.0L glass and 1.5L PET bottlesElectrical supply: 240/400 V, 50 HzLine direction: left to rightAdvanced Automation & Control SystemsThe bottling equipment is controlled by a Siemens S5 115 U PLC. Electronic valve control is fitted to the three-channel KRONES Variojet rinser, while motorized height adjustment is provided on the filler upper section and on both capping stations. The labeling machine incorporates a horizontal, single-line laser dater for in-line coding.The Prontomatic labeling machine has a full protective enclosure and a lift-up monoblock design, supporting protected operation and access during routine line activities.Production Line Integration CapabilitiesDesigned as a complete used bottling line, this KRONES configuration integrates bottle rinsing, filling, screw capping, snap-on capping and multi-position labeling. Standard feeding, right-angle labeler infeed and transfer-screw container handling support continuous bottle movement through the labeling section. The line is suitable for industrial packaging applications involving syrup and vinegar products in glass and PET containers.Machine typeManufacturer / modelYearRinsing MachineKRONES Variojet 2.520-070-1131999Filling MachineKRONES Sensometic VP-G 050-113/SV 10/SOV 10-S1999Capping MachineAlcoa PP 10 / 360Capping MachineAlcoa K 10 / 360Labeling MachineKRONES Prontomatic 720-12-6-4-1801999PrinterLaser daterMachine Condition & Maintenance HistoryThe line is availa... Lredpfe Adtqxex Abysu

Condition: used, Year of construction: 2008, operating hours: 2,467 h, machine/vehicle number: LC690, Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed power: 120 kW.Required hall surface: approximately 500 m².Advanced Automation & Control SystemsThe PET bottle blow molding section uses infrared preform heating with 8 segments, 14 lamps and 550 mm heating elements. The SMF COMBI 400 machines operate with a 400 V, 3-phase, 50 Hz supply and have an installed power of 56 kW per machine. The labeling machine operates at 400 V, 50 Hz and is rated at 28 kW and 47 A.The AMER filling monoblock integrates rinsing, filling and capping in a compact process block. It is equipped with a HEPA filter and an integrated CIP aggregate with disinfection, supporting hygienic beverage production and efficient internal cleaning procedures.Production Line Integration CapabilitiesThis complete bottling line is designed as an integrated PET packaging solution for still water production. Preforms are handled by the SMF hopper and supplied to the blow molding machines, while air conveying transfers formed PET bottles toward the filling section. After rinsing, filling and capping, bottles are labeled with OPP foil and transferred to the shrink wrapper for pack formation.Machine typeManufacturer / modelYearBlow Molding MachineSMF Maschinenfabrik GmbH / COMBI 4002009ChillerSMF Maschinenfabrik GmbH / HT-6A2008Filling MonoblockAMER / BLOCK2008Labeling MachineSACMI LABELLING / OPERA 200 RF2008Shrink Wrapper Lredpfo Adtttex Abyou

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. Lrodpex Ah A Ajfx Abyju • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: used, Year of construction: 1995, operating hours: 26,000 h, machine/vehicle number: LC668, Used Tetra Pak TBA 8 V100 1000ml slim, helicap 23Technical Specifications & Performance DataThis second hand Tetra Pak complete aseptic carton filling line is configured for dairy production in slim 1.0L Brik carton packages. The core of the line is a Tetra Pak TBA 8 V100 filling machine, manufactured approximately in 1995 and showing approximately 26,000 working hours. A total refurbishment was completed in 2026, followed by a test run and inspection.Main filling machine: Tetra Pak TBA 8 V100Package format: Slim 1.0L aseptic carton packageSpeed: 6.000 TP/hProduct application: Dairy productionYear of manufacture: approximately 1995Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Advanced Automation & Control SystemsThe line is supplied as an integrated industrial packaging solution comprising filling, cap application, conveyor handling and wrap-around tray packing equipment. The Tetra Pak TCAP 45/47 cap applicator has been modified for HeliCap 23 and is designed to handle screw caps with pre-punched paper packaging material. The standard-layout conveyor installation provides product transfer between the listed process stages.Machines of this type are intended to operate as coordinated packaging machinery, enabling continuous movement of filled carton packs from the filler through closure application and secondary packaging. Final operational setup should account for the selected carton material, cap components, product process interface and required line controls.Production Line Integration CapabilitiesThis used bottling line is arranged for aseptic Brik carton handling rather than conventional PET or glass bottle processing. It combines a Tetra Pak filling machine with a dedicated screw-cap applicator, approximately 30 meters of conveyors and a tray packer for wrap-around trays. The equipment is suited to integration within a dairy beverage production and industrial packaging environment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1002001Capping MachineTetra Pak TCAP 45/47ConveyorsConveyorsWrap Around PackerTetra Pak TCBP 70The line can form a practical filling and end-of-line packaging section where cartons are filled, closed, conveyed and packed into wrap-around trays. Upstream dairy processing, hygienic product supply and downstream pallet handling can be matched to the requir... Lredpfx Ajzwu Unsbyeu

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Ljdpfx Abszxup Ijyoru Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW

Condition: refurbished (used), Year of construction: 2005, COSTA LEVIGATRICI C C 1350 , 1 bottom roller + 1 top roller Lredpfer I Atdox Abyeu

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 1568.14, Technical specifications: Lrodpfoz Dp D Ujx Abyeu Model: OptiCut S75-4 Maximum pusher length : 6300 mm Sawblade diameter : Ø 600 mm Year of construction: 2003 Maximum cross cutting sections : 360 x 30 mm / 240 x 160 mm Rotary current: 400 V / 50 Hz Nominal output: 11 kW Fuse protection: 25 A FRIULMAC 45 degree waste conveyer Outfeed : 1500 mm driven band conveyer Brand new software/control panel /PLC

Condition: used, Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Lredpfxjk Abnvo Abyeu Frame width: 500mm Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher several stretchers at outgoing goods For a customization, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, MEP Syntax Line 25 Automatic Rebar Processing Center, Used Machine Manufacturer MEP S.p.A. (Made in Italy) Model Syntax Line 25 Machine Functions Automatic straightening from coil Hydraulic cutting CNC-controlled bi-directional bending Processing Capacity (Rebar from Coil) Single-wire operation: Ø8 mm to Ø25 mm Double-wire operation: Simultaneous processing of 2 bars from Ø8 mm to Ø16 mm Material Storage Lrjdpfx Abjzg Uv Dsysu Storage capacity: Up to 14 m³ Manual loading Collection tray: 12 × 2.5 m Overall Dimensions Width: 17,400 mm Depth: 2,400 mm Height: 1,600 mm Condition The built-in monitor is not operational. The machine is equipped with a video output, allowing an external monitor to be connected for operation.

Condition: used, Year of construction: 2017, machine/vehicle number: LC677, Used Wild GoosePak canning line - Year 2017Technical Specifications & Performance DataThis used bottling line is a 2017 Wild Goose 4-head canning line configured for industrial packaging and beverage production in standard LOE aluminum cans. The line is identified as WGC-250 and includes Wild Goose M-250 equipment together with a Wild Goose Paralleltrain unit. It is configured for three established can formats, allowing operators to run multiple retail pack sizes within the same second hand canning system.Manufacturer: Wild GooseLine model: WGC-250Year: 2017Configuration: 4-head canning lineCan formats: 0.355L, 0.473L and 0.568L standard LOE cansElectrical supply: 110 VAdvanced Automation & Control SystemsThe line is described as functional and is arranged as an integrated can handling and filling solution. The supplied information does not identify a PLC type, while the 110 V electrical requirement should be considered during commissioning and site electrical planning. The equipment is supported by available manuals and spare parts, helping maintenance teams prepare routine service procedures and operational changeovers.Safety guards are not included. A buyer should evaluate the safeguarding arrangement, operator access points, interlocks and emergency-stop integration as part of installation planning and before production use.Production Line Integration CapabilitiesThis Wild Goose canning line combines depalletizing, can turning or rinsing and 4-head canning functions in a compact process arrangement. Empty aluminum cans are supplied from the depalletizer, pass through the twist rinser section and continue to the M-250 canning equipment. The configuration is suitable for integration with upstream product preparation and downstream coding, secondary packaging, palletizing and conveying equipment according to the required beverage production layout.Machine type/categoryManufacturer/modelYearDepalletizerWild Goose2017Can Twist ConveyorWild Goose Paralleltrain2017Filling MonoblockWild Goose M-2502017Machine Condition & Maintenance HistoryThe equipment is stated to be functional, supporting its use as a used bottling line for buyers seeking a ready-for-operation canning solution. Manuals are available and spare parts are available. Maintenance records are not supplied, so standard pre-installation inspection, cleaning, functional testing and service planning remain important steps for a smooth handover into production.Operational Performance & Versat... Lrodpfx Aoz E Df Asbysu

Condition: used, machine/vehicle number: 006601, Position 1: Panel Feeding and Loading PRIESS-BMA DLS-CNC Position 2: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Lsdpewuclrefx Abysru

Condition: used, machine/vehicle number: 007811, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 3: Panel Turning Device BIESSE - RBO-STREAM SB Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 5: Panel Turning Device BIESSE - RBO-STREAM SB Lodpfov Dyxcox Abysru Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB

Condition: used, machine/vehicle number: 005608, Position 1: Roller Conveyors STEFANI - MAHROS-EVOLUTION SB ONE Lrjdsiii Izjpfx Abyeu Position 2: Single Edgebanders STEFANI - MAHROS-EVOLUTION SB ONE Position 3: Roller Conveyors STEFANI - MAHROS-EVOLUTION SB ONE Position 4: Single Edgebanders STEFANI - MAHROS-EVOLUTION SB ONE Position 5: Roller Conveyors STEFANI - MAHROS-EVOLUTION SB ONE

Condition: used, Year of construction: 2007, Year: 2007 Condition: good, functional Configuration: DUPLO DBM-120 – Automatic Booklet Making Line - DUPLO DC-10/60 – 10-station collator. - DUPLO LUL-HM – Left-hand lifting and connecting module. - DUPLO DC-12JR – Vibrating jogger for paper alignment. Lodpfxoz R Uqcs Abyoru - DUPLO DBM-120 – Automatic booklet maker for wire stitching and folding. Technical Specifications: - Maximum production speed - 2,400 booklets/hour - Maximum sheet size - 320 × 450 mm - Minimum sheet size - 200 × 200 mm - Minimum sheet size with accessories - 148 × 210 mm - Maximum booklet size - 320 × 225 mm - Maximum capacity - 25 sheets of 80 g/m² - Number of stitching heads - 2 - Stitching methods - Saddle stitching, side stitching and corner stitching - Folding without stitching - Yes - Program memory - 13 programs - Dimensions - 1,300 × 700 × 550 mm Functions: - Automatic collating of individual sheets into sets. - Jogging, alignment and transportation of collated sets. - Wire stitching of booklets along the spine. - Folding of booklets to the final format. - Automated production of booklets, catalogues, manuals and other printed materials.

Condition: used, machine/vehicle number: 006017, Position 1: Vertical Storage Systems IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 2: Angular Beam Panel Saws IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 3: Panel Feeding and Loading IMA-COMBIMA SYSTEMS/N/I/R75/1110 Lrjdjwukzhepfx Abyju Position 4: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 5: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 6: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 7: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 8: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 9: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 10: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 11: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 12: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Ledpoxqzmwefx Abysru Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 - Operation: continuous from supply bin - Bin volume / drum Ø: 1.4 m³ / 1500 mm - Working height: 900 mm, left → right - Material / Housing: AISI 304 stainless steel + plexiglass - Safety: door switches, overload protection - Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar - Container size: round Ø ≤100 mm × 250 mm, larger on request - Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 - Filling: mass flow, 8 stations (expandable to 12) - Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h - Working height / direction: 900 mm, left → right - Product-contact parts: AISI 316, food-grade hoses, VITON seals - Tank / Pressure: 100 L, 5 bar - Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar - Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes - CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program - Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 - Operation: continuous rotary, 4 capping stations - Output: up to 5,000 containers/h - Container size: Ø ≤100 mm, H ≤300 mm - Working height / direction: 900 mm, left → right - Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools - Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar - Control: B&R controller, touchscreen, 200 format memories, password-protected - Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system - Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear Lrsdpfszzyd Asx Abysu * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps Lredpozzyd Nefx Abyeu * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: used, Year of construction: 2000, Fine bakery line Seewer Rondo SPF 602 Lrsdpfx Absz A Sdheyeu Condition: used, functional Year of manufacture: 2000 Calibrating head, year of manufacture 1996 Cutting station Spraying device Filling station Guillotine Includes cutting tools

Condition: used, Year of construction: 2002, Pastry line / Processing line Rondo Jumbolino SPF 610 C Ledpfoz A Spdex Abyoru Year of manufacture: 2002 Condition: functional Includes: cutting rollers, folding shoes, accessories, etc. Double cutting station Dough scrap/waste remover with collection container Spraying device Pneumatic filling device Spreading device Infeed roller Guillotine Belt running direction: left Belt width: approx. 640 mm Overall length: approx. 8250 mm

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent Ledpfx Abjzlqu Toyeru - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel Ledpfx Abjzpbazoyjru 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: new, mileage: 25 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Year of construction: 2026, Equipment: ABS, USB port, air conditioning, retarder, = Additional Options and Accessories = - Air conditioning for the driver - Air conditioning system Lrsdpfx Ajzwux Hjbysu = Further Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sales, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets Lodszytmzopfx Abyjru The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0700922, input voltage: 400 V, type of input current: three-phase, KÖNIG ECO TWIN 800 WITH CLASSIC REX T6/5S SK58 – 2018 Complete König line for the automatic production of rolls and bakery products. Year: 2018 The line consists of a König Classic Rex T6/5S dividing-rounding machine combined with an Eco Twin 800 pre-fermentation and shaping line. Features: * Manufacturer: KönIG * Model: Eco Twin 800 * Year: 2018 * Dividing head: Classic Rex T6/5S * Piston size: SK58 * Weight range: 35 to 85 g * Operation in 5 or 6 rows * Nominal width: 800 mm * Eco Twin capacity: * Up to 5,040 pieces/hour in 6 rows * Up to 4,200 pieces/hour in 5 rows * Maximum capacity of the Classic Rex head: * Up to 9,000 pieces/hour in 6 rows * Up to 7,500 pieces/hour in 5 rows * Integrated pre-fermentation * Siemens Simatic control * Integrated elongation roller * Automatic product depositing onto baking sheets * Several interchangeable stamping tools available * Quick tool changes * Cutting/stamping station depending on configuration Products that can be produced: The line allows for the production of a wide variety of rolls, including: * Round rolls * Stamped rolls * Kaiser rolls * Cut rolls * Elongated rolls * Elongated and cut rolls * Elongated and stamped/pressed rolls * Double rolls * Various special shapes depending on the stamping tool used Several stamping tools are available with the line. The Eco Twin is a compact and versatile line that allows for the production of a wide variety of products with quick changeover times. Machine can be viewed and tested by appointment. Lrjdpszyv Nrsfx Abysu Photos, videos, and additional technical information available upon request. Photos taken before cleaning.