Used Lms for sale (439)

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Codpfx Absu Ebufebeaa Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: used, mileage: 328,280 km, power: 353 kW (479.95 HP), first registration: 03/2022, fuel type: diesel, overall weight: 40,000 kg, gearing type: automatic, Equipment: soot filter, Vehicle number: 253472 Single owner, accident-free, full service history, non-smoker ---- DRIVER ASSISTANCE SYSTEMS * Lane change warning system ENGINE, TRANSMISSION & CHASSIS * Traction control system (ASR) EXTERIOR * Exterior sun visor OTHER FEATURES * ZF Intarder Additional Features Caodpox A Rryjfx Abbsa * Emission standard Euro 6 * 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 * MX-13 engine, 355kW/483hp, cab emblem: 480 * Mechanical differential lock * Rear axle ratio 2.21 * Electrically operated roof hatch * Refrigerator and drawer * Luxury LED interior lighting * Front underrun protection * LED work lights * Steel air reservoir * LED taillights * Kingpin diameter 2 inches * Fifth wheel setting 670 mm * JOST JSK37C, cast iron, 150 + 12 mm * Electrical connections for trailer 24V/2x7-pin cables: 2x7-pin + EBS * Sleeper High Cab * Two LED lights for rear cab panel * LED skylights * Electronic Stability Control (VSC) * Adaptive Cruise Control with FCW and AEBS-3 * Alternator 110 A, batteries 2 x 210 Ah AGM ---- Interim sale and errors excepted. The vehicle description serves solely for general identification purposes and does not constitute a warranty in the legal sense of sales law. The exact scope of equipment will be provided by our sales staff. Please contact us.

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Cajdpexy R Ezjfx Abbja

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Machine weight 3500 kg Control Unit Brand FANUC Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Turret Number of turrets 1 Cajdpfx Abjxwqtaebsa Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, Equipment: type plate available, The system has been professionally dismantled and placed in storage. Viewing by appointment only. Original price: €207,000.00 1. Modular Safe Units Pos. Article No. Description Qty. Unit Price (€) Total (€) Notes 1 70004226 Lampertz Modular Safe LMS 9.3 – 47U, left link 1 10,000.00 10,000.00 Housing RAL 7035, approx. 750 kg, 2 locks, 2 keys 2 70004225 Lampertz Modular Safe LMS 9.3 – 47U, center link 1 10,000.00 10,000.00 Housing RAL 7035, approx. 700 kg, 2 locks, 2 keys 3 70004224 Lampertz Modular Safe LMS 9.3 – 47U, right link 1 10,000.00 10,000.00 Housing RAL 7035, approx. 750 kg, 2 locks, 2 keys _____ 2. Additional Equipment and Electronics Pos. Article No. Description Qty. Unit Price (€) Total (€) 4 70004223 Electronic lock prepped for card reader 3 499.00 1,497.00 5 70004222 Cable feed-through in floor element 3 1,617.00 4,851.00 6 70004221 Liquid Cooling Package (LCP) 2 5,590.00 11,180.00 7 70004220 Cooling module for LCP 4 kW 4 1,090.00 4,360.00 8 70004219 LMS 47U LCP accessory kit 2 209.00 418.00 _____ 3. Cooling and Water Connections Pos. Article No. Description Qty. Unit Price (€) Total (€) 9 70003682 Primary supply line 1 1 9,560.00 9,560.00 10 70003682 Primary supply line 2 1 9,545.00 9,545.00 11 70003682 Supply line WWT + secondary 1 2,296.00 2,296.00 12 70003682 Connection fittings and WWT 1 38,075.00 38,075.00 13 70003682 Ancillary services and general 1 4,623.00 4,623.00 _____ 4. Accessories and Fittings Pos. Article No. Description Qty. Unit Price (€) Total (€) 14–18 70004217–70004213 19" blank panels (1–6U) 5 22–68 208.00 19 70004196 Special base LMS 9.3 3 699.00 2,097.00 20 70004212 19" mounting rack 47U 3 690.00 2,070.00 Cajdpexpnwmjfx Abbea _____ 5. Safety & Monitoring Pos. Article No. Description Qty. Unit Price (€) Total (€) 21 70004211 DET-AC Plus Master Kit automatic fire suppression 1 3,526.20 3,526.20 22 70004195 DET-AC Plus slave devices 2 2,716.20 5,432.40 23 70004196 CMC-TC monitoring package (temperature, humidity, alarm) 1 4,030.00 4,030.00 24 70004210 LED alarm signal 24V red 1 27.00 27.00 25 70004197 Signal column connection module 1 15.00 15.00 26 70004198 CMC-TC 1U sensor unit 1 42.00 42.00 _____ 6. Power Supply & Cabling Pos. Article No. Description Qty. Unit Price (€) Total (€) 27 70004199 PSM power rail 3 130.00 390.00 28 70004200 Mounting kit for PSM 3 11.00 33.00 29 70004201 PSM 6-way cold appliance plug-in module 18 49.00 882.00 30 70004202 PSM 4-way Schuko plug-in module 3 29.00 87.00 _____ 7. Auxiliary Systems Pos. Article No. Description Qty. Unit Price (€) Total (€) 37 70004196 Modular UPS System 40kVA (three-phase) 1 38,720.00 38,720.00 38 70004207 Raised floor & frame adaptation 1 1,278.00 1,278.00 39 70004207 Electrical installation & switch cabinet UPS/air conditioning 1 7,940.00 7,940.00 42 70004209 Software license SNMP UPS shutdown 5 36.00 180.00

Condition: used, Year of construction: 2015, air flow quantity 1800 m³/h suction power 1,275 kPa power capacity 1,5 kW weight ca. 125 kg Dimensions (HxWxD) 2,0 x 1,15 x 0,67 m One used oil dust collector Cedpfjvvxr Sox Abbjaa - Produced in 53809 Ruppichteroth/ GERMANY - 3,13 A/ 50 Hz - 3AC 400 PE

Condition: excellent (used), Year of construction: 2004, overall weight: 500 kg, ATEX air micronizer mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High-efficiency equipment, highly suitable for the micronization of all types of powder products. Includes bag filter reference C9905. Codpexpx Agefx Abbsaa

Condition: used, mileage: 199,393 km, power: 353 kW (479.95 HP), first registration: 03/2022, fuel type: diesel, overall weight: 20,500 kg, gearing type: automatic, Equipment: air conditioning, soot filter, Vehicle number: 253200 1 owner, accident-free, fully serviced, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system ENGINE, TRANSMISSION & CHASSIS * Traction control system (ASR) INTERIOR * Air conditioning * Sun visor OTHER EQUIPMENT * ZF Intarder Additional features ---- Colour / Paint ---- Cab colour: H3329GREE * Chassis colour: Grey ---- Tyres / Wheels ---- F1, 385/55R22.5 MI XMF 160/000 K Steering BB72-2 * R1, 315/70R22.5 MI XMD 154/150 L Traction DC75-2 * Steel disc wheels, silver grey ---- Equipment / Special Equipment ---- Front axle 8T * Rear axle 13T * MX-13 engine, 355 kW / 483 hp * Automated TraXon gearbox, 12 gears * Permissible gross chassis weight max. 20,500 kg * AdBlue tank 90 l on left fender * Emissions class Euro 6 * Mechanical differential lock * Wheelbase 3.80 m / rear overhang 0.99 m * Cab width 2550 mm * Dust shield * Two-stage water pump * Rear axle ratio 2.38 * Single front axle * Single rear axle * First steering arm height 84.5 mm * With ECAS air suspension * Splash protection * LED work lights * AdBlue tank 90 l, on left fender * Aluminium air reservoir * EAS unit on right side * LED rear lights * Electric glass roof hatch * Water heater * Automatic cab climate control * Auxiliary power supply: standard + 2x 40 A * Auxiliary power supply: standard + 2x 40 A * Jost JSK42CW, cast iron, low maintenance, 150 mm * Mounting plate for fifth wheel coupling 12 mm * Kingpin diameter 2 inches * Fifth wheel lead 670 mm * Electrical connection 24 V / 1x 15-pin * Trailer lighting cable 1x 15-pin * Trailer cable EBS * Fog lights * Skylights * Adaptive cruise control with FCW and AEBS-3 * Predictive cruise control * Electronic stability control (VSC) Csdowk Abxopfx Abbjaa ---- Subject to prior sale and errors. The vehicle description is for general identification only and does not constitute a warranty in the legal sense of the purchase agreement. For the exact scope of equipment, please consult our sales staff. Contact us for further information.

Condition: new, Siemens 6FX1120-0AA00 PLC Card memory module MS125-B Vers 02 < unused > in opened OVP 100 % functional Caodpji Ed Nxsfx Abbsa

Year of construction: 1988, condition: used, Steel grinding machine Simon L 15 Right and left table support adjustable Diamond grinding wheel Cjdpfx Abjhrza Nobjaa

Condition: used, Year of construction: 1969, grinding wheel diameter 150 mm no. of working stations 2 turning speeds 2800 U/min total power requirement 0,55 kW Cajdpfewntymsx Abbja - grinding wheel dia. 150 mm - polishing wheel dia. 125 mm

Condition: excellent (used), functionality: fully functional, empty load weight: 411 kg, digging bucket width: 1,750 mm, Year of construction: 2015, machine/vehicle number: 2015-2222, Cseri, German manufacturer, tiltable ditch cleaning bucket, MS 08 mount, capacity 360 liters. Cajdpfx Abow Aguyobja

Condition: used, empty load weight: 9,620 kg, maximum load weight: 24,380 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/1986, loading space length: 11,600 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 66 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, BPW axles, air-suspended, lifting+lowering, ABS (anti-lock braking system), catwalk, tarpaulin, U-protection, lateral aluminum driving protection, supports, side outlet, rear outlet Superstructure: Large-capacity silo with 4 discharge hoppers approx. 41m³ and additional built-in tank approx. 25m³ (total volume approx. 66m³), hydraulically driven pump and tarpaulin 3x BPW axles! Conversion to combi liner approx. in 2013! Tank in tank system! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cjdpsvhkarsfx Abbjaa - .

Condition: used, mileage: 298,000 km, power: 353 kW (479.95 HP), first registration: 08/2022, fuel type: diesel, overall weight: 40,000 kg, gearing type: automatic, Equipment: air conditioning, soot filter, Vehicle number: 253452 1st owner, accident-free, full service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system ENGINE, TRANSMISSION & CHASSIS * Traction control system (ASR) INTERIOR * Air conditioning * Sun visor LIGHTING & VISIBILITY * LED headlights OTHER EQUIPMENT * ZF retarder Additional features * Driver’s seat: Luxury Air * Auxiliary water heater * Timer for auxiliary heater * Electrically operated roof hatch * Automatic cab climate control * Cab width 2550 mm * Drive rear axle with disc brakes * Fog lights and cornering/turning lights * Wheelbase 3.80 m / rear overhang 0.99 m * Front underrun protection * Splash protection * AdBlue tank 90 l, on left fender * Aluminium fuel tank, height 620 mm * LED tail lights * Longitudinal frame 260/6.0 mm, without internal reinforcement * Aluminium fuel tanks 845 + 340 l, step, height 620 mm * MX-13 engine * Automated transmission, TraXon, 12-speed * Rear axle ratio 2.53 Csdpfjxuzc Hox Abbsaa * Adaptive cruise control with FCW and AEBS-3 * Predictive cruise control * Digital tachograph, VDO 1C, version G2V1 * Jost JSK37C, cast iron, 150 mm * Mounting plate for fifth wheel, 12 mm * Fifth wheel position 670 mm * Kingpin diameter 2 inches * Electrical connection 24 V / 2 x 7-pin * Basic immobilizer * Electronic stability control (VSC) * Alternator 80 A, batteries 2 x 210 Ah AGM ---- Subject to prior sale and errors excepted. The vehicle description serves solely for general identification of the vehicle and does not constitute any warranty in the legal sense. For the exact equipment details, please contact our sales staff. Please get in touch with us.

Condition: new, Siemens 6FX1120-0AA00 PLC Card memory module MS125-B Vers 01 < unused > in opened OVP 100 % functional Cajdpfx Aoi Ed Nusbbja

Condition: new, Year of construction: 2024, Underfloor light metal circular saw Make: METALLKRAFT Model: ULMS 420 Item no.: 3627420 Condition: New machine Cutting area (square): 120 x 120 mm Speed: 2900 rpm equipped as standard with: Caedpfx Astuch Ejbbea - Saw blade 420 x 30 x 4.0 mm Z 120 - minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction sockets for connection to an extraction system - Operating instructions

Condition: refurbished (used), Year of construction: 2022, operating hours: 50 h, EDM313MF30-SLM (second-live machine) Technical data: Travel XxYxZ 620x420x400mm workpiece clamping table 1000x600mm container size 1070x600mm Filling height work tank 400mm distance table/electrode holder 150/550mm Workpiece weight max.1500kg Machine dimensions 2550x2430x2500mm Machine weight 3900kg Equipment: Painting silver metallic New control cabinet New control win10 User interface MF30 Screen touch panel Manual control panel New filling filter + rinsing pump (speed controlled) Generator exopuls+60A working current Caedpfx Abshwwtzoboa Table steel/slots Electrode changer 20-fold Co² extinguishing system Warranty 12 months completely new electrics New drives with Endat linear measuring system resolution 0,0001mm New ball screw, bearing Cooling unit integrated Cartridge filter Automatic head chuck

Condition: good (used), Year of construction: 2002, ILT UNIFIL MS 1MRV40 – Industrial Air Filter / Extraction System for Oil and Emulsion Mist Technical Specifications: Manufacturer: ILT Industrie-Luftfiltertechnik GmbH Model: UNIFIL MS 1MRV40 Year of Manufacture: 2002 Serial Number: 8160 Voltage: 3AC 400V Current Consumption: 3.2 A Frequency: 50 Hz Air Flow Rate: Approx. 2,700 m³/h (free-suction) Motor Power: 1.5 kW (Manufacturer: Siemens) Filter Stages: Multi-stage with pre-filter, main filter, and optional post-filter Housing Material: Robust sheet steel construction, painted Dimensions: Approx. L 1,145 mm x W 670 mm x H 1,150 mm Weight: Approx. 120 kg Connection: Pipe connection for exhaust air duct Available Condition: Used, functional, regularly serviced Description: For sale is a professional ILT UNIFIL MS 1MRV40 extraction system, a high-quality air filtration system for the efficient separation of oil and emulsion mists generated in metalworking and other industrial processes. The unit was specifically designed for continuous operation and does not require regeneration phases. It is ideal for turning, milling, grinding, and machining centers where airborne contaminants must be effectively filtered. Special Features: ✔ Highly efficient air filtration: Multi-stage filter system with washable pre-filters for a long service life ✔ Modular design: Filter inserts are replaceable and adaptable for different applications ✔ Energy efficient: Low power consumption with high extraction performance ✔ Robust construction: Sturdy housing for industrial environments, durable components ✔ Flexible installation: Can be installed directly on machines or centrally ✔ Easy maintenance: Tool-free filter replacement, low operating costs Cjdpfxsv Nv Nbe Abbsaa ✔ Made in Germany: High quality and reliable performance Areas of application: CNC machining centers Lathes, milling machines, and grinding machines Metal and plastics processing Industrial air purification in production facilities Oil and emulsion mist separation Shipping by freight forwarder available upon request Sold without warranty or guarantee. If you are interested or have any questions, please contact us!

Condition: like new (used), Year of construction: 2022, operating hours: 1,496 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, type of input current: AC, overall weight: 3,600 kg, power: 30 kW (40.79 HP), input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, 5-axis CNC lathe "DN Solutions model LYNX 2100LMSA" with sub-spindle, driven tools and CNC FANUC i-PLUS iHMI complete with "TOP model FUSION" bar loader. Caedpfx Ajtq Aylsbbea

Condition: used, mileage: 280,000 km, power: 353 kW (479.95 HP), first registration: 12/2022, fuel type: diesel, overall weight: 40,000 kg, gearing type: automatic, Equipment: soot filter, Vehicle number: 253451 Single owner, accident-free, full service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system ENGINE, TRANSMISSION & CHASSIS * Traction control system (ASR) EXTERIOR * External sun visor OTHER EQUIPMENT * ZF intarder Additional features * Automated TraXon transmission, 12 speeds * Rear axle ratio 2.21 * Electric roof hatch * Luxury LED interior lighting * Auxiliary heater with waste heat pump and timer * Wheelbase 4.00 m / rear overhang 0.99 m * Front underrun protection * Splash protection * LED work lights Codpfjxuzcysx Abbeaa * Fuel tanks left and right * Rear lights with LEDs * Longitudinal beams 260/6.0 mm, without internal reinforcement * Fifth wheel setting 620 mm * Pneumatic trailer connection, rotary coupling * JOST JSK37C, cast iron, 150 + 12 mm * Electrical trailer connection 24V/2x7 pin cable: 2x7-pin + EBS * XG cab * Two LED headlights for rear cab wall * LED skylights * LED headlights, cornering and fog lights * Driven rear axle with disc brakes * Pneumatic control for parking brake * Rear axle load capacity 13.00 t * Axle load monitoring * Electronic stability control (VSC) * Adjustable roof spoiler for XG cab * Adaptive cruise control with FCW and AEBS-3 * Digital tachograph, VDO 1C, version G2V1 * DAF Infotainment Luxury Plus, Luxury speakers * Alternator 110 A, batteries 2 x 210 Ah AGM ---- Subject to prior sale and errors excepted. The vehicle description is for general identification purposes only and does not constitute a guarantee in the legal sense of sales law. For the exact scope of equipment, please contact our sales staff. Please get in touch with us.

Condition: like new (used), functionality: fully functional, mileage: 9,970 km, power: 102.97 kW (140.00 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 03/2023, loading space length: 4,250 mm, loading space width: 2,100 mm, loading space height: 2,290 mm, color: red, number of seats: 3, number of previous owners: 1, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), truck registration, THIS IS A VAN IN LIKE-NEW CONDITION. AVAILABLE WITH INSTALLMENT PAYMENT OR LEASE OPTIONS. CARGO AREA DIMENSIONS: INTERNAL LENGTH 4.25 M – WIDTH 2.10 M – INTERNAL HEIGHT 2.29 M. Casdpewx N Saofx Abbsa

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Cedpfsu Ttf Njx Abbeaa Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: good (used), - Bundle packer for shrink films - Dimensions 1780 x 1480 x 2105 mm (L x W x H) - Working width 500 mm, good condition ready for use - Wide range of use, comes from current production Caedpfxer Ndi Is Abbsa - Connected loads 380V, 10A, 50Hz, 5kW - Price 1.500,00 €

Condition: like new (used), Wrapping Films in Various Types, Like New Condition 🧰 Product Features • Manufacturer: Sealed Air, Foli Pack, Mima Lite • Model: various types • Condition: like new, see photos • Colour: transparent Codpfx Ajw N Ny Debbsaa • Thickness: 15 - 23 μm • Length: 1,000 - 4,200 m Available Films: 2 pcs. Foli Pack 250 mm x 1,000 m 2 pcs. Sealed Air 455 mm x 2,150 m 2 pcs. Sealed Air 605 mm x 2,150 m 12 pcs. Foli Pack 400 mm x 1,000 m 19 μm 18 pcs. Foli Pack 500 mm x 1,250 m 15 μm 23 pcs. Stretch film 500 mm x approx. 3,000 m 23 pcs. Mima Films 440 mm x 4,200 m 30 pcs. Stretch film 500 mm x approx. 4,200 m 23 μm 💰 Price: €1,200 net excluding VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constant stock of over 5,000 linear metres of pallet racking from various manufacturers (Subject to change and error in technical data, specifications, and prices as well as prior sale! See our Terms and Conditions; all prices excl. VAT ex stock.)

Condition: used, Year of construction: 2017, load capacity: 30 kg, Manufacturer: Manut LM Model : MAN Year: 2017 Cajdpfox Avpkex Abbea Body type : Vacuum Tube Manipulator Application : Handling of bags and boxes Maximum load : 30 kg Classification: ATEX Vacuum pump : Becker SV 8 400/2 Dimensions : see photo drawing.