Used Linematic Maschine for sale (1,459)

Condition: new, Year of construction: 2025, New machine immediately available Capacity: 1520 x 2.25 mm segment-split upper cheek rail -tool rest Dsdpeh S Uirjfx Afnjkh -Adjustment of the upper beam by hand lever left/right

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping Dkodjfifbbspfx Afneh High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Dsdpfx Afjfifa Ajnekh Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Available in following capacities: 1100 x 4/1100 x 5/1100 x 6 mm 1370 x 4/1370 x 5/1370 x 6 mm 1600 x 4/1600 x 5/1600 x 6 mm 2100 x 4 2600 x 4 mm 3100 x 4 mm Standard features: -NC controlled backgauge 750 mm with recirculating ball spindles -NC controller including cutting counter -Single cut, continuous cut and inching mode changeover -mobile foot switch with EMERGENCY STOP Angle stop on the left side with T-track -Table extension -Roller balls in the table -manual cutting gap adjustment from the front -Cutting line lighting - All-steel knife 2-edged - Sheet metal hold-down device with hard rubber strip to protect polished sheets -Light curtain on the back of the machine instead of a safety grille (CE) -Foldable front security grille (CE) -Optical function display on the front of the machine -CE conformity -2 years full guarantee -3 years on engine and gearbox Optional accessories: -Adjustable angle stop with degree scale and mm graduation -pneumatic sheet metal holder -ELGO 9521 NC controller -Sheet ejection to the front - Sheet ejection to the front including a pneumatic sheet holding system (optional sheet ejection to the front or back over the entire cutting length with NC controller FUJI touchscreen (return to sender) -Table extension with tilt stop and T-slots -Special knife for VA steels -Special color on customer request Dksdegu N E Djpfx Afnjh

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: A-08/420, Band width: 500 mm Dedpfx Ajyfv A Defnjkh Material thickness: 0.8 - 5 mm Straightening roller diameter: 80 mm Number of straightening rollers: 7 Adjustable entry height Clear pass-through: 505 mm Oiling system Roller basket Band guide: 505 mm

Condition: used, Technical details: Dodpoyhwnrjfx Afnokh Manufacturer: Maschinenfabrik ECKER & SCHMIDT 400V, 0.65/0.9 kW height-adjustable table

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm Dkjdeu Hiq Ropfx Afnsh See pictures for more technical data

Year of construction: 2013, condition: used, functionality: fully functional, compressed air connection: 8 bar, continuous operating pressure: 6 bar, machine/vehicle number: 375405, Hot stamping machine RS Druckmaschinen Type 75 with conical round printing unit and sliding table. Suitable for embossing thanks to the sliding table, but used for photorealistic decoration of reusable cups with image-decor foil using the conical round stamping process. Includes a teach box for setting the print area in round stamping and features electronic pressure monitoring. Dkodpfx Afjyc Ny Reneh

Condition: new, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Dksdpfsuladkex Afneh

Condition: new, sweeping width 2000 mm dimensions 2350 x 1450 x 1000 mm weight of the machine ca. 350 kg working width 2000 mm, dirt collection tray 300 ltr, Sweeper for forklift, wheel loader, Hoftrac, with leveling and front support wheel, PPN roller brush 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilting device, height-adjustable support wheels with metal rims, Dksdpfjulnbqjx Afnsh hydraulic drive, hoses and couplings. Extra storage on the hydraulic motor, Pockets W/H: 200x70 mm. Weight approx. 350 kg. - Made in Germany, powder-coated. Incl. side sweeper 600mm Ø with drive

Condition: new, sweeping width 1750 mm weight of the machine ca. 300 kg dimensions of the machine ca. 2100 x 1450 x 1000 mm Sweeper for forklifts, wheel loaders, Hoftrac, working width 1750 mm, dirt collection tray 250 liters, with level compensation and front support wheel, PPN sweeping roller 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilt adjustment, height-adjustable support wheels with metal rims, hydraulic drive, hoses, and couplings. Extra bearing on hydraulic motor, drive pockets W/H: 200x70 mm. Dkedpfxsu H N Tle Afnoh - Made in Germany

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system Dedpfx Afjkahu Usnokh - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: Dksdpfx Afettah Rsnsh → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Djdpfxetr U Hlj Afnjkh Weight: approx. 1200 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Djdpfsg Dvdcex Afnokh Made in Germany The pictures show you an older bigger machine

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system Dkedpottagdefx Afneh - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process Dsdpegu Nmhsfx Afnokh - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany Dksdpfx Afsx Ebzqjneh The pictures show you an older bigger machine

Condition: good (used), We are looking for a cycle-controlled lathe with Siemens control system—no other controls will be considered. Distance between centers up to 2,000 mm for heavy-duty and series turning work for our own use. Swing over bed up to approx. 570 mm. Swing over cross slide up to approx. 340 mm. Spindle bore at least 83 mm in diameter—larger would be preferable. The images are for illustration purposes only. Please feel free to offer us your lathe! SFT GmbH Tiefbohrzentrum Dkodpjyg D Nhjfx Afnsh Riedericher Str. 95 72661 Grafenberg

Condition: refurbished (used), Year of construction: 2001, XXL-Center RAS 75.06 - General technical data (in mm): Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper jaws travel range: 10 – 750 mm Clearance in front of jaws up to: 300° Extendable loading tables: yes Gripper jaws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2001 Condition: To be completely overhauled - Images are for reference only - Dkjdpfx Afex Hf Tveneh

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Dkodpfsyf A Erjx Afneh Further technical information can be found in the datasheet in the images or on our website. For wheel loaders from 15 t Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001

Year of construction: 2024, condition: used, machine/vehicle number: TSC.153.042, Wolf Bucket Separator Terra-Star Compactline TSC.153 continually astonishes customers with its high throughput. The TSC.153 requires only 20 to 30 seconds for a capacity of 0.95 m³. With 50 fillings, this results in well over 45 m³ per hour. The ability to quickly and easily change the shafts makes the Terra-Star Compactline series unique in the market. Djdpfjw Rqz Esx Afnekh The separator is equipped with screening shafts and star discs with a separation gap of 15mm – producing a grain size of 0-20/25 mm. Tools in the wear zones are armoured with hardfacing wire. Price without adapter For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 34 - 50 m³/h Drain line connection required: 2

Year of construction: 2025, condition: new, Terra-Star Powerline TSP.184, cutting width 1800 mm, this machine delivers exceptional throughput thanks to its 4 shafts! Equipped with M80X mixing shafts, armored in wear zones—providing a grain size of 0–60/80 mm. Suitable for mixing lime and blended binders, breaking up clumped material, and separating stones, branches, roots, etc. Price without adapter For excavators from 32 t Dsdpfx Afsyf Avkonokh For wheel loaders from 17 t Weight in kg: 3100 Throughput: 78 – 120 m³/h. Leak oil connection required: 1 Series: TSP.184.023

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers enormous throughput thanks to its 4 shafts! Mixing in lime or mixed binders for soil drying, blending with compost, sand, other soil types, etc., with simultaneous crushing of soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle rocks in construction debris such as pumice, bricks, Poroton, while simultaneously separating the fragments by size; larger and harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! Suitable for excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Dkodpjyf Avdofx Afneh Throughput: 64 - 95 m³/h Leakage oil connection required: 1 Series: TSP.154.132

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers an enormous throughput with its 4 shafts! Ideal for mixing and shredding, it aerates material, suitable for compost and liquid soil. High throughput even with wet soil. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight in kg: 2300 Throughput: 64 – 95 m³/hr Leakage oil connection required: 1 Series: TSP.154.131 Dedpfeyf Au Tsx Afnekh