Used Line Boring Machine for sale (68,953)

Condition: used, spindle diameter 90 mm x-travel 1250 mm Rsdpfjyuqg Nox Acvsr y-travel 1120 mm z-travel 1400 mm w-axis 710 mm spindle turning speed range 28 - 1400(x18) U/min tool adaptor MT 5 Table dimensions 1000 x 1120 mm Facing head, 3 axis digital read out, spindle support and tailstock.

Condition: excellent (used), Number of agregats 1 St. Motor output 0,37 kW connected load frequency 230 V Lock width 6x6 mm Rectangular drilling machine or mortising machine Scheppach type St 12 for drilling or mortising rectangular holes Rodpoyvkt Tjfx Acvor for doors, windows or similar applications.

Condition: excellent (used), DB5 dowel hole drilling machine & row drilling machine - 21 drilling spindles - 32mm spindle pitch - 380 volts - 2.2 kW Rjdpfx Acsytvarovor - Dimensions: length 1400mm x depth 900mm x height 1300mm - 2 pcs longitudinal stops

Condition: used, Year of construction: 1984, Dowel boring machine Year of manufacture: 1984 Suitable for: Row drilling Cabinets Redpfjyulftox Acvsr Fittings Frames Standard swiveling device Max. passage: 820 mm Working width: 704 mm 23 drilling spindles; 32 mm spacing; drill attachment with M 10 thread, left and right Max. drill diameter: 40 mm Drilling depth horizontal: 120 mm Vertical: 80 mm Max. clamping height: 92 mm Motor power: 2.2 kW Air consumption at 6 bar approx. 6 l per cycle Weight approx. 340 kg Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 1987, Control: Siemens 8-M X-axis travel: 10,500 mm Rsdpfx Aceyrb I Esver Y-axis travel: 5,000 mm Z-axis travel: 1,250 mm W-axis travel: 1,250 mm Spindle diameter: 225 mm Spindle taper: SK 60 with adapter for SK 50 Spindle power: 100 kW Spindle speed: up to 750 rpm Spindle speed multiplier 1:4 = 3,000 rpm Spindle torque: 18,000 Nm Ram cross-section: 460 x 550 mm Feed rate: 4 m/min Rapid traverse X/Y: 5,800 mm/min Rapid traverse Z/W: 4,800 mm/min The machine is supplied without clamping plate and without table.

Condition: used, throat 215 mm thread M2 - M10 thread depth max. 60 mm spindle MK 2 bore depth 90 mm 150 bis 450 mm 220 x 285 mm column diameter 75 mm mm Rsdpfxoyv N Dde Acver Total height 950 mm motor speeds: 700 / 1400 1/min weight of the machine ca. 95 kg

Condition: used, Year of construction: 1993, spindle diameter 100 mm x-travel 1250 mm y-travel 1100 mm z-travel 950 mm Table load 3000 kg table surface area 1000x1120 mm turning speeds 16-1250 U/min spindle taper ISO 50 Control Heidenhain Rsdpfx Aceyuttfovjr weight of the machine ca. 13,4 t No. 2022 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1977, condition: used, x-travel 520 mm y-travel 400 mm z-travel 450 mm spindle taper ISO 40 control TNC 360 dimensions of the machine ca. 2450x2300x3300 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Rjdpjyutrbjfx Acver Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Machine Benefits Technical Machine Benefits • Base nailer / pallet nailing machine: with pneumatic crossboard feeder, with template for holding deck boards, with nail feeding control system / loading unit for pallet marking / unit for turning pallets 90 degrees / pallet corner saw unit/ pallet turning unit with 180 degree turner / pallet stacking unit / pallet conveyor belt Rodpfx Acjyaiyrsvsr

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min Rodjwdta Eepfx Acvsr rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Features and technical data: - For construction drilling horizontally and vertically - For vertical row drilling with 32 mm spacing - Vertical drilling unit with freely positionable double spindle drill heads on index shaft - 1.5 kW motor with 1400 rpm - 1.5 kW motor with 2800 rpm - Drill heads with pneumatic stroke - Pneumatic material clamps Rjdpfx Ajwka Hfocver - Pass-through width approx. 850 mm - Includes various stops and drill bits Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Universal dowel drilling machine with swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drill motor 2.2 kW with 21 spindles Spindle pitch: 32 mm Redpfx Ajyvl Hzjcvjr with attached oil damper Height adjustment: 80 mm Drilling depth: 80 mm Weight: 420 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1982, spindle diameter 130 mm x-travel 2750 mm y-travel 2000 mm z-travel 2330 mm spindle taper ISO 50 turning speeds 900 U/min table surface area 1600x1900 mm Radial face slide 600 mm Control Heidenhain TNC 131 bore spindle stroke 1000 mm feed 2500 m/min Table load 8000 kg weight of the machine ca. 37,8 t Rotating table 360° The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Rjdpfx Aoyt R Htscver If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1993, spindle diameter 102 mm x-travel 1600 mm y-travel 1000 mm z-travel 1600 mm Control Heidenhain type TNC 410 table surface area 1000x1120 mm Table load 3000 kg spindle stroke 710 mm spindle turning speed range 4-1600 U/min main drive motor 13 kW Rsdpfx Ajyt R Ecjcvor weight of the machine ca. 12 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter 125 mm x-travel 2000 mm y-travel 1100 mm z-travel SK 50 mm spindle taper Philips 2500 digital readout Pfillips turning speeds 925 U/min spindle stroke 800 mm Table 1000x1400 mm Redpfx Acoyt R Anjvsr The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm Rjdpfx Aoxcgtgecver T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Rsdpfx Aoyvrrqjcvjr Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: used, Year of construction: 1986, spindle diameter 1 mm x-travel 1 mm y-travel 1 mm Redpsylzv Aefx Acver total power requirement 1 kW

Year of construction: 2005, condition: good (used), Automatic single, double or multiple strapping of e.g. bundles behind a press bindery stacker. Normally integrated into a complete line for bundles/packages. YOC: 2005 Type of strapping: single, double strapping max speed for single strap: up to 35 bundles/min max speed for parallel (double) strap: up to 17 bundles/min max bundle dimensions (w x l): ~500 x 600 mm min bundle (package) height: ~10 mm Rodpfx Aoh I Dimecvor max bundle (package) height: ~400 mm max weight bundle/package: ~25 kg Infeed / outfeed (conveying) height: ~850 mm Continuously adjustable conveyor speed Metric input of strapping position Type of sealing: heat-weld sealing Strapping material: PP No of strap coil dispenser: single Strap coil dispenser - core diameter: 200 mm Strap coil dispenser - core width: 190 mm Equipment: - back stop (package stop) - hold-down device - auto. height detection - interface to up-/downstream equipment - auto. strap feeding - auto. strap end detection - auto. strap loop ejection (on "no bundle cycle") Over all length equipment: ~760 mm Over all width equipment: ~1540 mm Over all height equipment: ~1600 mm Input Power: ~2 kVA Voltage: 400 V 3Ph, 50/60 Hz Air requirement: ~8l/cycle; 6 bar Weight: ~415 kg

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Redpfoh Iy Sksx Acvjr Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position Redpfx Aoh Iy Rujcver - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2003, condition: good (used), - Build in 2003 - Type of strapping: Einfach- & Doppelumreifung / single, double strapping - max speed for single strap: bis zu 35 Pakete/min / up to 35 bundles/min - max speed for parallel (double) strap: bis zu 17 Pakete/min / up to 35 bundles/min - min bundle (package) height: ~10 mm - max bundle (package) height: ~450 mm - max weight bundle/package: ~25 kg - Infeed / outfeed (conveying) height: ~850 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: PP - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with auto. height detection - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") Rsdpfx Ajh I Dllscver - Over all length equipment: ~760 mm - Over all width equipment: ~1540 mm - Over all height equipment: ~1600 mm - Input Power: ~2 kVA - Voltage: 400 V 3Ph, 50/60 Hz - Air requirement: ~8l/cycle 6 bar - Weight: ~415 kg - Optional Equipment: Can be combined with a RO-TRI in-line strapper to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible - Condition: cleaned & in working conditions - Machine available: upon request - Description: Automatic single, double or multiple strapping of e.g. bundles behind a press bindery stacker. Normally integrated into a complete line for bundles/packages.

Condition: used, spindle bore 63 mm spindle diameter . mm x-travel 800 mm y-travel 700 mm Rodpjyq Syijfx Acver z-travel 1300 mm w-axis 600 mm b-axis . ° spindle turning speed range 18-1800(32x) U/min table surface area 800x890 mm spindle taper ISO 40 P.D.B. total power requirement 11,4 kW weight of the machine ca. . t dimensions of the machine ca. . m Facing Head Tailstock The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM Rjdpjxz Aygsfx Acver B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: used, spindle diameter 130 mm x-travel 3500 mm y-travel 2500 mm z-axis 1250 mm W-axis (spindle longitudinal) 800 mm ISO 50 P.D.B 1800x2500 mm 12 t 3000 Hertz 400 total power requirement 37 kW ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Rsdpfsyqvqrsx Acver About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team