Used Haulick for sale (20)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Punching machine Speed: 30–400 rpm Cedpo Adzq Hofx Ap Dohd Drive power: 18 kW Ram adjustment: 0–50 mm Table dimensions: approx. 740 mm (?) Feeder Feed length: 160 mm Material width: 160 mm Material thickness: 3 mm Strip speed: 35 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: 720 NS Machine number: 1.204.027 Operating voltage: 380 V Rated current: 80 A Dimensions (L × W × H): 3,500 × 2,000 × 3,000 mm Weight: 5,000 kg EQUIPMENT Haulick + Roos feeder, type RS160SL2738

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Pressing force: 63 t Speed range: 140–800 min⁻¹ Ram stroke: 6–60 mm Ram adjustment: 80 mm Pin hole diameter: 40 mm Table Table dimensions: 800 × 580 mm Csdpfo Adzqasx Ap Dshd Table slots: 6 Feed Feed length: 160 mm Material width: 160 mm Belt speed: 80 m/min Belt cross-section: 500 mm² MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD63-800 Year of manufacture: 1982 Machine number: 282612 Dimensions (L × W × H): 3,500 × 2,400 × 3,000 mm Weight: 6,000 kg EQUIPMENT Feed

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Haulick + Roos Type: HPV28EP Machine number: 110 Machine type: Punching machine PERFORMANCE DATA Punching force: approx. 28 t Rated current: 6.7 A WORK TABLE Table dimensions: 600 × 340 mm Number of slots: 3 MACHINE DETAILS ELECTRICAL DATA Chsdo Advcqopfx Ap Dsd Operating voltage: 380 V Control voltage: 220 V DIMENSIONS AND WEIGHT Length: 1,100 mm Width: 600 mm Height: 2,000 mm Weight: 2,000 kg

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 32 t Stroke: 0–40 mm Stroke rate: 140–1,200 strokes/min Table dimensions: 550 × 500 mm MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD32-540 Year of manufacture: 1983 Machine number: 282047 Operating voltage: 380 V Control voltage: 22–24 V Rated current: 70 A Dimensions (L × W × H): 3,000 × 2,000 × 2,400 mm Weight: 4,000 kg EQUIPMENT Feed device: Haulick + Roos Codpo Adzp Nefx Ap Djhd

Condition: excellent (used), Year of construction: 2008, Haulick + Roos Year of manufacture: 2008 Cjdo Ahkq Iopfx Ap Dehd Pressing force: 2,500 kN Stroke rate: 180 strokes/min Stroke adjustment: 20-160 mm Ram adjustment: 150 mm Table surface: 1,950 x 1,000 mm Installation height: 450 mm Includes Fecker strip feeding system.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Haulick + Roos Type: RVD 63-800 HS/CNC Year of manufacture: 1980 Machine number: 1,202,097 Machine type: Punching press Press Data Press force: 630 kN Speed range: 30–800 rpm Drive power: 26 kW Stroke: 4–60 mm Stroke adjustment: 80 mm Die hole: 52 mm Table Table dimensions: approx. 800 × 600 mm Table slots: 4 Cjdps Adzicefx Ap Dohd MACHINE DETAILS Dimensions and Weight Length: 2,500 mm Width: 2,000 mm Height: 2,400 mm Weight: 6,000 kg EQUIPMENT Integrated guiding system by Haulick + Roos

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Cjds Aduyzjpfx Ap Dehd TECHNICAL DETAILS PRESS DATA Nominal pressing force: 400 kN Stroke frequency: 800 min⁻¹ Ram stroke: 5–50 mm Ram adjustment: 50 mm MATERIAL DATA Material thickness: 1.5 mm Material length: 1–50 mm Strip cross-section: 110 mm (?) Material width: 10–75 mm Strip speed: 45 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD 32-720HS Machine type: Punching machine Year of manufacture: 1994 Machine number: 1829697 Operating voltage: 400 V Frequency: 50 Hz Drive power: 19 kW Length: 3,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 4,000 kg EQUIPMENT Feeder GF50

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Cjdpfopvlf Sox Ap Dohd Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Chjdpszdf Utjfx Ap Dsd Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2003, Manufacturer: Haulick + Roos GmbH Type: RVD 3000-2500 Machine Type: High-performance stamping press Year of manufacture: 2003 Condition: used Rated pressing force: 3,000 kN Pressing force: 300 t Stroke frequency: 20–180 strokes/min Drive power: 80 kW Ram stroke: 20–160 mm Ram adjustment: 150 mm Tool installation height: max. 450 mm Maximum tool length: 2,500 mm Maximum tool width: 1,000 mm Table area: 2,450 × 1,000 mm Ram area: 2,500 × 950 mm Clamp plate opening: 2,250 × 350 mm Machine weight: approx. 46,000 kg Strip feed direction: right to left Power supply: 400 V Frequency: 50 Hz Maximum connected load: 80 kVA Maximum fuse rating: 250 A Draw cushion: not available Components of the system: Haulick + Roos high-performance stamping press RVD 3000-2500 DIMECO coil unwinder, type 23S1/D/VV Year of manufacture: 2003 Weight: 1,450 kg Maximum load capacity: 4,000 kg Cedpfx Apezrz Dxj Dohd DIMECO roller feed, type 1681/17/BVV Year of manufacture: 2003 Weight: 540 kg ARKU straightening machine Technical data for roller feed: Strip width: 5–420 mm Strip thickness: 0.1–5 mm Maximum strip cross-section: 1,000 mm² Strip speed: up to 125 m/min Feed length: 0.1–999.9 mm Feed accuracy: ±0.1 mm Roller diameter: 100 mm Strip height adjustment: 100 mm, manual mechanical Note: The ram guide should be replaced. The system is currently still in operation and functional. A quote from the manufacturer for complete disassembly and installation of new guides is available for approximately €200,000. We will gladly provide videos of the system in operation upon request.

Condition: ready for operation (used), HAULICK slitting shear for rolled sheet metal / rotary knife shear -Max. sheet thickness: approx. 2.5 mm -Cutting length: endless (unlimited) -Cutting method: 2 rotating circular knives -Knife diameter: approx. 120 – 150 mm -Table size: approx. 500 x 250 mm Cedpfsztctwjx Ap Djhd -Overhang / feed area: approx. 250 mm -Motor power: 0.75 – 1.1 kW -Drive: belt drive -Straight cuts -Strip cutting -Endless cutting of sheet metal -Steel sheet up to approx. 2.5 mm -Aluminum and non-ferrous metals, correspondingly thicker Dimensions: L x W x H 0.6 x 0.9 x 1.1 meters / Weight 180 kg Errors and omissions excepted

Condition: excellent (used), Year of construction: 1973, Description to follow! Chedpfx Aez Ebqvsp Ded

Condition: excellent (used), Year of construction: 1973, Description to follow! Cjdpfx Aozxh S Nep Dshd

Condition: used, Year of construction: 1992, pressure 250 t stroke 37 mm no. of strokes 30-240 Hub/min ram adjustment 150 mm table surface area 1200x1000 mm Csdpfx Apjuap T No Djhd hole in the table 500x180 mm tool hole in ram Ø52 mm total power requirement 50 kW weight of the machine ca. 35 t dimensions of the machine ca. LxBxH 3700x2300x3900 mm

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz Csdpfxehlnzkj Ap Dohd - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Year of construction: 1995, condition: used, pressure 125 t stroke 10-80 mm no. of strokes 240 Hub/min ram - range of adjustment 80 mm table surface area 850x600 mm ram surface 760x550 mm Cjdpslp U Nqefx Ap Dshd hole in the table 850x130 verstellbar mm table height 1100 mm tool hole in ram Ø 50 mm total power requirement kW weight of the machine ca. 13 t dimensions of the machine ca. BxTxH: 3000x2000x3300 mm

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 1204197, functionality: fully functional, pressing force: 125 t, stroke length: 120 mm, table width: 700 mm, table length: 1,100 mm, hole diameter: 52 mm, ram adjustment: 100 mm, No reserve price - guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Press force: 1,250 kN Speed range: 30 - 250 rpm Ram stroke: 8 - 120 mm Ram adjustment: 0 - 100 mm Ram bore diameter: 52 mm Table dimensions: 1,100 x 700 mm MACHINE DETAILS Controller manufacturer: UNIDOR Drive power: 35 kW Chjdpfx Aey D Nnlep Dod Dimensions & Weight Dimensions (L x W x H): 6,000 x 2,400 x 3,300 mm Machine weight: 12,000 kg EQUIPMENT Decoiler, diameter approx. 1,200 mm Workshop drawer cabinet with clamping devices External reference: 68

Year of construction: 1981, condition: used, pressure 63 t stroke 6-60 mm no. of strokes 90-550 Hub/min 300 mm table surface area 780x600 mm ram surface 807x460 mm tool hole in ram Ø 40 mm ram - range of adjustment 80 mm total power requirement 15 kW Cjdpfxolp U R Ie Ap Dehd weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2900x2000x3000 m

Condition: used, Year of construction: 1976, Force: 160 tons Windows: 600mm Daylight: 420mm Ram adjustment: 80mm Table size: 1100x1100mm Ram size: 1030x800mm Hole in table: 680x250mm Stroke adjustable: 30-100mm Csdpfx Apocna Hfj Djhd Strokes per Minute: 40-1800 Power requested: 18,5KW, weight: 20 tons, height 3950mm Siemens control, ALBA roll feeder material 400x3mm

Condition: used, Year of construction: 1992, machine/vehicle number: 120 4687, Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5 Chodpeuqc I Ajfx Ap Ded Standard configuration Roll feeder Type WAV - RDS 2E 1125Material width max. 310 mmMaterial thickness 0,3 - 3 mmMaterial cross section 630 mm2Feeding speed 80 m/minFeeding roll diameter 125 mm