Used Lathe 16 K 20 for sale (66,912)

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Bwjdpfx Ajwwlkisd Iou

Condition: excellent (used), Kuka Type: KUKA KR 16 R2010 / Control Unit KR C4 / KUKA smartPAD KUKA KR 16 R2010 – Industrial Robot Technical Data: Payload: 16 kg Reach: 2010 mm Repeatability: ±0.05 mm Axes: 6 Mounting Options: Floor, ceiling, wall, or angled mounting possible Controller: KUKA KR C4 (Standard) Typical Applications: Handling & Assembly Arc Welding Machine Operation Packaging & Palletizing Pick-and-Place Tasks Special Features: Flexibly deployable in many industrial sectors High precision and reliability Compact design with a large reach Condition: used Scope of Delivery: (See image) Bwsdpfezh U Uvox Ad Iou (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Screw diameter: 135 mm Distance between tie bars V: 1420 mm Bwsdpfx Asyh I Emod Iou Distance between tie bars H: 1870 mm Shot volume: 9662 cm3 Type: Horizontal Drive: Hydraulic

Year of construction: 1993, condition: good (used), For sale from stock location: Albert-Proeller-Straße 9a, 86675 Buchdorf Deburring Drum K20 (Year of manufacture: 1993) • Manufacturer: Bruno Kraft • Model: K20 • Machine Type: Deburring Drum / Vibratory Finishing Drum • Year of Manufacture: 1993 • Application Areas: Deburring, edge rounding, descaling, removal of scale, surface improvement of small workpieces Technical Data Drum • Drum volume: approx. 20 l • Drum diameter: approx. 400–450 mm • Drum width: approx. 250–300 mm • Drum material: steel, internally rubber-lined or PU-coated • Lid: bolted, with gasket Drive • Motor power: 0.25–0.55 kW (typical for K20 series) • Speed: approx. 30–60 rpm • Type of drive: direct or belt drive (depending on year of manufacture) Processing Parameters • Max. workpiece size: approx. 80–120 mm Bwjdpfx Adeyr I Nps Iju • Typical fill quantity: 10–15 kg of media plus workpieces • Suitable media: ceramic, plastic, porcelain, steel media • Processing operations: o Deburring o Edge rounding o Descaling o Removal of scale Dimensions and Weight • Length: approx. 700–900 mm • Width: approx. 500–600 mm • Height: approx. 700–900 mm • Weight: approx. 80–120 kg

Condition: excellent (used), functionality: fully functional, Number of Straightening rolls: 7 Bjdpfxewlg I Eo Ad Iowu plate width: 1665 mm plate thickness: 4 - 20 mm diameter of upper rolls: 4 x Ø 190 mm diameter of lower rolls: 3 x Ø 190 mm bending speed: 4 - 20 m/min weight of the machine ca: 11t dimensions of the machine ca.: 3,2 x 1,7 x 2,2 m We refurbished the machine three years ago.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand Bsdpfx Adszhtfmj Iowu with trolley drive (beam width approx. 25-33 cm) with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim See pictures

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS Bwsdeyzumzepfx Ad Ieu - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: used, Year of construction: 2004, Cast epoxy resin - dry - 3 phase distribution transformer, manufacturer TESAR Italy, year of manufacture 2004, power 1600kVA, voltage ratio 20(2x±2.5%)/0.4kV, AN-AF (forced ventilation, permanent overload 30%), Dyn11, uk=6%, IP00, standard losses, functional, complete documentation and rutine test report. Bjdpfjwpb Emox Ad Iowu

Condition: ready for operation (used), Year of construction: 1985, A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement. Bsdpfx Adszf Nb Ss Iswu

Condition: used, clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves Bwsdpfx Adeu S Tbzj Isu -Clamping sleeves: length 80 mm, 5 pieces -Sizes: Ø 15/16/20/25/30 mm -Price/Delivery: complete -Transport dimensions: 140/90/H80 mm -Weight: 1.8 kg

Condition: refurbished (used), DALEX seam welding machine, transverse seam version Outreach: 350 mm Rated power: 160 kVA Secondary short-circuit current: 38.5 kA Secondary open-circuit voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-stage switch and auxiliary control unit with thyristor power stage and synchronous welding control MPS 100 multi Bwjdjdx Suhepfx Ad Iou IMPORTANT NOTE – PLEASE PAY ATTENTION The above-mentioned performance data comes from the machine's nameplate. During inspection of the machine, it was found that a 200 kVA welding transformer had been installed by the previous owner. This changes the performance data.

Condition: used, axle configuration: 3 axles, first registration: 07/2000, color: other, Year of construction: 2000, Empty weight: 3.940 kg Axle 1: left 6 mm right 6 mm Axle 2: left 5 mm right 5 mm Axle 3: left 6 mm right 6 mm Bwedpfswycwrjx Ad Iju We have the possibility to stack trailers!

Condition: used, Year of construction: 2017, Industrial robot Manufacturer: Kuka Type: KR8 R1620 Cybertech Year of manufacture: 2017 Reach: 1,620 mm Weight: 165 kg Payload: 8 kg Kuka controller KRC4 smallsize-2 Bwsdpfx Ajxtb E Ssd Iou Controller with 400V 3-phase power Weight: 72 kg KUKA system software KSS SR 8.5.4 Kuka SmartPad KCP4 Kuka connection cable 28926

Condition: used, Year of construction: 2022, cooling capacity: 241 kW (327.67 HP), type of cooling: water, empty load weight: 2,200 kg, We are offering directly on behalf of the owner: DAIKIN EWAT240B-SLB2016 – air-cooled chiller Manufacturer: DAIKIN Type: EWAT240B-SLB2016 Year of manufacture: 09/2022 Nominal cooling capacity: 241 kW Compressor: 4 × Scroll Refrigerant: R32 Refrigerant charge: 19 kg Temperature range TS: -20 / +150 °C EQUIPMENT / OPTIONS - OPTION-04 Compressor direct start (DOL) - OPTION-10 Second setpoint - OPTION-128 Master/Slave control, max. 4 units - OPTION-57 Evaporator auxiliary heater - OPTION-60 Electronic expansion valve - OPTION-67 Ambient temperature sensor and setpoint adjustment - OPTION-68 Operating hour counter - OPTION-69 Collective fault message - OPTION-70 External alarm contact - OPTION-97 Main switch - OPTION-11 Thermal protection relay for compressor - OPTION-21 Evaporator flange connection kit - OPTION-58 Evaporator flow monitor - OPTION-61 Hot gas shut-off valve - OPTION-62 Suction gas shut-off valve - OPTION-75 Rubber vibration dampers - OPTION-78 Single pump standard ESP - OPTION-91 Safety valves in double design with changeover valve - OPTION-96 Fan protection switch Weatherproof design: Standard housing with roof Dimensions unit (L x H x W): 2,326 x 2,540 x 2,236 mm Weight: 2,206 kg ELECTRICAL DATA Bwodez Dx E Iepfx Ad Iju Power consumption: 85.2 kW Voltage: 400 V / 3~ / 50 Hz Rated current: 190 A CIRCULATION PUMP Manufacturer: Wilo Type: IP-E 80/115-2.2/2-IE4 Power input P1: 2.6 kW Speed range: 750–2,940 min⁻¹ BUFFER TANK: FlexTherm PS-K Volume: 1,000 l Including insulation Cooling chamber with coil: Design: WK-com S-W B170/B318 supply air Technical data cooling coil: Air inlet T/RH: 35.0 °C / 40 % RH Air outlet T/RH: 20.0 °C / 82 % RH Medium flow rate: 32,140 / 33,563 l/h or kg/h Capacity: 169.4 kW Control: 3-way valve + control manifold IP69 Switch cabinet for pump and control of the regulation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 11,558 h, load capacity: 1,600 kg, lifting height: 3,960 mm, free lift: 1,820 mm, fuel type: electric, mast type: duplex, construction height: 2,460 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 16x6-8, overall weight: 3,200 kg, total height: 2,460 mm, total length: 2,100 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-16 P – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.960 mm Closed height: 2.460 mm Free lift: 1.820 mm Mast: Duplex (2F396) Fork length: 1.200 mm Fork carriage: FEM 2B Drive: Elektro Battery: 48 V/625 Ah (2016) Charger: ohne/without Tyres: Superelastik 18x7-8 (40 %) / 16x6-8 (50 %) Service weight: 3.200 kg Length: 2.100 mm Width: 1.100 mm Year of manufacture: 2006 Operating hours: 11.558 h Condition: working condition EQUIPMENT 3rd valve, Front work lights, Half cabin ATTACHMENTS Sideshift Internal no.: 1308826 Location: 14974 Ludwigsfelde bei Berlin Bwsdpfx Adjz Apqne Isu Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Bwjdpoww Nccsfx Ad Ieu Food switch, material support beams, spare knifes.

Condition: ready for operation (used), CNC Lathe TAKAMAZ EX 20 / Fanuc 15 TF - Control: FANUC 15 TF - Max. turning diameter: 260 mm - Turning length: approx. 500 mm - Bar capacity: 42 mm - Spindle speeds: 40 - 4000 rpm - Spindle nose: A2-6 - Tool positions (stations): 12-fold / direct mount Bsdpfx Aeztycvjd Iowu - Tool measurement (Tooleye) - Parts catcher - Tailstock - Collet chuck: 173 E - Spindle motor: 7.5 kW Dimensions (LxWxH): 2.6 x 2 x 1.8 meters / Weight: 2,800 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine Bwodpfxjzv Saro Ad Iou - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,133 h, load capacity: 1,600 kg, lifting height: 3,150 mm, free lift: 1,430 mm, fuel type: electric, mast type: duplex, construction height: 2,040 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 18x7 - 8, rear tire type: superelastic tires (black), rear tire size: 15x5,5 - 8, overall weight: 3,073 kg, total height: 2,040 mm, total length: 2,100 mm, total width: 1,150 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-16 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.150 mm Closed height: 2.040 mm Free lift: 1.430 mm Mast: Duplex (2F315) Fork length: 1.200 mm Bwjdpjz Aqq Njfx Ad Isu Fork carriage: FEM 2A Drive: Elektro Battery: 48 v 625 Ah v. 2023 Charger: ohne/without Tyres: Superelastik SE 18x7 - 8 (80%) / 15x5,5 - 8 (60%) Service weight: 3.073 kg Length: 2.100 mm Width: 1.150 mm Year of manufacture: 2023 Operating hours: 1.133 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309243 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2014, condition: as good as new (ex-display), Zero-point clamping system Bwodpfx Adsf Dx R Uo Iju Manufacturer: AMF Type: 302828-K 20 Diameter: 110 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 10,065 h, load capacity: 1,600 kg, lifting height: 4,920 mm, free lift: 1,540 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,400 mm, tire condition: 30 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 15x4,5-8, overall weight: 3,049 kg, total height: 2,150 mm, total length: 1,950 mm, total width: 1,200 mm, fuel: electricity, STILL RX 20-16 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.920 mm Closed height: 2.150 mm Free lift: 1.540 mm Mast: Triplex (3F492) Fork length: 1.400 mm Fork carriage: FEM 2A Drive: Elektro Bwsdpoz Apqbsfx Ad Iju Battery: 48 V/625 Ah (2015) EUW Charger: 48 V/90 A Tyres: Superelastik 200/50-10 (30%) / 15x4,5-8 (0%) Service weight: 3.049 kg Length: 1.950 mm Width: 1.200 mm Year of manufacture: 2011 Operating hours: 10.065 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Overhead guard cover Internal no.: 1308943 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,217 h, load capacity: 1,600 kg, lifting height: 4,920 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, drive type: Elektro, Electric three-wheel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Normal Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Bedpjz El Daofx Ad Ijwu Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Battery year of manufacture: 2018 Side shifter, fork positioner, 3rd valve, 4th valve.

Condition: good (used), Year of construction: 2005, operating hours: 5,075 h, fuel type: diesel, Genie Z45/25J Articulating Boom Lift / Working Platform, 16m working height, 4x4, Deutz Diesel, 2005 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Bjdpfxjzqhnhe Ad Iewu Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make an appointment for a viewing and/or test drive without obligation. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 11,415 h, load capacity: 1,600 kg, lifting height: 4,610 mm, free lift: 1,440 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, battery capacity: 550 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,237 kg, total height: 2,060 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-16 / 6211 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.610 mm Closed height: 2.060 mm Free lift: 1.440 mm Mast: Triplex (3F461) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 550 Ah v. 2016 Charger: 48 v 140 A not tested Tyres: Superelastik SE 18 x 7 - 8 (70%) / 15 x 4,5 - 8 (80%) Service weight: 3.237 kg Year of manufacture: 2016 Operating hours: 11.415 h Condition: working condition EQUIPMENT 3rd valve, Overhead guard cover, Front windscreen, Load backrest, Pulse control ATTACHMENTS Load backrest, Sideshift Internal no.: 1308673 Bodpoz Apqhefx Ad Iowu Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: as good as new (ex-display), Year of construction: 2016, For sale a Kuka KR16 R2010 completely overhauled and serviced by Kuka in 03/2022 (still in original packaging) with the following configuration: KUKA robot KR 16 R2010 (SN: 452065) in KUKA orange Cable set INT 076ST2010 Sealing cover without ES Bsdpfx Asnvffked Iewu Positioning robot -FLR KRC4 SC5.1 EA3x FSoE X33 X66 X42 - current software RAL7016 anthracite gray/KUKA orange Servo Configuration SC5.1 INTERFACE 3EX-AX X7.1-X7.3 KSP 600 3x40 UL bottom left CONFIGURATION FSoE INTERFACE Fast measurement X33 INTERFACE 24V PWR IN ETH INTERFACE Ethernet 1xRJ45 X66 INTERFACE RDC X21/X21.1 INTERFACE reference switch X42 CSP 2xUSB3.0 EtherCAT® Bridge FSoE M/M MCC-40.1S KSS 8.6 KUKA.SafeOperation 3.5 KUKA.ArcTech Basic 3.5 KUKA.ArcSense 3.5 KUKA.TouchSense 3.2 KUKA.DeviceConnector pre-installed 2.1 KUKA.WorkVisual 6.0 KUKA smartPAD holder RAL7016 1x KUKA smartPAD-2 10m