Used Lathe 16 K 20 for sale (90,903)

Year of construction: 2014, condition: as good as new (ex-display), Zero point clamping system Iaedpfx Aof Dx R Ujg Uol Make AMF Type 302828-K 20 diameter 110 mm

Condition: good (used), functionality: fully functional, Year of construction: 2003, operating hours: 7,000 h, ELECTRIC FORKLIFT Ijdoxwkvnopfx Ag Usal

Condition: ready for operation (used), turning diameter over bed 500 mm turning diameter over slide rest 310 mm turning length 3000 mm turning diameter in the gap 750 mm centre height 250 mm turning speeds 20-1000 U/min Iajdpfsxl E Sajx Ag Usl no. of turning speeds 18 spindle bore 56 mm longitudinal feed 0,045-1,09 mm/U face feed 0,025-0,625 mm/U number of feeds 55 total power requirement 4 kW weight of the machine ca. 2,37 t dimensions of the machine ca. 4,9 x 1,1 x 1,3 m

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is Main spindle: max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° Subspindle: Iajdpfx Astqmnneg Usl inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° axis stroke: x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm Linear tool panel carrier for slide 1: number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm Linear tool panel carrier for slide 2: number of toolpositions 13 pos. inner processing 4 outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm feeds: rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Iodju Uic Topfx Ag Ueal Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: refurbished (used), Year of construction: 2024, operating hours: 4 h, functionality: fully functional, Equipment: documentation/manual, For sale is a fully renovated TORNOS DECO 20 type longitudinal lathe. The renovation was carried out by Tornos specialist service with factory parts and covers the following units: - painting of coverings - replacement of all ball screws - replacement of all linear guides - replacement of all cables and cable ladders in the machining area - replacement of the entire pneumatic system - replacement of the entire coolant system - replacement of all axis servomotors - renovation of all spindle motors - main and control spindle renovation - renewal of rotating guide bush and synchronous drive - refurbishment of Fanuc control and servo amplifiers - power elements, partial replacement of electrical components Description TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 220 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] (5,5kW) - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 25,4 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 1,5 [kW] (2,2 kW) - C axis indexing precision : 0.1 [°] Ijdeuq A T Sjpfx Ag Usal CROSS SLIDE 1 - Number of positions : 5 CROSS SLIDE 1 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - Live tools power: 1,5/2,2 kW BACKWORK UNIT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 Horizontal (8000 1/min 1,5/2,2kW) - Rotating guide bush (syncronised) - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader LNS ALPHA 320S OPTIONAL: Long piece ejector device (max. workpiece lenght 700mm) OIL MIST EXTRACTION – SEI EMC 1000 with stand or. ELBARON RON 100 D2TR The equipment has been almost completely renovated and is in perfect and new condition. It has a long piece ejector and a new LNS bar feeder, it can optionally be equipped with an oil mist separator and other accessories, which we can also provide. If you are interested, we will provide you with additional information and pictures. The longitudinal lathe can be viewed at our site in Hungary, even during operation, at a pre-arranged time.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 135 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 16, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without re-gripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. thread diameter: M6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. thread diameter: M3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm Main spindle C-axis indexing: 1° Rapid traverse Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive capacity Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Iajdpoxlffyjfx Ag Usl Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 × 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input modes: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Ejection and unloading device Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant system with movable jet arms Power clamping system for main and pick-off spindle

Condition: good (used), Year of construction: 2005, Max. bar diameter: 20 mm Max. headstock stroke: 205 mm Spindle speed: 500 - 10,000 rpm Max. bar diameter on sub-spindle: 20 mm Max. sub-spindle speed: 8,000 rpm Number of usable tools: 22 Turning tools with multiple tool holders: 6 Driven tools for cross machining: 3-8 Front drilling tools: 4 Iajdpfsxb Uw Dex Ag Usl Rear drilling tools: 4 Driven tool speed: 8,000 rpm Bar feeder FMB turbo 3-26

Condition: excellent (used), Year of construction: 1970, turning length 300 mm Iodpfx Aexmahlog Uoal weight of the machine ca. 0,4 t

Year of construction: 2001, condition: ready for operation (used), Various machines for laboratory use and pilot processes are available. 1) 2x Bioreactor system B. Braun Biotech Biostat 15L/Biostat C-CDU, year of construction: 2001, useful volume: 15l, control: Biostat C-CDU 1137. 2) Forced-air drying cabinet Heraeus (Kendro) UT 20, useful volume: 210l, internal dimensions X/Y/Z: approx. 610mm/510mm/680mm, max. temperature: 250°C, machine dimensions X/Y/Z: approx. 770mm/940mm/800mm. 3) Ultra cryostat Lauda K 75 with a cooling thermostat Lauda RUK 40S, bath volume: approx. 30l, min. temperature: -90°C. 4) Centrifuge CEPA 8L G, year of construction: 1985, speed: 17000rpm, drum diameter: 125mm, max. filling capacity: 10kg, power: 2.2kW. Documentation available. An on-site inspection is possible. Sale of individual units possible. Iodpsxvdfmefx Ag Ueal

Condition: good (used), STAR SV-20 CNC automatic lathe TECHNICAL DATA OF THE CONTROL AXES rapid feed X,Y: 15000 mm/min rapid feed A,B: 15000 mm/min rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C axis: 0.001°. MACHINING CAPACITY Max. turning diameter: 20 mm Max. headstock stroke: 205 mm Max. drilling capacity: stationary: 14 mm; driven: 8 mm Max. Tapping capacity: Stationary: M10 X P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: spindle drive main spindle motor: 3,7 / 5,5 kW main spindle bore: 26 mm Iasdpfsiq Dp Nox Ag Ujl PICK-UP SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Unclamping length: 75 mm spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2,2 / 3,7 kW Indexing angle: 1°, 15 CONFIGURATION Operation mode: right-handed Dimensions: 2670 x 1375 x 1650 mm Weight: 3400 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516221V00030, Year of construction: 2019, operating hours: 19,947 h, load capacity: 1,600 kg, lifting height: 6,830 mm, free lift: 2,440 mm, fork length: 1,200 mm, Equipment: CE marking, TECHNICAL DETAILS Lifting Data Lifting capacity: 1,600 kg Iaodpfxjw Dqrfs Ag Usl Lifting height: 6,830 mm Free lift: 2,440 mm Fork length: 1,200 mm Max. fork width: 800 mm Min. fork width: 0 mm MACHINE DETAILS Electrical Data Fuel type: electric Battery capacity: 625 Ah Battery voltage: 48 V Number of wheels: 3 Operating hours: 19,947 h Dimensions & Weight Transport dimensions (L x W x H): 2,000 mm x 1,150 mm x 2,860 mm Transport weight: 3,188 kg EQUIPMENT 3rd + 4th valve for fork carriage CE marking

Condition: used, functionality: fully functional, machine/vehicle number: 516211C00658, Year of construction: 2012, operating hours: 13,240 h, load capacity: 1,600 kg, lifting height: 4,300 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 1,995 mm, fork length: 1,150 mm, drive type: Elektro, Electric 3-wheel forklift truck Fahrgestellnummer: 516211C00658 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tires type: Superelastik Rear tires type: Superelastic Iaodpsu D Tqisfx Ag Uel Battery Volt: 48V Battery Ah: 625Ah Battery year of construction: 2022 Battery condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: good (used), Year of construction: 2008, Max. bar diameter: 20 mm Max. machining length: 165 mm Max. gripping length: 100 mm Spindle speed: 8,000 rpm Max. bar diameter, sub-spindle: 20 mm Max. speed, sub-spindle: 8,000 rpm Number of usable tools: 21 Iaodpfx Asxb A Dfjg Uol Turning tools with multiple insert holders: 6 Driven tools for cross machining: 3 Front drilling tools: 4 Rear drilling tools: 8 Speed of driven tools: 8,000 rpm Bar feeder FMB turbo 3-26

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Leadwell CNC lathe Model LTC - 20 AP Year : 1995 Working lenght : 550 mm. Max. working diameter : 300 mm. Spindle borer : 62 / 52 mm. Number of tools : 12 pcs. X-axis travel : 175 mm. Z-axis travel : 600 mm. Control : Fabuc O-T 3-jaw chuck Tailstock Tool-Setter Tool posts Interface RS-232 C Tool locker Iajdpsxqcqqefx Ag Uel Chip conveyer Coolant

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is our Reis welding robot in good condition. The welding robot is being offered complete with enclosure and is available immediately. (Technical data can be found in the photos) Type: Reis RV 20-16 Iaodewra S Djpfx Ag Usl Control and operator unit PHG 10-2 The system is located at our facility in Hungary / 2699 Szügy and will be sold from site. (Disassembly possible after consultation with buyer) We would be happy to welcome you for an inspection and demonstration of the system (by appointment). The system is sold with an unperforated welding table only!!!! (see last photo) The perforated version is not included in the sale.

Condition: used, Year of construction: 2015, Technical details: turning diameter: 20 mm Article: CNC automatic lathe Manufacturer: Tornos Type: Sigma 20/6 Iaodjtwgltjpfx Ag Ujl Year of construction: 2015 CNC axes: 6 Very good technical condition - used in current production With barloader It has 6 numerically controlled axes, rotating tools that work together with both the main spindle and the counter spindle. Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), functionality: fully functional, machine/vehicle number: 516221X00138, Year of construction: 2020, operating hours: 4,797 h, load capacity: 1,600 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, TECHNICAL DETAILS Fuel type: Electric Unladen weight: 2,307 kg Dimensions (L x W x H): 2,050 x 1,150 x 2,050 mm Lifting capacity: 1,600 kg Lift height: 4,700 mm Free lift: 1,500 mm Fork dimensions: 800 x 850 mm MACHINE DETAILS Number of wheels: 3 Attachment: Sideshift Options: Work lights, Full free lift, Non-marking tires Mast: Triplex Inspection valid until: 03/2026 Iaodpfxowtdahs Ag Ujl Make/Model: Still RX20-16 Battery year: 2020 Capacity: 625 Ah Battery voltage: 48 V Year of manufacture: 2020 Serial number: 516221X00138 Operating hours: 4,797 EQUIPMENT - Documentation available: No - CE marking available: Yes

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 97485, turning height: 1,600 mm, workpiece weight (max.): 7,000 kg, turning diameter over cross slide: 1,700 mm, turning diameter: 1,600 mm, feed length X-axis: 2,000 mm, feed length Z-axis: 1,250 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, total height: 6,765 mm, total width: 8,300 mm, total length: 9,000 mm, rotary table diameter: 1,300 mm, rapid traverse X-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, torque: 26,300 Nm, spindle speed (min.): 2 rpm, spindle speed (max.): 380 rpm, table load: 7,000 kg, table diameter: 1,300 mm, overall weight: 40,000 kg, cone diameter: 50 mm, milling spindle motor power: 40,000 W, milling spindle speed (max.): 3,000 rpm, Pietro Charnaghi AC 16 TM Siemens Sinumerik 840C Iaodpfowmbbvsx Ag Ujl For tecnichal detals look at pictures

Condition: excellent (used), Year of construction: 2010, 7 axes Control FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Max. bar diameter 16 mm (sub spindle) Max. spindle stock travel 205 mm Max. spindle speed 10,000 rpm Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) Iaedjwnd Dpopfx Ag Uel 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear machining

Condition: used, turning diameter over bed 410 mm turning diameter over slide rest 260 mm turning length 1000 mm Ijdpewz Ruzefx Ag Ujal turning speeds 40 - 2000 U/min centre height 205 mm spindle bore 50 mm total power requirement 4,5 KW weight of the machine ca. 1,6 t dimensions of the machine ca. 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 Isdpjww Nccsfx Ag Usal table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 2015, Technical details: Iaedpjtwgk Nofx Ag Uel turning diameter: 16 mm Article: CNC automatic lathe Manufacturer: Tornos Type: EvoDeco 16/10 Year of construction: 2015 CNC axes: 10 Very good technical condition - used in current production With barloader The machine has a very extensive equipment - 4 rotating tools, which offer very large machining possibilities. Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2018, Switch-on hours 7,032 h Machining time 3,840 h Machine ran with oil Max. spindle stroke 205 mm Max. speed 10,000 1/ min 6-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) Iaodpfxewpkwre Ag Uol 4 driven tools for cross machining on linear slides 4 tools incl. drill holders for rear machining with drive Speed of driven tools 8,000 1/min Speed counter spindle 9,000 1/min 7 axes incl. HMT (chip breaking software) Bar feeder FMB minimag 20/3200

Condition: good (used), Multi-spindle lathe (6 spindles) max. bar diameter 16 mm guide tubes 4,000 mm Isdpfxop Dux Ts Ag Uoal chip conveyor