Used Laser Welding Systems for sale (38,641)

Condition: new, table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 481 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Hfjdpfx Afofk Aimjcef For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 2980 x 1480 x 650 bis 1050mmtable width: 1480table length: 2980weight approx.: 945This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Hfedpfxefk Aino Afcjf

Condition: new, table height: 800messurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 630This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Hodpsfk Aipjfx Afcsff For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950 mmtable length: 1950weight approx.: 358This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Hfsdpfxofk Ai Ae Afcof For more information please follow this link:

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 375 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Hjdofk Ai Eopfx Afcsff For more information, follow the link:

Condition: new, table height: 800messurements (LxWxH): 1450 x 950 x 800table width: 950table length: 1450weight approx.: 315 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Hjdpfxefk Ai Hs Afceff For more information, follow the link:

Condition: new, table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 630 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Hfsdpfx Afjfk Ailjcsf For more information, follow the link:

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 285 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Hfodpfx Afefk Aiwecjf For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 425This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Hfjdpfxofk Aixj Afcsf For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1980 x 1480 x 650 bis 1050table width: 1480table length: 1980weight approx.: 491This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Hfsdpjfk E Dzofx Afcjf For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 428This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Hfodpfsgrvwijx Afcof For more information please follow this link:

Condition: new, table height: 800 mmmessurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 332 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Hfodjgrz Tpspfx Afcjf For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1480 x 1480 x 650 bis 1050table width: 1480table length: 1480weight approx.: 464This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Hedpfsgrz Tlox Afceff For more information please follow this link:

Condition: new, table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 530 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Hjdpfx Afsfk Aiqocsff For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 490This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Hfsdpjfk E D Defx Afcsf For more information please follow this link:

Condition: new, table height: 800messurements (LxWxH): 1400 x 900 x 800table width: 900table length: 1400weight approx.: 235 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Hfodpjfk Aitjfx Afcof For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 475This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Hfodefk E D Ajpfx Afcsf For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 308This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Hfodpegrvv Tsfx Afcef For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1400 x 900 x 650 bis 1050table width: 900table length: 1400weight approx.: 305This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Hodpfxsgrvwbe Afcsff

Condition: new, table height: 800messurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 602This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Hfsdpfx Afjgrz Ttscsf For more information please follow this link:

Condition: new, table height: 800messurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 469 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Hedpfx Afogrz Twoceff

Condition: excellent (used), Year of construction: 2008, A used TruLaser 3530 laser cutting system is for sale. Technical data: - Operating hours: beam on 2955 h/laser on 15464 h - X-travel 3000 mm (max. 3104) - Y-travel 1500 mm (max. 1580) - Xp-travel 300 mm (max. 305 mm) - Z-travel 114 mm - max. material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes Hsdpfeixl Tnjx Afcjff - max. positioning speed parallel to the axis 120 m/min - simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y-axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y-axis 15 m/sec. Standard equipment - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic XP axis - Automatic pallet changer - Closed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focus position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensors - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spray device - Position laser diode - Programmable cutting gas pressure - Automatic switch-off - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lens and quick-change device - ControlLine, capacitive height control and process control - Sinumerik 840D control: Open control - Causes of error messages via diagnostic functions Extended machine equipment - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price €55,000 net Machine has been dismantled. Can be viewed by prior arrangement. If you are interested, please contact us

Condition: used, Automatic Welding System Brand: Motoman / Robotec Model: W45/635/2.2/F1CS - A45 G59 Single-station welding system composed of: * 2 six-axis anthropomorphic robots Hfedpfsx Dbirox Afcef * 1 two-column positioner Wire welding (MIG/MAG)

Year of construction: 2007, condition: used, The MOTOMAN welding line is in good condition and has only worked about 100 working hours. Such a set is mostly used in the production of agricultural machinery – trailers, frames, axles. Made to order or assembled from standard products (except portal). The automatic welding station consists of: Station – HD Gantry HP6/EA1400N Positioner – HSB -10000SX Control unit – NX 100 Welding: Arc welding. MIG/MAG welding. Hedpom Uc Igofx Afcjff Possibility of pulse cooking. The thickness of the wire used is 1 – 1.2 mm. The minimum seam height is 3mm. Maximum wire feed speed 25 m/min. Welding handle cooling function. Laser tracking: Seam search using laser sensors. It is used when changing the position of the seam. Possible deviation from the position of 5 mm. Increase in welding time by 30% and more (depending on the product). Seam fixation at min. 3mm for drop. Positioning: Positioner – HSB-10000SX The carrying capacity of the positioner is 10,000 kg The positioning accuracy of the robot arm is 0.0001 mm Dimensions of welded parts: Height/width – up to 3000 mm (including mounting hardware). Length – up to 6500 mm (including mounting equipment). Maximum weight – up to 3500 kg (limited by lifting equipment). Specifics of the parts that can be welded: Batches of high precision coupling parts. Long weld length. Large metal thicknesses min. 5 mm. Rigid product construction. When a consistent high-quality weld is required. High bending tolerance of parts. High tolerance of overall dimensions of parts. Welding inside the part – depth 110 mm. If you have more questions, we will be happy to answer them.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Hedpfx Aorfucfjfcjff Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.