Used Large Format Printer for sale (11,154)

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: UMF00631, Speed: prints Up to 70 p / m. Counter: Print Total: 1‘618‘150 Bedpsxzg Diefx Aa Usld Equipment / Additional information: - Envelope printing - Stapling - 2 or 4 hole punching - Folding - Three-knife trimmer - Scanning Printing method: color laser printing Print resolution: 2,400 x 2,400 dpi Max. Paper capacity: 7,650 sheets (A4 / A3) Max. Output capacity: 11,200 sheets (A4, 80 g / m²) Possible formats: Paper cassettes 1, 2 and 3: Standard formats: A4, A4R, A5R, A3, SRA3, maximum 330 x 483 mm Multi-purpose tray: Standard formats: A4, A4R, A5R, A3, SRA3, maximum 330 x 483 mm Envelopes: No.10 (COM10), Monarch, ISO-C5, DL Possible grammages: Standard cassettes: 52 to 220 g / m² Multi Purpose Tray / Optional Paper Trays: 52 to 300 g / m² Double-sided printing: 52 to 300 g / m² 2 complete sets of toners THE FOLLOWING NEW & ORIGINAL CANON TONER CARTRIDGES ARE AVAILABLE FOR PURCHASE: 2x Canon imagePRESS Toner T01 Yellow 2x Canon imagePRESS Toner T01 Magenta 2x Canon imagePRESS Toner T01 Cyan 2x Canon imagePRESS Toner T01 Black Very good condition / Totally revised 3 months ago (approx. 9000 CHF)

Condition: excellent (used), machine/vehicle number: 9056423, WITH COLOR RIBBONS Config. No.: 096-104-00404 Equipment / Additional information: Maximum Print Area: Width: 3.4”/86mm Length (with standard memory): 39”/991mm Resolution: 300dpi/12dots/mm Maximum Print Speed: 8”/203mm per second Blsdpfx Aajvf Ifas Usd Label and liner width: 0.79”/20mm– 3.54”/90mm Ribbon width: 0.79”/20mm– 3.4”/87mm

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: V9042700001, Power: Colour / Mono: 65ppm, A4 Counter: Color total: 1,262,651 // BW total: 753,781 Format (cm): max. 45 x 32 SRA3 Gramatur (gr / m2) : up to 300 Resolution: 1200 x 4800 dpi Colour : 4 colours Equipment / Additional information: Blodpfeu Egzqjx Aa Uod The machine can make brochures, staple and fold.

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 43000129, Counter: 61 Mil. Clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Blsdpfx Aaephpups Ued Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight* Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm with Donaldson Ultrafilter Very good condition / tested, checked, cleaned, dismantled & secured by a specialist.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: G366J310535, Counter: Color Total 2’878’974 / B & W Total: 2’961’001 Format/Sizes: Maximum size: 330 x 660 mm Maximum standard sheet: 330 x 488 mm Minimum size: 98 x 146 mm Equipment / Additional information: With Fiery Bljdpfx Aaexuhw Ro Uod PRODUCTIVITY/PRINT SPEED • Average Monthly Print Volume: Up to 80,000 • Duty Cycle: 750,000 • 80 ppm (8.5 x 11"/A4), 52–350 gsm with Performance Package • 80 ppm (8.5 x 11"/A4), 52–220 gsm • 60 ppm (8.5 x 11"/A4), 221–350 gsm • 44 ppm (11 x 17"/A3), 52–350 gsm with Performance Package • 44 ppm (11 x 17"/A3), 52–220 gsm • 32 ppm (11 x 17"/A3), 221–350 gsm IMAGE QUALITY • 2400 x 2400 dpi VCSEL ROS for sharpness, detailed shadows and bright highlights • 1200 x 1200 x 10 RIP rendering without down sampling for Ultra HD performance

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: TA-2004/251, (Printing, copying, scanning) with brochure finisher Power : Color: up to 50 pages / min. in A4 Black: up to 65 pages / min. in A4 Paper Size: Trays 1-2: Size: Custom to A3 Tray 3: Format: A4; Tray 4: Format: A4 Bypass Tray (Tray 5): Size: Custom up to SRA3 and 13 x 19 inches Paper Weight: Trays 1-2: Paper Weight: 64 to 220 g / m2; Bypass Tray (Tray 5): Paper weight: up to 300 g / m2 Duplex: Yes (1-1, 1-2, 2-2, 2-1) Document feeder: Duplex document feeder for 250 sheets Print volume: Max. 200,000 pages per month Equipment / Additional information: With RIP Copying Copy resolution: 2400 x 2400 dpi Reduce / Enlarge: 25% - 400% Printing Technology: laser printer Print resolution: 2400 x 2400 dpi Bedpfx Aaexb U S Io Ujld 2-sided: standard Scanning Scan resolution: 200 x 200 dpi, 300 x 300 dpi, 400 x 400 dpi, 600 x 600 dpi Electrical connection: 230 V, 50/60 Hz

Condition: excellent (used), Offer for UTECO ONYX GO flexo press, year 2024, 1300 mm width, like new, very little use Bjdsymwkrspfx Aa Ueld

Condition: excellent (used), Eos Type: EOS M270 Metal laser sintering system Bjdpfju Ebpcex Aa Ujld Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (incl. build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner System was upgraded to Scanlab hurrySCAN 30 for a more precise print image Focus diameter 100 μm Dimensions (W x D x H) System: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler and software Condition: used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Bedpfsft R Swsx Aa Usld Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: new, Year of construction: 2025, Powder coating system for large parts All dimensions and other changes can be taken into account in the design and planning The offer includes the following components: Cabin for chemical pretreatment (3 zones) with spray ring Walk-in coating cabin Powder gun Powder firing oven Manual conveyor system Electrical control Example: (all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Bodpfsbhh Awex Aa Ueld Walk-in cleaning cabin including automatic spray ring 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm height 4,200 mm Walk-in coating booth, manual coating 1 Dimensions of booth length 9,000 mm width 4,500 mm height 3,400 mm 2 Dimensions of booth including extraction length 10,125 mm width 4,500 mm height 3,400 mm powder firing oven 1 Internal dimensions length 6,500 mm 2 Internal dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 External dimensions including thermoblock length 7,600 mm 5 External dimensions including thermoblock width 2,800 mm 6 External dimensions including thermoblock height 3,100 mm Manual conveyor system The conveyor system consists of made of: 1. Support structure, consisting of steel elements, 120x120m/ IPE 160 2. Rollers - No. 9862 GL 4 pieces 3. Pneumatic accessories for locking - unlocking during transfer 4. Rail system - No. 9060 - 234 meters 5. Rollers - No. 9862 GLHT 24 pieces 6. Connecting pieces - No. 9061M 34 pieces 7. Fastening clamps - No. 9067/180 234 pieces 8. Stoppers - No. 9169 21 pieces 9. Movable locking - No. 9601 VM 6 pieces 10. Rigid locking - No. 9601 VF 17 pieces Electrical control The electrical control unit is divided into electrical and automatic control. With it we can control all the units mentioned above and consists of: - PLC - Touch screen 5" color -easy view- - Modem - Thermo-magnetic switch. Fuse (Telemechanique, Siemens, ABB). - Cables, supports, pipes, etc.

Condition: excellent (used), Large flanging device Make Trumpf Bljdpfou Nuycsx Aa Uod Type CS 20 CN 20 (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used

Condition: like new (used), Year of construction: 2021, operating hours: 500 h, 1050 including holder for 2 heads Bljdpfxsrz N Imo Aa Usd The Thermo-Inkjet 1050 was designed as a low-maintenance, easy-to-use industrial printer and produces high-resolution text, logos and graphics as well as 100% error-free readable barcodes.

Condition: used, 3DGENCE Type: Industry F420 Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Bledpfx Aaownpbgj Uod Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) We would be happy to answer further questions by phone. Written orders possible by email or fax

Year of construction: 1995, condition: good (used), Load capacity: 15000kg, Support: 600 mm, Blodjtza Inspfx Aa Uod Large dimensions: 6000 x 3210 mm, Length: 5830mm, Width: 1200 mm, height: 3200 mm.

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Height: 1900mm Weight: about 100kg Bsdjhzgtuopfx Aa Ujld

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Bljdpfx Aaewd Ulve Uod

Condition: excellent (used), Year of construction: 2007, For sale is a Dimension BST 3D printing center with serial number P1588. The center was used as a test center Interior component Table 203x203x305 mm Nozzle head computer controlled Material cassette automatically reloadable Technical data Dimension dimensions 686x1041x914 (WxHxD) Weight 136 kg Max construction volume 203x203x305 Electrical connection 230V, 60hz, 15A Accessories: - power cord - 20 material cassettes - instruction manual - Basic training manual - Div Software - 29 Table tops Prices plus VAT Bjdpfx Aaeh Uc Iqo Uold Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible!

Condition: excellent (used), Year of construction: 2016, Inca Onset X2, 3/4 automized Color configuration: 8 channel printer with four colours (CMYK) 1/12th of the new price !!!!! Printhead status allowing to print at maximum speed with outstanding quality, up to 140 beds per hour/700m² per hour, needs replacement of 60 heads (circa 45.000€) The machine is in excellent shape, serviced by manufacturer since day number one. Annual maintenance done in May 2025. Bsdpeun Swbefx Aa Ueld Available: January 2026 As the business expands, Onset X2 provides the capacity to extend the range of jobs companies can handle. The addition of a second set of CMYK delivers even higher productivity - up to 707m²/hr* (equivalent to 138 full-bed sheets/hr) - while an optional six channels can be populated with light cyan (Lc), light magenta (Lm), white (W) and orange (O) to add versatility and superb quality. A choice of uni-directional, bi-directional and super high-quality print modes can be selected depending on the specific job requirements. * Based on an approximate 6 second material handling time. Decomissioning, transport, installation, training and warranty are included (in Europe) For further technical details please refer to enclosed data sheet.

Condition: excellent (used), Trumpf Type: TruPrint 3000 G02 The machine is in very good condition and has been professionally tested for functionality by a TRUMPF technician at our facility. We provide a 6-week warranty on the machine. Year of manufacture: 11/2017 Beam-on hours: 17,731 Laser Metal Fusion Machine (Metal 3D Printer) Flexible solution for industrial additive manufacturing. The TruPrint 3000 is a universal mid-format machine (LMF / PBF / LPBF) with industrial-grade part and powder management. From now on, you benefit from even greater flexibility, quality, and productivity for your additive serial production: Productivity is nearly doubled, independent of part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multi-laser system during the build job ensures optimal quality for printed multi-laser parts. The latest advancements in shielding gas guidance further improve part quality and reproducibility. This is documented in parallel with the build job via Melt Pool Monitoring, allowing compliance with requirements such as those in the medical sector. Highly flexible, the TruPrint 3000 can be adapted to your specific requirements. With a build volume of 300 mm diameter and 400 mm height, it can be used across a wide variety of industries. Depending on the size and complexity of the parts, your workflow preferences, and production volumes, you can flexibly choose between internal or external unpacking—all under inert gas. External unpacking further minimizes the 3D printer’s downtime via simultaneous main-time operations. Technical specifications: TruPrint 3000 Build volume (cylinder): 300 mm diameter x 400 mm height Processable materials: Weldable metals in powder form, such as stainless steels, tool steels, aluminum, nickel-base, cobalt-chrome, copper, titanium or precious metal alloys. Current materials and parameter availability on request. Preheating (standard): up to 200°C Maximum laser power at the workpiece (TRUMPF fiber laser): 500 W Laser spot diameter: 100 - 500 μm Bjdpfx Asvvl I Tja Ujld Layer thickness (adjustable): 20 - 150 μm Scan speed (powder bed): 3 m/s Build rate: 5 - 60 cm³/h Connections and consumption: Electrical connection (voltage): 400/460 V Electrical connection (current): 32 A Electrical connection (frequency): 50/60 Hz Shielding gas: Nitrogen, Argon Design: Dimensions (incl. filter) (W x H x D): 3385 mm x 1435 mm x 2225 mm Weight (incl. powder): 4300 kg The system has been dismantled by the manufacturer, with disassembly records and function logs available. All axes are professionally secured. The system has been used with materials 1.44.04 and most recently with AlSi10Mg. Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data and listed specifications reserved!) We will be happy to answer additional questions by phone.

Condition: good (used), Large-scale system for climate tests with S!MCON control Design The system consists of the following main components: - Walk-in, insulated test room - Air treatment room - Machine unit - Air conditioning system - Control cabinet Test room The fixtures in the test room are made of corrosion-resistant material. The test room can be illuminated, is walk-in, and has a condensate and cleaning drain. Air treatment room The air treatment room is located behind the air baffle in the insulated interior. Bedpfow U Sv Eox Aa Usld It contains the following components necessary for temperature control and is accessible via easily removable panels. - Test room fans - Heat exchangers - Electric heaters - Ventilation and exhaust system - Temperature sensors In the air treatment room, the air is tempered (cooled/heated), humidified and dehumidified, and circulated by fans. The air is drawn in under the ceiling and expelled at floor level. Sensors The temperature and humidity sensors are located behind the air baffle in the air treatment room. Machine Unit The machine unit, consisting of refrigeration units, supplies the air treatment room with the required energy. Climate System The climate system consists of: - Steam humidifier - Dehumidification evaporator Technical Data Test chamber volume: approx. 32 m³ Direct temperature range: -40 to +100°C Temperature fluctuation over time in the center of the usable space: +/- 0.5 to +/- 1 Temperature change rate Heating: from -35°C to +50°C at 3 K/min Cooling: from +85°C to +85°C at 2 K/min from +80°C to -40°C at 1 K/min Data for climate testing Temperature range: 10 to 95°C Humidity range: 10 to 95% RH Dew point range: 5 to 93°C Temperature fluctuation: +/- 5°C Humidity fluctuation: +/- 3 to +/- 5% RH Cooling water specifications Connections Inlet: 2 x 1 1/2" RH Return: 2 x 1 1/2" RH Consumption at full load: max. 16 m³/h Maximum load on the test chamber floor: 10,000 N/m² Nominal voltage: 3/N / PE AC 400 V 50 Hz Nominal power: 97 kW Nominal current: 148 A Dimensions: Test chamber: Width 3.60 m, Height 2.20 m, Depth 5 m Climate chamber divided for transport at a specified location (approx. 2.50 m). Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52181, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup. Bodpfx Aajwna R Ss Uold

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52178, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Bsdowna N Uspfx Aa Usld Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52177, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Bsdpfx Aewna Nnsa Ujld Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, 3D Systems Projet 3500HDMax 3D Printer - bought in 2013, good condition, functional. Blsdownbd Hspfx Aa Ued

Condition: used, functionality: limited functionality, Year of construction: 2013, Projet 3500HD Max 3D printer, in need of maintenance. Blodpswnbcisfx Aa Usd