Used Lapping for sale (126)

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Toolbox: Transport box, heavy-duty design Prjdox Hghnspfx Adzsa -Width: 890 mm -Depth: 550 mm -Height: 495 mm -Lid: lockable, without lap -Weight: 67 kg

Condition: good (used), Year of construction: 2002, functionality: not functional, machine/vehicle number: 629013, Opening 4-4, products with or without an over fold, additional parts for processing thin printed sheets, max. signature length 510mm, max. speed 12,000/hour, mechanical speed 18-200 cycles per minute, max. book sizes, min. signature length 120 mm (4-3/4"), max. signature length 510 mm (20-1/8"), min. signature width 80 mm (3-1/8"), max. signature width 320 mm (12-5/8"), max. signature thickness 4 mm (5/32"), lap for sword opening min. 8 mm (5/16"), high folio or low folio, number of stitches standard 13, staggered 7, stitch length 16.5 mm (2/3"). Prsdpoza Uy Dsfx Adzea

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 1298852, Opening 4-4, Products With or Without Overlap, Optical Scanning System, Additional Parts for Processing Thin Print, Max. Signature Length 510mm, Max. Speed 12,000/Hour, Mech. Speed 18-200 cycles per minute, max. Book Sizes, min. signature length 120 mm (4-3/4˝), max. signature length 510 mm (20-1/8˝), min. signature width 80 mm (3-1/8˝), max. signature width 320 mm (12-5/8˝), max. signature thickness 4 mm (5/32˝), Lap for sword opening min. 8 mm (5/16˝), high folio or low folio, Number of stitches standard 13, staggered 7, Stitch length 16.5 mm (2/3˝). Pjdjza Uxtspfx Adzjra

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 117 h, load capacity: 25,000 kg, lifting height: 3,500 mm, free lift: 1,750 mm, fuel type: diesel, mast type: duplex, construction height: 3,670 mm, power: 185 kW (251.53 HP), fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Load centre: 1200 mm Fork width: 250 mm Fork thickness: 110 mm Mast type: Duplex Predpfozt T Dgjx Adzea Transmission: Dana TE14000 Condition: New equipment Technical condition: New Front tyre type: Pneumatic Front tyre size: 14.00 x 24 Rear tyre type: Pneumatic Rear tyre size: 14.00 x 24 Side shifter, fork positioner, 3rd valve, 4th valve, Kalmar comfort cabin: EGO air conditioning ECC with fresh air filter, tinted windows and laminated safety glass windscreen, door holder for open door (left side), sunblind for roof window, air-suspended and reinforced leather Grammer Actimo XL driver's seat with seat heating, lap belt and horizontal suspension, Radio with DAB+/CD/RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming, 12/24V power inverter incl. 2 x 12V and 2 x 24V sockets, load weight indicator in display, direction selector switch integrated in lift hydraulic lever, 2 additional external mirrors mounted on B-pillars, LED rotating beacon, height adjustable, KALMAR SV/GV carriage with centre level compensation, width B = 3,000 mm, Kalmar forks, fork length l = 2,400 mm, fork cross-section b x a = 250 x 110 mm, Terminal-West quick-change system for SV/GV fork carriage, forks tapered 500 mm from fork shank to 15 mm at the tip, elevated air intake for air filter incl. pre-separator, engine heater 220V, accumulator for lift hydraulics, separate tanks for brake and working hydraulics incl. hydraulic oil cooler, mudguards on drive axle, mudguards on steering axle, anti-slip coating on front wheel covers and tank, 2 extra LED headlights in mast below standard headlights, 2 extra LED headlights on front cab corners oriented in driving direction, 6 extra LED headlights on rear cab corners with guard, 2 extra LED headlights on wheel covers, electronic inching - enables precise low-speed driving with simultaneous full lift speed, acoustic reverse warning signal - multi-frequency bass tone (only audible in the immediate vicinity of the machine), automatic central lubrication system on steering axle and fork carriage, 6 kg (powder) fire extinguisher EN3, reversing camera mounted on cab roof with monitor (colour) in cab, mast camera linked to the in-cab monitor (in combination with reverse camera), Monitor HD 7 QUAD-view, tyre pressure monitoring integrated in display.

Condition: reconditioned (used), Number of milling spindles 2 St. fence ja ja /nein workpiece ja STEGHERR Cross-bar Milling Machine, Type KSF-mini ----- Specialized milling machine for the efficient production of intersecting muntin bar joints. The KSF-mini muntin bar milling machine embodies STEGHERR's extensive experience in manufacturing specialized milling equipment for intersecting muntin joints. The KSF-mini enables the rapid and precise production of all standard intersecting muntin joints encountered in practice. Muntin bars that have already been profiled can also be processed on the KSF-mini. Precise milling is achieved because the workpiece is machined on three sides in a single clamping operation. The tools are driven by two three-phase motors; workpiece clamping is pneumatic. Pjdpfozip Nwjx Adzora The profile cutter is designed to match the web width. The saw blades that perform the lap-joint cut can be adjusted to the profile cutter's dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. - Motor: 2.2 kW, 380 V, 50 Hz - Pneumatic pressure: 6 bar Includes: ----- - Machine stand - Foot pedal control - NEW ORIGINAL stop rail with scale and sliding stop featuring an optical setting aid, as shown in the photos. Tools as shown in the photos: 1 Profile cutter 3 Saw blades (corresponding to a web width of 10 mm) Footprint approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg ----- (All technical specifications provided by the manufacturer; no liability assumed!)

Condition: used, mileage: 43,700 km, power: 62 kW (84.30 HP), first registration: 03/2021, fuel type: diesel, color: orange, tire size: 225/70 R15, driver cabin: other, gearing type: other, emission class: euro6, suspension: other, Year of construction: 2021, number of seats: 2, Equipment: additional headlights, air conditioning, onboard computer, power assisted steering, Additional features: * 2-point seat belt (lap belt) for passenger * 3-point safety belt for driver - mounted on the cabin rear wall * 3-point belt for passenger seat * 4-wheel steering (4WS) switchable * 500-hour service interval (instead of the standard 300 hours) with special ASH Long Life oil * Automatic lubrication system * Heated exterior mirrors * Rubber-coated container rear wall for minimizing wear * Mixed brush strips (steel / poly-plastic) * C-shaped brush arm for weed brush system * Germany version: LED flashing lights on the side of the container (left and right) - only in combination with the front and rear flashing lights - removal of the rotating beacon - not in combination with a folding rotating beacon * Rotatable rollers on the suction shaft - instead of skids * Spare wheel, complete - M+S winter tires 225/70 R15 * Noise reduction package for cabin and suction blower * Coarse dirt flap rubber in the suction shaft made of 17mm material instead of 10mm * Camera for suction nozzle monitoring * Comfort driver's seat, König type, air-suspended with integrated 3-point belt, seat heating * Compact sweeper Swingo 200+ base - pushed 2-brush system * Headrests for passenger seat * LED work lights on the cabin roof (instead of standard work lights) * LED tail lights (instead of standard lighting) * M+S winter tires 225/70 R15 instead of standard tires * Mechanical suspension for front and rear axles * Engine: VM R754EU6 - Euro 6c - 4-cylinder - 62 kW (84 hp) * Professional disc brush control for 2-brush system (independent control) * Radio, CD, MP3, USB port and hands-free system via Bluetooth * Rear view monitoring with monitor and camera * Standard paint RAL 2011 orange * Swingo transport speed 50 km/h * Wheel chock with bracket * Preparation for subsequent installation of the hand suction hose * Weed brush system for 2-brush system (without weed brush) * Two LED flashing lights at the rear Prsdpfx Aszcf Abjdzja * Two LED flashing lights at the front Other: * Trade-in and purchase of vehicles and machinery possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer subject to change. * Photos may differ. Price applies to the existing condition. * All information without guarantee.

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Motor power 50Hz 3~ 400V 5.5kW Sliding table 2800 mm without scoring saw Digital angle adjustment display Digital speed display Hydraulic lifting / lowering / tilting Podpfx Adjy Icbgozsra Cutting width 1005 mm Manual parallel fence LAP laser system Mitre fence (small) Saw blade diameter 250 - 450 mm

Condition: used, This listing is for the Mitutoyo BM1-8-1B/PD Gauge block set The unit is in full working condition and is ready for immediate release Predpfx Ajxv A Rzedzea This Mitutoyo 81-piece rectangular steel gauge block set is crafted from high-chromium alloy steel and features an ultra-micro-lapped surface finish for precision and durability. Carefully heat treated and stress-relieved, these blocks provide exceptional wear resistance, stability, and wringing performance, ideal for high-precision calibration, inspection, and tooling environments. Mitutoyo gauge blocks meet or exceed all internationally recognized standards (ASME, ISO, JIS), with flatness, parallelism, and surface finish that often surpass government specifications

Condition: good (used), Year of construction: 2008, functionality: fully functional, working width: 560 mm, type of input current: AC, infeed height: 340 mm, empty load weight: 3,200 kg, infeed width: 560 mm, Equipment: documentation/manual, Smyth 150 4D Large Thread Sewing Machine, 2008 The machine is still connected to the power supply and has very few operating hours, as it was only used for half shifts! Prodpfx Adjzpfiyszja Format ranges & performance: Maximum sheet format: 560 x 340 mm Minimum sheet format: 135 x 80 mm Maximum mechanical speed: 150 cycles/minute Number of stitches: 13 stitches Stitch length: 24 mm Feeder & opening system: Feeder type: Automatic sheet feeder (4D-Stream Feeder) Opening devices: 4 upper suction devices + 4 lower suction devices (4+4 openings) Overlap opener: Integrated LAP opening system (suction opening for signatures with overlap) Equipment & control: Operation: Computer-controlled setup via a swiveling color touchscreen display Total machine weight: approx. 3,200 kg Video available upon request!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, •Revolver head overhauled in 2021 •High-pressure/high-flow KSS pump installed in 2021 •Draw tube renewed and spindle housing re-bearinged and lapped in 2022 •Prepared for automatic loading of parts using a robotic cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Turning diameter max. 550 mm Turning diameter max. 480 mm Turning length 1000 mm Spindle bore 78 mm Drive power (50%) 53 kW Speed range (1-stage) 30 – 4000 rpm Drum turret Number of positions 12, of which 6 are driven Cylinder shank 40 mm Speed range (2-stage) 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock controlled via program including various centering tips  Drum turret, 12 positions  Drive unit for turret  Chip conveyor  Coolant system with increased pump capacity, approx. 4 bar  Interface for automation  Various accessories  1 Heimbuch collet chuck SK 80, without collets  1 3-jaw chuck Schunk Rota NCF 315  1 3-jaw chuck Schunk Rota NCF 250  1 2-jaw chuck Schunk Rota NCF 250  1 Impact head WTO  2 driven tools CAPTO-axial tool  2 driven tools CAPTO-axial radial tool  3 driven tools CAPTO-radial tool  7 fixed tool holders Pjdpfx Aevr Tkzedzera  Mounting elements  Documentation

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Psdex Rywkspfx Adzsra

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 219 h, maximum speed: 40 km/h, Operating hours: 219, First registration: 16.01.2024 _____ Max. load capacity: 4,200 kg Max. lift height: 7,000 mm Max. outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J 3.6 l displacement, water-cooled Output: 100 kW (136 HP) 2,300 rpm Hydraulic reversing fan Emission Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement EPD PLUS incl., with optional automatic rpm increase Mineral-based hydraulic oil HVI 46 Transmission: 2 speeds, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 electronic joystick with capacitive enable incl. direction selector switch CS = hydropneumatic cab suspension Telescopic boom: 2-section with electronic end-position dampening (Soft Stop) Quick-attach device carrier Type "ZM2" hydraulically controlled from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Permanent all-wheel drive Axles: fixed front axle, oscillating rear axle Brake system: servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Frame: high-strength steel design Hydraulic system: variable displacement pump "LOAD SENSING" Working hydraulics flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow rate: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shutoff Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear mounting plate for tow bar, hydraulic reversing fan, radio prep, work lights on cab (2 front, 2 rear), preinstalled function for auxiliary hydraulics at boom head, 2 hydraulic connections at boom head, load protection guard on attachment carrier, road lighting, automatic main battery disconnect, electrical cable in boom, acoustic reverse signal, lift cylinder support for safety Special equipment: EU homologation as tractor/ towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connector Air conditioning Boom suspension (B.S.S.) LED work lights on cab (2 front, 2 rear) 2 work lights at the end of the first boom section (base boom) ASCS upgrade: monitor with all ASCS functions + thumb... Predpfx Aopcht Hodzoa

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery Prsdpfjuycgfex Adzoa - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Predpfjyv S Ufox Adzoa Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: excellent (used), functionality: fully functional, power: 41.92 kW (57.00 HP), first registration: 10/2021, fuel type: diesel, color: orange, fuel: diesel, operating hours: 562 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C 55 SC - Low-emission diesel engine, - Engine compliant with emission stage 5 / Tier 4 final - 4 cylinders Psdpfx Aszd D R Eedzera - Power output 42 kW (57 hp) - Single-operator comfort cab with heating - Air conditioning - Tires: turf tires + winter tires + fenders, upon request - SDS driving comfort - Driver's seat with air suspension, backrest extension and lap belt - Wheelbase 1,820 mm instead of 1,700 mm as in C270, resulting in a vehicle 120 mm longer - 2 additional work lights at the front - Hydraulic Set 2 (3 double-acting control valves, 2 with floating position, 6 front quick-release couplings 2 rear quick-release couplings, connected via a T-piece with a front quick-release coupling, active hydraulic tilt adjustment, 1 multi-function joystick for 5 double-acting functions, including direction switch and speed control) - Hydraulic Set Flow Divider 1 (Flow divider for circuit 1, adjustable from 0-35 l/min with hose set to the front and rear, return line at the front and rear) - Hydraulic tilting system for superstructure frame - Heated exterior mirrors - Central lubrication system - Reinforced axle load distribution - LED rotating beacon - Front linkage, category 1, with hydraulic tilt adjustment - Hydraulic tilting system for cab - Locking bar - Hydraulic implement adjustment pump with 0-80 l/min - Mechanical front PTO shaft, 1,000 rpm - Work lights at the rear - Electrical socket, 7-pin, at the front - Electro-hydraulic implement relief - High roof - Color: Holder Orange RAL 2004 - Hydraulic oil level warning system - Reinforced axle load distribution The Kugelmann salt spreader and the front sweeper are not included in the offer and can be purchased separately if required. Subject to changes, typographical errors, and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, Year of construction: 2008, Technical details: Pedpfxelqac So Adzora max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: excellent (used), Steel grinding machine Manufacturer Klingel Type HSM with 4 stations 2 grinding wheels, diameter 200 mm 1 lapping wheel, diameter 100 mm Psdpfxjw Stmye Adzsra 1 lapping wheel, diameter 150 mm with coolant system 380 Volt Space requirements: Length 1200 mm Width 1200 mm Height 1500 mm with pallet Weight 530 kg with pallet

Condition: new, table diameter 340 mm table load 160 horizontal kg. Podsxabm Njpfx Adzora table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, Trovalizing and lapping machine Pjdpfxjdwq Hgo Adzjra Manufacturer: ASSFALG Model: TV 95-SL Condition: New machine Speed: 1,500 - 3,000 rpm (stepless) Internal dimensions of the trough: 498 x 384 x 410 mm Filling volume: 70 l Standard equipment: - Timer - Water tank - Water pump - Operating manual

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 11176, We are offering this used CemeCon CC 800/9 HIPIMS Magnetron Sputtering PVD System, year of manufacture 2006. Manufacturer: CemeCon Model: CC 800/9 Serial number: 11176 Year of manufacture: 2006, upgraded in 2013 and 2025 Weight: 3,000 kg Protection rating: IP 20 Power rating: 166 kVA Evaporators: 6 Voltage: 3x400/N/PE V Frequency: 50/60 Hz Cemecon CC800/9 HIPIMS - 6 cathodes - All cathodes DC, 2 also HIPIMS capable - Booster anodes - 4 gases, 1 of which is flammable - BIAS: DC, MF-pulsed, or HIPIMS - 3x heating - 2 turbo pumps - 6-position substrate holder Prjdpfx Ajx Tt T Redzja - Multiple targets - Includes option for BNC terminal for Peak I, U, and P at HIPIMS cathodes + BIAS - Extensive accessories such as loading material, spare parts, consumables - In 07/2023, the system control was upgraded to the latest standards and a manufacturer service was performed. A bundle option is also available including a chiller, a precision substrate cleaning system, and a lapping/polishing machine. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Has been used for welding round seams on PTO shafts. Can be used for many other round items. Adjustable speed on motor. Prsdpohwhnyjfx Adzea Can run automatically with signal to welder. Can run 1 lap or continuously. Max workpiece length 1600 mm. Can be extended very easily. Transport can be arranged. I also have a C-press with lots of different dies for aligning many types of shafts, solid and tubes. I also have welders in different sizes and types.

Condition: used, Year of construction: 2001, functionality: fully functional, Thread sewing machine equipped with a 4D sheet feeder: 4 openings above, 4 openings below, and LAP system for section opening with claw. Monitor, electronic programming of the openings, automatic pre-setup, thread cutter. Psdpfx Aexdmxledzjra

Condition: not inspected (used), functionality: unexamined, Hartridge Diesel Injector Service Equipment – Injectomatic One + Injector Reconditioning Machine Manufacturer: Leslie Hartridge Ltd Country of Manufacture: England Machines Included 1. Hartridge Injectomatic One – Nozzle Reseating Machine 2. Hartridge Diesel Injector Nozzle Reconditioning / Grinding Machine _____ Description Complete diesel injector service equipment setup manufactured by Hartridge, a globally respected manufacturer of diesel fuel injection testing and service equipment. This package includes the Hartridge Injectomatic One nozzle reseating machine along with a Hartridge injector nozzle reconditioning / grinding machine, used for restoring and servicing diesel injectors. These machines were widely used in professional diesel workshops for injector maintenance and refurbishment. _____ Hartridge Injectomatic One • Diesel injector nozzle reseating machine • Used to restore worn injector sealing surfaces • Precision alignment and controlled reseating process • Timer control and emergency stop • Industrial workshop equipment _____ Hartridge Injector Reconditioning Machine • Precision injector nozzle grinding / lapping machine • Used for injector repair and refurbishment • Heavy-duty Hartridge engineering • Includes fixtures and tooling shown in photos • Ideal for diesel injector service workshops _____ Applications • Diesel fuel injection service centers • Agricultural machinery repair workshops • Truck and heavy equipment maintenance Prjdpfx Adeyx Sg Hszsa • Diesel engine specialists • Technical training facilities

Condition: used, Year of construction: 2019, functionality: fully functional, For sale: Unigrind KSM600 flat surface grinding/lapping table. The equipment is in good condition and fully operational. Inspection and testing on site are possible. The Unigrind KSM600 is designed for grinding and lapping flat sealing surfaces. It is suitable for machining and refurbishing surfaces of valves, gates, flanges, and other industrial components. Specification: Model: Unigrind KSM600 Stationary flat surface grinding/lapping table Intended for machining flat sealing surfaces Suitable for valve, gate, and flange repair Robust industrial housing Stable and precise processing Simple and user-friendly operation Professional industrial equipment Prsdpey R Rl Sofx Adzea More information: Unigrind KSM600 Suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be happy to assist you.

Condition: used, Perfectly working grinding machine "станка 3Л722" Basic parameters Accuracy class A Maximum workpiece dimensions (length x width x height) 1250 x 400 x 400 Maximum dimensions on electromagnet 1250 x 400 x 280 Minimum dimensions on electromagnet 50 x 40 x 3 Distance from the spindle axis to the table mirror mm 210..625 Maximum product weight kg 600 Maximum weight on electromagnet 400 Machine work table Dimensions of table work surface (length x width) 1000 x 400 Table feed speed 3..35 Grinding head Dimensions of grinding wheel ПП450х80х203 Grinding wheel speed/min 1460 Maximum grinding speed m/s 34.4 Maximum diametrical feed, mm 430 Accelerated transverse disc feed m/min 1,2 Automatic cross feed for each table feed mm/rev 1..60 Maximum vertical disc feed, mm 415 ?? 0,002 ?? 0,2 Automatic vertical disc advance, mm 0,002..0,128 Vertical accelerated advance speed, m/min 0,2 Electrical equipment Number of motors 13 Disc spindle motor power, kW 11 Hydrostatic pump motor power 4 Hydrostation air heat exchanger motor power 0,09 Lubrication system pump power 0,25 Podpfx Adsqwzt Nezera If you have any further questions, we will be happy to answer them.