Used Kuper Fw 1150 for sale (56)

Condition: used, Year of construction: 2006, Four-sided planer Little Kuper SWT 23 XL-6 Year of construction 2006 min/max Working height 8/125 mm min/max Working width18/230 mm Working speed 6/28 m/min Spindle speed 6000 rpm Spindle diameter 40mm engines Lodpfx Aexyvzusalohd 1st. Spindle - under 5.5 kW 2nd Spindle - right 5,5kW 3rd Spindle - left 7.5kW 4th. Spindle - above 11kW 5th. Spindle - above 7.5kW 6th Spindle - under 7.5kW Main fuse 105 amp. Dimensions 7500 x 2000 x 1850 mm (L x W x H), weight 4000 kg - Year: 2006 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1993, voltage 220 V collets 8mm Motor output 1,8 kW Lhsdpfx Ajyk Ibisalsd

Condition: new, Number of spindles 4 St. Working width 15 - 230 mm Working height 10 - 125 mm Ljdpfx Ajyhq Ugealjhd Feed speed 6 - 24 m/min.

Condition: used, machine/vehicle number: 005989, Max length workable: 1500 mm Lodpfx Ajwucl Sjalohd

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Film shrink system Ledpfx Aasyh Nd Djlshd Manufacturer: Kuper Machine type: ST/I-1200 Machine number: 7560 Year of manufacture: 1991 Connected load: approx. 51kW Working width: 1200mm We have recently dismantled this system. We are still in contact with the person who operated the machine. Documentation is included.

Condition: excellent (used), Catalogue number: 7551 TECHNICAL DATA Veneer thickness: 0.4-2mm Passage width under body: 920mm Foot pedal control Table dimensions: 1250x340mm Lhjdpox Tpmtefx Aaled 2 metal pressure rollers Air requirement: 6 bar Bottom-driven rubber roller 2 smooth, metal drive rollers Motor: 0.55kW Dimensions (L/W/H): 1400x550x1500mm Weight: 205kg – German production – Unpainted – DTR documentation – Very good condition – Used stitching machine Net price: 6900 PLN Net price: 1640 EUR, depending on the exchange rate 4.2 EUR (Prices may vary with greater fluctuations)

Condition: used, Year of construction: 2008, Working width: 260 mm Working height: 130 mm Number of working spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Grooved bed: yes Motor power bottom spindle: 5.5 kW Motor power right spindle: 5.5 kW Motor power left spindle: 7.5 kW Motor power top spindle: 7.5 kW Motor power bottom spindle: 7.5 kW Bottom spindle adjustment: handwheel Right spindle adjustment: handwheel Ledpfoyhgkdox Aalohd Left spindle adjustment: handwheel Top spindle adjustment: handwheel Cutterheads: Centrolock Feed speed: stepless Feed roller pressure: pneumatic Current consumption: 50 A Current consumption: 71.7 A Motor brake: automatic Extraction connection: Machine length: Machine width: Weight: 4500 kg

Condition: used, Electric motor, three-phase motor Ledpodzzimsfx Aaljhd -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 19 x 50 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 260/180/H150 mm -Weight: 6.1 kg

Condition: ready for operation (used), Working width 300 mm Mechanical oscillation Shoe Weight approx. 450 kg Star-delta motor start Lhsdpfxsyux Sye Aalsd 380 V

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Lhedpfx Aoxtat Ujaled Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Table lenght 2000 mm. Workingwidth: max. 230 mm / min. 18 mm. Workingheight: max. 150 mm / min. 8 mm el height adjustable Speed 7-36 m/min. 3,7 kw motor, cardan 5 pcs. Ø 40 mm. spindels: b + r + l + t + b (specifikations see file attached Siemens touchscreen Lhjdpfxexr U Azj Aalod see all technical features attached file

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Ledpfx Asyayumealshd Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: used, used Ledpfx Aaovwf Dwelohd manufactured by Kuper type Mini 420 range 420 mm thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee

Condition: excellent (used), functionality: fully functional, glue thread sealer zigzag stitching clearance 630 mm heating element temperature adjustment foot pedal control power supply 230V year of manufacture 2001 Lhsdpfx Aasymn Hdjlod CE marking

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 2166, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,200 rpm, working height: 125 mm, TECHNICAL DETAILS Minimum working height: 8 mm Maximum working height: 125 mm Minimum working width: 18 mm Maximum working width: 230 mm Minimum feed speed: 6 m/min Maximum feed speed: 28 m/min Spindle speed: 6,200 rpm Spindle diameter: 40 mm MACHINE DETAILS Electrical Data Main fuse: 80 A Machine voltage: 400 V, 3PH, 50Hz Motors Bottom spindle: 5.5 - 7.5 kW Right spindle: 5.5 - 7.5 kW Left spindle: 7.5 - 10 kW Top spindle: 7.5 - 10 kW Dimensions & Weight Lhsdewyviuspfx Aalsd Dimensions L x W x H: 4,400 x 2,000 x 1,850 mm Weight: 4,000 kg

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Lhodpfx Aaokn Rz Hslod Width: 2350 mm Height: 1850 mm

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, type of input current: three-phase, product height (max.): 650 mm, product length (max.): 3,000 mm, product width (max.): 1,350 mm, overall weight: 2,300 kg, pass-through width: 1,400 mm, input frequency: 50 Hz, nominal power: 59 kW (80.22 HP), temperature: 220 °C, Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 Lhsdpfx Aoxt Idbsalsd max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: good (used), Column projection 910 mm Feed approx. 15 m/min. constant Drive motor 0.18 kW Total connected load 0.45 kW Ljdjqwzfiepfx Aaljhd You can call or write to us. We can speak and write German and Russian. You can also send messages in English 13.2.7.

Condition: new, functionality: fully functional, Practical – ready for immediate use without instruction. The devices are ready for operation after just 5 minutes of heat-up time. The integrated temperature controller allows stepless adjustment of the heat as needed – ensuring the optimal melting temperature for the adhesive thread. The pressure applied with the hand gluer is sufficient to firmly press the adhesive thread onto the veneer sheet. Key advantages at a glance - only approx. 5 minutes heat-up time Lhsdpsxdxlkjfx Aaled - precise, straight-line bonding - clean thread separation - maintenance-free Item no. 0132772

Condition: new, functionality: fully functional, For efficient and clean joining of smaller quantities of veneer. A special KUPER glue thread is applied to the joint in a zigzag line. Easy and simple to handle, ready for use quickly, and features low power consumption. Lhjdpfx Ajxdxbfoaljd All the advantages of the KUPER glue thread. An ideal device for assembling smaller quantities of veneer. The device is supplied fully equipped (ready to connect) with a 2.75 m connection cable (for 230V mains voltage). Net weight: 1.9 kg Gross weight: 2.4 kg Standard accessories: 1 test spool of original KUPER glue thread type K 12, 10 threaders Glue thread available on request! Item no. 0121383

Condition: new, functionality: fully functional, Standard equipment: - Pneumatic clamping via 2 external clamping cylinders - Saw carriage guided by 2 high-precision linear guides - Extraction device for connection to a dust extraction system, connection diameter 100 mm - 1 carbide-tipped saw blade, diameter 200 mm - Front support, 250 mm wide, fixed installation, manually adjustable with planing unit - Maintenance unit Opening height: 57 mm Veneer pack cutting height: 32 mm Three-phase motor: 2.2 kW Operating voltage: 230/400 V Lsdpfxjxd Sf Ro Aalshd Item no. 0174200

Condition: new, functionality: fully functional, For repairing and cross-gluing veneers. Damaged or torn veneers are reliably repaired with the simplest handling. Combined veneer strips achieve optimum tear resistance thanks to end cross-gluing. The perfect design fully utilizes the advantages of the KUPER glue thread. The practical construction of the device allows immediate use without extensive training. After an approximate preheating period of 5 minutes using the temperature controller (sold separately), the KHL 1 is always ready for operation. Light pressure is sufficient to efficiently apply the glue thread to the veneer sheet. Smooth operation is ensured by maintenance-free use. Lhedpfx Aajxdxk Heljd Net weight: 1.2 kg including 1 spool of glue thread 1.8 kg with temperature controller Gross weight: 2.5 kg Standard accessories 1 test spool of original KUPER glue thread type K 3, 10 threaders, 1 operating manual, item no. 51204 Item No. 0132771

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total length: 3,950 mm, total width: 1,220 mm, total height: 1,610 mm, overall weight: 1,900 kg, Fully automatic large-format edge polishing machine with CNC control and pivoting milling/polishing unit for finishing sawn or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for the processing of composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently retrieved via the integrated material library, based on the material to be processed and the desired surface finish. A tool recommendation and the corresponding setup for the specific operation are also displayed. Ledpfxexd Si As Aaljhd The high precision of the polishing table significantly reduces the formation of streaks during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Specific features: - CNC control with material library - Machine body and front stop - Milling/polishing unit - Working area - Multifunctional table - Tools Technical data*: Material thickness (0°/45°/60°): 2 - 120/85/60 mm Material length: 20 - 3,050 mm (with turnover) up to 6,100 mm Table width: 525 mm Pivot range: 0° - +63° Milling depth (0°/45°/60°): 0.05 - 1.5/3/3 mm Spindle speed: 6,000 - 12,000 rpm Feed speed: 0.1 - 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 inserts) Tool: Not included *Subject to material tests, depending on material type, tool equipment, and surface finish Scope of delivery: - 1 operating manual Item no. 0175200

Condition: new, functionality: fully functional, - Device for unrolling and moistening joint paper; including operating manual - for use with joint paper up to 20 mm wide Required joint paper available on request! Lodpfx Aaoxd Sldjljhd

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, OUR BESTSELLER – 1000 mm Throat Depth Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional). NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted and made available centrally for analysis (optional). Additional modules for monitoring power and compressed air consumption available (optional). SPECIFIC FEATURES - Innovative veneer feeding system with disc wheels and tolerance compensation mechanism for jointing without offset - Low-maintenance, energy-saving, and veneer-friendly high-performance plastic chains (excellent sliding properties, minimal heat conduction, and no discoloration) - 12 mm slim, chrome-plated heating rails ensure minimal stress on veneer due to shrinking, and significantly reduced energy consumption - Intelligent automatic energy management for standby and operating mode - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm, optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar *Subject to material testing, depending on wood species and micro or thick veneer package (option) only without micro and thick veneer package (option) Lhjdpfx Asxdxktoalod GLUES Suitable for urea resin adhesive Glue offer available on request! Item No. 0164700