KRÜSI chalet building machine TYPE CM 40

Krüsi CM40

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 1996 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm Hodpfx Aevfv Tfefnsfc From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: used, Technical details: Hsdpfeu Nwd Dex Afnjfc power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 64 kg dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 without hose package without grounding cable *

Condition: good (used), Year of construction: 1994, I sell the automatic CNC working centre for BLOCK-HOUSE production Krüsi CM-40. Year 1994. Incutting saw Tenoning head Top + Bottom Tenoning head Left + Right Dowel drilling unit 4-head milling unit Automatic feeding system +-1mm Entry length 12m Hodpfor Atcysx Afnjfc Suitable for wooden house constructions! Available immediately.

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Hfjdpfju Uh T Dex Afnoc Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Hsdpfx Afehclffonefc Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: used, Holtec package cross-cut saw - hydraulic lowering of the saw blade - length measurement Hjdpfx Aoxzr Efefnofc - hydraulic package ejection

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Hfsdpfx Ajvvkt Isfnsc Storage location: Nattheim

Condition: used, Year of construction: 1999, Carrying capacity: 19.990 kg Hedpfstr H Enjx Afnjfc GVW: 8.010 kg Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Front tyre size: 245/70 R 17.5 Rear tyre size: 245/70 R 17.5 Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg Hedpfxecqvhws Afnefc - available immediately -

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- Hsdpfx Afsvu Hfqonjfc > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...