Used Kolbus Perfect Binder for sale (108)

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production Pgedey Uvfrepfx Ac Aot - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Pgjdpfx Acoxuad Aj Ajt Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Condition: used, Year of construction: 2005, Gathering machine Kolbus ZU 841.A Description: - Hand feeding station - Number of gathering stations: 12 - ATC thickness control - Optical sheet control: Baumer Optronic - Set up element - Pile delivery with delivery conveyor: ZA 841 - Intermediate element - Transfer into the binder - Pump(s): Becker Aircenter Perfect binder Kolbus KM 473 Year: 2005 Description: - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station Psdpfx Aeyhdd Uoc Aegt - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Gauzing station - Pile cover feeder: RA 48.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 33-010, 16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system. Psdpjh T Dhqofx Ac Aegt

Condition: used, Year of construction: 2002, functionality: limited functionality, We are selling our complete perfect binding line, including: ZTM 18 stations (16 feeders + 2 manual stations) Three-knife trimmer HK 151.P 593, optionally with all cassettes and dies Drying tower Complete conveyor system with outfeed station PUR gluing system Hot-melt gluing system Optional: Disc gluing system Optional: Compressed air unit Optional: Replacement milling cutters Optional: Replacement knives The binder has been in operation with us for 5 years and has been brought into top condition with a total of €300,000 in maintenance and repairs. For example, various feeders have been replaced (approx. €5,000 per feeder). The binder has been idle for just over 2 years due to a staffing situation. The binder is currently being dismantled by a specialist company, which would also be able to install and commission the binder at the buyer’s location. The binder needs to be sold because we are installing a new printing press and need the space. Option A: Sale of the complete system Option B: Sale of individual components Podpfsz Eynyex Ac Aogt We would be happy to provide further pictures or a short video showing the setup/current layout of the binder.

Condition: used, Year of construction: 1995, Klebebinder mit Vorsatzanleger / Perfect Binder Kolbus Ratiobinder KM 470 with endsheet feederBaujahr 1988/1995 Kolbus Ratiobinder KM470 23 Zagne Format / Size min 125 x 100 x 3mm / max 460 x 310 x 60mm Buchblockdicke min. 3mm - max. 60mmAussattung / Consist of: Zusammentragmschine / Gatherer ZU 803 32 Stations Links- und Rechtslauf / Left and right side Criss-Cross Auslage / Criss-Cross delivery Anleger Vor- & Nachsatz für Hardcoverproduktion / Feeder for endsheet hard cover production Handanleger / Hand fed stationRatiobinder KM 470 mit 25 Zangen / Ratiobinder KM 470 with 25 Clamps PUR Rückenleimwerk / PUR spine gluing unit Hotmelt spine gluing unit PUR-, Hotmelt- und Dispersionsklebebindung / PUR, Hotmelt and dispersion glue binding Seitenbeleimung Heißleim / Hotmelt side gluing unit Fälzelstation / Back Lining station Buchblock- und Ganzpresse FM 405 für fadengeheftete Buchblocks für HardcoverproduktionKolbus FM 405 Buchblock- und Ganzpresse FM 405 für fadengeheftete Buchblocks für Hardcoverproduktion Book block and PRessing Station FM 405 for sewing book blocks and hard cover productionsDreischneider / Three knife Trimmer Kolbus HD 150 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Pgjdpfxsn Aw Uks Ac Aet Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2005, PUR + EVA Hotmelt spine glue unit Pgodpfszat E Ssx Ac Ajt Kolbus Year 2005 Roller system With mode selector switch (PUR or EVA-Hotmelt) Compatibel with: KOLBUS KM 473 perfect binder

Condition: used, Year of construction: 2005, PUR + EVA Hotmelt spine glue unit Kolbus Year 2005 Roller system With mode selector switch (PUR or EVA-Hotmelt) Compatibel with: KOLBUS KM 473 perfect binder Psdpfx Acezat His Aogt

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Pjdpfot Rmhaex Ac Aegt

Year of construction: 2023, condition: used, KOLBUS Grooving Machine NM 101 year 2023 For cutting grooves into cardboards. Configuration: - adjustable knife mountings with knife head from 90° to 110° (2 pcs.) - v-groove knife blades (16 pieces) - setting device for the knife mountings - stack/stream cover delivery by means of a conveyor belt - automatic chip removal from the machine - servo-controlled drive technology based on Siemens technology - infeed with cardboard feeder CF 750 - processing in the double magazine - product outfeed with 1.500 mm roller conveyor - digital display of the knife positions for one knife holder - grinding device for sharpening the knives Technical specifications: number of grooves per operating step: 1 - 8 grooves in transport direction cardboard thickness max.: 4 mm cardboard thickness min.: 1 mm Pjdpfx Acoz E Nyxj Aegt distance between grooves (single cut) on 2 knife holders min.: 1 mm distance between grooves on one knife holder min.: 40 mm spacing from the first groove to the outer edge of the cardboard min.: 15 mm

Year of construction: 2022, condition: used, KOLBUS Box Production Line BLT 200 + BLW 200 year 2022 For the automatic production of raw boxes from cardboard blanks as well as the lamination of the boxes. The BLT 200 is used for uprighting punched and grooved cardboards and the BLW 200 is used for laminating boxes. Overview: BLT 200 box line taper BLW 200 box line wrapper Configuration: BLT 200 box line taper · copilot system with touch screen · cardboard feeder · uprighting channel · 4 heat-sealing tape stations · 2 sets of knives (4 pcs. each) · 2 sets of counter knives (4 pcs. each) · servo-controlled drive technology based on Siemens technology · delivery incl. inline coupling with box line wrapper BLW 200 Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 3 mm cardboard thickness min.: 1 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm Psdpjz E Npmjfx Ac Ajgt BLW 200 box line wrapper · copilot system with touch screen · cloth feeder · hot gluing station with premelter · glue application adjustment from the outside · viscosity controls · buffer zone for feeding the boxes · cloth transport with vacuum conveyor · camera system for precise positioning of the boxes on the cloth · robot for positioning the boxes on the cloth · rub down station · 4 laminating stations for laminating boxes · 10 format plates (1.000 mm x 215 mm x 15 mm) · servo-controlled drive technology based on Siemens technology · infeed incl. inline coupling with box line taper BLT 200 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm cardboard thickness max.: 3,0 mm cardboard thickness min.: 1,5 mm cloth length max.: 815 mm cloth length min.: 120 mm cloth width max.: 605 mm cloth width min.: 120 mm

Year of construction: 2022, condition: used, KOLBUS Box Line Assembler BLA 500 year 2022 For assembling box cases and boxes or box cases and flat blanks. Overview: BLA 500 box line assembler Podpfjz E Npaex Ac Asgt CP 500 blank placing module BP 200 twin box placing module (year 2019) BP 500 box placer SG 500 side gluer Configuration: BLA 500 box line assembler · copilot system with touch screen · device for gluing box cases · servo-controlled drive technology based on Siemens technology · infeed with cardboard feeder CF 500 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min box case width max.: 735 mm box case width min.: 205 mm box case height max.: 525 mm box case height min.: 140 mm box case thickness max.: 4,0 mm box case thickness min.: 1,5 mm CP 500 blank placing module · module for placing flat blanks on glued box cases Technical specifications: flat blank width max.: 800 mm flat blank width min.: 200 mm flat blank height max.: 800 mm flat blank height min.: 200 mm BP 200 twin box placing module (year 2019) · module for placing two boxes on glued box cases Technical specifications: box width max.: 170 mm box width min.: 100 mm box height max.: 42 mm box height min.: 20 mm box length max.: 250 mm box length min.: 100 mm cardboard thickness max.: 4,0 mm cardboard thickness min.: 1,5 mm spacing between boxes max.: 405 mm spacing between boxes min.: 140 mm BP 500 box placer · module for placing boxes on glued box cases Technical specifications: box width max.: 310 mm box width min.: 65 mm box height max.: 170 mm box height min.: 20 mm box length max.: 400 mm box length min.: 130 mm cardboard thickness max.: 4,0 mm cardboard thickness min.: 1,5 mm SG 500 side gluer · module for raising and gluing the sides of the box case to the box Technical specifications: box case height max.: 405 mm box case height min.: 140 mm

Year of construction: 2024, condition: used, KOLBUS Box Production Line BLP 500 + BLF 500 year 2024 The corner punch BLP 500 is used for punching cross grooved boards and the box line former BLF 500 is used for production of rigid boxes from cross grooved and corner punched boards. Overview: Pgsdpez E Riuefx Ac Aet BLP 500 box line puncher BLF 500 box line former Configuration: BLP 500 box line puncher · copilot system with touch screen · 1 set (4 pieces) of knife holders · 5 sets (40 pieces) of knives · 3 sets (12 pieces) of cutting sticks · waste delivery out of the machine via transport conveyor · servo-controlled drive technology based on Siemens technology · infeed with cardboard feeder CF 500 · delivery incl. inline coupling with box line former BLF 500 Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 4 mm cardboard thickness min.: 1,5 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 15 mm BLF 500 box line former · copilot system with touch screen · cold glue device with 1 set (4 pieces) 0,3 mm gluing nozzles for gluing grooves · box forming device to turn-up of the side panels · holding station for glue drying · servo-controlled drive technology based on Siemens technology · infeed incl. inline coupling with box line puncher BLP 500 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 4 mm cardboard thickness min.: 1,5 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 15 mm

Year of construction: 2022, condition: used, KOLBUS Box Line Taper BLT 200 year 2022 For the automatic production of raw boxes from cardboard blanks. The BLT 200 is used for uprighting punched and grooved cardboard. Configuration: copilot system with touch screen cardboard feeder uprighting channel 4 heat-sealing tape stations 2 sets of knives (4 pcs. each) 2 sets of counter knives (4 pcs. each) servo-controlled drive technology based on Siemens technology Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 3 mm Pedjz E Npgepfx Ac Aegt cardboard thickness min.: 1 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, KOLBUS DA 260 Pedpfxjz Ebbne Ac Aogt Case Making Machine Manufacturer Kolbus GmbH & Co KG, Rahden, Germany Production Year 2015 • Max. speed 40 cycles/min • Spine strip (roll) max. 500 mm • Mounting diameter 60 mm • • Production options: • • Book cover: • Open format min. 140 x 205 mm • Max. 390 x 670 mm • Hinge width 4 – 18 mm • Outer insert width 14 – 120 mm • Closed hinge width 8 – 15 mm • • Canvas in the spine of a book • Width 223 – 708 mm • Height 130 – 428 mm • Cover boards: • Thickness 1 – 4 mm • Width 95 – 328 mm • Height 140 – 390 mm • Spine board: • Thickness 1 – 4 mm • Width 6 – 90 mm • Spine strip (roll) • Thickness 0.3 – 0.6 mm • Width 6 – 90 mm • Availability immediately Sale Reason production reduction Condition of the Machine very good condition, well maintained, worn out according to its agecan be seen running

Condition: excellent (used), Year of construction: 2015, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, safety light barrier, Kolbus Cantobox / Boxline – Complete rigid box line – 2015/2016 – Excellent condition For sale: Kolbus Cantobox / Boxline, a complete and fully equipped rigid box production line, built 2015–2016, recently acquired and in very good technical and optical condition. This line is designed for professional, industrial production of luxury rigid boxes, cases and covers, and represents genuine German engineering quality. Pgodozq Txljpfx Ac Aot ⸻ Line configuration * SW.A 500 – Automatic carton infeed (blank feeder) * SW.H 500 – Quadformer & holder * SW.E 500 – Corner cutter * SW.L 400M – Puncher * TS.L – Transfer / turning station * Complete CE safety enclosure * Integrated Kolbus control system with HMI * Fully automatic continuous operation ⸻ Production capacity * The complete line operates with individual module speeds between approx. 25 and 40 cycles per minute, depending on box size, material and machine setup. ⸻ Technical details * Manufacturer: Kolbus GmbH & Co. KG (Germany) * Year of manufacture: 2015 / 2016 * Power supply: 3 × 400 V / 50 Hz * Compressed air: approx. 6 bar * CE marked * Made in Germany ⸻ Condition * Very clean and well-maintained line * Low mechanical wear visible * Original Kolbus components throughout * No structural modifications * Includes tooling, spare parts and manuals ⸻ Applications * Rigid boxes / luxury boxes * Premium packaging * Hardcover and case production ⸻ Location & delivery * Machine located in The Netherlands * Inspection possible by appointment * Professional dismantling and loading available * Worldwide export assistance possible ⸻ Price: €125,000 (ex works / loaded on truck – strongly competitive for this configuration) Availability: immediately

Condition: used, Transport Band z.B. für Klebebinder / Transport Belt for example for Perfect Binder Kolbus FS.L 683 Transport Band / Transport Belt Kolbus FS.L 683 Baujahr / Year 1988 - SN. 737 mit Eigensteuerung / with SelfControl Psdpfx Ajxvcntsc Aegt Geschwindigkeit regulierbar / Speed ​​adjustable Höhenverstellbar / Height adjustable Bandlänge / Band length 150cm, Bandbreite / Band width 38cm Bandhöhe / Band high 90cm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2006, Card gluer Clever & Co Year: 2006 Pgsdohd Nkdopfx Ac Ast Hotmelt glue unit Nordson Description: - Suitable for: Kolbus KM 411 - Excl. universal bases

Condition: used, Year of construction: 2011, Three knife trimmer Kolbus HD 143.P Year: 2011 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Counter: 12.560.000 books Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker Pgodpjz Eaq Ijfx Ac Ajt - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: 7.500 single products/hour or 4,200 single products/hour from 40 mm product thickness on Maximum size (cutted): 305 x 420 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 320 x 450 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Vollautomatisches Palettieren von losen Stapeln und festen Gebinden mit einer Geschwindigkeit von bis zu 1,800 Stapel/Std. Fully automated palletizing of loose stacks and solid containers at a speed of up to 1,800 stacks/hr. Automatischer Palettierer / Automatic Palletizing Kolbus PL 770 Baujahr / Year 2007 - Serial-No. 66 Produktzufuhr über Staurollenbahn / product infeed via accumulating conveyor Drehpaternoster 90° / 180° inkl. Eintaktung / rotary paternoster 90° / 180° inkl. synchronisation Verfahranschlag zum Absetzen von besonders glatten Produkten / travel stop for dropping of very smooth products Palettenauslage gerade / pallet delivery straight Palettenentnahme in Laufrichtung / pallet removal in moving direction Pallet sizes 1,360 x 1,200 or 1,000 x 800mm Speed 30 Stacks/min Pgjdpfx Acoydfype Ajt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2009, condition: used, Case maker Kolbus DA 270 Year: 2009 Description: - Digital display - Semi automatic setting - Automatic case counter - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Pressing station Pedpfxsz A A I Do Ac Ajgt - Stacking delivery - Belt delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Joint width: 4 - 15 mm Cloth width: 223 x- 708 mm Cloth height: 130 - 428 mm Board thickness: 1 - 4 mm Board width: 95 x 328 mm Board height: 140 x 390 mm Max. mechanical speed: up to 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Pgodpfezhwu Esx Ac Aet Year: 2017 Equipped with: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variation from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Kolbus SW.E 500 is a high-performance corner-cutting machine for the industrial processing of high-quality cardboard packaging. It was specifically designed for the automated production of luxury packaging and rigid boxes. Pgsdpfxjzblxmj Ac Ast The Kolbus SW.H 500 is a high-performance box-making line from the German manufacturer Kolbus Group GmbH. The machine processes pre-scored and corner-cut cardboard sheets. The Kolbus SW.H 500 applies adhesive to the pre-formed creases, erects the side walls, and precisely fixes them to create a stable, foldable rigid cardboard box.

Condition: used, Year of construction: 2011, Gathering element Pjdpfx Acezhvinj Asgt Kolbus ZU 832.A Year: 2011 Description: - Number of elements: 1 - Number of gathering stations: 3 - ATC thickness control - Optical sheet control: Signalynx Please note: A total of 3 elements are available - if you are interested, please send us an enquiry Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 285, KOLBUS PE 0 – Hot Foil Stamping and Embossing Machine for Hardcover Covers Identification Data • Manufacturer: Kolbus GmbH & Co. KG, Germany • Type: PE 0 • Serial number: 285 • Year of manufacture: 1984 Purpose and Technology Pgodpfx Acoz A A Azo Ajt • Purpose: Hot foil stamping and embossing on hardcover book covers • Operating principle: Flat press head – the cover is fed onto the working table, while the upper head performs the stamping • Capabilities: Hot foil stamping and blind stamping/embossing, depending on the installed tooling • Foils: Gold, silver, pigment, and other hot-foil materials • Operating temperature: Approximately 130–170 °C, according to the markings on the machine, depending on the foil and application Construction and Equipment • Infeed and outfeed tables with conveyors on both sides of the press head • Automated cover feeding and transport • Belt drive with drive motor • Protective covers over the drive components • Control panel with buttons and selectors • Cycle counter • Safety devices and emergency stop buttons • Large flywheel – mechanical press operating principle • Mobile design for relocation within the production area Format and Productivity – Estimated • Format: Suitable for A5 and A4 size covers • Productivity: Approximately 1,000–2,000 impressions/hour • Productivity depends on: Format, type of foil, number of impressions per cover, impression length, and operating method Price: €14,000.00