Used Knee Type Milling Machine for sale (110,674)

Condition: used, Year of construction: 1979, spindle diameter 80 mm ja facing slide ja Isdpfx Aaswhq Dvscstn Ja weight of the machine ca. 8,8 t

Condition: good (used), Year of construction: 2008, operating hours: 29,593 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 25 m/min, total height: 3,136 mm, total width: 2,693 mm, total length: 4,175 mm, overall weight: 7,000 kg, Equipment: documentation/manual, The production machine will be available from October 2025! Control system: FANUC 21 iMB We are happy to answer your inquiries by phone. Ijdpfx Aasw Sr H Ejcstn

Condition: good (used), Year of construction: 2000, travel distance X-axis: 4,300 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table width: 2,130 mm, table load: 40,000 kg, table length: 5,000 mm, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortisation due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 4300mm Y-Axis: 1200mm Itodswrcydjpfx Aacen Z-Axis: 1460mm Table Length: 5000mm Table Width: 2130mm Table load: 40000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 10060mm Width: 9100mm Height: 3990mm Weight: 40000kg

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm Isdpfetv H Ucsx Aacstn rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: ready for operation (used), Year of construction: 1982, travel distance X-axis: 1,650 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 3,500 kg, Mitutoyo 3-axis DRO table 2000 x 700 mm Itodjwxyzfjpfx Aacjn travels 1650 x 1000 x 1000 mm automatic lubrication spindle taper SA 40, maximum spindle speed 2066 rpm weight 7500 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: M-970504, travel distance X-axis: 2,500 mm, travel distance Y-axis: 935 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 3,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS CNC control: Heidenhain (2x control units) Travel X: 2,500 mm Travel Y: 935 mm Travel Z: 900 mm Iodpfx Aewpiuvoacetn Machine Table Table size: 2,900 × 800 mm Rotary table size: 800 × 800 mm Spindle Spindle speed: 3,000 rpm Tool holder: ISO 50 Tool magazine: 30 slots Milling head: pivotable Machine dimensions and weight Machine dimensions (L × W × H): 6,500 × 3,200 × 3,500 mm Machine weight: 18,500 kg EQUIPMENT - Dual CNC control with Heidenhain control systems - Large bed table with separate 800 × 800 mm rotary table - Swivel milling head for flexible machining - Spindle with 3,000 rpm and ISO 50 tool holder - Automatic tool magazine for 30 tools - Includes all peripheral devices and documentation - Machine is already dismantled for transport

Condition: used, Year of construction: 2001, x-travel 2708 mm y-travel 1250 mm z-travel 1513 mm table-size 3000 x 1000 mm taper ISO ISO 50 turning speeds 35-6000 U/min working speed 20000 mm/min rapid traverse 25000 mm/min table load 10 t Control HEIDENHAIN TNC-430 weight of the machine ca. 28 t Itodpfswrztcex Aacen

Condition: used, Year of construction: 1999, x-travel 2000 mm y-travel 800 mm z-travel 850 mm control HEIDENHAIN TNC 360 Iodpsv H Ertofx Aacstn total power requirement / kW weight of the machine ca. / t required space / m

Condition: good (used), Year of construction: 1989, Universal head (U-25) Coolant system Hydraulic tool clamping X-Axis: 5000mm Y-Axis: 1200mm Z-Axis: 1500mm Table Length: 5000mm Table Width: 1000mm Table load: 7000 Power on spindle:19kW Spindle speeds: 14 - 2500Rpm Spindle Taper: 50ISO/Bt/Mk Isdpfswq Rkuex Aacjtn Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:7000mm/min. Length: 11225mm Width: 4100mm Height: 3200mm Weight: 19000kg

Condition: used, Year of construction: 1995, x-travel 1200 mm y-travel 600 mm Isdsvw Duhepfx Aacstn z-travel 600 mm table-size 1300 x 600 mm max. workpiece weight 2000 kg spindle taper ISO 50 spindle turning speed - stepless 30 - 3500 U/min feeds -stepless- 1 - 6000 mm/min rapid traverse 10 m/min power capacity - milling spindle 18 kW max. torque on the spindle 500 Nm distance work spindle /surface of the table 267 - 867 mm distance table-vertical head 58 - 658 mm voltage 380 V / 50 Hz control voltage 230 V total power requirement 22 kW weight of the machine ca. 6,5 t dimensions 3,6 x 4,2 x 2,3 mm • CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment • electr. handwheel, • vertical head manually tiltable, • coolant device,

Condition: used, Year of construction: 1978, spindle diameter 105 mm x-travel 1250 mm y-travel 1000 mm z-travel 600 mm table length 1100 mm table width 900 mm Isdpfot Hwtxox Aacstn tool adaptor 50 ISO / MK total power requirement kW weight of the machine ca. t CNC Table Borer, Reconditioned 2002, BOSCH CC 300

Condition: like new (used), Year of construction: 2014, 1 as-new CNC travelling column bed type milling machine Manufacturer: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 1800 mm C-axis travel: 360 degrees Table clamping surface: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Speed range up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Ijdpfswzx Ntsx Aacjtn Equipment / Accessories: Tool magazine Controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Through-spindle coolant (IKZ) Indexing clamp Vertical carousel rotary table D=1600 mm: 250 rpm Clamping field 6000 x 2000 mm Planing slide, etc.

Condition: used, Year of construction: 2018, Bed milling machine, second-hand Make: Austen Model AX 607 Year of construction: 2018 Control unit Basis HH 5-axis HSC bed-type milling machine for machining of long parts, such as beams. Was used for aluminum profiles in window construction and can also be used for light steel machining. steel. Spindle rotates and swivels. Machine moves on linear guides and has direct HH measuring systems. Technical data: X-travel 7000 mm Y-travel 600 mm Z-travel 600 mm Iodpfxou Rfh To Aacotn Spindle speeds infinitely variable 20-20,000 rpm Spindle motor 11 kW Feed range X-direction 0-90 m/min. Feed range Y-direction 0-50 m/min. Feed range Z-direction 0-40 m/min. Tool changing device 15 Pos. Spindle holder 63 HSK- Total power requirement 50 kVA Machine weight 12 to. Space requirement 9x2x2.7 m

Condition: like new (used), Year of construction: 2003, Retrofitted: 2024 Itsdpfxsugbppe Aacjn Numerical control: SIEMENS 840 D Technical features Dimensions Table dimensions: 14.000 x 2.500 mmNumber of T slots: 10T slots dimensions: 22 mm Traverses of axis X axis traverse: 14.000 mmY axis traverse: 3.100 mmDistance between columns: 4.417 mmZ axis traverse: 1.200 mm (220 - 1.420 mm) Milling head Head type: 5 Axis “C5C” Electrospindle 18.000 rpmTool clamping system: HydraulicTaper nose: HSK 63Speed range: 18.000 rpmSpindle power: 25 kW Feedrates Feedrate: 30.000 mm/minRapid feedrate (X/Y,Z): 30.000 mm/min Weight and dimensions Maximum weight on table: 15.000 Kg/m2Machine weight: 135.000 KgMachine dimensions: 15.000 x 8.418 x 6.033 mm Accesories Guarding: YesInternal external coolantAutomatic tool changer: 24 toolsElectronic handwheel: Yes Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: good (used), travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, table width: 1,000 mm, table load: 8,000 kg, table length: 3,500 mm, Manufacturer: Ki-Heung Type: KNC 1000 Control: HeidenHain iTNC 530 Year of manufacture: 2004 Specifications Metric US Standard X-axis 3200 mm Y-axis 1200 mm Z-axis 1600 mm Table length 3500 mm Table width 1000 mm Table load 8000 Spindle power 37 kW Spindle speed 3000 Rpm Tool holder Sk50 ISO/Bt/Mk Feed X-axis 20000 mm/min. Feed Y-axis Iedpjwpuilsfx Aacjtn 20000 mm/min. Feed Z-axis 20000 mm/min. Milling head auto-index 2.5 x 2.5 ° Dimensions (approximate) Length 8200 mm Width 4200 mm Height 3800 mm Weight 18000 kg Please note: The information on this page has been provided by us to the best of our knowledge and ability, and where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute any representation or contractual terms. We recommend verifying all important details.

Condition: used, Year of construction: 1974, spindle diameter 90 mm x-travel 1000 mm y-travel 1200 mm z-travel 1200 mm feed movement 710 mm spindle taper ISO 40 turning speed range 8 - 1600 U/min table-size 1120 x 1000 mm Isdpfx Aajtv Ibdocotn table rotating 360 ° table load 2,5 t total power requirement 11 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 3,3 x 3 m separate switchboard, rapid traverse some tool holders, without valve plate, without steady rest,

Year of construction: 2001, condition: good (used), CNC bed type milling machine Fabr.IBERIMEX-MVR Type: UH-1250 BJ. 2001 Control HEIDENHAIN TNC124 Procedures: X1250mm Y500mm 460 mm Clamping table: 360mmX1800mm Spindle retainer: ISO50 Machine with full enclosure. Itsdpfjd Eranjx Aacsn Machine card see more data. Machine in good condition.

Year of construction: 1982, condition: used, x-travel 970 mm y-travel 420 mm z-travel 430 mm Control Heidenhain TNC 135 number of speeds 12 speeds 31,5-1400 U/min feed range lengthways and crosswise 8-2000 mm/min feed range - vertical 4-1000 mm/min Itsdpfxok H R H Us Aacen rapid traverse longitudinal and cross 4 m/min rapid traverse Z-axis 2 m/min table-size ca. 1300 x 350 mm weight of the machine ca. ca. 3,8 t dimensions ca. 3050x2350x2320 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Bed Type Milling Machine - Universal / Brand: KIHEUNG / PEGASUS / Type: KNC-U800 / Year of construction: 03/2000 The machine can be inspected by appointment under power. Condition: Well-used, in good operational condition (no repairs needed). The machine is in the first ownership. Operating hours: - Control on: 57.567 h - Machine on: 54.527 h - Program run: 16.474 h TECHNICAL DESCRIPTION: Travels: - X-axis: 1.900 mm - Height from table to vertical spindle nose: 50 - 900 mm Itjdpfsvm D Exsx Aacsn - Height from table to horizontal spindle center: 130 - 980 mm - Z-axis: 800 mm Table: - Working surface: 2.300 x 775 mm - Permisssible load max.: 8.000 kg - T-slots: No. 6 x 22H7 - Distance between T-slots: 125 mm Feed: - Axis feedrate: 5.000 mm/min - Rapid feedrate: 10.000 mm/min Spindle: - Taper: ISO 50, DIN 69871 - Speed: 3.000 rpm (0~689 / 690~3.000) Motor: - Spindle drive motor: 18,5 kW - Feed drive motor: X-/Y-/Z-axis: 20/20/20 Nm - Coolant pump motor: 500 W - Lubrication pump motor: 90 W - Hydraulic pump motor: 550 W - Floor space approx.: 5,6 x 4,8 x 3,0 m - Machine weight net approx.: 12 tons EQUIPMENT: - CNC control: HEIDENHAIN TNC 426 - Universal milling head manual - Documentation - CE marking NO tool changer ! There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: like new (used), Year of construction: 1998, Retrofitted: 2024 Iedpfxsugbq Hj Aacotn Numerical control: SIEMENS 840D Technical features Dimensions Table dimensions: 5000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmDistance between columns: 2500 mm Milling head Head type: C5E- 2 axis continuous headTool clamping system: HydraulicTaper nose: BT 50Speed range: 40 - 4000 rpmSpindle power: 37 kW / 372 Nm Feedrates Feedrate: 2 - 5000 mm/minX-Y,Z Rapid feedrate: 7200 / 12000 mm/min Weight and dimensions Max Weight on table: 25000 kgMachine weight: 40500 kgMachine dimensions: 12700 x 5070  x 4900 mm Accesories Guarding   Automatic tool changer: ATC-60Electronic handwheel: New SIEMENS 6FX2007-1AC04 Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request   View all technical features

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 1,065 mm, table length: 5,000 mm, mount diameter: 50 mm, total height: 39,900 mm, total width: 48,500 mm, total length: 100,000 mm, overall weight: 20,000 kg, power: 0.03 kW (0.04 HP), X-axis: 4300mm Y-axis: 1200mm Z-Axis: 1460mm Table Length: 5000mm Table Width: 1065mm Table load: 20000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: Bt 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Itsdpfjrx Rkmox Aacon Working hours: 25000H Length: 10000mm Width: 4850mm Height: 3990mm Weight: 20000kg

Condition: like new (used), Year of construction: 2011, Retrofitted: 2025 Itjdpfxjwk Rpdo Aacon Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 2300 x 900 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mmY axis traverse: 1000 mmZ axis traverse: 1000 mm Milling head Head type: Manual milling head (U22)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 20 - 3000 r.p.m. (4000 r.p.m.)Spindle power: 22 kW Feedrates Rapid feedrate (X-Y-Z):   20000 mm/min Weight and dimensions Maximum weight on table: 3500 kgMachine weight approx.: 14000 kgMachine dimensions approx.: 6114 x 5070 x 2803 mm Accesories External coolantElectronic handwheel: HR-510New foot clamping tool pedalGuarding and new perimetral safety fence installation Sales conditions Warranty: 6 months mechanical partsSale conditions and price: On request View all technical features

Condition: like new (used), Year of construction: 1992, Retrofitted: 2023 Itodpfsugbqyjx Aacen Numerical control: SELCA 4045D Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 1200 mmZ axis traverse: 1250 mm Milling head Head type: Universal manualTool clamping system: HydraulicTaper nose: ISO 50 (DIN 2080)  /  Pull stud: DIN 69872Speed range: 20 - 2000 rpmSpindle power: 22 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 23500 kgMachine dimensions approx.: 11100 x 5392 x 3400 mm Accesories  Electronic handwheel: Joystick SELBOX S2External coolantGuarding Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: like new (used), Year of construction: 2001, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC426 Technical features Dimensions Table dimensions: 3500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mmY axis traverse: 1200 mmZ axis traverse: 1000 mm Milling head Head type: Universal manual long face (UL40)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,6 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 20000 kgMachine dimensions approx.: 7900 x 4670 x 2900 mm Accesories External high pressure through spindle coolantElectronic handwheel: HR-130Guarding Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features Itsdpfxsugbq Ts Aacjn

Condition: like new (used), Year of construction: 1996, Retrofitted: 2023 Iodpjugbrkefx Aacotn Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 3000 x 1250 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 1800 mmDistance between columns: 1680 mmZ axis traverse: 800 mm Milling head Head type: Standard vertical spindleTool clamping system: HydraulicTaper nose: ISO 50Speed range: 20 - 2000 r.p.m.Spindle power: 22 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Max Weight on table: 10000 kgMachine weight: 21500 kgMachine dimensions: 7300 x 2690 x 3400 mm Accesories Guarding: YesCoolant: ExternalElectronic handwheel: HR-330 Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features