Used Key Way Milling Machine for sale (70,842)

Condition: ready for operation (used), Year of construction: 1981, feed length X-axis: 1,300 mm, feed length Y-axis: 700 mm, feed length Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, table width: 460 mm, table length: 1,635 mm, overall weight: 3,800 kg, visual 3-axis Bodjyf Af Sjpfx Afnowh

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! Zonder freeskop kunt u klassieke verticale bewerkingen uitvoeren. Met de multihoekfrees (MA-25) kunt u veel verschillende vlakken bewerken. MA-25 2-assige freeskop - 30 kW - 2000 tpm - 1500 Nm koppel C-as bereik: 0-360° - 2,5° Bereik van de A-as: +/- 110° - 2,5° Koeling via spindel: 40 bar Totaal vermogen: 67 kW Geen foundation nodig! De Johnford DMC-serie brugfreesmachine met dubbele kolom en beweegbare tafel is vervaardigd uit een brug/kolomconstructie van gegoten Meehanite-ijzer, die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met C-frame. De brugfreesmachines zijn verkrijgbaar in uitvoeringen met beweegbare tafel en met schuifkolom (vaste tafel), met afmetingen variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De lange basisconstructie biedt volledige ondersteuning aan de tafel over de gehele Y-asbeweging van 130 cm, waardoor zeer zware werkstukken bewerkt kunnen worden. De Y- en Z-assen dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt. Dit maakt nauwkeurige bewerkingen en strakke toleranties mogelijk tijdens bewerkingen met hoge snelheid. Doordat er geen tafeloverhang is, worden de helling en de draaiing van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat de stijfheid verder verhoogt. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange levensduur van het gereedschap en een goede oppervlakteafwerking van het werkstuk. De combinatie van twee schroefbandtransporteurs en een rupsbandtransporteur garandeert een volledige spaanafvoer met minimale handmatige reiniging. Bovendien wordt eindige-elementenanalyse (FEA) gebruikt voor het ontwerp van elke brugfreesmachine, waarbij de effecten van realistische omstandigheden, zoals trillingen, warmte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm Bsdpfxoxp Sk Ds Afnewh

Condition: used, Year of construction: 2018, x-travel 762 mm y-travel 508 mm Bwodpsygm Tpefx Afnsh z-travel 508 mm control Haas

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9585, DECKEL Universal Milling and Drilling Machine Model: FP 2 Machine No.: 9585 Year of manufacture: 1978/79 Condition: Good, operational condition Travel distances: longitudinal: 400 mm vertical: 400 mm Bwjdpfxeygicas Afnsh horizontal: 200 mm

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: longitudinal: 400 mm vertical: 400 mm Bjdpfsygia Esx Afnewh horizontal: 200 mm Features: - Sliding vertical milling head - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements - Rotary table D:280 mm - Documentation Condition: workshop-tested

Condition: used, Year of construction: 1983, functionality: fully functional, We also offer this used milling machine DECKEL FP 3 AKTIV, year of manufacture 1983, currently located in Spain. Immediately available. Bsdpfx Afjygwqlsnewh Wiring diagram: 6004 004202 – Operating voltage: 380 V – Frequency: 50 Hz – Rated current: 21 A – The machine is equipped with an active 3-axis digital display from HEIDENHAIN. – Spindle speeds: 40–2500 rpm – Table dimensions: 800 x 420 mm – with 9 T-slots – Tool holder: SK 40 – Travel ranges X: approx. 500 mm, Y: approx. 400 mm, Z: approx. 400 mm.

Condition: new, - 2 pneumatic clamps - cooling - Material stop - documentation - 400V Bsdpfx Asgg N Taofnswh

Condition: used, Year of construction: 2007, machine/vehicle number: 195125, Weight: 5,040 kg, MAZATROL Matrix control, chip conveyor, tool changer, max. tool length: 210 mm, ATTENTION: Collection of this item only by prior arrangement!!! Bwedpeyciryofx Afneh

Condition: ready for operation (used), Year of construction: 1986, travel distance X-axis: 1,300 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 2,066 rpm, workpiece weight (max.): 3,500 kg, HEIDENHAIN display, 3 axes External electrical cabinet Spindle SA 40, max speed 2066 rpm Table 1635x460 mm Bjdeydv Udopfx Afnewh Travel 1300x700x550 mm Weight 3500 kg

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control 840 D sl Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 130 / 87 Nm tool taper SK 40 DIN 69871 table surface area 630 x 500 mm max. table load 300 kg Swivel range 115 (-110 / +5) ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm rapid traverse X/Y/Z: 24 m/min feed speeds X/Y/Z: 10.000 mm/min total power requirement 32 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DECKEL MAHO - DMU 50 - 5 Axis simultaneous - swivable rotary table Bjdpfxswntx Nj Afnjwh - pneumatic clamping device (Preparation)

Condition: used, The Servomill® UFM 8 V, a state-of-the-art Conventional Vertical Milling Machine from KNUTH, is designed to enhance efficiency and precision in various machining applications. With its horizontal spindle and swiveling vertical milling head, this robust machine boasts a wide speed range and a large clamping table that accommodates various workpieces and clamping devices. The Servomill’s advanced electronic features, including infinitely variable servomotor feed and electronic handwheels, provide users with the intuitive operation reminiscent of CNC systems without the need for programming. Ideal for repair workshops and training departments, the UFM 8 V combines conventional milling practices with significant advancements in reliability and maintenance-free operation, thanks to high-quality servo drives and preloaded ball screws. With an operational output of up to 5000 rpm and integrated features such as a coolant system and pneumatic tool clamping, this model promises both productivity and ease of use. Experience the next level of milling technology with the Servomill UFM 8 V. Request a quote today to see how this remarkable machine from the Conventional Vertical Milling Machines product group can elevate your production capabilities. Bwodpfsv Amixsx Afnjh

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm Bwedpfjycxiuox Afneh z-travel 400 mm Control Heidenhain iTNC530 total power requirement --- kW weight of the machine ca. ca. 5,0 t dimensions of the machine ca. 5,10 x 6,10 m

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Bwsdpox Tucmefx Afnoh Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), TOS milling machine FN 32, spindle taper SK 40, speed range 40–2000 rpm Bwjdoyf Efhepfx Afnoh

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Bwjdpjyg I Nfjfx Afnoh Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: used, Year of construction: 2002, operating hours: 161,168 h, machine/vehicle number: K411-010, Details: - New X-axis belt - Head was renewed in October 2025 for EUR 27,000.00 net (invoice available in the photos) Hour meter: - 161,168 hours Note: Bwsdpfxoyhavme Afnsh - The machine is sold without any toolholders or accessories!

Condition: good (used), Year of construction: 2015, functionality: fully functional, Model: Divisio 5100 Flexible Depaneling System with Servo Gripper Included: Tray transport line + 2× PARIO 500 Tray Stackers (Loader & Unloader) PCB sizes: approx. 70×50 mm to 450×250 mm | Thickness 0.8–2.4 mm Max. panel size: up to 460×460 mm Automatic transport width adjustment Bwjdsygk Nbspfx Afnoh Milling separation with X/Y/Z axes, 12-position tool changer, router bit breakage monitoring Camera system including fiducial recognition, code reading & milling quality inspection Automatic product changeover via code + variant verification Good/bad part sorting with reject chute/reject bin Tray handling up to 600×400 mm, stack height up to 400 mm, electric stacking axes Industrial vacuum cleaner (Ringler RI 334D4-ENT-H) with suction power monitoring ESD version (energy chains & pneumatics) Inline-capable (Interlock/SMEMA), suitable for series production Condition: Used

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 Bodpfxeyf H Ecj Afnewh spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min Bwsdpeyf H A Uefx Afnsh inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: used, Year of construction: 1997, machine/vehicle number: 11968, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, Used HERMLE universal milling machine model U 630 S, year of manufacture 1997, equipped with Heidenhain TNC 410 control and full safety enclosure. Bsdpfxjygwz Rs Afnswh Travels: X = 630 mm, Y = 500 mm, Z = 500 mm Table size: 900 x 528 mm, 7x T-slots 14 mm, spindle taper SK40 DIN 69871 Speeds: Gear stage 1 = 20–1,428.6 rpm, gear stage 2 = 1,428.6–7,000 rpm. Separate coolant tank 120 litres, Heidenhain electronic handwheel HS410, Heidenhain measuring probe TS 220 Includes mobile tool trolley for SK40 tool holders with approx. 80 tool holders included. The machine is located at our premises in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: used, Year of construction: 2005, x-travel 780 mm y-travel 560 mm z-travel 560 mm total power requirement --- kW weight of the machine ca. 12,0 t Bedjyb S Ibjpfx Afnowh dimensions of the machine ca. --- m

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 Bwjdpfewth Sbex Afnjh number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2016, x-travel 1270 mm y-travel 508 mm Bwedoyfw Dcopfx Afnoh z-travel 635 mm control Haas

Condition: used, Year of construction: 2013, machine/vehicle number: 5279, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, Year of construction 2013 Control system: SIEMENS Sinumerik 840D pl HSK 100-A tool holder TRAVEL horizontal-longitudinal X = 8,000 mm Vertical headstock slide Y = 1,600 mm Headstock horizontal-transverse Z = 1,300 mm FUNCTIONAL PROBE: m&h HSK 100 Bjdju Sppwspfx Afnjwh SIEMENS B-MPI HAND-HELD CONTROL UNIT TRAVELING WORK PLATFORM 3-SIDED SPRAY AND CHIP PROTECTION WALL CHIP CONVEYOR SPRAYING PLATE Sizes: Length: 10,000 mm Width: 2,500 mm WASHING GUN IN THE WORKROOM REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2000 l COLLISION MONITORING SYSTEM 2 CHANNEL pcs. 2 monitoring channels: - 1st collision monitoring orthogonal milling head (channel 1) - 2nd collision monitoring fork head (channel 2) PENDULUM MACHINING 3 WORK AREAS MILLING SURFACE INTERPOLATION (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATION For fork head, arranged on clamping plate Storage positions 10 Maximum tool weight kg 12.5 Maximum tool length mm 200 Maximum tool diameter mm 63 Maximum tool diameter when free mm 250 Neighboring position Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine 48 Maximum tool diameter with magazine filled to mm 125 Maximum tool diameter with mm 250 free adjacent positions Maximum tool length mm 500 - Maximum tool weight kg 25 Maximum tool load torque Nm 40 Tool holder HSK 100-A HEAD CHANGE MAGAZINE 1 pc.FORK HEAD WITH HIGH FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated high-frequency spindle - Tool holder HSK - A 63 DIN 69893 - Main drive power 20 kW at 100 % ED or 25 kW at 40 % ED - Speed range up to 20,000 1/min - Motor spindle bearing with permanent grease lubrication - Sealing air seal - Torque: 40 Nm at 100% ED, 50 Nm at 40% ED - Automatic tool clamping - Power transmission according to speed-performance diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast construction made of GGG 60 - Milling head, automatically swivels 180 x 1 degree - The resulting positions can therefore not only be approached via the CNC control, but also programmed and processed - Repeat accuracy at the spindle nose ±0.002 mm, part accuracy thus ±3 sec - HSK 100-A tool holder - The milling spindle is equipped with a hydromechanical quick tool clamping system - Tool pull-in force: 45 kN - Internal coolant supply form A-D - External coolant supply via shower ring - Speed range 22- 4,000 1/min MAIN DRIVE by a frequency-controlled liquid-cooled AC motor with - 32 kW drive power at 100% duty cycle, 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. - 637 Nm torque at 100% ED, 875 Nm at 40% ED

Condition: good (used), Internal article no.: 26022 Universal milling machine Deckel FP1 + Accessories (machine vice / dividing attachment / SK40 tool holders / tailstock) An M16 drawbar is installed in the milling head + Additionally, S20x2 drawbar Bodpjxxkwnjfx Afnowh The machine can be inspected under power.