Used Kallfass Universa 400 for sale (41)

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully automatic flow-pack machine for packaging products – regardless of their length – in a fully enclosed manner and without film overlap. The products are fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. Product detection is carried out using a light barrier. The feed belt can be easily adjusted to accommodate different product widths. The longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Worn parts and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing stamp: 450 mm Film: Half-tube film, approx. 12 - 80 µm Film roll outer diameter: max. 400 mm Film roll width: max. 600 mm Min. product length: 120 mm Min. product width: 80 mm Passage height: 200 mm Fpjdpjz A Dfqefx Aikjp Working height: 780 - 930 mm Power connection: 400 Volt three-phase, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Inspection and demonstrations are possible by arrangement in our premises. Functional guarantee, no warranty.

Condition: used, Vollautomatische Seitenschweißmaschine zur Verpackung von Produkten – unabhängig von ihrer Länge – mit Volleinschlag und ohne Folienüberlappung. Mit neuem Querstempel. Fully automatic side sealing machine for packaging products – regardless of their length – with full wrap and without film overlap. With new cross seal bar. Fpodjz Hwuaopfx Aikep Vollautomatische Seitenschweißmaschiene mit Einschweißtunnel - Fully-Automatic Side Sealer Kallfass Universa 400 - Mini 400 Year 2004 - Serial-No. M 05.04.226 Anlage bestehend aus / System consisting of: Handanlage / Hand fed Station MGZ 400 Seitenschweißmaschiene / Fully-Automatic Side Sealer Kallfass Universa 400 Einschweißtunnel / Shrink tunnel Kallfass Mini 400 Technische Daten / Technical Data: Länge Querstempel / Length of cross seal bar 450mm Verpackungsleistung [Takte/min] / Production speed max. up to 85 packs/min Produktlänge / Product length min. 80mm Arbeitshöhe (einstellbar) / Working height (adjustable) 780 mm – 930 mm Geschwindigkeit des Transportbandes / Speed of transport conveyor, fix: 20 m/min Folie: Halbrundfolie / Film centre-folded film, approx. 12 – 80micron Folienrolle, Kerndurchmesser / Außendurchmesser / Film roll, core diameter / outer diameter approx. 76 mm - max. 400 mm Breite der Folienrolle / Width of film reel max. 600mm Stromversorgung / Power supply 400 volts, 3-phase, 50 Hz, with protective earth conductor Nennkapazität / Rated capacity 3.5 kVA Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Fully automatic flow wrapping machine for packaging products—regardless of their length—in a complete wrap without film overlap. Product infeed is carried out via a conveyor belt, while simultaneously being wrapped in centerfold film using a forming shoulder. Product timing is achieved via a photoelectric sensor. The infeed conveyor can be easily adjusted to accommodate different product widths. Longitudinal sealing is produced by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical data: - Cross sealing bar: 450 mm - Film: centerfold film, approx. 12–80 µm - Max. film roll outer diameter: 400 mm - Max. film roll width: 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Pass-through height: 200 mm - Working height: 780–930 mm - Power supply: 400 Volt three-phase, 50 Hz, with protective earth Fpedpfsw Ddb Tjx Aikjp - Rated power: 3.5 kVA - Rated current: 5.1 A Inspection and demonstration can be arranged by appointment at our premises. Function guarantee, no warranty.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M 09.10.288, product width (max.): 700 mm, product length (min.): 120 mm, input voltage: 400 V, working height: 850 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 700 – Fully-Automatic Side Sealer + KALLFASS Schrinktunnel COMPAKT650 D Industrial packaging machine for shrink-wrapping larger products such as picture frames, furniture, insulation material and similar goods. Manufactured by Kallfass Verpackungsmaschinen GmbH (Germany), CE certified. Key specs: Max. production speed: up to 65 packs/min Cross seal bar width: 750 mm Max. sealing frame height clearance: 300 mm Min. product length: 120 mm Film: centre-folded or flat, 12–80 micron; reel diameter up to 400 mm, width up to 900 mm Permanently heated seal bar with exchangeable sealing ledge, maintenance-free, PLC temperature control Siemens S7 PLC with colour touchscreen operator interface (multi-language) Power: 400V, 50Hz, 3-phase, 3.5 kVA Dimensions: approx. 2500 x 1400 x 2100 mm Colour: Kallfass Anthracite Fodpfezwld Hsx Aikepp Complete with original technical documentation and CE declaration of conformity.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Kallfass Universa 500 with shrinking tunnel by Hugo Beck Kallfass Universa 500, manufactured in 2011 The system is available immediately. The price of the complete system includes the Universa 400. The machine is technically refurbished and in very good condition. Technical data: - Length of transverse sealing bar: 500mm - Sealing bar opening: max. 200mm Fpjdpfx Aiozn Un Aekop - Min. product length: 80mm - Automatic length adjustment to reduce the sealing gap - Film guide plate, available as an option - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing bar with replaceable sealing strip - Side sealing knives - Processable films: PE and PO - Year of manufacture: 2011 - Shrinking tunnel: Hugo Beck Transverse and side sealing are checked and refurbished. Infeed, outfeed, and transport belts are inspected and replaced if necessary. The machine will be available after inspection and repair. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow-pack machines for packaging products - regardless of their length - with complete wrapping and without film overlap. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. The product is detected by a light barrier. The feed belt can be easily adjusted for different product widths. After the product is wrapped in film, transverse sealing is performed using a continuously heated sealing system. Longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. The remaining film strip is collected on a film take-up reel. If required, we also offer installation and service for this or systems from other manufacturers. Subject to prior sale. The price is EXW. No guarantee for technical data.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Kallfass Universa 500 with shrinking tunnel from Hugo Beck Kallfass Universa 500, year of manufacture 2011. The system is immediately available. The price of the complete system includes the Universa 400. The machine has been technically overhauled and is in very good condition. Technical data: - Length of transverse sealing bar: 500mm - Sealing bar opening: max. 200mm - Min. product length: 80mm - Automatic length adjustment to reduce the sealing bar gap - Film guide plate, available as an option - Control: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing bar with replaceable sealing element - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2011 - Shrinking tunnel Hugo Beck Transverse and side sealing have been inspected and overhauled. Infeed, outfeed, and transport belts are inspected and replaced if necessary. The machine is available after inspection and repair. Installation of the system is included in Germany, Austria, and Switzerland. Fpedpfx Aezn Up Tjikep Fully automatic flow wrapping machines for packaging products – regardless of their length – in a complete wrap and without film overlap. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film via a forming shoulder. The product is detected by a light barrier. The feed belt can be easily adjusted to different product widths. After the product is wrapped with film, transverse sealing is carried out with a continuously heated sealing system. Longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and the sealing units can be adjusted manually. The remaining strip of film is collected on a film reel. If required, we also offer installation and service for this system or systems from other manufacturers. Subject to prior sale. The price is EXW. No guarantee for technical data.

Condition: used, Year of construction: 2007, functionality: fully functional, Universa 500 Servo with Kallfass Compact Tunnel Year of manufacture: 2007 The machine will be cleaned and overhauled prior to delivery. Installation and training in Western Europe and parts of Eastern Europe are included in the purchase price. The Universa 500 Servo is a film packaging machine with a continuous motion sealing bar. The output is specified as up to 100 cycles per minute, depending on the type of film and product. The sealing bar has a width of 550 mm. The maximum product height is 200 mm. Packaging performance depending on product and film: 100 cycles/min Length of cross sealing bar: 550 mm Max. passage height of sealing bar: 200 mm Min. product length: 80 mm Film: centre-folded film, approx. 12 - 80 µm Film roll holder: arranged at floor level for easy loading Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Conveyor speed: variable 10 - 40 m/min Sealing system: continuously heated sealing bar with replaceable sealing strip, temperature control and monitoring PLC user interface: Touch panel, SIEMENS TP 270 Programmable logic controller: SIMOTION® by SIEMENS® Film and product transport via vacuum conveyor to the continuous motion cross sealing unit Replaceable sealing strip; available in different profile shapes for optimal sealing seam quality depending on product and film Position-controlled product flow. No tedious readjustment of timing values required when changing formats or speed Power supply: 400 V three-phase, 50 Hz with protective earth, without cable and plug Fpjdpfjy Nxvpsx Aiksp Rated power: 5 kVA Rated current (at 400 V): 7.3 A Available languages: German, English, French

Condition: used, Year of construction: 2007, functionality: fully functional, Universa 500 Servo with Kallfass Compact Tunnel Year of manufacture: 2007 The machine will be cleaned and overhauled prior to delivery. Installation and training in Western Europe and parts of Eastern Europe are included in the purchase price. Fjdpfx Aiey Nx Dgokepp The Universa 500 Servo is a film packaging machine with a continuous motion sealing bar. The output is specified as up to 100 cycles per minute, depending on the type of film and product. The sealing bar has a width of 550 mm. The maximum product height is 200 mm. Packaging performance depending on product and film: 100 cycles/min Length of cross sealing bar: 550 mm Max. passage height of sealing bar: 200 mm Min. product length: 80 mm Film: centre-folded film, approx. 12 - 80 µm Film roll holder: arranged at floor level for easy loading Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Conveyor speed: variable 10 - 40 m/min Sealing system: continuously heated sealing bar with replaceable sealing strip, temperature control and monitoring PLC user interface: Touch panel, SIEMENS TP 270 Programmable logic controller: SIMOTION® by SIEMENS® Film and product transport via vacuum conveyor to the continuous motion cross sealing unit Replaceable sealing strip; available in different profile shapes for optimal sealing seam quality depending on product and film Position-controlled product flow. No tedious readjustment of timing values required when changing formats or speed Power supply: 400 V three-phase, 50 Hz with protective earth, without cable and plug Rated power: 5 kVA Rated current (at 400 V): 7.3 A Available languages: German, English, French

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Fpodpfxsxnzlhj Aikop Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: used, Year of construction: 2005, Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 UniversalYear 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video Fpjdpfx Asqxwk Toiksp We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Fully automatic flow pack machine for packaging products – regardless of their length – in a full wrap and without film overlap. Product infeed is via a conveyor belt while simultaneously wrapping into a center-folded film using a forming shoulder. Product separation is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is achieved by a continuous side sealing device. The height position of the forming shoulder and sealing units is manually adjustable. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Fedpjyybuijfx Aikjpp Technical data: Cross sealing bar: 850 mm Film: center-folded film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 900 mm Min. product length: 120 mm Pass-through height: 300 mm Working height: 780 - 930 mm Power supply: 400 Volt three-phase, 50 Hz with protective conductor Rated output: 3.5 kVA Rated current: 5.1 A Inspection and demonstrations are possible in our facilities by appointment. Functionality guarantee, no warranty.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: VD 09.16.1408, WITH SHRINK TUNNEL Commission No.: 25.150.71 Equipment / Additional information: Sealing frame dimensions: approx. 800 x 600 mm Packaging capacity: up to 20 cycles/minute (depending on the product and operation) Film roll width: max. 750 mm (suitable for center-folded or flat film; film thickness approx. 12 µm to 80 µm) Clearance height: approx. 100 – 400 mm // Working height: approx. 870 – 970 mm Sealing technology: Impulse sealing system with a Teflon-coated cutting/sealing wire (odorless) Fpodpfx Ais Ahng Nskop Typical applications: Printed materials (books, magazines) Glass products in multipacks General consumer goods and industrial items requiring shrink-film protection

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Fpjdpfx Aiew E Igvekjp Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact Shrink Wrapping Machine KC 8060/650 Universal Year of manufacture: 2002 Dimensions: approx. 3550 x 1350 x 1450 mm (L x W x H) Weight: approx. net 690 kg / gross 790 kg Technical data: Welding frame dimensions: 800 x 600 mm Film roll width: max. 750 mm Fpsdpoz A Dghjfx Aiksp Working height: 870 - 970 mm Passage height: 100 - 400 mm Power connection: 380 V three-phase Easy-to-operate angle welding machine, combined with a shrink tunnel. Particularly robust design for industrial use. Welding frame dimensions 800 x 600 mm. Proven impulse welding technology with a Teflon-coated separating welding wire for absolutely odorless operation. Equipped with a sealing mechanism as a clamping system to ensure precise adherence to the set welding time and for trouble-free separating welding, even with thick films. Inspection and demonstrations are possible by arrangement at our premises. Functional guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinking machine KC 5040/450 Universal Year of manufacture: 2006 Technical data: Welding frame dimensions: 500 x 400 mm Film roll width: max. 550 mm Working height: 870 - 970 mm Power connection: 380 V three-phase Easy-to-operate angle welding machine, combined with a shrinking tunnel. Particularly robust design for industrial use. Welding frame dimensions 500 x 400 mm. Proven impulse sealing technology with Teflon-coated separating wire for an absolutely odorless operation. Equipped with a sealing mechanism as a clamping system to ensure accurate adherence to the set sealing time and for problem-free separation welding, even with thick films. Inspection and demonstrations are possible by arrangement in our premises. Functional guarantee, no warranty. Fpodpfx Aezlrqpeiksp

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Manufacturer: Kallfass GmbH Model: Shrink Tunnel Universal 950 HV Year of manufacture: 2007 Dimensions: approx. 2540 x 1655 x 1600 mm (L x W x H) Weight: approx. net 750 kg / gross 820 kg Technical data: Tunnel passage width: 900 mm Tunnel passage height: 500 mm Length of heated tunnel hood: 1700 mm Length of additional insulation hood: 2200 mm Tunnel discharge, extended: approx. 600 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 39 kW Rated current at 400 V: 56 A in single operation Universally applicable, high-performance shrink tunnel with laterally adjustable air flaps and outlet openings, adjustable from the outside at the bottom, for precise control of hot air flow, ensuring optimal shrink results even with products of challenging shapes. The recirculation system, the tunnel hood with an additional dual-chamber system, and significantly increased overall insulation provide energy-efficient operation. Equipped with rod chain conveyor, infinitely variable speed control. Fpedpfx Aisyw Rm Ajkjp Functional guarantee, no warranty. Offer valid for 30 days, subject to prior sale. Please note that all machines are delivered without power cables.

Condition: used, Die Kallfass KC5050/400 Universal ist eine sehr kompakte Winkeleinschweißmaschine mit einem Schrumpftunnel.  The Kallfass KC5050/400 Universal is a very compact L-sealer with an integrated shrink tunnel. Halb-automatische Winkeleinschweißmaschine / Semi-Automatic Foil sealing machine Kallfass KC5040/450 Universal Year 2000 - Serial-No. FR 06.00.094 Schweißrahmenabmessungen / max. 500 x 400mm Folienrollenbreite / Foil width max. 550mm Tunneldurchlassbreite / Tunnel width max. 520mm Tunneldurchlasshöhe / Tunnel high max. 245mm Fahrbar auf Rollen / Mobile on mobile frame Nach dem Schweißen automatisch der Transport in den Schrumpftunnel  /After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Fsdpfxj Ahkzfo Aikepp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2020, Format: 0x0 Fodjzpgh Depfx Aikspp Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: good (used), Year of construction: 1989, It's going well; I also have about 100 kilograms of shrink wrap available. Fjdo Ad Uf Rspfx Aikopp

Condition: used, Year of construction: 1998, Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible. Fsdpfx Aisz Akv Sskjpp

Condition: repair required (used), Year of construction: 1999, functionality: not functional, KALLFASS KC5040/450 universal machine, manufactured in 1999, complete with operating manual, electrical wiring diagram, and parts list. The machine can be used as a source of spare parts or, with some skill, be restored for further use. Equipment and condition can be seen in the attached photos. The price is ex works, unpacked, and excluding VAT. Fjdjzmyguopfx Aikspp If you have any questions or require additional detailed photos, please do not hesitate to contact us.

Condition: excellent (used), Dimensions of the entrance opening 400x200 Dimensions Length 2995 mm Width 1250 mm Height 1550 mm Fsdpfx Aijtrtztjkopp

Condition: excellent (used), functionality: fully functional, KALLFASS Foil packaging machine with shrink tunnel Fjdpfx Aowcnqcsikjpp Plant consists of: 1) Kallfass Universa 8060/200 foil wrapping & sealing 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - extra 4) Storage device for wrapped packages - extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos Please phone or mail

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use. Fpodpfeq Htfnjx Aiksp

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: P5 4040/400 NT, Manufacturer: Kallfass GmbH Type: P5 4040/400 NT Year of manufacture: 2003 Technical data: Welding frame dimensions: 400 x 400 mm Film roll width: max. 500 mm Working height: 870 - 970 mm Power connection: 380 V three-phase Easy-to-operate angle welding machine, combined with a shrink tunnel. Fpsdpfx Aozkcalsikop Particularly robust design for industrial use. Welding frame dimensions: 400 x 400 mm. Proven impulse welding technology with Teflon-coated separating welding wire for an absolutely odorless working process. Equipped with a sealing mechanism as a press-down system to ensure accurate adherence to the set welding time and to allow for trouble-free separating welding, even with thick films. Inspection and demonstrations are possible by appointment at our premises.